# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/interrupt-controller/samsung,exynos4210-combiner.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Samsung Exynos SoC Interrupt Combiner Controller

maintainers:
  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

description: |
  Samsung's Exynos4 architecture includes a interrupt combiner controller which
  can combine interrupt sources as a group and provide a single interrupt
  request for the group. The interrupt request from each group are connected to
  a parent interrupt controller, such as GIC in case of Exynos4210.

  The interrupt combiner controller consists of multiple combiners. Up to eight
  interrupt sources can be connected to a combiner. The combiner outputs one
  combined interrupt for its eight interrupt sources. The combined interrupt is
  usually connected to a parent interrupt controller.

  A single node in the device tree is used to describe the interrupt combiner
  controller module (which includes multiple combiners). A combiner in the
  interrupt controller module shares config/control registers with other
  combiners. For example, a 32-bit interrupt enable/disable config register can
  accommodate up to 4 interrupt combiners (with each combiner supporting up to
  8 interrupt sources).

allOf:
  - $ref: /schemas/interrupt-controller.yaml#

properties:
  compatible:
    const: samsung,exynos4210-combiner

  interrupt-controller: true

  interrupts:
    minItems: 8
    maxItems: 32

  "#interrupt-cells":
    description: |
      The meaning of the cells are:
        * First Cell: Combiner Group Number.
        * Second Cell: Interrupt number within the group.
    const: 2

  reg:
    maxItems: 1

  samsung,combiner-nr:
    description: |
      The number of interrupt combiners supported.  Should match number
      of interrupts set in "interrupts" property.
    $ref: /schemas/types.yaml#/definitions/uint32
    minimum: 8
    maximum: 32
    default: 16

required:
  - compatible
  - interrupt-controller
  - interrupts
  - "#interrupt-cells"
  - reg

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>

    interrupt-controller@10440000 {
        compatible = "samsung,exynos4210-combiner";
        interrupt-controller;
        #interrupt-cells = <2>;
        reg = <0x10440000 0x1000>;
        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
                     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
    };