blob: cc916eaeed0a14268190b56d99d2b94bd8000124 [file] [log] [blame]
* Microsemi MIPS CPUs
Boards with a SoC of the Microsemi MIPS family shall have the following
properties:
Required properties:
- compatible: "mscc,ocelot", "mscc,luton", "mscc,serval" or "mscc,jr2"
* Other peripherals:
o CPU chip regs:
The SoC has a few registers (DEVCPU_GCB:CHIP_REGS) handling miscellaneous
functionalities: chip ID, general purpose register for software use, reset
controller, hardware status and configuration, efuses.
Required properties:
- compatible: Should be "mscc,ocelot-chip-regs", "simple-mfd", "syscon"
- reg : Should contain registers location and length
Example:
syscon@71070000 {
compatible = "mscc,ocelot-chip-regs", "simple-mfd", "syscon";
reg = <0x71070000 0x1c>;
};
o CPU system control:
The SoC has a few registers (ICPU_CFG:CPU_SYSTEM_CTRL) handling configuration of
the CPU: 8 general purpose registers, reset control, CPU en/disabling, CPU
endianness, CPU bus control, CPU status.
Required properties:
- compatible: Should be "mscc,ocelot-cpu-syscon", "syscon"
- reg : Should contain registers location and length
Example:
syscon@70000000 {
compatible = "mscc,ocelot-cpu-syscon", "syscon";
reg = <0x70000000 0x2c>;
};
o HSIO regs:
The SoC has a few registers (HSIO) handling miscellaneous functionalities:
configuration and status of PLL5, RCOMP, SyncE, SerDes configurations and
status, SerDes muxing and a thermal sensor.
Required properties:
- compatible: Should be "mscc,ocelot-hsio", "syscon", "simple-mfd"
- reg : Should contain registers location and length
Example:
syscon@10d0000 {
compatible = "mscc,ocelot-hsio", "syscon", "simple-mfd";
reg = <0x10d0000 0x10000>;
};