# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: "http://devicetree.org/schemas/net/rockchip-dwmac.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"

title: Rockchip 10/100/1000 Ethernet driver(GMAC)

maintainers:
  - David Wu <david.wu@rock-chips.com>

# We need a select here so we don't match all nodes with 'snps,dwmac'
select:
  properties:
    compatible:
      contains:
        enum:
          - rockchip,px30-gmac
          - rockchip,rk3128-gmac
          - rockchip,rk3228-gmac
          - rockchip,rk3288-gmac
          - rockchip,rk3308-gmac
          - rockchip,rk3328-gmac
          - rockchip,rk3366-gmac
          - rockchip,rk3368-gmac
          - rockchip,rk3399-gmac
          - rockchip,rk3568-gmac
          - rockchip,rv1108-gmac
  required:
    - compatible

allOf:
  - $ref: "snps,dwmac.yaml#"

properties:
  compatible:
    oneOf:
      - items:
          - enum:
              - rockchip,px30-gmac
              - rockchip,rk3128-gmac
              - rockchip,rk3228-gmac
              - rockchip,rk3288-gmac
              - rockchip,rk3308-gmac
              - rockchip,rk3328-gmac
              - rockchip,rk3366-gmac
              - rockchip,rk3368-gmac
              - rockchip,rk3399-gmac
              - rockchip,rv1108-gmac
      - items:
          - enum:
              - rockchip,rk3568-gmac
          - const: snps,dwmac-4.20a

  clocks:
    minItems: 5
    maxItems: 8

  clock-names:
    contains:
      enum:
        - stmmaceth
        - mac_clk_tx
        - mac_clk_rx
        - aclk_mac
        - pclk_mac
        - clk_mac_ref
        - clk_mac_refout
        - clk_mac_speed

  clock_in_out:
    description:
      For RGMII, it must be "input", means main clock(125MHz)
      is not sourced from SoC's PLL, but input from PHY.
      For RMII, "input" means PHY provides the reference clock(50MHz),
      "output" means GMAC provides the reference clock.
    $ref: /schemas/types.yaml#/definitions/string
    enum: [input, output]

  rockchip,grf:
    description: The phandle of the syscon node for the general register file.
    $ref: /schemas/types.yaml#/definitions/phandle

  tx_delay:
    description: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default.
    $ref: /schemas/types.yaml#/definitions/uint32

  rx_delay:
    description: Delay value for RXD timing. Range value is 0~0x7F, 0x10 as default.
    $ref: /schemas/types.yaml#/definitions/uint32

  phy-supply:
    description: PHY regulator

required:
  - compatible
  - clocks
  - clock-names

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/clock/rk3288-cru.h>

    gmac: ethernet@ff290000 {
        compatible = "rockchip,rk3288-gmac";
        reg = <0xff290000 0x10000>;
        interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
        interrupt-names = "macirq";
        clocks = <&cru SCLK_MAC>,
                 <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
                 <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
                 <&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
        clock-names = "stmmaceth",
                      "mac_clk_rx", "mac_clk_tx",
                      "clk_mac_ref", "clk_mac_refout",
                      "aclk_mac", "pclk_mac";
        assigned-clocks = <&cru SCLK_MAC>;
        assigned-clock-parents = <&ext_gmac>;

        rockchip,grf = <&grf>;
        phy-mode = "rgmii";
        clock_in_out = "input";
        tx_delay = <0x30>;
        rx_delay = <0x10>;
    };