blob: 1727bf10897932ea0613d69307b06fd83e119fbb [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/power/rockchip-io-domain.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Rockchip SRAM for IO Voltage Domains
maintainers:
- Heiko Stuebner <heiko@sntech.de>
description: |
IO domain voltages on some Rockchip SoCs are variable but need to be
kept in sync between the regulators and the SoC using a special
register.
A specific example using rk3288
If the regulator hooked up to a pin like SDMMC0_VDD is 3.3V then
bit 7 of GRF_IO_VSEL needs to be 0. If the regulator hooked up to
that same pin is 1.8V then bit 7 of GRF_IO_VSEL needs to be 1.
Said another way, this driver simply handles keeping bits in the SoCs
General Register File (GRF) in sync with the actual value of a voltage
hooked up to the pins.
Note that this driver specifically does not include
any logic for deciding what voltage we should set regulators to
any logic for deciding whether regulators (or internal SoC blocks)
should have power or not have power
If there were some other software that had the smarts of making
decisions about regulators, it would work in conjunction with this
driver. When that other software adjusted a regulators voltage then
this driver would handle telling the SoC about it. A good example is
vqmmc for SD. In that case the dw_mmc driver simply is told about a
regulator. It changes the regulator between 3.3V and 1.8V at the
right time. This driver notices the change and makes sure that the
SoC is on the same page.
You specify supplies using the standard regulator bindings by including
a phandle the relevant regulator. All specified supplies must be able
to report their voltage. The IO Voltage Domain for any non-specified
supplies will be not be touched.
properties:
compatible:
enum:
- rockchip,px30-io-voltage-domain
- rockchip,px30-pmu-io-voltage-domain
- rockchip,rk3188-io-voltage-domain
- rockchip,rk3228-io-voltage-domain
- rockchip,rk3288-io-voltage-domain
- rockchip,rk3328-io-voltage-domain
- rockchip,rk3368-io-voltage-domain
- rockchip,rk3368-pmu-io-voltage-domain
- rockchip,rk3399-io-voltage-domain
- rockchip,rk3399-pmu-io-voltage-domain
- rockchip,rk3568-pmu-io-voltage-domain
- rockchip,rv1108-io-voltage-domain
- rockchip,rv1108-pmu-io-voltage-domain
required:
- compatible
unevaluatedProperties: false
allOf:
- $ref: "#/$defs/px30"
- $ref: "#/$defs/px30-pmu"
- $ref: "#/$defs/rk3188"
- $ref: "#/$defs/rk3228"
- $ref: "#/$defs/rk3288"
- $ref: "#/$defs/rk3328"
- $ref: "#/$defs/rk3368"
- $ref: "#/$defs/rk3368-pmu"
- $ref: "#/$defs/rk3399"
- $ref: "#/$defs/rk3399-pmu"
- $ref: "#/$defs/rk3568-pmu"
- $ref: "#/$defs/rv1108"
- $ref: "#/$defs/rv1108-pmu"
$defs:
px30:
if:
properties:
compatible:
contains:
const: rockchip,px30-io-voltage-domain
then:
properties:
vccio1-supply:
description: The supply connected to VCCIO1.
vccio2-supply:
description: The supply connected to VCCIO2.
vccio3-supply:
description: The supply connected to VCCIO3.
vccio4-supply:
description: The supply connected to VCCIO4.
vccio5-supply:
description: The supply connected to VCCIO5.
vccio6-supply:
description: The supply connected to VCCIO6.
vccio-oscgpi-supply:
description: The supply connected to VCCIO_OSCGPI.
px30-pmu:
if:
properties:
compatible:
contains:
const: rockchip,px30-pmu-io-voltage-domain
then:
properties:
pmuio1-supply:
description: The supply connected to PMUIO1.
pmuio2-supply:
description: The supply connected to PMUIO2.
rk3188:
if:
properties:
compatible:
contains:
const: rockchip,rk3188-io-voltage-domain
then:
properties:
ap0-supply:
description: The supply connected to AP0_VCC.
ap1-supply:
description: The supply connected to AP1_VCC.
cif-supply:
description: The supply connected to CIF_VCC.
flash-supply:
description: The supply connected to FLASH_VCC.
lcdc0-supply:
description: The supply connected to LCD0_VCC.
lcdc1-supply:
description: The supply connected to LCD1_VCC.
vccio0-supply:
description: The supply connected to VCCIO0.
vccio1-supply:
description: The supply connected to VCCIO1. Also labeled as VCCIO2.
rk3228:
if:
properties:
compatible:
contains:
const: rockchip,rk3228-io-voltage-domain
then:
properties:
vccio1-supply:
description: The supply connected to VCCIO1.
vccio2-supply:
description: The supply connected to VCCIO2.
vccio3-supply:
description: The supply connected to VCCIO3.
vccio4-supply:
description: The supply connected to VCCIO4.
rk3288:
if:
properties:
compatible:
contains:
const: rockchip,rk3288-io-voltage-domain
then:
properties:
audio-supply:
description: The supply connected to APIO4_VDD.
bb-supply:
description: The supply connected to APIO5_VDD.
dvp-supply:
description: The supply connected to DVPIO_VDD.
flash0-supply:
description: The supply connected to FLASH0_VDD. Typically for eMMC.
flash1-supply:
description: The supply connected to FLASH1_VDD. Also known as SDIO1.
gpio30-supply:
description: The supply connected to APIO1_VDD.
gpio1830-supply:
description: The supply connected to APIO2_VDD.
lcdc-supply:
description: The supply connected to LCDC_VDD.
sdcard-supply:
description: The supply connected to SDMMC0_VDD.
wifi-supply:
description: The supply connected to APIO3_VDD. Also known as SDIO0.
rk3328:
if:
properties:
compatible:
contains:
const: rockchip,rk3328-io-voltage-domain
then:
properties:
vccio1-supply:
description: The supply connected to VCCIO1.
vccio2-supply:
description: The supply connected to VCCIO2.
vccio3-supply:
description: The supply connected to VCCIO3.
vccio4-supply:
description: The supply connected to VCCIO4.
vccio5-supply:
description: The supply connected to VCCIO5.
vccio6-supply:
description: The supply connected to VCCIO6.
pmuio-supply:
description: The supply connected to VCCIO_PMU.
rk3368:
if:
properties:
compatible:
contains:
const: rockchip,rk3368-io-voltage-domain
then:
properties:
audio-supply:
description: The supply connected to APIO3_VDD.
dvp-supply:
description: The supply connected to DVPIO_VDD.
flash0-supply:
description: The supply connected to FLASH0_VDD. Typically for eMMC.
gpio30-supply:
description: The supply connected to APIO1_VDD.
gpio1830-supply:
description: The supply connected to APIO4_VDD.
sdcard-supply:
description: The supply connected to SDMMC0_VDD.
wifi-supply:
description: The supply connected to APIO2_VDD. Also known as SDIO0.
rk3368-pmu:
if:
properties:
compatible:
contains:
const: rockchip,rk3368-pmu-io-voltage-domain
then:
properties:
pmu-supply:
description: The supply connected to PMUIO_VDD.
vop-supply:
description: The supply connected to LCDC_VDD.
rk3399:
if:
properties:
compatible:
contains:
const: rockchip,rk3399-io-voltage-domain
then:
properties:
audio-supply:
description: The supply connected to APIO5_VDD.
bt656-supply:
description: The supply connected to APIO2_VDD.
gpio1830-supply:
description: The supply connected to APIO4_VDD.
sdmmc-supply:
description: The supply connected to SDMMC0_VDD.
rk3399-pmu:
if:
properties:
compatible:
contains:
const: rockchip,rk3399-pmu-io-voltage-domain
then:
properties:
pmu1830-supply:
description: The supply connected to PMUIO2_VDD.
rk3568-pmu:
if:
properties:
compatible:
contains:
const: rockchip,rk3568-pmu-io-voltage-domain
then:
properties:
pmuio1-supply:
description: The supply connected to PMUIO1.
pmuio2-supply:
description: The supply connected to PMUIO2.
vccio1-supply:
description: The supply connected to VCCIO1.
vccio2-supply:
description: The supply connected to VCCIO2.
vccio3-supply:
description: The supply connected to VCCIO3.
vccio4-supply:
description: The supply connected to VCCIO4.
vccio5-supply:
description: The supply connected to VCCIO5.
vccio6-supply:
description: The supply connected to VCCIO6.
vccio7-supply:
description: The supply connected to VCCIO7.
rv1108:
if:
properties:
compatible:
contains:
const: rockchip,rv1108-io-voltage-domain
then:
properties:
vccio1-supply:
description: The supply connected to APIO1_VDD.
vccio2-supply:
description: The supply connected to APIO2_VDD.
vccio3-supply:
description: The supply connected to APIO3_VDD.
vccio5-supply:
description: The supply connected to APIO5_VDD.
vccio6-supply:
description: The supply connected to APIO6_VDD.
rv1108-pmu:
if:
properties:
compatible:
contains:
const: rockchip,rv1108-pmu-io-voltage-domain
then:
properties:
pmu-supply:
description: The supply connected to PMUIO_VDD.
examples:
- |
io-domains {
compatible = "rockchip,rk3288-io-voltage-domain";
audio-supply = <&vcc18_codec>;
bb-supply = <&vcc33_io>;
dvp-supply = <&vcc_18>;
flash0-supply = <&vcc18_flashio>;
gpio1830-supply = <&vcc33_io>;
gpio30-supply = <&vcc33_pmuio>;
lcdc-supply = <&vcc33_lcd>;
sdcard-supply = <&vccio_sd>;
wifi-supply = <&vcc18_wl>;
};