# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/mt8195-afe-pcm.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Mediatek AFE PCM controller for mt8195

maintainers:
  - Trevor Wu <trevor.wu@mediatek.com>

properties:
  compatible:
    const: mediatek,mt8195-audio

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  mediatek,topckgen:
    $ref: "/schemas/types.yaml#/definitions/phandle"
    description: The phandle of the mediatek topckgen controller

  power-domains:
    maxItems: 1

  clocks:
    items:
      - description: 26M clock
      - description: audio pll1 clock
      - description: audio pll2 clock
      - description: clock divider for i2si1_mck
      - description: clock divider for i2si2_mck
      - description: clock divider for i2so1_mck
      - description: clock divider for i2so2_mck
      - description: clock divider for dptx_mck
      - description: a1sys hoping clock
      - description: audio intbus clock
      - description: audio hires clock
      - description: audio local bus clock
      - description: mux for dptx_mck
      - description: mux for i2so1_mck
      - description: mux for i2so2_mck
      - description: mux for i2si1_mck
      - description: mux for i2si2_mck
      - description: audio infra 26M clock
      - description: infra bus clock

  clock-names:
    items:
      - const: clk26m
      - const: apll1_ck
      - const: apll2_ck
      - const: apll12_div0
      - const: apll12_div1
      - const: apll12_div2
      - const: apll12_div3
      - const: apll12_div9
      - const: a1sys_hp_sel
      - const: aud_intbus_sel
      - const: audio_h_sel
      - const: audio_local_bus_sel
      - const: dptx_m_sel
      - const: i2so1_m_sel
      - const: i2so2_m_sel
      - const: i2si1_m_sel
      - const: i2si2_m_sel
      - const: infra_ao_audio_26m_b
      - const: scp_adsp_audiodsp

  mediatek,etdm-in1-chn-disabled:
    $ref: /schemas/types.yaml#/definitions/uint8-array
    maxItems: 24
    description: Specify which input channel should be disabled.

  mediatek,etdm-in2-chn-disabled:
    $ref: /schemas/types.yaml#/definitions/uint8-array
    maxItems: 16
    description: Specify which input channel should be disabled.

patternProperties:
  "^mediatek,etdm-in[1-2]-mclk-always-on-rate-hz$":
    description: Specify etdm in mclk output rate for always on case.

  "^mediatek,etdm-out[1-3]-mclk-always-on-rate-hz$":
    description: Specify etdm out mclk output rate for always on case.

  "^mediatek,etdm-in[1-2]-multi-pin-mode$":
    type: boolean
    description: if present, the etdm data mode is I2S.

  "^mediatek,etdm-out[1-3]-multi-pin-mode$":
    type: boolean
    description: if present, the etdm data mode is I2S.

  "^mediatek,etdm-in[1-2]-cowork-source$":
    $ref: /schemas/types.yaml#/definitions/uint32
    description: |
      etdm modules can share the same external clock pin. Specify
      which etdm clock source is required by this etdm in moudule.
    enum:
      - 0 # etdm1_in
      - 1 # etdm2_in
      - 2 # etdm1_out
      - 3 # etdm2_out

  "^mediatek,etdm-out[1-2]-cowork-source$":
    $ref: /schemas/types.yaml#/definitions/uint32
    description: |
      etdm modules can share the same external clock pin. Specify
      which etdm clock source is required by this etdm out moudule.
    enum:
      - 0 # etdm1_in
      - 1 # etdm2_in
      - 2 # etdm1_out
      - 3 # etdm2_out

required:
  - compatible
  - reg
  - interrupts
  - mediatek,topckgen
  - power-domains
  - clocks
  - clock-names

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/interrupt-controller/irq.h>

    afe: mt8195-afe-pcm@10890000 {
        compatible = "mediatek,mt8195-audio";
        reg = <0x10890000 0x10000>;
        interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>;
        mediatek,topckgen = <&topckgen>;
        power-domains = <&spm 7>; //MT8195_POWER_DOMAIN_AUDIO
        clocks = <&clk26m>,
                 <&topckgen 163>, //CLK_TOP_APLL1
                 <&topckgen 166>, //CLK_TOP_APLL2
                 <&topckgen 233>, //CLK_TOP_APLL12_DIV0
                 <&topckgen 234>, //CLK_TOP_APLL12_DIV1
                 <&topckgen 235>, //CLK_TOP_APLL12_DIV2
                 <&topckgen 236>, //CLK_TOP_APLL12_DIV3
                 <&topckgen 238>, //CLK_TOP_APLL12_DIV9
                 <&topckgen 100>, //CLK_TOP_A1SYS_HP_SEL
                 <&topckgen 33>, //CLK_TOP_AUD_INTBUS_SEL
                 <&topckgen 34>, //CLK_TOP_AUDIO_H_SEL
                 <&topckgen 107>, //CLK_TOP_AUDIO_LOCAL_BUS_SEL
                 <&topckgen 98>, //CLK_TOP_DPTX_M_SEL
                 <&topckgen 94>, //CLK_TOP_I2SO1_M_SEL
                 <&topckgen 95>, //CLK_TOP_I2SO2_M_SEL
                 <&topckgen 96>, //CLK_TOP_I2SI1_M_SEL
                 <&topckgen 97>, //CLK_TOP_I2SI2_M_SEL
                 <&infracfg_ao 50>, //CLK_INFRA_AO_AUDIO_26M_B
                 <&scp_adsp 0>; //CLK_SCP_ADSP_AUDIODSP
        clock-names = "clk26m",
                      "apll1_ck",
                      "apll2_ck",
                      "apll12_div0",
                      "apll12_div1",
                      "apll12_div2",
                      "apll12_div3",
                      "apll12_div9",
                      "a1sys_hp_sel",
                      "aud_intbus_sel",
                      "audio_h_sel",
                      "audio_local_bus_sel",
                      "dptx_m_sel",
                      "i2so1_m_sel",
                      "i2so2_m_sel",
                      "i2si1_m_sel",
                      "i2si2_m_sel",
                      "infra_ao_audio_26m_b",
                      "scp_adsp_audiodsp";
    };

...