blob: 80a288c59e56da63d639f638bd86c8eb4834bafe [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2020 SiFive, Inc.
* Copyright (C) 2020 Zong Li
*/
#include <linux/clkdev.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/of_device.h>
#include "sifive-prci.h"
#include "fu540-prci.h"
#include "fu740-prci.h"
static const struct prci_clk_desc prci_clk_fu540 = {
.clks = __prci_init_clocks_fu540,
.num_clks = ARRAY_SIZE(__prci_init_clocks_fu540),
};
/*
* Private functions
*/
/**
* __prci_readl() - read from a PRCI register
* @pd: PRCI context
* @offs: register offset to read from (in bytes, from PRCI base address)
*
* Read the register located at offset @offs from the base virtual
* address of the PRCI register target described by @pd, and return
* the value to the caller.
*
* Context: Any context.
*
* Return: the contents of the register described by @pd and @offs.
*/
static u32 __prci_readl(struct __prci_data *pd, u32 offs)
{
return readl_relaxed(pd->va + offs);
}
static void __prci_writel(u32 v, u32 offs, struct __prci_data *pd)
{
writel_relaxed(v, pd->va + offs);
}
/* WRPLL-related private functions */
/**
* __prci_wrpll_unpack() - unpack WRPLL configuration registers into parameters
* @c: ptr to a struct wrpll_cfg record to write config into
* @r: value read from the PRCI PLL configuration register
*
* Given a value @r read from an FU740 PRCI PLL configuration register,
* split it into fields and populate it into the WRPLL configuration record
* pointed to by @c.
*
* The COREPLLCFG0 macros are used below, but the other *PLLCFG0 macros
* have the same register layout.
*
* Context: Any context.
*/
static void __prci_wrpll_unpack(struct wrpll_cfg *c, u32 r)
{
u32 v;
v = r & PRCI_COREPLLCFG0_DIVR_MASK;
v >>= PRCI_COREPLLCFG0_DIVR_SHIFT;
c->divr = v;
v = r & PRCI_COREPLLCFG0_DIVF_MASK;
v >>= PRCI_COREPLLCFG0_DIVF_SHIFT;
c->divf = v;
v = r & PRCI_COREPLLCFG0_DIVQ_MASK;
v >>= PRCI_COREPLLCFG0_DIVQ_SHIFT;
c->divq = v;
v = r & PRCI_COREPLLCFG0_RANGE_MASK;
v >>= PRCI_COREPLLCFG0_RANGE_SHIFT;
c->range = v;
c->flags &=
(WRPLL_FLAGS_INT_FEEDBACK_MASK | WRPLL_FLAGS_EXT_FEEDBACK_MASK);
/* external feedback mode not supported */
c->flags |= WRPLL_FLAGS_INT_FEEDBACK_MASK;
}
/**
* __prci_wrpll_pack() - pack PLL configuration parameters into a register value
* @c: pointer to a struct wrpll_cfg record containing the PLL's cfg
*
* Using a set of WRPLL configuration values pointed to by @c,
* assemble a PRCI PLL configuration register value, and return it to
* the caller.
*
* Context: Any context. Caller must ensure that the contents of the
* record pointed to by @c do not change during the execution
* of this function.
*
* Returns: a value suitable for writing into a PRCI PLL configuration
* register
*/
static u32 __prci_wrpll_pack(const struct wrpll_cfg *c)
{
u32 r = 0;
r |= c->divr << PRCI_COREPLLCFG0_DIVR_SHIFT;
r |= c->divf << PRCI_COREPLLCFG0_DIVF_SHIFT;
r |= c->divq << PRCI_COREPLLCFG0_DIVQ_SHIFT;
r |= c->range << PRCI_COREPLLCFG0_RANGE_SHIFT;
/* external feedback mode not supported */
r |= PRCI_COREPLLCFG0_FSE_MASK;
return r;
}
/**
* __prci_wrpll_read_cfg0() - read the WRPLL configuration from the PRCI
* @pd: PRCI context
* @pwd: PRCI WRPLL metadata
*
* Read the current configuration of the PLL identified by @pwd from
* the PRCI identified by @pd, and store it into the local configuration
* cache in @pwd.
*
* Context: Any context. Caller must prevent the records pointed to by
* @pd and @pwd from changing during execution.
*/
static void __prci_wrpll_read_cfg0(struct __prci_data *pd,
struct __prci_wrpll_data *pwd)
{
__prci_wrpll_unpack(&pwd->c, __prci_readl(pd, pwd->cfg0_offs));
}
/**
* __prci_wrpll_write_cfg0() - write WRPLL configuration into the PRCI
* @pd: PRCI context
* @pwd: PRCI WRPLL metadata
* @c: WRPLL configuration record to write
*
* Write the WRPLL configuration described by @c into the WRPLL
* configuration register identified by @pwd in the PRCI instance
* described by @c. Make a cached copy of the WRPLL's current
* configuration so it can be used by other code.
*
* Context: Any context. Caller must prevent the records pointed to by
* @pd and @pwd from changing during execution.
*/
static void __prci_wrpll_write_cfg0(struct __prci_data *pd,
struct __prci_wrpll_data *pwd,
struct wrpll_cfg *c)
{
__prci_writel(__prci_wrpll_pack(c), pwd->cfg0_offs, pd);
memcpy(&pwd->c, c, sizeof(*c));
}
/**
* __prci_wrpll_write_cfg1() - write Clock enable/disable configuration
* into the PRCI
* @pd: PRCI context
* @pwd: PRCI WRPLL metadata
* @enable: Clock enable or disable value
*/
static void __prci_wrpll_write_cfg1(struct __prci_data *pd,
struct __prci_wrpll_data *pwd,
u32 enable)
{
__prci_writel(enable, pwd->cfg1_offs, pd);
}
/*
* Linux clock framework integration
*
* See the Linux clock framework documentation for more information on
* these functions.
*/
unsigned long sifive_prci_wrpll_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
struct __prci_wrpll_data *pwd = pc->pwd;
return wrpll_calc_output_rate(&pwd->c, parent_rate);
}
long sifive_prci_wrpll_round_rate(struct clk_hw *hw,
unsigned long rate,
unsigned long *parent_rate)
{
struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
struct __prci_wrpll_data *pwd = pc->pwd;
struct wrpll_cfg c;
memcpy(&c, &pwd->c, sizeof(c));
wrpll_configure_for_rate(&c, rate, *parent_rate);
return wrpll_calc_output_rate(&c, *parent_rate);
}
int sifive_prci_wrpll_set_rate(struct clk_hw *hw,
unsigned long rate, unsigned long parent_rate)
{
struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
struct __prci_wrpll_data *pwd = pc->pwd;
struct __prci_data *pd = pc->pd;
int r;
r = wrpll_configure_for_rate(&pwd->c, rate, parent_rate);
if (r)
return r;
if (pwd->enable_bypass)
pwd->enable_bypass(pd);
__prci_wrpll_write_cfg0(pd, pwd, &pwd->c);
udelay(wrpll_calc_max_lock_us(&pwd->c));
return 0;
}
int sifive_clk_is_enabled(struct clk_hw *hw)
{
struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
struct __prci_wrpll_data *pwd = pc->pwd;
struct __prci_data *pd = pc->pd;
u32 r;
r = __prci_readl(pd, pwd->cfg1_offs);
if (r & PRCI_COREPLLCFG1_CKE_MASK)
return 1;
else
return 0;
}
int sifive_prci_clock_enable(struct clk_hw *hw)
{
struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
struct __prci_wrpll_data *pwd = pc->pwd;
struct __prci_data *pd = pc->pd;
if (sifive_clk_is_enabled(hw))
return 0;
__prci_wrpll_write_cfg1(pd, pwd, PRCI_COREPLLCFG1_CKE_MASK);
if (pwd->disable_bypass)
pwd->disable_bypass(pd);
return 0;
}
void sifive_prci_clock_disable(struct clk_hw *hw)
{
struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
struct __prci_wrpll_data *pwd = pc->pwd;
struct __prci_data *pd = pc->pd;
u32 r;
if (pwd->enable_bypass)
pwd->enable_bypass(pd);
r = __prci_readl(pd, pwd->cfg1_offs);
r &= ~PRCI_COREPLLCFG1_CKE_MASK;
__prci_wrpll_write_cfg1(pd, pwd, r);
}
/* TLCLKSEL clock integration */
unsigned long sifive_prci_tlclksel_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
struct __prci_data *pd = pc->pd;
u32 v;
u8 div;
v = __prci_readl(pd, PRCI_CLKMUXSTATUSREG_OFFSET);
v &= PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK;
div = v ? 1 : 2;
return div_u64(parent_rate, div);
}
/* HFPCLK clock integration */
unsigned long sifive_prci_hfpclkplldiv_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
struct __prci_data *pd = pc->pd;
u32 div = __prci_readl(pd, PRCI_HFPCLKPLLDIV_OFFSET);
return div_u64(parent_rate, div + 2);
}
/*
* Core clock mux control
*/
/**
* sifive_prci_coreclksel_use_hfclk() - switch the CORECLK mux to output HFCLK
* @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
*
* Switch the CORECLK mux to the HFCLK input source; return once complete.
*
* Context: Any context. Caller must prevent concurrent changes to the
* PRCI_CORECLKSEL_OFFSET register.
*/
void sifive_prci_coreclksel_use_hfclk(struct __prci_data *pd)
{
u32 r;
r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
r |= PRCI_CORECLKSEL_CORECLKSEL_MASK;
__prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
}
/**
* sifive_prci_coreclksel_use_corepll() - switch the CORECLK mux to output
* COREPLL
* @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
*
* Switch the CORECLK mux to the COREPLL output clock; return once complete.
*
* Context: Any context. Caller must prevent concurrent changes to the
* PRCI_CORECLKSEL_OFFSET register.
*/
void sifive_prci_coreclksel_use_corepll(struct __prci_data *pd)
{
u32 r;
r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK;
__prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
}
/**
* sifive_prci_coreclksel_use_final_corepll() - switch the CORECLK mux to output
* FINAL_COREPLL
* @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
*
* Switch the CORECLK mux to the final COREPLL output clock; return once
* complete.
*
* Context: Any context. Caller must prevent concurrent changes to the
* PRCI_CORECLKSEL_OFFSET register.
*/
void sifive_prci_coreclksel_use_final_corepll(struct __prci_data *pd)
{
u32 r;
r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK;
__prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
}
/**
* sifive_prci_corepllsel_use_dvfscorepll() - switch the COREPLL mux to
* output DVFS_COREPLL
* @pd: struct __prci_data * for the PRCI containing the COREPLL mux reg
*
* Switch the COREPLL mux to the DVFSCOREPLL output clock; return once complete.
*
* Context: Any context. Caller must prevent concurrent changes to the
* PRCI_COREPLLSEL_OFFSET register.
*/
void sifive_prci_corepllsel_use_dvfscorepll(struct __prci_data *pd)
{
u32 r;
r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET);
r |= PRCI_COREPLLSEL_COREPLLSEL_MASK;
__prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd);
r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); /* barrier */
}
/**
* sifive_prci_corepllsel_use_corepll() - switch the COREPLL mux to
* output COREPLL
* @pd: struct __prci_data * for the PRCI containing the COREPLL mux reg
*
* Switch the COREPLL mux to the COREPLL output clock; return once complete.
*
* Context: Any context. Caller must prevent concurrent changes to the
* PRCI_COREPLLSEL_OFFSET register.
*/
void sifive_prci_corepllsel_use_corepll(struct __prci_data *pd)
{
u32 r;
r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET);
r &= ~PRCI_COREPLLSEL_COREPLLSEL_MASK;
__prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd);
r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); /* barrier */
}
/**
* sifive_prci_hfpclkpllsel_use_hfclk() - switch the HFPCLKPLL mux to
* output HFCLK
* @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux reg
*
* Switch the HFPCLKPLL mux to the HFCLK input source; return once complete.
*
* Context: Any context. Caller must prevent concurrent changes to the
* PRCI_HFPCLKPLLSEL_OFFSET register.
*/
void sifive_prci_hfpclkpllsel_use_hfclk(struct __prci_data *pd)
{
u32 r;
r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET);
r |= PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK;
__prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd);
r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */
}
/**
* sifive_prci_hfpclkpllsel_use_hfpclkpll() - switch the HFPCLKPLL mux to
* output HFPCLKPLL
* @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux reg
*
* Switch the HFPCLKPLL mux to the HFPCLKPLL output clock; return once complete.
*
* Context: Any context. Caller must prevent concurrent changes to the
* PRCI_HFPCLKPLLSEL_OFFSET register.
*/
void sifive_prci_hfpclkpllsel_use_hfpclkpll(struct __prci_data *pd)
{
u32 r;
r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET);
r &= ~PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK;
__prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd);
r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */
}
/* PCIE AUX clock APIs for enable, disable. */
int sifive_prci_pcie_aux_clock_is_enabled(struct clk_hw *hw)
{
struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
struct __prci_data *pd = pc->pd;
u32 r;
r = __prci_readl(pd, PRCI_PCIE_AUX_OFFSET);
if (r & PRCI_PCIE_AUX_EN_MASK)
return 1;
else
return 0;
}
int sifive_prci_pcie_aux_clock_enable(struct clk_hw *hw)
{
struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
struct __prci_data *pd = pc->pd;
u32 r __maybe_unused;
if (sifive_prci_pcie_aux_clock_is_enabled(hw))
return 0;
__prci_writel(1, PRCI_PCIE_AUX_OFFSET, pd);
r = __prci_readl(pd, PRCI_PCIE_AUX_OFFSET); /* barrier */
return 0;
}
void sifive_prci_pcie_aux_clock_disable(struct clk_hw *hw)
{
struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
struct __prci_data *pd = pc->pd;
u32 r __maybe_unused;
__prci_writel(0, PRCI_PCIE_AUX_OFFSET, pd);
r = __prci_readl(pd, PRCI_PCIE_AUX_OFFSET); /* barrier */
}
/**
* __prci_register_clocks() - register clock controls in the PRCI
* @dev: Linux struct device
* @pd: The pointer for PRCI per-device instance data
* @desc: The pointer for the information of clocks of each SoCs
*
* Register the list of clock controls described in __prci_init_clocks[] with
* the Linux clock framework.
*
* Return: 0 upon success or a negative error code upon failure.
*/
static int __prci_register_clocks(struct device *dev, struct __prci_data *pd,
const struct prci_clk_desc *desc)
{
struct clk_init_data init = { };
struct __prci_clock *pic;
int parent_count, i, r;
parent_count = of_clk_get_parent_count(dev->of_node);
if (parent_count != EXPECTED_CLK_PARENT_COUNT) {
dev_err(dev, "expected only two parent clocks, found %d\n",
parent_count);
return -EINVAL;
}
/* Register PLLs */
for (i = 0; i < desc->num_clks; ++i) {
pic = &(desc->clks[i]);
init.name = pic->name;
init.parent_names = &pic->parent_name;
init.num_parents = 1;
init.ops = pic->ops;
pic->hw.init = &init;
pic->pd = pd;
if (pic->pwd)
__prci_wrpll_read_cfg0(pd, pic->pwd);
r = devm_clk_hw_register(dev, &pic->hw);
if (r) {
dev_warn(dev, "Failed to register clock %s: %d\n",
init.name, r);
return r;
}
r = clk_hw_register_clkdev(&pic->hw, pic->name, dev_name(dev));
if (r) {
dev_warn(dev, "Failed to register clkdev for %s: %d\n",
init.name, r);
return r;
}
pd->hw_clks.hws[i] = &pic->hw;
}
pd->hw_clks.num = i;
r = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
&pd->hw_clks);
if (r) {
dev_err(dev, "could not add hw_provider: %d\n", r);
return r;
}
return 0;
}
/**
* sifive_prci_probe() - initialize prci data and check parent count
* @pdev: platform device pointer for the prci
*
* Return: 0 upon success or a negative error code upon failure.
*/
static int sifive_prci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct resource *res;
struct __prci_data *pd;
const struct prci_clk_desc *desc;
int r;
desc = of_device_get_match_data(&pdev->dev);
pd = devm_kzalloc(dev, struct_size(pd, hw_clks.hws, desc->num_clks), GFP_KERNEL);
if (!pd)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pd->va = devm_ioremap_resource(dev, res);
if (IS_ERR(pd->va))
return PTR_ERR(pd->va);
pd->reset.rcdev.owner = THIS_MODULE;
pd->reset.rcdev.nr_resets = PRCI_RST_NR;
pd->reset.rcdev.ops = &reset_simple_ops;
pd->reset.rcdev.of_node = pdev->dev.of_node;
pd->reset.active_low = true;
pd->reset.membase = pd->va + PRCI_DEVICESRESETREG_OFFSET;
spin_lock_init(&pd->reset.lock);
r = devm_reset_controller_register(&pdev->dev, &pd->reset.rcdev);
if (r) {
dev_err(dev, "could not register reset controller: %d\n", r);
return r;
}
r = __prci_register_clocks(dev, pd, desc);
if (r) {
dev_err(dev, "could not register clocks: %d\n", r);
return r;
}
dev_dbg(dev, "SiFive PRCI probed\n");
return 0;
}
static const struct of_device_id sifive_prci_of_match[] = {
{.compatible = "sifive,fu540-c000-prci", .data = &prci_clk_fu540},
{.compatible = "sifive,fu740-c000-prci", .data = &prci_clk_fu740},
{}
};
static struct platform_driver sifive_prci_driver = {
.driver = {
.name = "sifive-clk-prci",
.of_match_table = sifive_prci_of_match,
},
.probe = sifive_prci_probe,
};
static int __init sifive_prci_init(void)
{
return platform_driver_register(&sifive_prci_driver);
}
core_initcall(sifive_prci_init);