// SPDX-License-Identifier: GPL-2.0-only
/*
 * Logitech PS/2++ mouse driver
 *
 * Copyright (c) 1999-2003 Vojtech Pavlik <vojtech@suse.cz>
 * Copyright (c) 2003 Eric Wong <eric@yhbt.net>
 */

#include <linux/bitops.h>
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/libps2.h>
#include <linux/types.h>
#include "psmouse.h"
#include "logips2pp.h"

/* Logitech mouse types */
#define PS2PP_KIND_WHEEL	1
#define PS2PP_KIND_MX		2
#define PS2PP_KIND_TP3		3
#define PS2PP_KIND_TRACKMAN	4

/* Logitech mouse features */
#define PS2PP_WHEEL		BIT(0)
#define PS2PP_HWHEEL		BIT(1)
#define PS2PP_SIDE_BTN		BIT(2)
#define PS2PP_EXTRA_BTN		BIT(3)
#define PS2PP_TASK_BTN		BIT(4)
#define PS2PP_NAV_BTN		BIT(5)

struct ps2pp_info {
	u8 model;
	u8 kind;
	u16 features;
};

/*
 * Process a PS2++ or PS2T++ packet.
 */

static psmouse_ret_t ps2pp_process_byte(struct psmouse *psmouse)
{
	struct input_dev *dev = psmouse->dev;
	u8 *packet = psmouse->packet;

	if (psmouse->pktcnt < 3)
		return PSMOUSE_GOOD_DATA;

/*
 * Full packet accumulated, process it
 */

	if ((packet[0] & 0x48) == 0x48 && (packet[1] & 0x02) == 0x02) {

		/* Logitech extended packet */
		switch ((packet[1] >> 4) | (packet[0] & 0x30)) {

		case 0x0d: /* Mouse extra info */

			input_report_rel(dev,
				packet[2] & 0x80 ? REL_HWHEEL : REL_WHEEL,
				-sign_extend32(packet[2], 3));
			input_report_key(dev, BTN_SIDE,  packet[2] & BIT(4));
			input_report_key(dev, BTN_EXTRA, packet[2] & BIT(5));

			break;

		case 0x0e: /* buttons 4, 5, 6, 7, 8, 9, 10 info */

			input_report_key(dev, BTN_SIDE,    packet[2] & BIT(0));
			input_report_key(dev, BTN_EXTRA,   packet[2] & BIT(1));
			input_report_key(dev, BTN_TASK,    packet[2] & BIT(2));
			input_report_key(dev, BTN_BACK,    packet[2] & BIT(3));
			input_report_key(dev, BTN_FORWARD, packet[2] & BIT(4));

			break;

		case 0x0f: /* TouchPad extra info */

			input_report_rel(dev,
				packet[2] & 0x08 ? REL_HWHEEL : REL_WHEEL,
				-sign_extend32(packet[2] >> 4, 3));
			packet[0] = packet[2] | BIT(3);
			break;

		default:
			psmouse_dbg(psmouse,
				    "Received PS2++ packet #%x, but don't know how to handle.\n",
				    (packet[1] >> 4) | (packet[0] & 0x30));
			break;
		}

		psmouse_report_standard_buttons(dev, packet[0]);

	} else {
		/* Standard PS/2 motion data */
		psmouse_report_standard_packet(dev, packet);
	}

	input_sync(dev);

	return PSMOUSE_FULL_PACKET;

}

/*
 * ps2pp_cmd() sends a PS2++ command, sliced into two bit
 * pieces through the SETRES command. This is needed to send extended
 * commands to mice on notebooks that try to understand the PS/2 protocol
 * Ugly.
 */

static int ps2pp_cmd(struct psmouse *psmouse, u8 *param, u8 command)
{
	int error;

	error = ps2_sliced_command(&psmouse->ps2dev, command);
	if (error)
		return error;

	error = ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_POLL | 0x0300);
	if (error)
		return error;

	return 0;
}

/*
 * SmartScroll / CruiseControl for some newer Logitech mice Defaults to
 * enabled if we do nothing to it. Of course I put this in because I want it
 * disabled :P
 * 1 - enabled (if previously disabled, also default)
 * 0 - disabled
 */

static void ps2pp_set_smartscroll(struct psmouse *psmouse, bool smartscroll)
{
	struct ps2dev *ps2dev = &psmouse->ps2dev;
	u8 param[4];

	ps2pp_cmd(psmouse, param, 0x32);

	param[0] = 0;
	ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES);
	ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES);
	ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES);

	param[0] = smartscroll;
	ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES);
}

static ssize_t ps2pp_attr_show_smartscroll(struct psmouse *psmouse,
					   void *data, char *buf)
{
	return sprintf(buf, "%d\n", psmouse->smartscroll);
}

static ssize_t ps2pp_attr_set_smartscroll(struct psmouse *psmouse, void *data,
					  const char *buf, size_t count)
{
	unsigned int value;
	int err;

	err = kstrtouint(buf, 10, &value);
	if (err)
		return err;

	if (value > 1)
		return -EINVAL;

	ps2pp_set_smartscroll(psmouse, value);
	psmouse->smartscroll = value;
	return count;
}

PSMOUSE_DEFINE_ATTR(smartscroll, S_IWUSR | S_IRUGO, NULL,
		    ps2pp_attr_show_smartscroll, ps2pp_attr_set_smartscroll);

/*
 * Support 800 dpi resolution _only_ if the user wants it (there are good
 * reasons to not use it even if the mouse supports it, and of course there are
 * also good reasons to use it, let the user decide).
 */

static void ps2pp_set_resolution(struct psmouse *psmouse,
				 unsigned int resolution)
{
	if (resolution > 400) {
		struct ps2dev *ps2dev = &psmouse->ps2dev;
		u8 param = 3;

		ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11);
		ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11);
		ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11);
		ps2_command(ps2dev, &param, PSMOUSE_CMD_SETRES);
		psmouse->resolution = 800;
	} else
		psmouse_set_resolution(psmouse, resolution);
}

static void ps2pp_disconnect(struct psmouse *psmouse)
{
	device_remove_file(&psmouse->ps2dev.serio->dev,
			   &psmouse_attr_smartscroll.dattr);
}

static const struct ps2pp_info *get_model_info(unsigned char model)
{
	static const struct ps2pp_info ps2pp_list[] = {
		{  1,	0,			0 },	/* Simple 2-button mouse */
		{ 12,	0,			PS2PP_SIDE_BTN},
		{ 13,	0,			0 },
		{ 15,	PS2PP_KIND_MX,					/* MX1000 */
				PS2PP_WHEEL | PS2PP_SIDE_BTN | PS2PP_TASK_BTN |
				PS2PP_EXTRA_BTN | PS2PP_NAV_BTN | PS2PP_HWHEEL },
		{ 40,	0,			PS2PP_SIDE_BTN },
		{ 41,	0,			PS2PP_SIDE_BTN },
		{ 42,	0,			PS2PP_SIDE_BTN },
		{ 43,	0,			PS2PP_SIDE_BTN },
		{ 50,	0,			0 },
		{ 51,	0,			0 },
		{ 52,	PS2PP_KIND_WHEEL,	PS2PP_SIDE_BTN | PS2PP_WHEEL },
		{ 53,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
		{ 56,	PS2PP_KIND_WHEEL,	PS2PP_SIDE_BTN | PS2PP_WHEEL }, /* Cordless MouseMan Wheel */
		{ 61,	PS2PP_KIND_MX,					/* MX700 */
				PS2PP_WHEEL | PS2PP_SIDE_BTN | PS2PP_TASK_BTN |
				PS2PP_EXTRA_BTN | PS2PP_NAV_BTN },
		{ 66,	PS2PP_KIND_MX,					/* MX3100 receiver */
				PS2PP_WHEEL | PS2PP_SIDE_BTN | PS2PP_TASK_BTN |
				PS2PP_EXTRA_BTN | PS2PP_NAV_BTN | PS2PP_HWHEEL },
		{ 72,	PS2PP_KIND_TRACKMAN,	0 },			/* T-CH11: TrackMan Marble */
		{ 73,	PS2PP_KIND_TRACKMAN,	PS2PP_SIDE_BTN },	/* TrackMan FX */
		{ 75,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
		{ 76,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
		{ 79,	PS2PP_KIND_TRACKMAN,	PS2PP_WHEEL },		/* TrackMan with wheel */
		{ 80,	PS2PP_KIND_WHEEL,	PS2PP_SIDE_BTN | PS2PP_WHEEL },
		{ 81,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
		{ 83,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
		{ 85,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
		{ 86,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
		{ 87,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
		{ 88,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
		{ 96,	0,			0 },
		{ 97,	PS2PP_KIND_TP3,		PS2PP_WHEEL | PS2PP_HWHEEL },
		{ 99,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
		{ 100,	PS2PP_KIND_MX,					/* MX510 */
				PS2PP_WHEEL | PS2PP_SIDE_BTN | PS2PP_TASK_BTN |
				PS2PP_EXTRA_BTN | PS2PP_NAV_BTN },
		{ 111,  PS2PP_KIND_MX,	PS2PP_WHEEL | PS2PP_SIDE_BTN },	/* MX300 reports task button as side */
		{ 112,	PS2PP_KIND_MX,					/* MX500 */
				PS2PP_WHEEL | PS2PP_SIDE_BTN | PS2PP_TASK_BTN |
				PS2PP_EXTRA_BTN | PS2PP_NAV_BTN },
		{ 114,	PS2PP_KIND_MX,					/* MX310 */
				PS2PP_WHEEL | PS2PP_SIDE_BTN |
				PS2PP_TASK_BTN | PS2PP_EXTRA_BTN }
	};
	int i;

	for (i = 0; i < ARRAY_SIZE(ps2pp_list); i++)
		if (model == ps2pp_list[i].model)
			return &ps2pp_list[i];

	return NULL;
}

/*
 * Set up input device's properties based on the detected mouse model.
 */

static void ps2pp_set_model_properties(struct psmouse *psmouse,
				       const struct ps2pp_info *model_info,
				       bool using_ps2pp)
{
	struct input_dev *input_dev = psmouse->dev;

	if (model_info->features & PS2PP_SIDE_BTN)
		input_set_capability(input_dev, EV_KEY, BTN_SIDE);

	if (model_info->features & PS2PP_EXTRA_BTN)
		input_set_capability(input_dev, EV_KEY, BTN_EXTRA);

	if (model_info->features & PS2PP_TASK_BTN)
		input_set_capability(input_dev, EV_KEY, BTN_TASK);

	if (model_info->features & PS2PP_NAV_BTN) {
		input_set_capability(input_dev, EV_KEY, BTN_FORWARD);
		input_set_capability(input_dev, EV_KEY, BTN_BACK);
	}

	if (model_info->features & PS2PP_WHEEL)
		input_set_capability(input_dev, EV_REL, REL_WHEEL);

	if (model_info->features & PS2PP_HWHEEL)
		input_set_capability(input_dev, EV_REL, REL_HWHEEL);

	switch (model_info->kind) {

	case PS2PP_KIND_WHEEL:
		psmouse->name = "Wheel Mouse";
		break;

	case PS2PP_KIND_MX:
		psmouse->name = "MX Mouse";
		break;

	case PS2PP_KIND_TP3:
		psmouse->name = "TouchPad 3";
		break;

	case PS2PP_KIND_TRACKMAN:
		psmouse->name = "TrackMan";
		break;

	default:
		/*
		 * Set name to "Mouse" only when using PS2++,
		 * otherwise let other protocols define suitable
		 * name
		 */
		if (using_ps2pp)
			psmouse->name = "Mouse";
		break;
	}
}

static int ps2pp_setup_protocol(struct psmouse *psmouse,
				const struct ps2pp_info *model_info)
{
	int error;

	psmouse->protocol_handler = ps2pp_process_byte;
	psmouse->pktsize = 3;

	if (model_info->kind != PS2PP_KIND_TP3) {
		psmouse->set_resolution = ps2pp_set_resolution;
		psmouse->disconnect = ps2pp_disconnect;

		error = device_create_file(&psmouse->ps2dev.serio->dev,
					   &psmouse_attr_smartscroll.dattr);
		if (error) {
			psmouse_err(psmouse,
				    "failed to create smartscroll sysfs attribute, error: %d\n",
				    error);
			return error;
		}
	}

	return 0;
}

/*
 * Logitech magic init. Detect whether the mouse is a Logitech one
 * and its exact model and try turning on extended protocol for ones
 * that support it.
 */

int ps2pp_detect(struct psmouse *psmouse, bool set_properties)
{
	struct ps2dev *ps2dev = &psmouse->ps2dev;
	const struct ps2pp_info *model_info;
	u8 param[4];
	u8 model, buttons;
	bool use_ps2pp = false;
	int error;

	param[0] = 0;
	ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES);
	ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11);
	ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11);
	ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11);
	param[1] = 0;
	ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO);

	model = ((param[0] >> 4) & 0x07) | ((param[0] << 3) & 0x78);
	buttons = param[1];

	if (!model || !buttons)
		return -ENXIO;

	model_info = get_model_info(model);
	if (model_info) {

/*
 * Do Logitech PS2++ / PS2T++ magic init.
 */
		if (model_info->kind == PS2PP_KIND_TP3) { /* Touch Pad 3 */

			/* Unprotect RAM */
			param[0] = 0x11; param[1] = 0x04; param[2] = 0x68;
			ps2_command(ps2dev, param, 0x30d1);
			/* Enable features */
			param[0] = 0x11; param[1] = 0x05; param[2] = 0x0b;
			ps2_command(ps2dev, param, 0x30d1);
			/* Enable PS2++ */
			param[0] = 0x11; param[1] = 0x09; param[2] = 0xc3;
			ps2_command(ps2dev, param, 0x30d1);

			param[0] = 0;
			if (!ps2_command(ps2dev, param, 0x13d1) &&
			    param[0] == 0x06 && param[1] == 0x00 &&
			    param[2] == 0x14) {
				use_ps2pp = true;
			}

		} else {

			param[0] = param[1] = param[2] = 0;
			ps2pp_cmd(psmouse, param, 0x39); /* Magic knock */
			ps2pp_cmd(psmouse, param, 0xDB);

			if ((param[0] & 0x78) == 0x48 &&
			    (param[1] & 0xf3) == 0xc2 &&
			    (param[2] & 0x03) == ((param[1] >> 2) & 3)) {
				ps2pp_set_smartscroll(psmouse, false);
				use_ps2pp = true;
			}
		}

	} else {
		psmouse_warn(psmouse,
			     "Detected unknown Logitech mouse model %d\n",
			     model);
	}

	if (set_properties) {
		psmouse->vendor = "Logitech";
		psmouse->model = model;

		if (use_ps2pp) {
			error = ps2pp_setup_protocol(psmouse, model_info);
			if (error)
				return error;
		}

		if (buttons >= 3)
			input_set_capability(psmouse->dev, EV_KEY, BTN_MIDDLE);

		if (model_info)
			ps2pp_set_model_properties(psmouse, model_info, use_ps2pp);
	}

	return use_ps2pp ? 0 : -ENXIO;
}