| // SPDX-License-Identifier: GPL-2.0 |
| /****************************************************************************** |
| * |
| * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. |
| * |
| ******************************************************************************/ |
| #include <drv_types.h> |
| #include <rtw_debug.h> |
| #include <hal_data.h> |
| #include <linux/jiffies.h> |
| |
| |
| /* Define global variables */ |
| u8 fakeEfuseBank; |
| u32 fakeEfuseUsedBytes; |
| u8 fakeEfuseContent[EFUSE_MAX_HW_SIZE] = {0}; |
| u8 fakeEfuseInitMap[EFUSE_MAX_MAP_LEN] = {0}; |
| u8 fakeEfuseModifiedMap[EFUSE_MAX_MAP_LEN] = {0}; |
| |
| u32 BTEfuseUsedBytes; |
| u8 BTEfuseContent[EFUSE_MAX_BT_BANK][EFUSE_MAX_HW_SIZE]; |
| u8 BTEfuseInitMap[EFUSE_BT_MAX_MAP_LEN] = {0}; |
| u8 BTEfuseModifiedMap[EFUSE_BT_MAX_MAP_LEN] = {0}; |
| |
| u32 fakeBTEfuseUsedBytes; |
| u8 fakeBTEfuseContent[EFUSE_MAX_BT_BANK][EFUSE_MAX_HW_SIZE]; |
| u8 fakeBTEfuseInitMap[EFUSE_BT_MAX_MAP_LEN] = {0}; |
| u8 fakeBTEfuseModifiedMap[EFUSE_BT_MAX_MAP_LEN] = {0}; |
| |
| #define REG_EFUSE_CTRL 0x0030 |
| #define EFUSE_CTRL REG_EFUSE_CTRL /* E-Fuse Control. */ |
| |
| static bool |
| Efuse_Read1ByteFromFakeContent( |
| struct adapter *padapter, |
| u16 Offset, |
| u8 *Value) |
| { |
| if (Offset >= EFUSE_MAX_HW_SIZE) |
| return false; |
| if (fakeEfuseBank == 0) |
| *Value = fakeEfuseContent[Offset]; |
| else |
| *Value = fakeBTEfuseContent[fakeEfuseBank-1][Offset]; |
| return true; |
| } |
| |
| static bool |
| Efuse_Write1ByteToFakeContent( |
| struct adapter *padapter, |
| u16 Offset, |
| u8 Value) |
| { |
| if (Offset >= EFUSE_MAX_HW_SIZE) |
| return false; |
| if (fakeEfuseBank == 0) |
| fakeEfuseContent[Offset] = Value; |
| else |
| fakeBTEfuseContent[fakeEfuseBank-1][Offset] = Value; |
| return true; |
| } |
| |
| /*----------------------------------------------------------------------------- |
| * Function: Efuse_PowerSwitch |
| * |
| * Overview: When we want to enable write operation, we should change to |
| * pwr on state. When we stop write, we should switch to 500k mode |
| * and disable LDO 2.5V. |
| * |
| * Input: NONE |
| * |
| * Output: NONE |
| * |
| * Return: NONE |
| * |
| * Revised History: |
| * When Who Remark |
| * 11/17/2008 MHC Create Version 0. |
| * |
| *---------------------------------------------------------------------------*/ |
| void |
| Efuse_PowerSwitch( |
| struct adapter *padapter, |
| u8 bWrite, |
| u8 PwrState) |
| { |
| padapter->HalFunc.EfusePowerSwitch(padapter, bWrite, PwrState); |
| } |
| |
| /*----------------------------------------------------------------------------- |
| * Function: Efuse_GetCurrentSize |
| * |
| * Overview: Get current efuse size!!! |
| * |
| * Input: NONE |
| * |
| * Output: NONE |
| * |
| * Return: NONE |
| * |
| * Revised History: |
| * When Who Remark |
| * 11/16/2008 MHC Create Version 0. |
| * |
| *---------------------------------------------------------------------------*/ |
| u16 |
| Efuse_GetCurrentSize( |
| struct adapter *padapter, |
| u8 efuseType, |
| bool bPseudoTest) |
| { |
| return padapter->HalFunc.EfuseGetCurrentSize(padapter, efuseType, |
| bPseudoTest); |
| } |
| |
| /* 11/16/2008 MH Add description. Get current efuse area enabled word!!. */ |
| u8 |
| Efuse_CalculateWordCnts(u8 word_en) |
| { |
| u8 word_cnts = 0; |
| if (!(word_en & BIT(0))) |
| word_cnts++; /* 0 : write enable */ |
| if (!(word_en & BIT(1))) |
| word_cnts++; |
| if (!(word_en & BIT(2))) |
| word_cnts++; |
| if (!(word_en & BIT(3))) |
| word_cnts++; |
| return word_cnts; |
| } |
| |
| /* */ |
| /* Description: */ |
| /* 1. Execute E-Fuse read byte operation according as map offset and */ |
| /* save to E-Fuse table. */ |
| /* 2. Referred from SD1 Richard. */ |
| /* */ |
| /* Assumption: */ |
| /* 1. Boot from E-Fuse and successfully auto-load. */ |
| /* 2. PASSIVE_LEVEL (USB interface) */ |
| /* */ |
| /* Created by Roger, 2008.10.21. */ |
| /* */ |
| /* 2008/12/12 MH 1. Reorganize code flow and reserve bytes. and add description. */ |
| /* 2. Add efuse utilization collect. */ |
| /* 2008/12/22 MH Read Efuse must check if we write section 1 data again!!! Sec1 */ |
| /* write addr must be after sec5. */ |
| /* */ |
| |
| void |
| efuse_ReadEFuse( |
| struct adapter *Adapter, |
| u8 efuseType, |
| u16 _offset, |
| u16 _size_byte, |
| u8 *pbuf, |
| bool bPseudoTest |
| ); |
| void |
| efuse_ReadEFuse( |
| struct adapter *Adapter, |
| u8 efuseType, |
| u16 _offset, |
| u16 _size_byte, |
| u8 *pbuf, |
| bool bPseudoTest |
| ) |
| { |
| Adapter->HalFunc.ReadEFuse(Adapter, efuseType, _offset, _size_byte, pbuf, bPseudoTest); |
| } |
| |
| void |
| EFUSE_GetEfuseDefinition( |
| struct adapter *padapter, |
| u8 efuseType, |
| u8 type, |
| void *pOut, |
| bool bPseudoTest |
| ) |
| { |
| padapter->HalFunc.EFUSEGetEfuseDefinition(padapter, efuseType, type, pOut, bPseudoTest); |
| } |
| |
| /*----------------------------------------------------------------------------- |
| * Function: EFUSE_Read1Byte |
| * |
| * Overview: Copy from WMAC fot EFUSE read 1 byte. |
| * |
| * Input: NONE |
| * |
| * Output: NONE |
| * |
| * Return: NONE |
| * |
| * Revised History: |
| * When Who Remark |
| * 09/23/2008 MHC Copy from WMAC. |
| * |
| *---------------------------------------------------------------------------*/ |
| u8 |
| EFUSE_Read1Byte( |
| struct adapter *Adapter, |
| u16 Address) |
| { |
| u8 Bytetemp = {0x00}; |
| u8 temp = {0x00}; |
| u32 k = 0; |
| u16 contentLen = 0; |
| |
| EFUSE_GetEfuseDefinition(Adapter, EFUSE_WIFI, TYPE_EFUSE_REAL_CONTENT_LEN, (void *)&contentLen, false); |
| |
| if (Address < contentLen) {/* E-fuse 512Byte */ |
| /* Write E-fuse Register address bit0~7 */ |
| temp = Address & 0xFF; |
| rtw_write8(Adapter, EFUSE_CTRL+1, temp); |
| Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+2); |
| /* Write E-fuse Register address bit8~9 */ |
| temp = ((Address >> 8) & 0x03) | (Bytetemp & 0xFC); |
| rtw_write8(Adapter, EFUSE_CTRL+2, temp); |
| |
| /* Write 0x30[31]= 0 */ |
| Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3); |
| temp = Bytetemp & 0x7F; |
| rtw_write8(Adapter, EFUSE_CTRL+3, temp); |
| |
| /* Wait Write-ready (0x30[31]= 1) */ |
| Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3); |
| while (!(Bytetemp & 0x80)) { |
| Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3); |
| k++; |
| if (k == 1000) |
| break; |
| } |
| return rtw_read8(Adapter, EFUSE_CTRL); |
| } else |
| return 0xFF; |
| |
| } /* EFUSE_Read1Byte */ |
| |
| /* 11/16/2008 MH Read one byte from real Efuse. */ |
| u8 |
| efuse_OneByteRead( |
| struct adapter *padapter, |
| u16 addr, |
| u8 *data, |
| bool bPseudoTest) |
| { |
| u32 tmpidx = 0; |
| u8 bResult; |
| u8 readbyte; |
| |
| if (bPseudoTest) |
| return Efuse_Read1ByteFromFakeContent(padapter, addr, data); |
| |
| /* <20130121, Kordan> For SMIC EFUSE specificatoin. */ |
| /* 0x34[11]: SW force PGMEN input of efuse to high. (for the bank selected by 0x34[9:8]) */ |
| /* PHY_SetMacReg(padapter, 0x34, BIT11, 0); */ |
| rtw_write16(padapter, 0x34, rtw_read16(padapter, 0x34) & (~BIT11)); |
| |
| /* -----------------e-fuse reg ctrl --------------------------------- */ |
| /* address */ |
| rtw_write8(padapter, EFUSE_CTRL+1, (u8)(addr&0xff)); |
| rtw_write8(padapter, EFUSE_CTRL+2, ((u8)((addr>>8) & 0x03)) | |
| (rtw_read8(padapter, EFUSE_CTRL+2)&0xFC)); |
| |
| /* rtw_write8(padapter, EFUSE_CTRL+3, 0x72); read cmd */ |
| /* Write bit 32 0 */ |
| readbyte = rtw_read8(padapter, EFUSE_CTRL+3); |
| rtw_write8(padapter, EFUSE_CTRL+3, (readbyte & 0x7f)); |
| |
| while (!(0x80 & rtw_read8(padapter, EFUSE_CTRL+3)) && (tmpidx < 1000)) { |
| mdelay(1); |
| tmpidx++; |
| } |
| if (tmpidx < 100) { |
| *data = rtw_read8(padapter, EFUSE_CTRL); |
| bResult = true; |
| } else { |
| *data = 0xff; |
| bResult = false; |
| } |
| |
| return bResult; |
| } |
| |
| /* 11/16/2008 MH Write one byte to reald Efuse. */ |
| u8 efuse_OneByteWrite(struct adapter *padapter, u16 addr, u8 data, bool bPseudoTest) |
| { |
| u8 tmpidx = 0; |
| u8 bResult = false; |
| u32 efuseValue = 0; |
| |
| if (bPseudoTest) |
| return Efuse_Write1ByteToFakeContent(padapter, addr, data); |
| |
| |
| /* -----------------e-fuse reg ctrl --------------------------------- */ |
| /* address */ |
| |
| |
| efuseValue = rtw_read32(padapter, EFUSE_CTRL); |
| efuseValue |= (BIT21|BIT31); |
| efuseValue &= ~(0x3FFFF); |
| efuseValue |= ((addr<<8 | data) & 0x3FFFF); |
| |
| |
| /* <20130227, Kordan> 8192E MP chip A-cut had better not set 0x34[11] until B-Cut. */ |
| |
| /* <20130121, Kordan> For SMIC EFUSE specificatoin. */ |
| /* 0x34[11]: SW force PGMEN input of efuse to high. (for the bank selected by 0x34[9:8]) */ |
| /* PHY_SetMacReg(padapter, 0x34, BIT11, 1); */ |
| rtw_write16(padapter, 0x34, rtw_read16(padapter, 0x34) | (BIT11)); |
| rtw_write32(padapter, EFUSE_CTRL, 0x90600000|((addr<<8 | data))); |
| |
| while ((0x80 & rtw_read8(padapter, EFUSE_CTRL+3)) && (tmpidx < 100)) { |
| mdelay(1); |
| tmpidx++; |
| } |
| |
| if (tmpidx < 100) |
| bResult = true; |
| else |
| bResult = false; |
| |
| /* disable Efuse program enable */ |
| PHY_SetMacReg(padapter, EFUSE_TEST, BIT(11), 0); |
| |
| return bResult; |
| } |
| |
| int |
| Efuse_PgPacketRead(struct adapter *padapter, |
| u8 offset, |
| u8 *data, |
| bool bPseudoTest) |
| { |
| return padapter->HalFunc.Efuse_PgPacketRead(padapter, offset, data, |
| bPseudoTest); |
| } |
| |
| int |
| Efuse_PgPacketWrite(struct adapter *padapter, |
| u8 offset, |
| u8 word_en, |
| u8 *data, |
| bool bPseudoTest) |
| { |
| return padapter->HalFunc.Efuse_PgPacketWrite(padapter, offset, word_en, |
| data, bPseudoTest); |
| } |
| |
| /*----------------------------------------------------------------------------- |
| * Function: efuse_WordEnableDataRead |
| * |
| * Overview: Read allowed word in current efuse section data. |
| * |
| * Input: NONE |
| * |
| * Output: NONE |
| * |
| * Return: NONE |
| * |
| * Revised History: |
| * When Who Remark |
| * 11/16/2008 MHC Create Version 0. |
| * 11/21/2008 MHC Fix Write bug when we only enable late word. |
| * |
| *---------------------------------------------------------------------------*/ |
| void |
| efuse_WordEnableDataRead(u8 word_en, |
| u8 *sourdata, |
| u8 *targetdata) |
| { |
| if (!(word_en&BIT(0))) { |
| targetdata[0] = sourdata[0]; |
| targetdata[1] = sourdata[1]; |
| } |
| if (!(word_en&BIT(1))) { |
| targetdata[2] = sourdata[2]; |
| targetdata[3] = sourdata[3]; |
| } |
| if (!(word_en&BIT(2))) { |
| targetdata[4] = sourdata[4]; |
| targetdata[5] = sourdata[5]; |
| } |
| if (!(word_en&BIT(3))) { |
| targetdata[6] = sourdata[6]; |
| targetdata[7] = sourdata[7]; |
| } |
| } |
| |
| |
| u8 |
| Efuse_WordEnableDataWrite(struct adapter *padapter, |
| u16 efuse_addr, |
| u8 word_en, |
| u8 *data, |
| bool bPseudoTest) |
| { |
| return padapter->HalFunc.Efuse_WordEnableDataWrite(padapter, efuse_addr, |
| word_en, data, |
| bPseudoTest); |
| } |
| |
| /*----------------------------------------------------------------------------- |
| * Function: Efuse_ReadAllMap |
| * |
| * Overview: Read All Efuse content |
| * |
| * Input: NONE |
| * |
| * Output: NONE |
| * |
| * Return: NONE |
| * |
| * Revised History: |
| * When Who Remark |
| * 11/11/2008 MHC Create Version 0. |
| * |
| *---------------------------------------------------------------------------*/ |
| void |
| Efuse_ReadAllMap( |
| struct adapter *padapter, |
| u8 efuseType, |
| u8 *Efuse, |
| bool bPseudoTest); |
| void Efuse_ReadAllMap(struct adapter *padapter, u8 efuseType, u8 *Efuse, bool bPseudoTest) |
| { |
| u16 mapLen = 0; |
| |
| Efuse_PowerSwitch(padapter, false, true); |
| |
| EFUSE_GetEfuseDefinition(padapter, efuseType, TYPE_EFUSE_MAP_LEN, (void *)&mapLen, bPseudoTest); |
| |
| efuse_ReadEFuse(padapter, efuseType, 0, mapLen, Efuse, bPseudoTest); |
| |
| Efuse_PowerSwitch(padapter, false, false); |
| } |
| |
| /*----------------------------------------------------------------------------- |
| * Function: efuse_ShadowRead1Byte |
| * efuse_ShadowRead2Byte |
| * efuse_ShadowRead4Byte |
| * |
| * Overview: Read from efuse init map by one/two/four bytes !!!!! |
| * |
| * Input: NONE |
| * |
| * Output: NONE |
| * |
| * Return: NONE |
| * |
| * Revised History: |
| * When Who Remark |
| * 11/12/2008 MHC Create Version 0. |
| * |
| *---------------------------------------------------------------------------*/ |
| static void efuse_ShadowRead1Byte(struct adapter *padapter, u16 Offset, u8 *Value) |
| { |
| struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter); |
| |
| *Value = pEEPROM->efuse_eeprom_data[Offset]; |
| |
| } /* EFUSE_ShadowRead1Byte */ |
| |
| /* Read Two Bytes */ |
| static void efuse_ShadowRead2Byte(struct adapter *padapter, u16 Offset, u16 *Value) |
| { |
| struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter); |
| |
| *Value = pEEPROM->efuse_eeprom_data[Offset]; |
| *Value |= pEEPROM->efuse_eeprom_data[Offset+1]<<8; |
| |
| } /* EFUSE_ShadowRead2Byte */ |
| |
| /* Read Four Bytes */ |
| static void efuse_ShadowRead4Byte(struct adapter *padapter, u16 Offset, u32 *Value) |
| { |
| struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter); |
| |
| *Value = pEEPROM->efuse_eeprom_data[Offset]; |
| *Value |= pEEPROM->efuse_eeprom_data[Offset+1]<<8; |
| *Value |= pEEPROM->efuse_eeprom_data[Offset+2]<<16; |
| *Value |= pEEPROM->efuse_eeprom_data[Offset+3]<<24; |
| |
| } /* efuse_ShadowRead4Byte */ |
| |
| /*----------------------------------------------------------------------------- |
| * Function: EFUSE_ShadowMapUpdate |
| * |
| * Overview: Transfer current EFUSE content to shadow init and modify map. |
| * |
| * Input: NONE |
| * |
| * Output: NONE |
| * |
| * Return: NONE |
| * |
| * Revised History: |
| * When Who Remark |
| * 11/13/2008 MHC Create Version 0. |
| * |
| *---------------------------------------------------------------------------*/ |
| void EFUSE_ShadowMapUpdate(struct adapter *padapter, u8 efuseType, bool bPseudoTest) |
| { |
| struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter); |
| u16 mapLen = 0; |
| |
| EFUSE_GetEfuseDefinition(padapter, efuseType, TYPE_EFUSE_MAP_LEN, (void *)&mapLen, bPseudoTest); |
| |
| if (pEEPROM->bautoload_fail_flag) |
| memset(pEEPROM->efuse_eeprom_data, 0xFF, mapLen); |
| else |
| Efuse_ReadAllMap(padapter, efuseType, pEEPROM->efuse_eeprom_data, bPseudoTest); |
| |
| /* PlatformMoveMemory((void *)&pHalData->EfuseMap[EFUSE_MODIFY_MAP][0], */ |
| /* void *)&pHalData->EfuseMap[EFUSE_INIT_MAP][0], mapLen); */ |
| } /* EFUSE_ShadowMapUpdate */ |
| |
| |
| /*----------------------------------------------------------------------------- |
| * Function: EFUSE_ShadowRead |
| * |
| * Overview: Read from efuse init map !!!!! |
| * |
| * Input: NONE |
| * |
| * Output: NONE |
| * |
| * Return: NONE |
| * |
| * Revised History: |
| * When Who Remark |
| * 11/12/2008 MHC Create Version 0. |
| * |
| *---------------------------------------------------------------------------*/ |
| void EFUSE_ShadowRead(struct adapter *padapter, u8 Type, u16 Offset, u32 *Value) |
| { |
| if (Type == 1) |
| efuse_ShadowRead1Byte(padapter, Offset, (u8 *)Value); |
| else if (Type == 2) |
| efuse_ShadowRead2Byte(padapter, Offset, (u16 *)Value); |
| else if (Type == 4) |
| efuse_ShadowRead4Byte(padapter, Offset, (u32 *)Value); |
| |
| } /* EFUSE_ShadowRead*/ |
