/* SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) */
#ifndef __BPF_HELPERS__
#define __BPF_HELPERS__

/*
 * Note that bpf programs need to include either
 * vmlinux.h (auto-generated from BTF) or linux/types.h
 * in advance since bpf_helper_defs.h uses such types
 * as __u64.
 */
#include "bpf_helper_defs.h"

#define __uint(name, val) int (*name)[val]
#define __type(name, val) typeof(val) *name
#define __array(name, val) typeof(val) *name[]

/*
 * Helper macro to place programs, maps, license in
 * different sections in elf_bpf file. Section names
 * are interpreted by libbpf depending on the context (BPF programs, BPF maps,
 * extern variables, etc).
 * To allow use of SEC() with externs (e.g., for extern .maps declarations),
 * make sure __attribute__((unused)) doesn't trigger compilation warning.
 */
#define SEC(name) \
	_Pragma("GCC diagnostic push")					    \
	_Pragma("GCC diagnostic ignored \"-Wignored-attributes\"")	    \
	__attribute__((section(name), used))				    \
	_Pragma("GCC diagnostic pop")					    \

/* Avoid 'linux/stddef.h' definition of '__always_inline'. */
#undef __always_inline
#define __always_inline inline __attribute__((always_inline))

#ifndef __noinline
#define __noinline __attribute__((noinline))
#endif
#ifndef __weak
#define __weak __attribute__((weak))
#endif

/*
 * Use __hidden attribute to mark a non-static BPF subprogram effectively
 * static for BPF verifier's verification algorithm purposes, allowing more
 * extensive and permissive BPF verification process, taking into account
 * subprogram's caller context.
 */
#define __hidden __attribute__((visibility("hidden")))

/* When utilizing vmlinux.h with BPF CO-RE, user BPF programs can't include
 * any system-level headers (such as stddef.h, linux/version.h, etc), and
 * commonly-used macros like NULL and KERNEL_VERSION aren't available through
 * vmlinux.h. This just adds unnecessary hurdles and forces users to re-define
 * them on their own. So as a convenience, provide such definitions here.
 */
#ifndef NULL
#define NULL ((void *)0)
#endif

#ifndef KERNEL_VERSION
#define KERNEL_VERSION(a, b, c) (((a) << 16) + ((b) << 8) + ((c) > 255 ? 255 : (c)))
#endif

/*
 * Helper macros to manipulate data structures
 */
#ifndef offsetof
#define offsetof(TYPE, MEMBER)	((unsigned long)&((TYPE *)0)->MEMBER)
#endif
#ifndef container_of
#define container_of(ptr, type, member)				\
	({							\
		void *__mptr = (void *)(ptr);			\
		((type *)(__mptr - offsetof(type, member)));	\
	})
#endif

/*
 * Helper macro to throw a compilation error if __bpf_unreachable() gets
 * built into the resulting code. This works given BPF back end does not
 * implement __builtin_trap(). This is useful to assert that certain paths
 * of the program code are never used and hence eliminated by the compiler.
 *
 * For example, consider a switch statement that covers known cases used by
 * the program. __bpf_unreachable() can then reside in the default case. If
 * the program gets extended such that a case is not covered in the switch
 * statement, then it will throw a build error due to the default case not
 * being compiled out.
 */
#ifndef __bpf_unreachable
# define __bpf_unreachable()	__builtin_trap()
#endif

/*
 * Helper function to perform a tail call with a constant/immediate map slot.
 */
#if __clang_major__ >= 8 && defined(__bpf__)
static __always_inline void
bpf_tail_call_static(void *ctx, const void *map, const __u32 slot)
{
	if (!__builtin_constant_p(slot))
		__bpf_unreachable();

	/*
	 * Provide a hard guarantee that LLVM won't optimize setting r2 (map
	 * pointer) and r3 (constant map index) from _different paths_ ending
	 * up at the _same_ call insn as otherwise we won't be able to use the
	 * jmpq/nopl retpoline-free patching by the x86-64 JIT in the kernel
	 * given they mismatch. See also d2e4c1e6c294 ("bpf: Constant map key
	 * tracking for prog array pokes") for details on verifier tracking.
	 *
	 * Note on clobber list: we need to stay in-line with BPF calling
	 * convention, so even if we don't end up using r0, r4, r5, we need
	 * to mark them as clobber so that LLVM doesn't end up using them
	 * before / after the call.
	 */
	asm volatile("r1 = %[ctx]\n\t"
		     "r2 = %[map]\n\t"
		     "r3 = %[slot]\n\t"
		     "call 12"
		     :: [ctx]"r"(ctx), [map]"r"(map), [slot]"i"(slot)
		     : "r0", "r1", "r2", "r3", "r4", "r5");
}
#endif

/*
 * Helper structure used by eBPF C program
 * to describe BPF map attributes to libbpf loader
 */
struct bpf_map_def {
	unsigned int type;
	unsigned int key_size;
	unsigned int value_size;
	unsigned int max_entries;
	unsigned int map_flags;
};

enum libbpf_pin_type {
	LIBBPF_PIN_NONE,
	/* PIN_BY_NAME: pin maps by name (in /sys/fs/bpf by default) */
	LIBBPF_PIN_BY_NAME,
};

enum libbpf_tristate {
	TRI_NO = 0,
	TRI_YES = 1,
	TRI_MODULE = 2,
};

#define __kconfig __attribute__((section(".kconfig")))
#define __ksym __attribute__((section(".ksyms")))

#ifndef ___bpf_concat
#define ___bpf_concat(a, b) a ## b
#endif
#ifndef ___bpf_apply
#define ___bpf_apply(fn, n) ___bpf_concat(fn, n)
#endif
#ifndef ___bpf_nth
#define ___bpf_nth(_, _1, _2, _3, _4, _5, _6, _7, _8, _9, _a, _b, _c, N, ...) N
#endif
#ifndef ___bpf_narg
#define ___bpf_narg(...) \
	___bpf_nth(_, ##__VA_ARGS__, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0)
#endif

#define ___bpf_fill0(arr, p, x) do {} while (0)
#define ___bpf_fill1(arr, p, x) arr[p] = x
#define ___bpf_fill2(arr, p, x, args...) arr[p] = x; ___bpf_fill1(arr, p + 1, args)
#define ___bpf_fill3(arr, p, x, args...) arr[p] = x; ___bpf_fill2(arr, p + 1, args)
#define ___bpf_fill4(arr, p, x, args...) arr[p] = x; ___bpf_fill3(arr, p + 1, args)
#define ___bpf_fill5(arr, p, x, args...) arr[p] = x; ___bpf_fill4(arr, p + 1, args)
#define ___bpf_fill6(arr, p, x, args...) arr[p] = x; ___bpf_fill5(arr, p + 1, args)
#define ___bpf_fill7(arr, p, x, args...) arr[p] = x; ___bpf_fill6(arr, p + 1, args)
#define ___bpf_fill8(arr, p, x, args...) arr[p] = x; ___bpf_fill7(arr, p + 1, args)
#define ___bpf_fill9(arr, p, x, args...) arr[p] = x; ___bpf_fill8(arr, p + 1, args)
#define ___bpf_fill10(arr, p, x, args...) arr[p] = x; ___bpf_fill9(arr, p + 1, args)
#define ___bpf_fill11(arr, p, x, args...) arr[p] = x; ___bpf_fill10(arr, p + 1, args)
#define ___bpf_fill12(arr, p, x, args...) arr[p] = x; ___bpf_fill11(arr, p + 1, args)
#define ___bpf_fill(arr, args...) \
	___bpf_apply(___bpf_fill, ___bpf_narg(args))(arr, 0, args)

/*
 * BPF_SEQ_PRINTF to wrap bpf_seq_printf to-be-printed values
 * in a structure.
 */
#define BPF_SEQ_PRINTF(seq, fmt, args...)			\
({								\
	static const char ___fmt[] = fmt;			\
	unsigned long long ___param[___bpf_narg(args)];		\
								\
	_Pragma("GCC diagnostic push")				\
	_Pragma("GCC diagnostic ignored \"-Wint-conversion\"")	\
	___bpf_fill(___param, args);				\
	_Pragma("GCC diagnostic pop")				\
								\
	bpf_seq_printf(seq, ___fmt, sizeof(___fmt),		\
		       ___param, sizeof(___param));		\
})

/*
 * BPF_SNPRINTF wraps the bpf_snprintf helper with variadic arguments instead of
 * an array of u64.
 */
#define BPF_SNPRINTF(out, out_size, fmt, args...)		\
({								\
	static const char ___fmt[] = fmt;			\
	unsigned long long ___param[___bpf_narg(args)];		\
								\
	_Pragma("GCC diagnostic push")				\
	_Pragma("GCC diagnostic ignored \"-Wint-conversion\"")	\
	___bpf_fill(___param, args);				\
	_Pragma("GCC diagnostic pop")				\
								\
	bpf_snprintf(out, out_size, ___fmt,			\
		     ___param, sizeof(___param));		\
})

#ifdef BPF_NO_GLOBAL_DATA
#define BPF_PRINTK_FMT_MOD
#else
#define BPF_PRINTK_FMT_MOD static const
#endif

#define __bpf_printk(fmt, ...)				\
({							\
	BPF_PRINTK_FMT_MOD char ____fmt[] = fmt;	\
	bpf_trace_printk(____fmt, sizeof(____fmt),	\
			 ##__VA_ARGS__);		\
})

/*
 * __bpf_vprintk wraps the bpf_trace_vprintk helper with variadic arguments
 * instead of an array of u64.
 */
#define __bpf_vprintk(fmt, args...)				\
({								\
	static const char ___fmt[] = fmt;			\
	unsigned long long ___param[___bpf_narg(args)];		\
								\
	_Pragma("GCC diagnostic push")				\
	_Pragma("GCC diagnostic ignored \"-Wint-conversion\"")	\
	___bpf_fill(___param, args);				\
	_Pragma("GCC diagnostic pop")				\
								\
	bpf_trace_vprintk(___fmt, sizeof(___fmt),		\
			  ___param, sizeof(___param));		\
})

/* Use __bpf_printk when bpf_printk call has 3 or fewer fmt args
 * Otherwise use __bpf_vprintk
 */
#define ___bpf_pick_printk(...) \
	___bpf_nth(_, ##__VA_ARGS__, __bpf_vprintk, __bpf_vprintk, __bpf_vprintk,	\
		   __bpf_vprintk, __bpf_vprintk, __bpf_vprintk, __bpf_vprintk,		\
		   __bpf_vprintk, __bpf_vprintk, __bpf_printk /*3*/, __bpf_printk /*2*/,\
		   __bpf_printk /*1*/, __bpf_printk /*0*/)

/* Helper macro to print out debug messages */
#define bpf_printk(fmt, args...) ___bpf_pick_printk(args)(fmt, ##args)

#endif