| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/media/i2c/aptina,mt9v111.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Aptina MT9V111 CMOS sensor |
| |
| maintainers: |
| - Jacopo Mondi <jacopo@jmondi.org> |
| |
| description: | |
| The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core |
| based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP). |
| |
| The sensor has an active pixel array of 640x480 pixels and can output a number |
| of image resolutions and formats controllable through a simple two-wires |
| interface. |
| |
| properties: |
| compatible: |
| const: aptina,mt9v111 |
| |
| reg: |
| maxItems: 1 |
| |
| clocks: |
| maxItems: 1 |
| |
| enable-gpios: |
| description: Enable signal, pin name "OE#". Active low. |
| maxItems: 1 |
| |
| standby-gpios: |
| description: | |
| Low power state control signal, pin name "STANDBY". Active high. |
| maxItems: 1 |
| |
| reset-gpios: |
| description: Chip reset signal, pin name "RESET#". Active low. |
| maxItems: 1 |
| |
| port: |
| $ref: /schemas/graph.yaml#/properties/port |
| description: | |
| Output video port. |
| |
| required: |
| - compatible |
| - reg |
| - clocks |
| - port |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| i2c0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| camera@48 { |
| compatible = "aptina,mt9v111"; |
| reg = <0x48>; |
| clocks = <&camera_clk>; |
| |
| port { |
| mt9v111_out: endpoint { |
| remote-endpoint = <&ceu_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| ... |
