| # SPDX-License-Identifier: GPL-2.0-only |
| # Copyright (C) 2020 Renesas Electronics Corp. |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/media/renesas,vin.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Renesas R-Car Video Input (VIN) |
| |
| maintainers: |
| - Niklas Söderlund <niklas.soderlund@ragnatech.se> |
| |
| description: |
| The R-Car Video Input (VIN) device provides video input capabilities for the |
| Renesas R-Car family of devices. |
| |
| Each VIN instance has a single parallel input that supports RGB and YUV video, |
| with both external synchronization and BT.656 synchronization for the latter. |
| Depending on the instance the VIN input is connected to external SoC pins, or |
| on Gen3 and RZ/G2 platforms to a CSI-2 receiver. |
| |
| properties: |
| compatible: |
| oneOf: |
| - items: |
| - enum: |
| - renesas,vin-r8a7742 # RZ/G1H |
| - renesas,vin-r8a7743 # RZ/G1M |
| - renesas,vin-r8a7744 # RZ/G1N |
| - renesas,vin-r8a7745 # RZ/G1E |
| - renesas,vin-r8a77470 # RZ/G1C |
| - renesas,vin-r8a7790 # R-Car H2 |
| - renesas,vin-r8a7791 # R-Car M2-W |
| - renesas,vin-r8a7792 # R-Car V2H |
| - renesas,vin-r8a7793 # R-Car M2-N |
| - renesas,vin-r8a7794 # R-Car E2 |
| - const: renesas,rcar-gen2-vin # Generic R-Car Gen2 or RZ/G1 |
| |
| - items: |
| - enum: |
| - renesas,vin-r8a774a1 # RZ/G2M |
| - renesas,vin-r8a774b1 # RZ/G2N |
| - renesas,vin-r8a774c0 # RZ/G2E |
| - renesas,vin-r8a774e1 # RZ/G2H |
| - renesas,vin-r8a7778 # R-Car M1 |
| - renesas,vin-r8a7779 # R-Car H1 |
| - renesas,vin-r8a7795 # R-Car H3 |
| - renesas,vin-r8a7796 # R-Car M3-W |
| - renesas,vin-r8a77961 # R-Car M3-W+ |
| - renesas,vin-r8a77965 # R-Car M3-N |
| - renesas,vin-r8a77970 # R-Car V3M |
| - renesas,vin-r8a77980 # R-Car V3H |
| - renesas,vin-r8a77990 # R-Car E3 |
| - renesas,vin-r8a77995 # R-Car D3 |
| - renesas,vin-r8a779a0 # R-Car V3U |
| |
| reg: |
| maxItems: 1 |
| |
| interrupts: |
| maxItems: 1 |
| |
| clocks: |
| maxItems: 1 |
| |
| power-domains: |
| maxItems: 1 |
| |
| resets: |
| maxItems: 1 |
| |
| #The per-board settings for Gen2 and RZ/G1 platforms: |
| port: |
| $ref: /schemas/graph.yaml#/$defs/port-base |
| unevaluatedProperties: false |
| description: |
| A node containing a parallel input |
| |
| properties: |
| endpoint: |
| $ref: video-interfaces.yaml# |
| unevaluatedProperties: false |
| |
| properties: |
| hsync-active: |
| description: |
| If both HSYNC and VSYNC polarities are not specified, embedded |
| synchronization is selected. |
| default: 1 |
| |
| vsync-active: |
| description: |
| If both HSYNC and VSYNC polarities are not specified, embedded |
| synchronization is selected. |
| default: 1 |
| |
| field-active-even: true |
| |
| bus-width: true |
| |
| data-shift: true |
| |
| data-enable-active: |
| description: Polarity of CLKENB signal |
| default: 1 |
| |
| pclk-sample: true |
| |
| data-active: true |
| |
| #The per-board settings for Gen3 and RZ/G2 platforms: |
| renesas,id: |
| description: VIN channel number |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| minimum: 0 |
| maximum: 31 |
| |
| ports: |
| $ref: /schemas/graph.yaml#/properties/ports |
| |
| properties: |
| port@0: |
| $ref: /schemas/graph.yaml#/$defs/port-base |
| unevaluatedProperties: false |
| description: |
| Input port node, single endpoint describing a parallel input source. |
| |
| properties: |
| endpoint: |
| $ref: video-interfaces.yaml# |
| unevaluatedProperties: false |
| |
| properties: |
| hsync-active: |
| description: |
| If both HSYNC and VSYNC polarities are not specified, embedded |
| synchronization is selected. |
| default: 1 |
| |
| vsync-active: |
| description: |
| If both HSYNC and VSYNC polarities are not specified, embedded |
| synchronization is selected. |
| default: 1 |
| |
| field-active-even: true |
| |
| bus-width: true |
| |
| data-shift: true |
| |
| data-enable-active: |
| description: Polarity of CLKENB signal |
| default: 1 |
| |
| pclk-sample: true |
| |
| data-active: true |
| |
| port@1: |
| $ref: /schemas/graph.yaml#/properties/port |
| description: |
| Input port node, multiple endpoints describing all the R-Car CSI-2 |
| modules connected the VIN. |
| |
| properties: |
| endpoint@0: |
| $ref: /schemas/graph.yaml#/properties/endpoint |
| description: Endpoint connected to CSI20. |
| |
| endpoint@1: |
| $ref: /schemas/graph.yaml#/properties/endpoint |
| description: Endpoint connected to CSI21. |
| |
| endpoint@2: |
| $ref: /schemas/graph.yaml#/properties/endpoint |
| description: Endpoint connected to CSI40. |
| |
| endpoint@3: |
| $ref: /schemas/graph.yaml#/properties/endpoint |
| description: Endpoint connected to CSI41. |
| |
| anyOf: |
| - required: |
| - endpoint@0 |
| - required: |
| - endpoint@1 |
| - required: |
| - endpoint@2 |
| - required: |
| - endpoint@3 |
| |
| port@2: |
| $ref: /schemas/graph.yaml#/properties/port |
| description: |
| Input port node, multiple endpoints describing all the R-Car ISP |
| modules connected the VIN. |
| |
| properties: |
| endpoint@0: |
| $ref: /schemas/graph.yaml#/properties/endpoint |
| description: Endpoint connected to ISP0. |
| |
| endpoint@1: |
| $ref: /schemas/graph.yaml#/properties/endpoint |
| description: Endpoint connected to ISP1. |
| |
| endpoint@2: |
| $ref: /schemas/graph.yaml#/properties/endpoint |
| description: Endpoint connected to ISP2. |
| |
| endpoint@3: |
| $ref: /schemas/graph.yaml#/properties/endpoint |
| description: Endpoint connected to ISP3. |
| |
| required: |
| - compatible |
| - reg |
| - interrupts |
| - clocks |
| - power-domains |
| |
| allOf: |
| - if: |
| not: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - renesas,vin-r8a7778 |
| - renesas,vin-r8a7779 |
| then: |
| required: |
| - resets |
| |
| - if: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - renesas,vin-r8a7778 |
| - renesas,vin-r8a7779 |
| - renesas,rcar-gen2-vin |
| then: |
| required: |
| - port |
| else: |
| required: |
| - renesas,id |
| - ports |
| |
| additionalProperties: false |
| |
| examples: |
| # Device node example for Gen2 platform |
| - | |
| #include <dt-bindings/clock/r8a7790-cpg-mssr.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/power/r8a7790-sysc.h> |
| |
| vin1: vin@e6ef1000 { |
| compatible = "renesas,vin-r8a7790", |
| "renesas,rcar-gen2-vin"; |
| reg = <0xe6ef1000 0x1000>; |
| interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 810>; |
| power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; |
| resets = <&cpg 810>; |
| |
| port { |
| vin1ep0: endpoint { |
| remote-endpoint = <&adv7180>; |
| bus-width = <8>; |
| }; |
| }; |
| }; |
| |
| # Device node example for Gen3 platform with only CSI-2 |
| - | |
| #include <dt-bindings/clock/r8a7795-cpg-mssr.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/power/r8a7795-sysc.h> |
| |
| vin0: video@e6ef0000 { |
| compatible = "renesas,vin-r8a7795"; |
| reg = <0xe6ef0000 0x1000>; |
| interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 811>; |
| power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; |
| resets = <&cpg 811>; |
| renesas,id = <0>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| reg = <1>; |
| |
| vin0csi20: endpoint@0 { |
| reg = <0>; |
| remote-endpoint= <&csi20vin0>; |
| }; |
| vin0csi40: endpoint@2 { |
| reg = <2>; |
| remote-endpoint= <&csi40vin0>; |
| }; |
| }; |
| }; |
| }; |
| |
| # Device node example for Gen3 platform with CSI-2 and parallel |
| - | |
| #include <dt-bindings/clock/r8a77970-cpg-mssr.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/power/r8a77970-sysc.h> |
| |
| vin2: video@e6ef2000 { |
| compatible = "renesas,vin-r8a77970"; |
| reg = <0xe6ef2000 0x1000>; |
| interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 809>; |
| power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; |
| resets = <&cpg 809>; |
| renesas,id = <2>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| |
| vin2_in: endpoint { |
| remote-endpoint = <&adv7612_out>; |
| hsync-active = <0>; |
| vsync-active = <0>; |
| }; |
| }; |
| |
| port@1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| reg = <1>; |
| |
| vin2csi40: endpoint@2 { |
| reg = <2>; |
| remote-endpoint = <&csi40vin2>; |
| }; |
| }; |
| }; |
| }; |
