blob: 41e1d0cd80e5446f9acb2079ca49e5ab8ddf9039 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/st,stm32-dcmi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: STMicroelectronics STM32 Digital Camera Memory Interface (DCMI) binding
maintainers:
- Hugues Fruchet <hugues.fruchet@st.com>
properties:
compatible:
const: st,stm32-dcmi
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
maxItems: 1
clock-names:
items:
- const: mclk
dmas:
maxItems: 1
dma-names:
items:
- const: tx
resets:
maxItems: 1
port:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description:
DCMI supports a single port node with parallel bus.
properties:
endpoint:
$ref: video-interfaces.yaml#
unevaluatedProperties: false
properties:
bus-type:
enum: [5, 6]
default: 5
bus-width:
enum: [8, 10, 12, 14]
default: 8
allOf:
- if:
properties:
bus-type:
const: 6
then:
properties:
hsync-active: false
vsync-active: false
bus-width:
enum: [8]
required:
- bus-type
- pclk-sample
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- resets
- dmas
- dma-names
- port
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/stm32mp1-clks.h>
#include <dt-bindings/reset/stm32mp1-resets.h>
dcmi: dcmi@4c006000 {
compatible = "st,stm32-dcmi";
reg = <0x4c006000 0x400>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rcc CAMITF_R>;
clocks = <&rcc DCMI>;
clock-names = "mclk";
dmas = <&dmamux1 75 0x400 0x0d>;
dma-names = "tx";
port {
dcmi_0: endpoint {
remote-endpoint = <&ov5640_0>;
bus-type = <5>;
bus-width = <8>;
hsync-active = <0>;
vsync-active = <0>;
pclk-sample = <1>;
};
};
};
...