| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright (c) 2021 Inspur Corporation |
| /dts-v1/; |
| |
| #include "aspeed-g5.dtsi" |
| #include <dt-bindings/gpio/aspeed-gpio.h> |
| #include <dt-bindings/i2c/i2c.h> |
| #include <dt-bindings/leds/leds-pca955x.h> |
| |
| / { |
| model = "NF5280M6 BMC"; |
| compatible = "inspur,nf5280m6-bmc", "aspeed,ast2500"; |
| |
| chosen { |
| stdout-path = &uart5; |
| bootargs = "console=ttyS4,115200 earlycon"; |
| }; |
| |
| memory@80000000 { |
| reg = <0x80000000 0x40000000>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| vga_memory: framebuffer@9f000000 { |
| no-map; |
| reg = <0x9f000000 0x01000000>; /* 16M */ |
| }; |
| |
| video_engine_memory: jpegbuffer { |
| size = <0x02000000>; /* 32M */ |
| alignment = <0x01000000>; |
| compatible = "shared-dma-pool"; |
| reusable; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| bmc_alive { |
| label = "bmc_alive"; |
| gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>; |
| linux,default-trigger = "timer"; |
| led-pattern = <1000 1000>; |
| }; |
| |
| front-fan { |
| label = "front-fan"; |
| gpios = <&gpio ASPEED_GPIO(F,2) GPIO_ACTIVE_LOW>; |
| }; |
| |
| front-psu { |
| label = "front-psu"; |
| gpios = <&gpio ASPEED_GPIO(F,3) GPIO_ACTIVE_LOW>; |
| }; |
| |
| front-syshot { |
| label = "front-syshot"; |
| gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>; |
| }; |
| |
| front-memory { |
| label = "front-memory"; |
| gpios = <&gpio ASPEED_GPIO(S, 7) GPIO_ACTIVE_LOW>; |
| }; |
| |
| identify { |
| label = "identify"; |
| gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| iio-hwmon { |
| compatible = "iio-hwmon"; |
| io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, |
| <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, |
| <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, |
| <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>; |
| }; |
| }; |
| |
| &fmc { |
| status = "okay"; |
| flash@0 { |
| status = "okay"; |
| m25p,fast-read; |
| label = "bmc"; |
| spi-max-frequency = <50000000>; |
| #include "openbmc-flash-layout.dtsi" |
| }; |
| }; |
| |
| &spi1 { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_spi1_default>; |
| flash@0 { |
| status = "okay"; |
| m25p,fast-read; |
| label = "bios"; |
| spi-max-frequency = <100000000>; |
| }; |
| }; |
| |
| &uart1 { |
| status = "okay"; |
| }; |
| |
| &uart5 { |
| status = "okay"; |
| }; |
| |
| &mac0 { |
| status = "okay"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_rmii1_default>; |
| clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, |
| <&syscon ASPEED_CLK_MAC1RCLK>; |
| clock-names = "MACCLK", "RCLK"; |
| use-ncsi; |
| }; |
| |
| &mac1 { |
| status = "okay"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; |
| }; |
| |
| &gpio { |
| status = "okay"; |
| /* Enable GPIOE0 and GPIOE2 pass-through by default */ |
| pinctrl-names = "pass-through"; |
| pinctrl-0 = <&pinctrl_gpie0_default |
| &pinctrl_gpie2_default>; |
| gpio-line-names = |
| /*A0-A7*/ "","MAC2LINK","BMC_RESET_CPLD","","BMC_SCL9","","MAC2MDC_R","", |
| /*B0-B7*/ "BMC_INIT_OK","FM_SKU_ID2","FM_SPD_DDRCPU_LVLSHFT_DIS_R_N", |
| "FM_CPU_MSMI_CATERR_LVT3_BMC_N","","FM_CPU0_PROCHOT_LVT3_N", |
| "FM_CPU_MEM_THERMTRIP_LVT3_N","BIOS_LOAD_DEFAULT_R_N", |
| /*C0-C7*/ "","","","","","","","", |
| /*D0-D7*/ "","BMC_SD2CMD","BMC_SD2DAT0","BMC_SD2DAT1","BMC_SD2DAT2", |
| "BMC_SD2DAT3","BMC_SD2DET","BMC_SD2WPT", |
| /*E0-E7*/ "FM_BOARD_ID0","FM_BOARD_ID1","FM_BOARD_ID2","FM_BOARD_ID3", |
| "FM_BOARD_ID4","FM_BOARD_ID5","","", |
| /*F0-F7*/ "PSU1_PRESENT_N","PSU2_PRESENT_N","FAN_FAULT_LED_N","PSU_FAULT_LED_N", |
| "BIOS_DEBUG_MODE_N","FP_LCD_RESET","FAN_TYPE_SEL", |
| "RST_GLB_RST_WARN_N", |
| /*G0-G7*/ "IRQ_LPTM21L_ALERT_N","IRQ_PLD_ALERT_N","AC_FAIL_N","FP_LCD_PRESENT_BMC", |
| "BMC_JTAG_TCK_MUX_SEL","BMC_BIOS_RESERVED","SYS_NMI_N","BMC_NMI_N", |
| /*H0-H7*/ "JTAG_BMC_TDI","JTAG_BMC_TDO","JTAG_BMC_TCK","JTAG_BMC_TMS","FM_BOARD_ID6", |
| "FM_SKU_ID0","IRQ_SML1_PMBUS_ALERT_N","IRQ_SML0_ALERT_MUX_N", |
| /*I0-I7*/ "FM_CPU_ERR0_LVT3_BMC_N","FM_CPU_ERR1_LVT3_BMC_N","FM_BMC_PCH_SCI_LPC_N", |
| "FM_SYS_THROTTLE_LVC3","SPI2_PCH_CS0_N","","","", |
| /*J0-J7*/ "FM_CPU0_SKTOCC_LVT3_N","FM_CPU1_SKTOCC_LVT3_N","","SYSHOT_FAULT_LED_N", |
| "VGA_HSYNC","VGA_VSYNC","","", |
| /*K0-K7*/ "","","","","","","","", |
| /*L0-L7*/ "","","","","","","SYS_UART_TXD1","SYS_UART_RXD1", |
| /*M0-M7*/ "","","","","","","","", |
| /*N0-N7*/ "","","","","","","","", |
| /*O0-O7*/ "","","","","","","","", |
| /*P0-P7*/ "","","","","","","","", |
| /*Q0-Q7*/ "","","","","","","FM_PCH_BMC_THERMTRIP_N","INTRUDER_N", |
| /*R0-R7*/ "SPI_BMC_BOOT_CS1_R_N","FM_CPU_MEMHOT_LVC3_N", |
| "DBP_CPU_PREQ_N","FM_CPU_ERR2_LVT3_BMC_N", |
| "RISER_NCSI_EN_N","","LOM_NCSI_EN_N","OCP_NCSI_EN_N", |
| /*S0-S7*/ "BMC_XDP_PRDY_N","SIO_POWER_GOOD","BMC_PWR_DEBUG_R_N","BMC_DEBUG_EN_R_N","", |
| "GPIOS5_BMC","","GPIOS7_BMC", |
| /*T0-T7*/ "","","","","","","","", |
| /*U0-U7*/ "","","","","","","","", |
| /*V0-V7*/ "","","","","","","","", |
| /*W0-W7*/ "","","","","","","","", |
| /*X0-X7*/ "","","","","","","","", |
| /*Y0-Y7*/ "","BMC_DET_UID_N","BMC_JTAG_SEL","SIO_ONCONTROL","","","","", |
| /*Z0-Z7*/ "XDP_PRESENT_N","DBP_SYSPWROK","BMC_JTAG_SEL","FM_SMI_ACTIVE_N","", |
| "GPIOZ5","","", |
| /*AA0-AA7*/ "FP_BMC_SYSLED_N","PS_PWROK","RST_PLTRST_BMC_N","HDA_SDO_BMC", |
| "FM_SLPS4_R_N","","POWER_BUTTON","POWER_OUT", |
| /*AB0-AB7*/ "RESET_OUT","RESET_BUTTON","BIOS_REFLASH","POST_COMPLETE","","","","", |
| /*AC0-AC7*/ "","","","","","","",""; |
| }; |
| |
| &i2c0 { |
| /* FP_LCD */ |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| status = "okay"; |
| |
| eeprom@50 { |
| compatible = "atmel,24c256"; |
| reg = <0x50>; |
| label = "fru"; |
| }; |
| }; |
| |
| &i2c2 { |
| status = "okay"; |
| |
| tmp112@48 { |
| compatible = "ti,tmp112"; |
| reg = <0x48>; |
| label = "inlet"; |
| }; |
| |
| tmp112@49 { |
| compatible = "ti,tmp112"; |
| reg = <0x49>; |
| label = "outlet"; |
| }; |
| |
| pca9548@70 { |
| compatible = "nxp,pca9548"; |
| reg = <0x70>; |
| }; |
| }; |
| |
| &i2c3 { |
| status = "okay"; |
| |
| pca9548@70 { |
| compatible = "nxp,pca9548"; |
| reg = <0x70>; |
| }; |
| |
| pca9548@71 { |
| compatible = "nxp,pca9548"; |
| reg = <0x71>; |
| }; |
| |
| pca9548@72 { |
| compatible = "nxp,pca9548"; |
| reg = <0x72>; |
| }; |
| }; |
| |
| &i2c4 { |
| /* IPMB */ |
| status = "okay"; |
| }; |
| |
| &i2c5 { |
| status = "okay"; |
| |
| pca9548@70 { |
| compatible = "nxp,pca9548"; |
| reg = <0x70>; |
| }; |
| }; |
| |
| &i2c6 { |
| status = "okay"; |
| |
| pca9548@70 { |
| compatible = "nxp,pca9548"; |
| reg = <0x70>; |
| }; |
| }; |
| |
| &i2c7 { |
| status = "okay"; |
| |
| adm1278@33 { |
| compatible = "adi,adm1293"; |
| reg = <0x33>; |
| }; |
| |
| adm1278@32 { |
| compatible = "adi,adm1293"; |
| reg = <0x32>; |
| }; |
| |
| adm1278@20 { |
| compatible = "adi,adm1293"; |
| reg = <0x20>; |
| }; |
| }; |
| |
| &i2c8 { |
| status = "okay"; |
| |
| pca0: pca9555@23 { |
| compatible = "nxp,pca9555"; |
| reg = <0x23>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| gpio@0 { |
| reg = <0>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@1 { |
| reg = <1>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@2 { |
| reg = <2>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@3 { |
| reg = <3>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@4 { |
| reg = <4>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@5 { |
| reg = <5>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@6 { |
| reg = <6>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| }; |
| |
| pca1: pca9555@22 { |
| compatible = "nxp,pca9555"; |
| reg = <0x22>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| gpio@0 { |
| reg = <0>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@1 { |
| reg = <1>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@2 { |
| reg = <2>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@3 { |
| reg = <3>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@4 { |
| reg = <4>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@5 { |
| reg = <5>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@6 { |
| reg = <6>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@7 { |
| reg = <7>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| }; |
| |
| pca2: pca9555@20 { |
| compatible = "nxp,pca9555"; |
| reg = <0x20>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| gpio@0 { |
| reg = <0>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@1 { |
| reg = <1>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@2 { |
| reg = <2>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@3 { |
| reg = <3>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@4 { |
| reg = <4>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@5 { |
| reg = <5>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@6 { |
| reg = <6>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@7 { |
| reg = <7>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| }; |
| |
| pca3: pca9555@21 { |
| compatible = "nxp,pca9555"; |
| reg = <0x21>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| gpio@0 { |
| reg = <0>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@1 { |
| reg = <1>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@2 { |
| reg = <2>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@3 { |
| reg = <3>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@4 { |
| reg = <4>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@5 { |
| reg = <5>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@6 { |
| reg = <6>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@7 { |
| reg = <7>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| }; |
| }; |
| |
| &i2c9 { |
| /* cpld */ |
| status = "okay"; |
| }; |
| |
| &i2c10 { |
| status = "okay"; |
| |
| pca4: pca9555@24 { |
| compatible = "nxp,pca9555"; |
| reg = <0x24>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| gpio@0 { |
| reg = <0>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@1 { |
| reg = <1>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@2 { |
| reg = <2>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@3 { |
| reg = <3>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@4 { |
| reg = <4>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@5 { |
| reg = <5>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@6 { |
| reg = <6>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@7 { |
| reg = <7>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| }; |
| |
| pca5: pca9555@25 { |
| compatible = "nxp,pca9555"; |
| reg = <0x25>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| gpio@0 { |
| reg = <0>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@1 { |
| reg = <1>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@2 { |
| reg = <2>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@3 { |
| reg = <3>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@4 { |
| reg = <4>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@5 { |
| reg = <5>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| |
| gpio@6 { |
| reg = <6>; |
| type = <PCA955X_TYPE_GPIO>; |
| }; |
| }; |
| }; |
| |
| &i2c11 { |
| status = "okay"; |
| |
| power-supply@58 { |
| compatible = "inspur,ipsps1"; |
| reg = <0x58>; |
| }; |
| |
| power-supply@59 { |
| compatible = "inspur,ipsps1"; |
| reg = <0x59>; |
| }; |
| }; |
| |
| &i2c12 { |
| status = "okay"; |
| }; |
| |
| &i2c13 { |
| status = "okay"; |
| }; |
| |
| &pwm_tacho { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default |
| &pinctrl_pwm2_default &pinctrl_pwm3_default |
| &pinctrl_pwm4_default &pinctrl_pwm5_default |
| &pinctrl_pwm6_default &pinctrl_pwm7_default>; |
| |
| fan@0 { |
| reg = <0x00>; |
| aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>; |
| }; |
| |
| fan@1 { |
| reg = <0x01>; |
| aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>; |
| }; |
| |
| fan@2 { |
| reg = <0x02>; |
| aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>; |
| }; |
| |
| fan@3 { |
| reg = <0x03>; |
| aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>; |
| }; |
| |
| fan@4 { |
| reg = <0x04>; |
| aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>; |
| }; |
| |
| fan@5 { |
| reg = <0x05>; |
| aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>; |
| }; |
| |
| fan@6 { |
| reg = <0x06>; |
| aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>; |
| }; |
| |
| fan@7 { |
| reg = <0x07>; |
| aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>; |
| }; |
| }; |
| |
| &kcs3 { |
| status = "okay"; |
| aspeed,lpc-io-reg = <0xca2>; |
| }; |
| |
| &kcs4 { |
| status = "okay"; |
| aspeed,lpc-io-reg = <0xca4>; |
| }; |
| |
| &adc { |
| status = "okay"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default |
| &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default |
| &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default |
| &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default |
| &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default |
| &pinctrl_adc14_default &pinctrl_adc15_default>; |
| }; |
| |
| &vhub { |
| status = "okay"; |
| }; |
| |
| &video { |
| status = "okay"; |
| memory-region = <&video_engine_memory>; |
| }; |
| |
| &vuart { |
| status = "okay"; |
| }; |
