blob: c0847636f20b908b8069b842a6043e10e07cc21a [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
// Copyright (c) 2018 Inventec Corporation
/dts-v1/;
#include "aspeed-g5.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
/ {
model = "Lanyang BMC";
compatible = "inventec,lanyang-bmc", "aspeed,ast2500";
chosen {
stdout-path = &uart5;
bootargs = "console=ttyS4,115200 earlycon";
};
memory@80000000 {
reg = <0x80000000 0x40000000>;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
flash_memory: region@98000000 {
no-map;
reg = <0x98000000 0x04000000>; /* 64M */
};
};
leds {
compatible = "gpio-leds";
sys_boot_status {
label = "System_boot_status";
gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_LOW>;
};
attention {
label = "Attention_locator";
gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
};
plt_fault {
label = "Platform_fault";
gpios = <&gpio ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
};
hdd_fault {
label = "Onboard_drive_fault";
gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_HIGH>;
};
bmc_err {
lable = "BMC_fault";
gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
};
sys_err {
lable = "Sys_fault";
gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
};
};
fsi: gpio-fsi {
compatible = "fsi-master-gpio", "fsi-master";
#address-cells = <2>;
#size-cells = <0>;
clock-gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_HIGH>;
data-gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
trans-gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
mux-gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
};
iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
<&adc 13>, <&adc 14>, <&adc 15>;
};
iio-hwmon-battery {
compatible = "iio-hwmon";
io-channels = <&adc 12>;
};
};
&pwm_tacho {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
&pinctrl_pwm2_default &pinctrl_pwm3_default>;
fan@0 {
reg = <0x00>;
aspeed,fan-tach-ch = /bits/ 8 <0x00>;
};
fan@1 {
reg = <0x01>;
aspeed,fan-tach-ch = /bits/ 8 <0x01>;
};
fan@2 {
reg = <0x02>;
aspeed,fan-tach-ch = /bits/ 8 <0x02>;
};
fan@3 {
reg = <0x03>;
aspeed,fan-tach-ch = /bits/ 8 <0x03>;
};
};
&fmc {
status = "okay";
flash@0 {
status = "okay";
m25p,fast-read;
label = "bmc";
#include "openbmc-flash-layout.dtsi"
};
};
&spi1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_default>;
flash@0 {
status = "okay";
label = "pnor";
m25p,fast-read;
};
};
&spi2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2ck_default
&pinctrl_spi2cs0_default
&pinctrl_spi2cs1_default
&pinctrl_spi2miso_default
&pinctrl_spi2mosi_default>;
flash@0 {
status = "okay";
};
};
&uart1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd1_default
&pinctrl_rxd1_default>;
};
&lpc_ctrl {
status = "okay";
memory-region = <&flash_memory>;
flash = <&spi1>;
};
&lpc_snoop {
status = "okay";
snoop-ports = <0x80>;
};
&uart5 {
status = "okay";
};
&mac0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii1_default>;
clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
<&syscon ASPEED_CLK_MAC1RCLK>;
clock-names = "MACCLK", "RCLK";
use-ncsi;
};
&mac1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
};
&i2c0 {
status = "okay";
eeprom@55 {
compatible = "atmel,24c64";
reg = <0x55>;
pagesize = <32>;
};
rtc@68 {
compatible = "nxp,pcf8523";
reg = <0x68>;
};
tmp75@48 {
compatible = "ti,tmp75";
reg = <0x48>;
};
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
};
&i2c4 {
status = "okay";
};
&i2c5 {
status = "okay";
};
&i2c6 {
status = "okay";
};
&i2c7 {
status = "okay";
};
&i2c8 {
status = "okay";
};
&i2c9 {
status = "okay";
};
&i2c10 {
status = "okay";
};
&i2c11 {
status = "okay";
};
&vuart {
status = "okay";
};
&gfx {
status = "okay";
};
&pinctrl {
aspeed,external-nodes = <&gfx &lhc>;
};
&gpio {
pin_gpio_b0 {
gpio-hog;
gpios = <ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_HDD1_PWR_EN";
};
pin_gpio_b5 {
gpio-hog;
gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
input;
line-name = "BMC_USB1_OCI2";
};
pin_gpio_h5 {
gpio-hog;
gpios = <ASPEED_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_CP0_PERST_ENABLE_R";
};
pin_gpio_z2 {
gpio-hog;
gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "RST_PCA9546_U177_N";
};
pin_gpio_aa6 {
gpio-hog;
gpios = <ASPEED_GPIO(AA, 6) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_CP0_RESET_N";
};
pin_gpio_aa7 {
gpio-hog;
gpios = <ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
output-high;
line-name = "BMC_TPM_RESET_N";
};
pin_gpio_ab0 {
gpio-hog;
gpios = <ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
output-high;
line-name = "BMC_USB_PWRON_N";
};
};
&ibt {
status = "okay";
};
&adc {
status = "okay";
};
#include "ibm-power9-dual.dtsi"