blob: 8a4a02472c9a37456b1296999c55a265fd89938d [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
*/
/*
* Peripherals common to all Gumstix Overo boards (Tobi, Summit, Palo43,...)
*/
/ {
lis33_3v3: lis33-3v3-reg {
compatible = "regulator-fixed";
regulator-name = "lis33-3v3-reg";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
lis33_1v8: lis33-1v8-reg {
compatible = "regulator-fixed";
regulator-name = "lis33-1v8-reg";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
&omap3_pmx_core {
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
clock-frequency = <100000>;
/* optional 1K EEPROM with revision information */
eeprom@51 {
compatible = "atmel,24c01";
reg = <0x51>;
pagesize = <8>;
};
lis33de: lis33de@1d {
compatible = "st,lis33de", "st,lis3lv02d";
reg = <0x1d>;
Vdd-supply = <&lis33_1v8>;
Vdd_IO-supply = <&lis33_3v3>;
st,click-single-x;
st,click-single-y;
st,click-single-z;
st,click-thresh-x = <10>;
st,click-thresh-y = <10>;
st,click-thresh-z = <10>;
st,irq1-click;
st,irq2-click;
st,wakeup-x-lo;
st,wakeup-x-hi;
st,wakeup-y-lo;
st,wakeup-y-hi;
st,wakeup-z-lo;
st,wakeup-z-hi;
st,min-limit-x = <120>;
st,min-limit-y = <120>;
st,min-limit-z = <140>;
st,max-limit-x = <550>;
st,max-limit-y = <550>;
st,max-limit-z = <750>;
};
};
&mmc3 {
status = "disabled";
};
&uart3 {
interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};