blob: cafa3046daa4baf48fbf6871c6e7a8c22ebd4022 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for the SILK board
*
* Copyright (C) 2014 Renesas Electronics Corporation
* Copyright (C) 2014-2015 Renesas Solutions Corp.
* Copyright (C) 2014-2015 Cogent Embedded, Inc.
*/
/*
* SSI-AK4643
*
* SW1: 2-1: AK4643
* 2-3: ADV7511
*
* This command is required before playback/capture:
*
* amixer set "LINEOUT Mixer DACL" on
*/
/dts-v1/;
#include "r8a7794.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "SILK";
compatible = "renesas,silk", "renesas,r8a7794";
aliases {
serial0 = &scif2;
i2c9 = &gpioi2c1;
i2c10 = &i2chdmi;
mmc0 = &mmcif0;
mmc1 = &sdhi1;
};
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
memory@40000000 {
device_type = "memory";
reg = <0 0x40000000 0 0x40000000>;
};
keyboard {
compatible = "gpio-keys";
pinctrl-0 = <&keyboard_pins>;
pinctrl-names = "default";
key-3 {
gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_3>;
label = "SW3";
wakeup-source;
debounce-interval = <20>;
};
key-4 {
gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_4>;
label = "SW4";
wakeup-source;
debounce-interval = <20>;
};
key-6 {
gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_6>;
label = "SW6";
wakeup-source;
debounce-interval = <20>;
};
key-a {
gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
linux,code = <KEY_A>;
label = "SW12-1";
wakeup-source;
debounce-interval = <20>;
};
key-b {
gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_B>;
label = "SW12-2";
wakeup-source;
debounce-interval = <20>;
};
key-c {
gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_C>;
label = "SW12-3";
wakeup-source;
debounce-interval = <20>;
};
key-d {
gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_D>;
label = "SW12-4";
wakeup-source;
debounce-interval = <20>;
};
};
d3_3v: regulator-d3-3v {
compatible = "regulator-fixed";
regulator-name = "D3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
vcc_sdhi1: regulator-vcc-sdhi1 {
compatible = "regulator-fixed";
regulator-name = "SDHI1 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vccq_sdhi1: regulator-vccq-sdhi1 {
compatible = "regulator-gpio";
regulator-name = "SDHI1 VccQ";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
states = <3300000 1>, <1800000 0>;
};
vga-encoder {
compatible = "adi,adv7123";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7123_in: endpoint {
remote-endpoint = <&du_out_rgb1>;
};
};
port@1 {
reg = <1>;
adv7123_out: endpoint {
remote-endpoint = <&vga_in>;
};
};
};
};
hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con: endpoint {
remote-endpoint = <&adv7511_out>;
};
};
};
vga {
compatible = "vga-connector";
port {
vga_in: endpoint {
remote-endpoint = <&adv7123_out>;
};
};
};
x2_clk: x2-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <148500000>;
};
x3_clk: x3-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <74250000>;
};
x9_clk: audio_clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <12288000>;
};
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "left_j";
simple-audio-card,bitclock-master = <&soundcodec>;
simple-audio-card,frame-master = <&soundcodec>;
simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
soundcodec: simple-audio-card,codec {
sound-dai = <&ak4643>;
clocks = <&x9_clk>;
};
};
gpioi2c1: i2c-9 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "i2c-gpio";
status = "disabled";
scl-gpios = <&gpio4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-gpio,delay-us = <5>;
};
/*
* A fallback to GPIO is provided for I2C1.
*/
i2chdmi: i2c-10 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&i2c1>, <&gpioi2c1>;
i2c-bus-name = "i2c-hdmi";
#address-cells = <1>;
#size-cells = <0>;
ak4643: codec@12 {
compatible = "asahi-kasei,ak4643";
#sound-dai-cells = <0>;
reg = <0x12>;
};
composite-in@20 {
compatible = "adi,adv7180";
reg = <0x20>;
port {
adv7180: endpoint {
bus-width = <8>;
remote-endpoint = <&vin0ep>;
};
};
};
hdmi@39 {
compatible = "adi,adv7511w";
reg = <0x39>;
interrupt-parent = <&gpio5>;
interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7511_in: endpoint {
remote-endpoint = <&du_out_rgb0>;
};
};
port@1 {
reg = <1>;
adv7511_out: endpoint {
remote-endpoint = <&hdmi_con>;
};
};
};
};
eeprom@50 {
compatible = "renesas,r1ex24002", "atmel,24c02";
reg = <0x50>;
pagesize = <16>;
};
};
};
&extal_clk {
clock-frequency = <20000000>;
};
&pfc {
pinctrl-0 = <&scif_clk_pins>;
pinctrl-names = "default";
scif2_pins: scif2 {
groups = "scif2_data";
function = "scif2";
};
scif_clk_pins: scif_clk {
groups = "scif_clk";
function = "scif_clk";
};
ether_pins: ether {
groups = "eth_link", "eth_mdio", "eth_rmii";
function = "eth";
};
phy1_pins: phy1 {
groups = "intc_irq8";
function = "intc";
};
i2c1_pins: i2c1 {
groups = "i2c1";
function = "i2c1";
};
mmcif0_pins: mmcif0 {
groups = "mmc_data8", "mmc_ctrl";
function = "mmc";
};
sdhi1_pins: sd1 {
groups = "sdhi1_data4", "sdhi1_ctrl";
function = "sdhi1";
};
qspi_pins: qspi {
groups = "qspi_ctrl", "qspi_data4";
function = "qspi";
};
vin0_pins: vin0 {
groups = "vin0_data8", "vin0_clk";
function = "vin0";
};
usb0_pins: usb0 {
groups = "usb0";
function = "usb0";
};
usb1_pins: usb1 {
groups = "usb1";
function = "usb1";
};
du0_pins: du0 {
groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
function = "du0";
};
du1_pins: du1 {
groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
function = "du1";
};
keyboard_pins: keyboard {
pins = "GP_3_9", "GP_3_10", "GP_3_11", "GP_3_12";
bias-pull-up;
};
ssi_pins: sound {
groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
function = "ssi";
};
audio_clk_pins: audio_clk {
groups = "audio_clkc";
function = "audio_clk";
};
};
&scif2 {
pinctrl-0 = <&scif2_pins>;
pinctrl-names = "default";
status = "okay";
};
&scif_clk {
clock-frequency = <14745600>;
};
&ether {
pinctrl-0 = <&ether_pins>, <&phy1_pins>;
pinctrl-names = "default";
phy-handle = <&phy1>;
renesas,ether-link-active-low;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
interrupt-parent = <&irqc0>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
micrel,led-mode = <1>;
reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
};
};
&i2c1 {
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "i2c-hdmi";
clock-frequency = <400000>;
};
&i2c7 {
status = "okay";
clock-frequency = <100000>;
pmic@58 {
compatible = "dlg,da9063";
reg = <0x58>;
interrupt-parent = <&gpio3>;
interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
onkey {
compatible = "dlg,da9063-onkey";
};
rtc {
compatible = "dlg,da9063-rtc";
};
wdt {
compatible = "dlg,da9063-watchdog";
};
};
};
&mmcif0 {
pinctrl-0 = <&mmcif0_pins>;
pinctrl-names = "default";
vmmc-supply = <&d3_3v>;
vqmmc-supply = <&d3_3v>;
bus-width = <8>;
non-removable;
status = "okay";
};
&sdhi1 {
pinctrl-0 = <&sdhi1_pins>;
pinctrl-names = "default";
vmmc-supply = <&vcc_sdhi1>;
vqmmc-supply = <&vccq_sdhi1>;
cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
status = "okay";
};
&qspi {
pinctrl-0 = <&qspi_pins>;
pinctrl-names = "default";
status = "okay";
flash@0 {
compatible = "spansion,s25fl512s", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
spi-cpol;
spi-cpha;
m25p,fast-read;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "loader";
reg = <0x00000000 0x00040000>;
read-only;
};
partition@40000 {
label = "user";
reg = <0x00040000 0x00400000>;
read-only;
};
partition@440000 {
label = "flash";
reg = <0x00440000 0x03bc0000>;
};
};
};
};
/* composite video input */
&vin0 {
status = "okay";
pinctrl-0 = <&vin0_pins>;
pinctrl-names = "default";
port {
vin0ep: endpoint {
remote-endpoint = <&adv7180>;
bus-width = <8>;
};
};
};
&pci0 {
status = "okay";
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
};
&pci1 {
status = "okay";
pinctrl-0 = <&usb1_pins>;
pinctrl-names = "default";
};
&usbphy {
status = "okay";
};
&du {
pinctrl-0 = <&du0_pins>, <&du1_pins>;
pinctrl-names = "default";
status = "okay";
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
<&x2_clk>, <&x3_clk>;
clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
ports {
port@0 {
endpoint {
remote-endpoint = <&adv7511_in>;
};
};
port@1 {
endpoint {
remote-endpoint = <&adv7123_in>;
};
};
};
};
&rcar_sound {
pinctrl-0 = <&ssi_pins>, <&audio_clk_pins>;
pinctrl-names = "default";
status = "okay";
/* Single DAI */
#sound-dai-cells = <0>;
rcar_sound,dai {
dai0 {
playback = <&ssi0>;
capture = <&ssi1>;
};
};
};
&rwdt {
timeout-sec = <60>;
status = "okay";
};
&ssi1 {
shared-pin;
};