// SPDX-License-Identifier: GPL-2.0
/dts-v1/;

#include "tegra30-cardhu.dtsi"

/* This dts file support the cardhu A04 and later versions of board */

/ {
	model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board";
	compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30";

	mmc@78000400 {
		status = "okay";
		power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
		bus-width = <4>;
		keep-power-in-suspend;
	};

	ddr_reg: regulator@100 {
		compatible = "regulator-fixed";
		regulator-name = "ddr";
		regulator-min-microvolt = <1500000>;
		regulator-max-microvolt = <1500000>;
		regulator-always-on;
		regulator-boot-on;
		enable-active-high;
		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
	};

	sys_3v3_reg: regulator@101 {
		compatible = "regulator-fixed";
		regulator-name = "sys_3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
		regulator-boot-on;
		enable-active-high;
		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
	};

	usb1_vbus_reg: regulator@102 {
		compatible = "regulator-fixed";
		regulator-name = "usb1_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		enable-active-high;
		gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
		gpio-open-drain;
		vin-supply = <&vdd_5v0_reg>;
	};

	usb3_vbus_reg: regulator@103 {
		compatible = "regulator-fixed";
		regulator-name = "usb3_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		enable-active-high;
		gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
		gpio-open-drain;
		vin-supply = <&vdd_5v0_reg>;
	};

	vdd_5v0_reg: regulator@104 {
		compatible = "regulator-fixed";
		regulator-name = "5v0";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		enable-active-high;
		gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
	};

	vdd_bl_reg: regulator@105 {
		compatible = "regulator-fixed";
		regulator-name = "vdd_bl";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
		regulator-boot-on;
		enable-active-high;
		gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
	};

	vdd_bl2_reg: regulator@106 {
		compatible = "regulator-fixed";
		regulator-name = "vdd_bl2";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
		regulator-boot-on;
		enable-active-high;
		gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
	};
};