blob: c8921e2d6480f50cec0566898c3e8aa78fdfa161 [file] [log] [blame]
// SPDX-License-Identifier: BSD-3-Clause
/*
* SC7180 SoC device tree source
*
* Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
*/
#include <dt-bindings/clock/qcom,dispcc-sc7180.h>
#include <dt-bindings/clock/qcom,gcc-sc7180.h>
#include <dt-bindings/clock/qcom,gpucc-sc7180.h>
#include <dt-bindings/clock/qcom,lpasscorecc-sc7180.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,videocc-sc7180.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interconnect/qcom,sc7180.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/phy/phy-qcom-qusb2.h>
#include <dt-bindings/power/qcom-aoss-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
#include <dt-bindings/reset/qcom,sdm845-pdc.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
#address-cells = <2>;
#size-cells = <2>;
chosen { };
aliases {
mmc1 = &sdhc_1;
mmc2 = &sdhc_2;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
i2c6 = &i2c6;
i2c7 = &i2c7;
i2c8 = &i2c8;
i2c9 = &i2c9;
i2c10 = &i2c10;
i2c11 = &i2c11;
spi0 = &spi0;
spi1 = &spi1;
spi3 = &spi3;
spi5 = &spi5;
spi6 = &spi6;
spi8 = &spi8;
spi10 = &spi10;
spi11 = &spi11;
};
clocks {
xo_board: xo-board {
compatible = "fixed-clock";
clock-frequency = <38400000>;
#clock-cells = <0>;
};
sleep_clk: sleep-clk {
compatible = "fixed-clock";
clock-frequency = <32764>;
#clock-cells = <0>;
};
};
reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
hyp_mem: memory@80000000 {
reg = <0x0 0x80000000 0x0 0x600000>;
no-map;
};
xbl_mem: memory@80600000 {
reg = <0x0 0x80600000 0x0 0x200000>;
no-map;
};
aop_mem: memory@80800000 {
reg = <0x0 0x80800000 0x0 0x20000>;
no-map;
};
aop_cmd_db_mem: memory@80820000 {
reg = <0x0 0x80820000 0x0 0x20000>;
compatible = "qcom,cmd-db";
no-map;
};
sec_apps_mem: memory@808ff000 {
reg = <0x0 0x808ff000 0x0 0x1000>;
no-map;
};
smem_mem: memory@80900000 {
reg = <0x0 0x80900000 0x0 0x200000>;
no-map;
};
tz_mem: memory@80b00000 {
reg = <0x0 0x80b00000 0x0 0x3900000>;
no-map;
};
ipa_fw_mem: memory@8b700000 {
reg = <0 0x8b700000 0 0x10000>;
no-map;
};
rmtfs_mem: memory@94600000 {
compatible = "qcom,rmtfs-mem";
reg = <0x0 0x94600000 0x0 0x200000>;
no-map;
qcom,client-id = <1>;
qcom,vmid = <15>;
};
};
cpus {
#address-cells = <2>;
#size-cells = <0>;
CPU0: cpu@0 {
device_type = "cpu";
compatible = "qcom,kryo468";
reg = <0x0 0x0>;
enable-method = "psci";
cpu-idle-states = <&LITTLE_CPU_SLEEP_0
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
next-level-cache = <&L2_0>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
L2_0: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
L3_0: l3-cache {
compatible = "cache";
};
};
};
CPU1: cpu@100 {
device_type = "cpu";
compatible = "qcom,kryo468";
reg = <0x0 0x100>;
enable-method = "psci";
cpu-idle-states = <&LITTLE_CPU_SLEEP_0
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_100>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
L2_100: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
};
};
CPU2: cpu@200 {
device_type = "cpu";
compatible = "qcom,kryo468";
reg = <0x0 0x200>;
enable-method = "psci";
cpu-idle-states = <&LITTLE_CPU_SLEEP_0
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_200>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
L2_200: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
};
};
CPU3: cpu@300 {
device_type = "cpu";
compatible = "qcom,kryo468";
reg = <0x0 0x300>;
enable-method = "psci";
cpu-idle-states = <&LITTLE_CPU_SLEEP_0
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_300>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
L2_300: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
};
};
CPU4: cpu@400 {
device_type = "cpu";
compatible = "qcom,kryo468";
reg = <0x0 0x400>;
enable-method = "psci";
cpu-idle-states = <&LITTLE_CPU_SLEEP_0
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_400>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
L2_400: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
};
};
CPU5: cpu@500 {
device_type = "cpu";
compatible = "qcom,kryo468";
reg = <0x0 0x500>;
enable-method = "psci";
cpu-idle-states = <&LITTLE_CPU_SLEEP_0
&LITTLE_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <100>;
next-level-cache = <&L2_500>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 0>;
L2_500: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
};
};
CPU6: cpu@600 {
device_type = "cpu";
compatible = "qcom,kryo468";
reg = <0x0 0x600>;
enable-method = "psci";
cpu-idle-states = <&BIG_CPU_SLEEP_0
&BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1740>;
dynamic-power-coefficient = <405>;
next-level-cache = <&L2_600>;
operating-points-v2 = <&cpu6_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 1>;
L2_600: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
};
};
CPU7: cpu@700 {
device_type = "cpu";
compatible = "qcom,kryo468";
reg = <0x0 0x700>;
enable-method = "psci";
cpu-idle-states = <&BIG_CPU_SLEEP_0
&BIG_CPU_SLEEP_1
&CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <1740>;
dynamic-power-coefficient = <405>;
next-level-cache = <&L2_700>;
operating-points-v2 = <&cpu6_opp_table>;
interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
#cooling-cells = <2>;
qcom,freq-domain = <&cpufreq_hw 1>;
L2_700: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
};
};
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
core1 {
cpu = <&CPU1>;
};
core2 {
cpu = <&CPU2>;
};
core3 {
cpu = <&CPU3>;
};
core4 {
cpu = <&CPU4>;
};
core5 {
cpu = <&CPU5>;
};
core6 {
cpu = <&CPU6>;
};
core7 {
cpu = <&CPU7>;
};
};
};
idle-states {
entry-method = "psci";
LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
compatible = "arm,idle-state";
idle-state-name = "little-power-down";
arm,psci-suspend-param = <0x40000003>;
entry-latency-us = <549>;
exit-latency-us = <901>;
min-residency-us = <1774>;
local-timer-stop;
};
LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
compatible = "arm,idle-state";
idle-state-name = "little-rail-power-down";
arm,psci-suspend-param = <0x40000004>;
entry-latency-us = <702>;
exit-latency-us = <915>;
min-residency-us = <4001>;
local-timer-stop;
};
BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
compatible = "arm,idle-state";
idle-state-name = "big-power-down";
arm,psci-suspend-param = <0x40000003>;
entry-latency-us = <523>;
exit-latency-us = <1244>;
min-residency-us = <2207>;
local-timer-stop;
};
BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
compatible = "arm,idle-state";
idle-state-name = "big-rail-power-down";
arm,psci-suspend-param = <0x40000004>;
entry-latency-us = <526>;
exit-latency-us = <1854>;
min-residency-us = <5555>;
local-timer-stop;
};
CLUSTER_SLEEP_0: cluster-sleep-0 {
compatible = "arm,idle-state";
idle-state-name = "cluster-power-down";
arm,psci-suspend-param = <0x40003444>;
entry-latency-us = <3263>;
exit-latency-us = <6562>;
min-residency-us = <9926>;
local-timer-stop;
};
};
};
cpu0_opp_table: cpu0_opp_table {
compatible = "operating-points-v2";
opp-shared;
cpu0_opp1: opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-peak-kBps = <1200000 4800000>;
};
cpu0_opp2: opp-576000000 {
opp-hz = /bits/ 64 <576000000>;
opp-peak-kBps = <1200000 4800000>;
};
cpu0_opp3: opp-768000000 {
opp-hz = /bits/ 64 <768000000>;
opp-peak-kBps = <1200000 4800000>;
};
cpu0_opp4: opp-1017600000 {
opp-hz = /bits/ 64 <1017600000>;
opp-peak-kBps = <1804000 8908800>;
};
cpu0_opp5: opp-1248000000 {
opp-hz = /bits/ 64 <1248000000>;
opp-peak-kBps = <2188000 12902400>;
};
cpu0_opp6: opp-1324800000 {
opp-hz = /bits/ 64 <1324800000>;
opp-peak-kBps = <2188000 12902400>;
};
cpu0_opp7: opp-1516800000 {
opp-hz = /bits/ 64 <1516800000>;
opp-peak-kBps = <3072000 15052800>;
};
cpu0_opp8: opp-1612800000 {
opp-hz = /bits/ 64 <1612800000>;
opp-peak-kBps = <3072000 15052800>;
};
cpu0_opp9: opp-1708800000 {
opp-hz = /bits/ 64 <1708800000>;
opp-peak-kBps = <3072000 15052800>;
};
cpu0_opp10: opp-1804800000 {
opp-hz = /bits/ 64 <1804800000>;
opp-peak-kBps = <4068000 22425600>;
};
};
cpu6_opp_table: cpu6_opp_table {
compatible = "operating-points-v2";
opp-shared;
cpu6_opp1: opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
opp-peak-kBps = <2188000 8908800>;
};
cpu6_opp2: opp-652800000 {
opp-hz = /bits/ 64 <652800000>;
opp-peak-kBps = <2188000 8908800>;
};
cpu6_opp3: opp-825600000 {
opp-hz = /bits/ 64 <825600000>;
opp-peak-kBps = <2188000 8908800>;
};
cpu6_opp4: opp-979200000 {
opp-hz = /bits/ 64 <979200000>;
opp-peak-kBps = <2188000 8908800>;
};
cpu6_opp5: opp-1113600000 {
opp-hz = /bits/ 64 <1113600000>;
opp-peak-kBps = <2188000 8908800>;
};
cpu6_opp6: opp-1267200000 {
opp-hz = /bits/ 64 <1267200000>;
opp-peak-kBps = <4068000 12902400>;
};
cpu6_opp7: opp-1555200000 {
opp-hz = /bits/ 64 <1555200000>;
opp-peak-kBps = <4068000 15052800>;
};
cpu6_opp8: opp-1708800000 {
opp-hz = /bits/ 64 <1708800000>;
opp-peak-kBps = <6220000 19353600>;
};
cpu6_opp9: opp-1843200000 {
opp-hz = /bits/ 64 <1843200000>;
opp-peak-kBps = <6220000 19353600>;
};
cpu6_opp10: opp-1900800000 {
opp-hz = /bits/ 64 <1900800000>;
opp-peak-kBps = <6220000 22425600>;
};
cpu6_opp11: opp-1996800000 {
opp-hz = /bits/ 64 <1996800000>;
opp-peak-kBps = <6220000 22425600>;
};
cpu6_opp12: opp-2112000000 {
opp-hz = /bits/ 64 <2112000000>;
opp-peak-kBps = <6220000 22425600>;
};
cpu6_opp13: opp-2208000000 {
opp-hz = /bits/ 64 <2208000000>;
opp-peak-kBps = <7216000 22425600>;
};
cpu6_opp14: opp-2323200000 {
opp-hz = /bits/ 64 <2323200000>;
opp-peak-kBps = <7216000 22425600>;
};
cpu6_opp15: opp-2400000000 {
opp-hz = /bits/ 64 <2400000000>;
opp-peak-kBps = <8532000 23347200>;
};
cpu6_opp16: opp-2553600000 {
opp-hz = /bits/ 64 <2553600000>;
opp-peak-kBps = <8532000 23347200>;
};
};
memory@80000000 {
device_type = "memory";
/* We expect the bootloader to fill in the size */
reg = <0 0x80000000 0 0>;
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
};
firmware {
scm {
compatible = "qcom,scm-sc7180", "qcom,scm";
};
};
tcsr_mutex: hwlock {
compatible = "qcom,tcsr-mutex";
syscon = <&tcsr_mutex_regs 0 0x1000>;
#hwlock-cells = <1>;
};
smem {
compatible = "qcom,smem";
memory-region = <&smem_mem>;
hwlocks = <&tcsr_mutex 3>;
};
smp2p-cdsp {
compatible = "qcom,smp2p";
qcom,smem = <94>, <432>;
interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apss_shared 6>;
qcom,local-pid = <0>;
qcom,remote-pid = <5>;
cdsp_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
cdsp_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-lpass {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apss_shared 10>;
qcom,local-pid = <0>;
qcom,remote-pid = <2>;
adsp_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
adsp_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-mpss {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;
interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apss_shared 14>;
qcom,local-pid = <0>;
qcom,remote-pid = <1>;
modem_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
modem_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
ipa_smp2p_out: ipa-ap-to-modem {
qcom,entry-name = "ipa";
#qcom,smem-state-cells = <1>;
};
ipa_smp2p_in: ipa-modem-to-ap {
qcom,entry-name = "ipa";
interrupt-controller;
#interrupt-cells = <2>;
};
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
soc: soc@0 {
#address-cells = <2>;
#size-cells = <2>;
ranges = <0 0 0 0 0x10 0>;
dma-ranges = <0 0 0 0 0x10 0>;
compatible = "simple-bus";
gcc: clock-controller@100000 {
compatible = "qcom,gcc-sc7180";
reg = <0 0x00100000 0 0x1f0000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>,
<&sleep_clk>;
clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
qfprom: efuse@784000 {
compatible = "qcom,sc7180-qfprom", "qcom,qfprom";
reg = <0 0x00784000 0 0x7a0>,
<0 0x00780000 0 0x7a0>,
<0 0x00782000 0 0x100>,
<0 0x00786000 0 0x1fff>;
clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>;
clock-names = "core";
#address-cells = <1>;
#size-cells = <1>;
qusb2p_hstx_trim: hstx-trim-primary@25b {
reg = <0x25b 0x1>;
bits = <1 3>;
};
gpu_speed_bin: gpu_speed_bin@1d2 {
reg = <0x1d2 0x2>;
bits = <5 8>;
};
};
sdhc_1: sdhci@7c4000 {
compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x7c4000 0 0x1000>,
<0 0x07c5000 0 0x1000>;
reg-names = "hc", "cqhci";
iommus = <&apps_smmu 0x60 0x0>;
interrupts = <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
<&gcc GCC_SDCC1_AHB_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "core", "iface", "xo";
interconnects = <&aggre1_noc MASTER_EMMC 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_EMMC_CFG 0>;
interconnect-names = "sdhc-ddr","cpu-sdhc";
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&sdhc1_opp_table>;
bus-width = <8>;
non-removable;
supports-cqe;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
status = "disabled";
sdhc1_opp_table: sdhc1-opp-table {
compatible = "operating-points-v2";
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_low_svs>;
opp-peak-kBps = <1800000 600000>;
opp-avg-kBps = <100000 0>;
};
opp-384000000 {
opp-hz = /bits/ 64 <384000000>;
required-opps = <&rpmhpd_opp_nom>;
opp-peak-kBps = <5400000 1600000>;
opp-avg-kBps = <390000 0>;
};
};
};
qup_opp_table: qup-opp-table {
compatible = "operating-points-v2";
opp-75000000 {
opp-hz = /bits/ 64 <75000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-128000000 {
opp-hz = /bits/ 64 <128000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0 0x008c0000 0 0x6000>;
clock-names = "m-ahb", "s-ahb";
clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
iommus = <&apps_smmu 0x43 0x0>;
status = "disabled";
i2c0: i2c@880000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00880000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c0_default>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
power-domains = <&rpmhpd SC7180_CX>;
required-opps = <&rpmhpd_opp_low_svs>;
status = "disabled";
};
spi0: spi@880000 {
compatible = "qcom,geni-spi";
reg = <0 0x00880000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi0_default>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart0: serial@880000 {
compatible = "qcom,geni-uart";
reg = <0 0x00880000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart0_default>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c1: i2c@884000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00884000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
power-domains = <&rpmhpd SC7180_CX>;
required-opps = <&rpmhpd_opp_low_svs>;
status = "disabled";
};
spi1: spi@884000 {
compatible = "qcom,geni-spi";
reg = <0 0x00884000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart1: serial@884000 {
compatible = "qcom,geni-uart";
reg = <0 0x00884000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c2: i2c@888000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00888000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
power-domains = <&rpmhpd SC7180_CX>;
required-opps = <&rpmhpd_opp_low_svs>;
status = "disabled";
};
uart2: serial@888000 {
compatible = "qcom,geni-uart";
reg = <0 0x00888000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c3: i2c@88c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x0088c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c3_default>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
power-domains = <&rpmhpd SC7180_CX>;
required-opps = <&rpmhpd_opp_low_svs>;
status = "disabled";
};
spi3: spi@88c000 {
compatible = "qcom,geni-spi";
reg = <0 0x0088c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi3_default>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart3: serial@88c000 {
compatible = "qcom,geni-uart";
reg = <0 0x0088c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart3_default>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c4: i2c@890000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00890000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c4_default>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
power-domains = <&rpmhpd SC7180_CX>;
required-opps = <&rpmhpd_opp_low_svs>;
status = "disabled";
};
uart4: serial@890000 {
compatible = "qcom,geni-uart";
reg = <0 0x00890000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart4_default>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c5: i2c@894000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00894000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c5_default>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
power-domains = <&rpmhpd SC7180_CX>;
required-opps = <&rpmhpd_opp_low_svs>;
status = "disabled";
};
spi5: spi@894000 {
compatible = "qcom,geni-spi";
reg = <0 0x00894000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi5_default>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart5: serial@894000 {
compatible = "qcom,geni-uart";
reg = <0 0x00894000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart5_default>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
};
qupv3_id_1: geniqup@ac0000 {
compatible = "qcom,geni-se-qup";
reg = <0 0x00ac0000 0 0x6000>;
clock-names = "m-ahb", "s-ahb";
clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
iommus = <&apps_smmu 0x4c3 0x0>;
status = "disabled";
i2c6: i2c@a80000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a80000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c6_default>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
power-domains = <&rpmhpd SC7180_CX>;
required-opps = <&rpmhpd_opp_low_svs>;
status = "disabled";
};
spi6: spi@a80000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a80000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi6_default>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart6: serial@a80000 {
compatible = "qcom,geni-uart";
reg = <0 0x00a80000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart6_default>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c7: i2c@a84000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a84000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c7_default>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
power-domains = <&rpmhpd SC7180_CX>;
required-opps = <&rpmhpd_opp_low_svs>;
status = "disabled";
};
uart7: serial@a84000 {
compatible = "qcom,geni-uart";
reg = <0 0x00a84000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart7_default>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c8: i2c@a88000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a88000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c8_default>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
power-domains = <&rpmhpd SC7180_CX>;
required-opps = <&rpmhpd_opp_low_svs>;
status = "disabled";
};
spi8: spi@a88000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a88000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi8_default>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart8: serial@a88000 {
compatible = "qcom,geni-debug-uart";
reg = <0 0x00a88000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart8_default>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c9: i2c@a8c000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a8c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c9_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
power-domains = <&rpmhpd SC7180_CX>;
required-opps = <&rpmhpd_opp_low_svs>;
status = "disabled";
};
uart9: serial@a8c000 {
compatible = "qcom,geni-uart";
reg = <0 0x00a8c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart9_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c10: i2c@a90000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a90000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c10_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
power-domains = <&rpmhpd SC7180_CX>;
required-opps = <&rpmhpd_opp_low_svs>;
status = "disabled";
};
spi10: spi@a90000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a90000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi10_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart10: serial@a90000 {
compatible = "qcom,geni-uart";
reg = <0 0x00a90000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart10_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
i2c11: i2c@a94000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a94000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c11_default>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "qup-core", "qup-config",
"qup-memory";
power-domains = <&rpmhpd SC7180_CX>;
required-opps = <&rpmhpd_opp_low_svs>;
status = "disabled";
};
spi11: spi@a94000 {
compatible = "qcom,geni-spi";
reg = <0 0x00a94000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_spi11_default>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
uart11: serial@a94000 {
compatible = "qcom,geni-uart";
reg = <0 0x00a94000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
pinctrl-names = "default";
pinctrl-0 = <&qup_uart11_default>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qup_opp_table>;
interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
interconnect-names = "qup-core", "qup-config";
status = "disabled";
};
};
config_noc: interconnect@1500000 {
compatible = "qcom,sc7180-config-noc";
reg = <0 0x01500000 0 0x28000>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
system_noc: interconnect@1620000 {
compatible = "qcom,sc7180-system-noc";
reg = <0 0x01620000 0 0x17080>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
mc_virt: interconnect@1638000 {
compatible = "qcom,sc7180-mc-virt";
reg = <0 0x01638000 0 0x1000>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
qup_virt: interconnect@1650000 {
compatible = "qcom,sc7180-qup-virt";
reg = <0 0x01650000 0 0x1000>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
aggre1_noc: interconnect@16e0000 {
compatible = "qcom,sc7180-aggre1-noc";
reg = <0 0x016e0000 0 0x15080>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
aggre2_noc: interconnect@1705000 {
compatible = "qcom,sc7180-aggre2-noc";
reg = <0 0x01705000 0 0x9000>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
compute_noc: interconnect@170e000 {
compatible = "qcom,sc7180-compute-noc";
reg = <0 0x0170e000 0 0x6000>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
mmss_noc: interconnect@1740000 {
compatible = "qcom,sc7180-mmss-noc";
reg = <0 0x01740000 0 0x1c100>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
ipa_virt: interconnect@1e00000 {
compatible = "qcom,sc7180-ipa-virt";
reg = <0 0x01e00000 0 0x1000>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
ipa: ipa@1e40000 {
compatible = "qcom,sc7180-ipa";
iommus = <&apps_smmu 0x440 0x0>,
<&apps_smmu 0x442 0x0>;
reg = <0 0x1e40000 0 0x7000>,
<0 0x1e47000 0 0x2000>,
<0 0x1e04000 0 0x2c000>;
reg-names = "ipa-reg",
"ipa-shared",
"gsi";
interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
<&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
<&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ipa",
"gsi",
"ipa-clock-query",
"ipa-setup-ready";
clocks = <&rpmhcc RPMH_IPA_CLK>;
clock-names = "core";
interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
<&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
interconnect-names = "memory",
"imem",
"config";
qcom,smem-states = <&ipa_smp2p_out 0>,
<&ipa_smp2p_out 1>;
qcom,smem-state-names = "ipa-clock-enabled-valid",
"ipa-clock-enabled";
status = "disabled";
};
tcsr_mutex_regs: syscon@1f40000 {
compatible = "syscon";
reg = <0 0x01f40000 0 0x40000>;
};
tcsr_regs: syscon@1fc0000 {
compatible = "syscon";
reg = <0 0x01fc0000 0 0x40000>;
};
tlmm: pinctrl@3500000 {
compatible = "qcom,sc7180-pinctrl";
reg = <0 0x03500000 0 0x300000>,
<0 0x03900000 0 0x300000>,
<0 0x03d00000 0 0x300000>;
reg-names = "west", "north", "south";
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-ranges = <&tlmm 0 0 120>;
wakeup-parent = <&pdc>;
dp_hot_plug_det: dp-hot-plug-det {
pinmux {
pins = "gpio117";
function = "dp_hot";
};
};
qspi_clk: qspi-clk {
pinmux {
pins = "gpio63";
function = "qspi_clk";
};
};
qspi_cs0: qspi-cs0 {
pinmux {
pins = "gpio68";
function = "qspi_cs";
};
};
qspi_cs1: qspi-cs1 {
pinmux {
pins = "gpio72";
function = "qspi_cs";
};
};
qspi_data01: qspi-data01 {
pinmux-data {
pins = "gpio64", "gpio65";
function = "qspi_data";
};
};
qspi_data12: qspi-data12 {
pinmux-data {
pins = "gpio66", "gpio67";
function = "qspi_data";
};
};
qup_i2c0_default: qup-i2c0-default {
pinmux {
pins = "gpio34", "gpio35";
function = "qup00";
};
};
qup_i2c1_default: qup-i2c1-default {
pinmux {
pins = "gpio0", "gpio1";
function = "qup01";
};
};
qup_i2c2_default: qup-i2c2-default {
pinmux {
pins = "gpio15", "gpio16";
function = "qup02_i2c";
};
};
qup_i2c3_default: qup-i2c3-default {
pinmux {
pins = "gpio38", "gpio39";
function = "qup03";
};
};
qup_i2c4_default: qup-i2c4-default {
pinmux {
pins = "gpio115", "gpio116";
function = "qup04_i2c";
};
};
qup_i2c5_default: qup-i2c5-default {
pinmux {
pins = "gpio25", "gpio26";
function = "qup05";
};
};
qup_i2c6_default: qup-i2c6-default {
pinmux {
pins = "gpio59", "gpio60";
function = "qup10";
};
};
qup_i2c7_default: qup-i2c7-default {
pinmux {
pins = "gpio6", "gpio7";
function = "qup11_i2c";
};
};
qup_i2c8_default: qup-i2c8-default {
pinmux {
pins = "gpio42", "gpio43";
function = "qup12";
};
};
qup_i2c9_default: qup-i2c9-default {
pinmux {
pins = "gpio46", "gpio47";
function = "qup13_i2c";
};
};
qup_i2c10_default: qup-i2c10-default {
pinmux {
pins = "gpio86", "gpio87";
function = "qup14";
};
};
qup_i2c11_default: qup-i2c11-default {
pinmux {
pins = "gpio53", "gpio54";
function = "qup15";
};
};
qup_spi0_default: qup-spi0-default {
pinmux {
pins = "gpio34", "gpio35",
"gpio36", "gpio37";
function = "qup00";
};
};
qup_spi0_cs_gpio: qup-spi0-cs-gpio {
pinmux {
pins = "gpio34", "gpio35",
"gpio36";
function = "qup00";
};
pinmux-cs {
pins = "gpio37";
function = "gpio";
};
};
qup_spi1_default: qup-spi1-default {
pinmux {
pins = "gpio0", "gpio1",
"gpio2", "gpio3";
function = "qup01";
};
};
qup_spi1_cs_gpio: qup-spi1-cs-gpio {
pinmux {
pins = "gpio0", "gpio1",
"gpio2";
function = "qup01";
};
pinmux-cs {
pins = "gpio3";
function = "gpio";
};
};
qup_spi3_default: qup-spi3-default {
pinmux {
pins = "gpio38", "gpio39",
"gpio40", "gpio41";
function = "qup03";
};
};
qup_spi3_cs_gpio: qup-spi3-cs-gpio {
pinmux {
pins = "gpio38", "gpio39",
"gpio40";
function = "qup03";
};
pinmux-cs {
pins = "gpio41";
function = "gpio";
};
};
qup_spi5_default: qup-spi5-default {
pinmux {
pins = "gpio25", "gpio26",
"gpio27", "gpio28";
function = "qup05";
};
};
qup_spi5_cs_gpio: qup-spi5-cs-gpio {
pinmux {
pins = "gpio25", "gpio26",
"gpio27";
function = "qup05";
};
pinmux-cs {
pins = "gpio28";
function = "gpio";
};
};
qup_spi6_default: qup-spi6-default {
pinmux {
pins = "gpio59", "gpio60",
"gpio61", "gpio62";
function = "qup10";
};
};
qup_spi6_cs_gpio: qup-spi6-cs-gpio {
pinmux {
pins = "gpio59", "gpio60",
"gpio61";
function = "qup10";
};
pinmux-cs {
pins = "gpio62";
function = "gpio";
};
};
qup_spi8_default: qup-spi8-default {
pinmux {
pins = "gpio42", "gpio43",
"gpio44", "gpio45";
function = "qup12";
};
};
qup_spi8_cs_gpio: qup-spi8-cs-gpio {
pinmux {
pins = "gpio42", "gpio43",
"gpio44";
function = "qup12";
};
pinmux-cs {
pins = "gpio45";
function = "gpio";
};
};
qup_spi10_default: qup-spi10-default {
pinmux {
pins = "gpio86", "gpio87",
"gpio88", "gpio89";
function = "qup14";
};
};
qup_spi10_cs_gpio: qup-spi10-cs-gpio {
pinmux {
pins = "gpio86", "gpio87",
"gpio88";
function = "qup14";
};
pinmux-cs {
pins = "gpio89";
function = "gpio";
};
};
qup_spi11_default: qup-spi11-default {
pinmux {
pins = "gpio53", "gpio54",
"gpio55", "gpio56";
function = "qup15";
};
};
qup_spi11_cs_gpio: qup-spi11-cs-gpio {
pinmux {
pins = "gpio53", "gpio54",
"gpio55";
function = "qup15";
};
pinmux-cs {
pins = "gpio56";
function = "gpio";
};
};
qup_uart0_default: qup-uart0-default {
pinmux {
pins = "gpio34", "gpio35",
"gpio36", "gpio37";
function = "qup00";
};
};
qup_uart1_default: qup-uart1-default {
pinmux {
pins = "gpio0", "gpio1",
"gpio2", "gpio3";
function = "qup01";
};
};
qup_uart2_default: qup-uart2-default {
pinmux {
pins = "gpio15", "gpio16";
function = "qup02_uart";
};
};
qup_uart3_default: qup-uart3-default {
pinmux {
pins = "gpio38", "gpio39",
"gpio40", "gpio41";
function = "qup03";
};
};
qup_uart4_default: qup-uart4-default {
pinmux {
pins = "gpio115", "gpio116";
function = "qup04_uart";
};
};
qup_uart5_default: qup-uart5-default {
pinmux {
pins = "gpio25", "gpio26",
"gpio27", "gpio28";
function = "qup05";
};
};
qup_uart6_default: qup-uart6-default {
pinmux {
pins = "gpio59", "gpio60",
"gpio61", "gpio62";
function = "qup10";
};
};
qup_uart7_default: qup-uart7-default {
pinmux {
pins = "gpio6", "gpio7";
function = "qup11_uart";
};
};
qup_uart8_default: qup-uart8-default {
pinmux {
pins = "gpio44", "gpio45";
function = "qup12";
};
};
qup_uart9_default: qup-uart9-default {
pinmux {
pins = "gpio46", "gpio47";
function = "qup13_uart";
};
};
qup_uart10_default: qup-uart10-default {
pinmux {
pins = "gpio86", "gpio87",
"gpio88", "gpio89";
function = "qup14";
};
};
qup_uart11_default: qup-uart11-default {
pinmux {
pins = "gpio53", "gpio54",
"gpio55", "gpio56";
function = "qup15";
};
};
sec_mi2s_active: sec-mi2s-active {
pinmux {
pins = "gpio49", "gpio50", "gpio51";
function = "mi2s_1";
};
};
pri_mi2s_active: pri-mi2s-active {
pinmux {
pins = "gpio53", "gpio54", "gpio55", "gpio56";
function = "mi2s_0";
};
};
pri_mi2s_mclk_active: pri-mi2s-mclk-active {
pinmux {
pins = "gpio57";
function = "lpass_ext";
};
};
};
remoteproc_mpss: remoteproc@4080000 {
compatible = "qcom,sc7180-mpss-pas";
reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>;
reg-names = "qdsp6", "rmb";
interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready", "handover",
"stop-ack", "shutdown-ack";
clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
<&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
<&gcc GCC_MSS_NAV_AXI_CLK>,
<&gcc GCC_MSS_SNOC_AXI_CLK>,
<&gcc GCC_MSS_MFAB_AXIS_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "bus", "nav", "snoc_axi",
"mnoc_axi", "xo";
power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
<&rpmhpd SC7180_CX>,
<&rpmhpd SC7180_MX>,
<&rpmhpd SC7180_MSS>;
power-domain-names = "load_state", "cx", "mx", "mss";
memory-region = <&mpss_mem>;
qcom,smem-states = <&modem_smp2p_out 0>;
qcom,smem-state-names = "stop";
resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
<&pdc_reset PDC_MODEM_SYNC_RESET>;
reset-names = "mss_restart", "pdc_reset";
qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
qcom,spare-regs = <&tcsr_regs 0xb3e4>;
status = "disabled";
glink-edge {
interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
label = "modem";
qcom,remote-pid = <1>;
mboxes = <&apss_shared 12>;
};
};
gpu: gpu@5000000 {
compatible = "qcom,adreno-618.0", "qcom,adreno";
#stream-id-cells = <16>;
reg = <0 0x05000000 0 0x40000>, <0 0x0509e000 0 0x1000>,
<0 0x05061000 0 0x800>;
reg-names = "kgsl_3d0_reg_memory", "cx_mem", "cx_dbgc";
interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&adreno_smmu 0>;
operating-points-v2 = <&gpu_opp_table>;
qcom,gmu = <&gmu>;
#cooling-cells = <2>;
nvmem-cells = <&gpu_speed_bin>;
nvmem-cell-names = "speed_bin";
interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "gfx-mem";
gpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-825000000 {
opp-hz = /bits/ 64 <825000000>;
opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
opp-peak-kBps = <8532000>;
opp-supported-hw = <0x04>;
};
opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
opp-peak-kBps = <8532000>;
opp-supported-hw = <0x07>;
};
opp-650000000 {
opp-hz = /bits/ 64 <650000000>;
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
opp-peak-kBps = <7216000>;
opp-supported-hw = <0x07>;
};
opp-565000000 {
opp-hz = /bits/ 64 <565000000>;
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
opp-peak-kBps = <5412000>;
opp-supported-hw = <0x07>;
};
opp-430000000 {
opp-hz = /bits/ 64 <430000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
opp-peak-kBps = <5412000>;
opp-supported-hw = <0x07>;
};
opp-355000000 {
opp-hz = /bits/ 64 <355000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
opp-peak-kBps = <3072000>;
opp-supported-hw = <0x07>;
};
opp-267000000 {
opp-hz = /bits/ 64 <267000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
opp-peak-kBps = <3072000>;
opp-supported-hw = <0x07>;
};
opp-180000000 {
opp-hz = /bits/ 64 <180000000>;
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
opp-peak-kBps = <1804000>;
opp-supported-hw = <0x07>;
};
};
};
adreno_smmu: iommu@5040000 {
compatible = "qcom,sc7180-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
reg = <0 0x05040000 0 0x10000>;
#iommu-cells = <1>;
#global-interrupts = <2>;
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
<&gcc GCC_GPU_CFG_AHB_CLK>;
clock-names = "bus", "iface";
power-domains = <&gpucc CX_GDSC>;
};
gmu: gmu@506a000 {
compatible="qcom,adreno-gmu-618.0", "qcom,adreno-gmu";
reg = <0 0x0506a000 0 0x31000>, <0 0x0b290000 0 0x10000>,
<0 0x0b490000 0 0x10000>;
reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hfi", "gmu";
clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
<&gpucc GPU_CC_CXO_CLK>,
<&gcc GCC_DDRSS_GPU_AXI_CLK>,
<&gcc GCC_GPU_MEMNOC_GFX_CLK>;
clock-names = "gmu", "cxo", "axi", "memnoc";
power-domains = <&gpucc CX_GDSC>, <&gpucc GX_GDSC>;
power-domain-names = "cx", "gx";
iommus = <&adreno_smmu 5>;
operating-points-v2 = <&gmu_opp_table>;
gmu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
};
};
};
gpucc: clock-controller@5090000 {
compatible = "qcom,sc7180-gpucc";
reg = <0 0x05090000 0 0x9000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_GPU_GPLL0_CLK_SRC>,
<&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
clock-names = "bi_tcxo",
"gcc_gpu_gpll0_clk_src",
"gcc_gpu_gpll0_div_clk_src";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
stm@6002000 {
compatible = "arm,coresight-stm", "arm,primecell";
reg = <0 0x06002000 0 0x1000>,
<0 0x16280000 0 0x180000>;
reg-names = "stm-base", "stm-stimulus-base";
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
stm_out: endpoint {
remote-endpoint = <&funnel0_in7>;
};
};
};
};
funnel@6041000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x06041000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
funnel0_out: endpoint {
remote-endpoint = <&merge_funnel_in0>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@7 {
reg = <7>;
funnel0_in7: endpoint {
remote-endpoint = <&stm_out>;
};
};
};
};
funnel@6042000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x06042000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
funnel1_out: endpoint {
remote-endpoint = <&merge_funnel_in1>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@4 {
reg = <4>;
funnel1_in4: endpoint {
remote-endpoint = <&apss_merge_funnel_out>;
};
};
};
};
funnel@6045000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x06045000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
merge_funnel_out: endpoint {
remote-endpoint = <&swao_funnel_in>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
merge_funnel_in0: endpoint {
remote-endpoint = <&funnel0_out>;
};
};
port@1 {
reg = <1>;
merge_funnel_in1: endpoint {
remote-endpoint = <&funnel1_out>;
};
};
};
};
replicator@6046000 {
compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
reg = <0 0x06046000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
replicator_out: endpoint {
remote-endpoint = <&etr_in>;
};
};
};
in-ports {
port {
replicator_in: endpoint {
remote-endpoint = <&swao_replicator_out>;
};
};
};
};
etr@6048000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0 0x06048000 0 0x1000>;
iommus = <&apps_smmu 0x04a0 0x20>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,scatter-gather;
in-ports {
port {
etr_in: endpoint {
remote-endpoint = <&replicator_out>;
};
};
};
};
funnel@6b04000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x06b04000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
swao_funnel_out: endpoint {
remote-endpoint = <&etf_in>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@7 {
reg = <7>;
swao_funnel_in: endpoint {
remote-endpoint = <&merge_funnel_out>;
};
};
};
};
etf@6b05000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0 0x06b05000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
etf_out: endpoint {
remote-endpoint = <&swao_replicator_in>;
};
};
};
in-ports {
port {
etf_in: endpoint {
remote-endpoint = <&swao_funnel_out>;
};
};
};
};
replicator@6b06000 {
compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
reg = <0 0x06b06000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
qcom,replicator-loses-context;
out-ports {
port {
swao_replicator_out: endpoint {
remote-endpoint = <&replicator_in>;
};
};
};
in-ports {
port {
swao_replicator_in: endpoint {
remote-endpoint = <&etf_out>;
};
};
};
};
etm@7040000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07040000 0 0x1000>;
cpu = <&CPU0>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
qcom,skip-power-up;
out-ports {
port {
etm0_out: endpoint {
remote-endpoint = <&apss_funnel_in0>;
};
};
};
};
etm@7140000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07140000 0 0x1000>;
cpu = <&CPU1>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
qcom,skip-power-up;
out-ports {
port {
etm1_out: endpoint {
remote-endpoint = <&apss_funnel_in1>;
};
};
};
};
etm@7240000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07240000 0 0x1000>;
cpu = <&CPU2>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
qcom,skip-power-up;
out-ports {
port {
etm2_out: endpoint {
remote-endpoint = <&apss_funnel_in2>;
};
};
};
};
etm@7340000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07340000 0 0x1000>;
cpu = <&CPU3>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
qcom,skip-power-up;
out-ports {
port {
etm3_out: endpoint {
remote-endpoint = <&apss_funnel_in3>;
};
};
};
};
etm@7440000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07440000 0 0x1000>;
cpu = <&CPU4>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
qcom,skip-power-up;
out-ports {
port {
etm4_out: endpoint {
remote-endpoint = <&apss_funnel_in4>;
};
};
};
};
etm@7540000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07540000 0 0x1000>;
cpu = <&CPU5>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
qcom,skip-power-up;
out-ports {
port {
etm5_out: endpoint {
remote-endpoint = <&apss_funnel_in5>;
};
};
};
};
etm@7640000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07640000 0 0x1000>;
cpu = <&CPU6>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
qcom,skip-power-up;
out-ports {
port {
etm6_out: endpoint {
remote-endpoint = <&apss_funnel_in6>;
};
};
};
};
etm@7740000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x07740000 0 0x1000>;
cpu = <&CPU7>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
arm,coresight-loses-context-with-cpu;
qcom,skip-power-up;
out-ports {
port {
etm7_out: endpoint {
remote-endpoint = <&apss_funnel_in7>;
};
};
};
};
funnel@7800000 { /* APSS Funnel */
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x07800000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
apss_funnel_out: endpoint {
remote-endpoint = <&apss_merge_funnel_in>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
apss_funnel_in0: endpoint {
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
apss_funnel_in1: endpoint {
remote-endpoint = <&etm1_out>;
};
};
port@2 {
reg = <2>;
apss_funnel_in2: endpoint {
remote-endpoint = <&etm2_out>;
};
};
port@3 {
reg = <3>;
apss_funnel_in3: endpoint {
remote-endpoint = <&etm3_out>;
};
};
port@4 {
reg = <4>;
apss_funnel_in4: endpoint {
remote-endpoint = <&etm4_out>;
};
};
port@5 {
reg = <5>;
apss_funnel_in5: endpoint {
remote-endpoint = <&etm5_out>;
};
};
port@6 {
reg = <6>;
apss_funnel_in6: endpoint {
remote-endpoint = <&etm6_out>;
};
};
port@7 {
reg = <7>;
apss_funnel_in7: endpoint {
remote-endpoint = <&etm7_out>;
};
};
};
};
funnel@7810000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x07810000 0 0x1000>;
clocks = <&aoss_qmp>;
clock-names = "apb_pclk";
out-ports {
port {
apss_merge_funnel_out: endpoint {
remote-endpoint = <&funnel1_in4>;
};
};
};
in-ports {
port {
apss_merge_funnel_in: endpoint {
remote-endpoint = <&apss_funnel_out>;
};
};
};
};
sdhc_2: sdhci@8804000 {
compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x08804000 0 0x1000>;
iommus = <&apps_smmu 0x80 0>;
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
<&gcc GCC_SDCC2_AHB_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "core", "iface", "xo";
interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
interconnect-names = "sdhc-ddr","cpu-sdhc";
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&sdhc2_opp_table>;
bus-width = <4>;
status = "disabled";
sdhc2_opp_table: sdhc2-opp-table {
compatible = "operating-points-v2";
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_low_svs>;
opp-peak-kBps = <1800000 600000>;
opp-avg-kBps = <100000 0>;
};
opp-202000000 {
opp-hz = /bits/ 64 <202000000>;
required-opps = <&rpmhpd_opp_nom>;
opp-peak-kBps = <5400000 1600000>;
opp-avg-kBps = <200000 0>;
};
};
};
qspi_opp_table: qspi-opp-table {
compatible = "operating-points-v2";
opp-75000000 {
opp-hz = /bits/ 64 <75000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-150000000 {
opp-hz = /bits/ 64 <150000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
qspi: spi@88dc000 {
compatible = "qcom,qspi-v1";
reg = <0 0x088dc000 0 0x600>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
<&gcc GCC_QSPI_CORE_CLK>;
clock-names = "iface", "core";
interconnects = <&gem_noc MASTER_APPSS_PROC 0
&config_noc SLAVE_QSPI_0 0>;
interconnect-names = "qspi-config";
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&qspi_opp_table>;
status = "disabled";
};
usb_1_hsphy: phy@88e3000 {
compatible = "qcom,sc7180-qusb2-phy", "qcom,qusb2-v2-phy";
reg = <0 0x088e3000 0 0x400>;
status = "disabled";
#phy-cells = <0>;
clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "cfg_ahb", "ref";
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
nvmem-cells = <&qusb2p_hstx_trim>;
};
usb_1_qmpphy: phy-wrapper@88e9000 {
compatible = "qcom,sc7180-qmp-usb3-dp-phy";
reg = <0 0x088e9000 0 0x18c>,
<0 0x088e8000 0 0x3c>,
<0 0x088ea000 0 0x18c>;
status = "disabled";
#address-cells = <2>;
#size-cells = <2>;
ranges;
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
<&gcc GCC_USB3_PRIM_CLKREF_CLK>,
<&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
clock-names = "aux", "cfg_ahb", "ref", "com_aux";
resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
<&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
reset-names = "phy", "common";
usb_1_ssphy: usb3-phy@88e9200 {
reg = <0 0x088e9200 0 0x128>,
<0 0x088e9400 0 0x200>,
<0 0x088e9c00 0 0x218>,
<0 0x088e9600 0 0x128>,
<0 0x088e9800 0 0x200>,
<0 0x088e9a00 0 0x18>;
#clock-cells = <0>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb3_phy_pipe_clk_src";
};
dp_phy: dp-phy@88ea200 {
reg = <0 0x088ea200 0 0x200>,
<0 0x088ea400 0 0x200>,
<0 0x088eaa00 0 0x200>,
<0 0x088ea600 0 0x200>,
<0 0x088ea800 0 0x200>;
#clock-cells = <1>;
#phy-cells = <0>;
};
};
dc_noc: interconnect@9160000 {
compatible = "qcom,sc7180-dc-noc";
reg = <0 0x09160000 0 0x03200>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
system-cache-controller@9200000 {
compatible = "qcom,sc7180-llcc";
reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>;
reg-names = "llcc_base", "llcc_broadcast_base";
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
gem_noc: interconnect@9680000 {
compatible = "qcom,sc7180-gem-noc";
reg = <0 0x09680000 0 0x3e200>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
npu_noc: interconnect@9990000 {
compatible = "qcom,sc7180-npu-noc";
reg = <0 0x09990000 0 0x1600>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
usb_1: usb@a6f8800 {
compatible = "qcom,sc7180-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
status = "disabled";
#address-cells = <2>;
#size-cells = <2>;
ranges;
dma-ranges;
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_PRIM_SLEEP_CLK>;
clock-names = "cfg_noc", "core", "iface", "mock_utmi",
"sleep";
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <150000000>;
interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 8 IRQ_TYPE_LEVEL_HIGH>,
<&pdc 9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
power-domains = <&gcc USB30_PRIM_GDSC>;
resets = <&gcc GCC_USB30_PRIM_BCR>;
interconnects = <&aggre2_noc MASTER_USB3 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
interconnect-names = "usb-ddr", "apps-usb";
usb_1_dwc3: dwc3@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xe000>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x540 0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
phy-names = "usb2-phy", "usb3-phy";
maximum-speed = "super-speed";
};
};
venus: video-codec@aa00000 {
compatible = "qcom,sc7180-venus";
reg = <0 0x0aa00000 0 0xff000>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&videocc VENUS_GDSC>,
<&videocc VCODEC0_GDSC>,
<&rpmhpd SC7180_CX>;
power-domain-names = "venus", "vcodec0", "cx";
operating-points-v2 = <&venus_opp_table>;
clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
<&videocc VIDEO_CC_VENUS_AHB_CLK>,
<&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
<&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
<&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
clock-names = "core", "iface", "bus",
"vcodec0_core", "vcodec0_bus";
iommus = <&apps_smmu 0x0c00 0x60>;
memory-region = <&venus_mem>;
interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>;
interconnect-names = "video-mem", "cpu-cfg";
video-decoder {
compatible = "venus-decoder";
};
video-encoder {
compatible = "venus-encoder";
};
venus_opp_table: venus-opp-table {
compatible = "operating-points-v2";
opp-150000000 {
opp-hz = /bits/ 64 <150000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-270000000 {
opp-hz = /bits/ 64 <270000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-340000000 {
opp-hz = /bits/ 64 <340000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-434000000 {
opp-hz = /bits/ 64 <434000000>;
required-opps = <&rpmhpd_opp_nom>;
};
opp-500000097 {
opp-hz = /bits/ 64 <500000097>;
required-opps = <&rpmhpd_opp_turbo>;
};
};
};
videocc: clock-controller@ab00000 {
compatible = "qcom,sc7180-videocc";
reg = <0 0x0ab00000 0 0x10000>;
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "bi_tcxo";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
camnoc_virt: interconnect@ac00000 {
compatible = "qcom,sc7180-camnoc-virt";
reg = <0 0x0ac00000 0 0x1000>;
#interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
camcc: clock-controller@ad00000 {
compatible = "qcom,sc7180-camcc";
reg = <0 0x0ad00000 0 0x10000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_CAMERA_AHB_CLK>,
<&gcc GCC_CAMERA_XO_CLK>;
clock-names = "bi_tcxo", "iface", "xo";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
mdss: mdss@ae00000 {
compatible = "qcom,sc7180-mdss";
reg = <0 0x0ae00000 0 0x1000>;
reg-names = "mdss";
power-domains = <&dispcc MDSS_GDSC>;
clocks = <&gcc GCC_DISP_AHB_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>;
clock-names = "iface", "ahb", "core";
assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
assigned-clock-rates = <300000000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
interconnect-names = "mdp0-mem";
iommus = <&apps_smmu 0x800 0x2>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
status = "disabled";
mdp: mdp@ae01000 {
compatible = "qcom,sc7180-dpu";
reg = <0 0x0ae01000 0 0x8f000>,
<0 0x0aeb0000 0 0x2008>;
reg-names = "mdp", "vbif";
clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_ROT_CLK>,
<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>,
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
clock-names = "bus", "iface", "rot", "lut", "core",
"vsync";
assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
<&dispcc DISP_CC_MDSS_VSYNC_CLK>,
<&dispcc DISP_CC_MDSS_ROT_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>;
assigned-clock-rates = <300000000>,
<19200000>,
<19200000>,
<19200000>;
operating-points-v2 = <&mdp_opp_table>;
power-domains = <&rpmhpd SC7180_CX>;
interrupt-parent = <&mdss>;
interrupts = <0>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dpu_intf1_out: endpoint {
remote-endpoint = <&dsi0_in>;
};
};
port@2 {
reg = <2>;
dpu_intf0_out: endpoint {
remote-endpoint = <&dp_in>;
};
};
};
mdp_opp_table: mdp-opp-table {
compatible = "operating-points-v2";
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-345000000 {
opp-hz = /bits/ 64 <345000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-460000000 {
opp-hz = /bits/ 64 <460000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
};
dsi0: dsi@ae94000 {
compatible = "qcom,mdss-dsi-ctrl";
reg = <0 0x0ae94000 0 0x400>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
interrupts = <4>;
clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
<&dispcc DISP_CC_MDSS_PCLK0_CLK>,
<&dispcc DISP_CC_MDSS_ESC0_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&gcc GCC_DISP_HF_AXI_CLK>;
clock-names = "byte",
"byte_intf",
"pixel",
"core",
"iface",
"bus";
assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>;
operating-points-v2 = <&dsi_opp_table>;
power-domains = <&rpmhpd SC7180_CX>;
phys = <&dsi_phy>;
phy-names = "dsi";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi0_in: endpoint {
remote-endpoint = <&dpu_intf1_out>;
};
};
port@1 {
reg = <1>;
dsi0_out: endpoint {
};
};
};
dsi_opp_table: dsi-opp-table {
compatible = "operating-points-v2";
opp-187500000 {
opp-hz = /bits/ 64 <187500000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-300000000 {
opp-hz = /bits/ 64 <300000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-358000000 {
opp-hz = /bits/ 64 <358000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
};
};
dsi_phy: dsi-phy@ae94400 {
compatible = "qcom,dsi-phy-10nm";
reg = <0 0x0ae94400 0 0x200>,
<0 0x0ae94600 0 0x280>,
<0 0x0ae94a00 0 0x1e0>;
reg-names = "dsi_phy",
"dsi_phy_lane",
"dsi_pll";
#clock-cells = <1>;
#phy-cells = <0>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "ref";
status = "disabled";
};
mdss_dp: displayport-controller@ae90000 {
compatible = "qcom,sc7180-dp";
status = "disabled";
reg = <0 0x0ae90000 0 0x1400>;
interrupt-parent = <&mdss>;
interrupts = <12>;
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
<&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
<&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
clock-names = "core_iface", "core_aux", "ctrl_link",
"ctrl_link_iface", "stream_pixel";
#clock-cells = <1>;
assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
<&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
phys = <&dp_phy>;
phy-names = "dp";
operating-points-v2 = <&dp_opp_table>;
power-domains = <&rpmhpd SC7180_CX>;
#sound-dai-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dp_in: endpoint {
remote-endpoint = <&dpu_intf0_out>;
};
};
port@1 {
reg = <1>;
dp_out: endpoint { };
};
};
dp_opp_table: opp-table {
compatible = "operating-points-v2";
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-270000000 {
opp-hz = /bits/ 64 <270000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-540000000 {
opp-hz = /bits/ 64 <540000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-810000000 {
opp-hz = /bits/ 64 <810000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
};
};
dispcc: clock-controller@af00000 {
compatible = "qcom,sc7180-dispcc";
reg = <0 0x0af00000 0 0x200000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_DISP_GPLL0_CLK_SRC>,
<&dsi_phy 0>,
<&dsi_phy 1>,
<&dp_phy 0>,
<&dp_phy 1>;
clock-names = "bi_tcxo",
"gcc_disp_gpll0_clk_src",
"dsi0_phy_pll_out_byteclk",
"dsi0_phy_pll_out_dsiclk",
"dp_phy_pll_link_clk",
"dp_phy_pll_vco_div_clk";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
};
pdc: interrupt-controller@b220000 {
compatible = "qcom,sc7180-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>;
qcom,pdc-ranges = <0 480 94>, <94 609 31>, <125 63 1>;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupt-controller;
};
pdc_reset: reset-controller@b2e0000 {
compatible = "qcom,sc7180-pdc-global", "qcom,sdm845-pdc-global";
reg = <0 0x0b2e0000 0 0x20000>;
#reset-cells = <1>;
};
tsens0: thermal-sensor@c263000 {
compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
reg = <0 0x0c263000 0 0x1ff>, /* TM */
<0 0x0c222000 0 0x1ff>; /* SROT */
#qcom,sensors = <15>;
interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow","critical";
#thermal-sensor-cells = <1>;
};
tsens1: thermal-sensor@c265000 {
compatible = "qcom,sc7180-tsens","qcom,tsens-v2";
reg = <0 0x0c265000 0 0x1ff>, /* TM */
<0 0x0c223000 0 0x1ff>; /* SROT */
#qcom,sensors = <10>;
interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "uplow","critical";
#thermal-sensor-cells = <1>;
};
aoss_reset: reset-controller@c2a0000 {
compatible = "qcom,sc7180-aoss-cc", "qcom,sdm845-aoss-cc";
reg = <0 0x0c2a0000 0 0x31000>;
#reset-cells = <1>;
};
aoss_qmp: power-controller@c300000 {
compatible = "qcom,sc7180-aoss-qmp";
reg = <0 0x0c300000 0 0x100000>;
interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apss_shared 0>;
#clock-cells = <0>;
#power-domain-cells = <1>;
};
spmi_bus: spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0 0x0c440000 0 0x1100>,
<0 0x0c600000 0 0x2000000>,
<0 0x0e600000 0 0x100000>,
<0 0x0e700000 0 0xa0000>,
<0 0x0c40a000 0 0x26000>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <1>;
#size-cells = <1>;
interrupt-controller;
#interrupt-cells = <4>;
cell-index = <0>;
};
apps_smmu: iommu@15000000 {
compatible = "qcom,sc7180-smmu-500", "arm,mmu-500";
reg = <0 0x15000000 0 0x100000>;
#iommu-cells = <2>;
#global-interrupts = <1>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
};
intc: interrupt-controller@17a00000 {
compatible = "arm,gic-v3";
#address-cells = <2>;
#size-cells = <2>;
ranges;
#interrupt-cells = <3>;
interrupt-controller;
reg = <0 0x17a00000 0 0x10000>, /* GICD */
<0 0x17a60000 0 0x100000>; /* GICR * 8 */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
msi-controller@17a40000 {
compatible = "arm,gic-v3-its";
msi-controller;
#msi-cells = <1>;
reg = <0 0x17a40000 0 0x20000>;
status = "disabled";
};
};
apss_shared: mailbox@17c00000 {
compatible = "qcom,sc7180-apss-shared";
reg = <0 0x17c00000 0 0x10000>;
#mbox-cells = <1>;
};
watchdog@17c10000 {
compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt";
reg = <0 0x17c10000 0 0x1000>;
clocks = <&sleep_clk>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
timer@17c20000{
#address-cells = <2>;
#size-cells = <2>;
ranges;
compatible = "arm,armv7-timer-mem";
reg = <0 0x17c20000 0 0x1000>;
frame@17c21000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
reg = <0 0x17c21000 0 0x1000>,
<0 0x17c22000 0 0x1000>;
};
frame@17c23000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0 0x17c23000 0 0x1000>;
status = "disabled";
};
frame@17c25000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0 0x17c25000 0 0x1000>;
status = "disabled";
};
frame@17c27000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0 0x17c27000 0 0x1000>;
status = "disabled";
};
frame@17c29000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0 0x17c29000 0 0x1000>;
status = "disabled";
};
frame@17c2b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0 0x17c2b000 0 0x1000>;
status = "disabled";
};
frame@17c2d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0 0x17c2d000 0 0x1000>;
status = "disabled";
};
};
apps_rsc: rsc@18200000 {
compatible = "qcom,rpmh-rsc";
reg = <0 0x18200000 0 0x10000>,
<0 0x18210000 0 0x10000>,
<0 0x18220000 0 0x10000>;
reg-names = "drv-0", "drv-1", "drv-2";
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
qcom,tcs-offset = <0xd00>;
qcom,drv-id = <2>;
qcom,tcs-config = <ACTIVE_TCS 2>,
<SLEEP_TCS 3>,
<WAKE_TCS 3>,
<CONTROL_TCS 1>;
rpmhcc: clock-controller {
compatible = "qcom,sc7180-rpmh-clk";
clocks = <&xo_board>;
clock-names = "xo";
#clock-cells = <1>;
};
rpmhpd: power-controller {
compatible = "qcom,sc7180-rpmhpd";
#power-domain-cells = <1>;
operating-points-v2 = <&rpmhpd_opp_table>;
rpmhpd_opp_table: opp-table {
compatible = "operating-points-v2";
rpmhpd_opp_ret: opp1 {
opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
};
rpmhpd_opp_min_svs: opp2 {
opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
};
rpmhpd_opp_low_svs: opp3 {
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
};
rpmhpd_opp_svs: opp4 {
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
};
rpmhpd_opp_svs_l1: opp5 {
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
};
rpmhpd_opp_svs_l2: opp6 {
opp-level = <224>;
};
rpmhpd_opp_nom: opp7 {
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
};
rpmhpd_opp_nom_l1: opp8 {
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
};
rpmhpd_opp_nom_l2: opp9 {
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
};
rpmhpd_opp_turbo: opp10 {
opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
};
rpmhpd_opp_turbo_l1: opp11 {
opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
};
};
};
apps_bcm_voter: bcm_voter {
compatible = "qcom,bcm-voter";
};
};
osm_l3: interconnect@18321000 {
compatible = "qcom,sc7180-osm-l3";
reg = <0 0x18321000 0 0x1400>;
clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
clock-names = "xo", "alternate";
#interconnect-cells = <1>;
};
cpufreq_hw: cpufreq@18323000 {
compatible = "qcom,cpufreq-hw";
reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>;
reg-names = "freq-domain0", "freq-domain1";
clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
clock-names = "xo", "alternate";
#freq-domain-cells = <1>;
};
wifi: wifi@18800000 {
compatible = "qcom,wcn3990-wifi";
reg = <0 0x18800000 0 0x800000>;
reg-names = "membase";
iommus = <&apps_smmu 0xc0 0x1>;
interrupts =
<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
memory-region = <&wlan_mem>;
qcom,msa-fixed-perm;
status = "disabled";
};
lpasscc: clock-controller@62d00000 {
compatible = "qcom,sc7180-lpasscorecc";
reg = <0 0x62d00000 0 0x50000>,
<0 0x62780000 0 0x30000>;
reg-names = "lpass_core_cc", "lpass_audio_cc";
clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "bi_tcxo";
power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
#clock-cells = <1>;
#power-domain-cells = <1>;
};
lpass_cpu: lpass@62d87000 {
compatible = "qcom,sc7180-lpass-cpu";
reg = <0 0x62d87000 0 0x68000>, <0 0x62f00000 0 0x29000>;
reg-names = "lpass-hdmiif", "lpass-lpaif";
iommus = <&apps_smmu 0x1020 0>,
<&apps_smmu 0x1021 0>,
<&apps_smmu 0x1032 0>;
power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
status = "disabled";
clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
<&lpasscc LPASS_AUDIO_CORE_CORE_CLK>,
<&lpasscc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>,
<&lpasscc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>,
<&lpasscc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>,
<&lpasscc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>;
clock-names = "pcnoc-sway-clk", "audio-core",
"mclk0", "pcnoc-mport-clk",
"mi2s-bit-clk0", "mi2s-bit-clk1";
#sound-dai-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "lpass-irq-lpaif", "lpass-irq-hdmi";
};
lpass_hm: clock-controller@63000000 {
compatible = "qcom,sc7180-lpasshm";
reg = <0 0x63000000 0 0x28>;
clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "bi_tcxo";
#clock-cells = <1>;
#power-domain-cells = <1>;
};
};
thermal-zones {
cpu0_thermal: cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens0 1>;
sustainable-power = <768>;
trips {
cpu0_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu0_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu0_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu0_alert0>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu0_alert1>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu1_thermal: cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens0 2>;
sustainable-power = <768>;
trips {
cpu1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu1_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu1_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu1_alert0>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu1_alert1>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu2_thermal: cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens0 3>;
sustainable-power = <768>;
trips {
cpu2_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu2_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu2_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu2_alert0>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu2_alert1>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu3_thermal: cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens0 4>;
sustainable-power = <768>;
trips {
cpu3_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu3_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu3_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu3_alert0>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu3_alert1>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu4_thermal: cpu4-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens0 5>;
sustainable-power = <768>;
trips {
cpu4_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu4_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu4_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu4_alert0>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu4_alert1>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu5_thermal: cpu5-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens0 6>;
sustainable-power = <768>;
trips {
cpu5_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu5_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu5_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu5_alert0>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu5_alert1>;
cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu6_thermal: cpu6-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens0 9>;
sustainable-power = <1202>;
trips {
cpu6_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu6_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu6_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu6_alert0>;
cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu6_alert1>;
cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu7_thermal: cpu7-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens0 10>;
sustainable-power = <1202>;
trips {
cpu7_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu7_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu7_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu7_alert0>;
cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu7_alert1>;
cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu8_thermal: cpu8-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens0 11>;
sustainable-power = <1202>;
trips {
cpu8_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu8_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu8_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu8_alert0>;
cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu8_alert1>;
cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu9_thermal: cpu9-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens0 12>;
sustainable-power = <1202>;
trips {
cpu9_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu9_alert1: trip-point1 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
cpu9_crit: cpu_crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu9_alert0>;
cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu9_alert1>;
cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
aoss0-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens0 0>;
trips {
aoss0_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
aoss0_crit: aoss0_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cpuss0-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens0 7>;
trips {
cpuss0_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
cpuss0_crit: cluster0_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cpuss1-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens0 8>;
trips {
cpuss1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
cpuss1_crit: cluster0_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
gpuss0-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens0 13>;
trips {
gpuss0_alert0: trip-point0 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
gpuss0_crit: gpuss0_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&gpuss0_alert0>;
cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
gpuss1-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens0 14>;
trips {
gpuss1_alert0: trip-point0 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
gpuss1_crit: gpuss1_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&gpuss1_alert0>;
cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
aoss1-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens1 0>;
trips {
aoss1_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
aoss1_crit: aoss1_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cwlan-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens1 1>;
trips {
cwlan_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
cwlan_crit: cwlan_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
audio-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens1 2>;
trips {
audio_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
audio_crit: audio_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
ddr-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens1 3>;
trips {
ddr_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
ddr_crit: ddr_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
q6-hvx-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens1 4>;
trips {
q6_hvx_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
q6_hvx_crit: q6_hvx_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
camera-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens1 5>;
trips {
camera_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
camera_crit: camera_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
mdm-core-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens1 6>;
trips {
mdm_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
mdm_crit: mdm_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
mdm-dsp-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens1 7>;
trips {
mdm_dsp_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
mdm_dsp_crit: mdm_dsp_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
npu-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens1 8>;
trips {
npu_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
npu_crit: npu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
video-thermal {
polling-delay-passive = <250>;
polling-delay = <0>;
thermal-sensors = <&tsens1 9>;
trips {
video_alert0: trip-point0 {
temperature = <90000>;
hysteresis = <2000>;
type = "hot";
};
video_crit: video_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
};
};