| /* SPDX-License-Identifier: GPL-2.0 */ |
| /****************************************************************************** |
| * |
| * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. |
| * |
| ******************************************************************************/ |
| #ifndef _RTW_MP_H_ |
| #define _RTW_MP_H_ |
| |
| #define MAX_MP_XMITBUF_SZ 2048 |
| #define NR_MP_XMITFRAME 8 |
| |
| struct mp_xmit_frame { |
| struct list_head list; |
| |
| struct pkt_attrib attrib; |
| |
| struct sk_buff *pkt; |
| |
| int frame_tag; |
| |
| struct adapter *padapter; |
| |
| uint mem[(MAX_MP_XMITBUF_SZ >> 2)]; |
| }; |
| |
| struct mp_wiparam { |
| u32 bcompleted; |
| u32 act_type; |
| u32 io_offset; |
| u32 io_value; |
| }; |
| |
| struct mp_tx { |
| u8 stop; |
| u32 count, sended; |
| u8 payload; |
| struct pkt_attrib attrib; |
| /* struct tx_desc desc; */ |
| /* u8 resvdtx[7]; */ |
| u8 desc[TXDESC_SIZE]; |
| u8 *pallocated_buf; |
| u8 *buf; |
| u32 buf_size, write_size; |
| void *PktTxThread; |
| }; |
| |
| #define MP_MAX_LINES 1000 |
| #define MP_MAX_LINES_BYTES 256 |
| |
| typedef void (*MPT_WORK_ITEM_HANDLER)(void *Adapter); |
| struct mpt_context { |
| /* Indicate if we have started Mass Production Test. */ |
| bool bMassProdTest; |
| |
| /* Indicate if the driver is unloading or unloaded. */ |
| bool bMptDrvUnload; |
| |
| struct timer_list MPh2c_timeout_timer; |
| /* Event used to sync H2c for BT control */ |
| |
| bool MptH2cRspEvent; |
| bool MptBtC2hEvent; |
| bool bMPh2c_timeout; |
| |
| /* 8190 PCI does not support NDIS_WORK_ITEM. */ |
| /* Work Item for Mass Production Test. */ |
| /* NDIS_WORK_ITEM MptWorkItem; */ |
| /* RT_WORK_ITEM MptWorkItem; */ |
| /* Event used to sync the case unloading driver and MptWorkItem is still in progress. */ |
| /* NDIS_EVENT MptWorkItemEvent; */ |
| /* To protect the following variables. */ |
| /* NDIS_SPIN_LOCK MptWorkItemSpinLock; */ |
| /* Indicate a MptWorkItem is scheduled and not yet finished. */ |
| bool bMptWorkItemInProgress; |
| /* An instance which implements function and context of MptWorkItem. */ |
| MPT_WORK_ITEM_HANDLER CurrMptAct; |
| |
| /* 1 =Start, 0 =Stop from UI. */ |
| u32 MptTestStart; |
| /* _TEST_MODE, defined in MPT_Req2.h */ |
| u32 MptTestItem; |
| /* Variable needed in each implementation of CurrMptAct. */ |
| u32 MptActType; /* Type of action performed in CurrMptAct. */ |
| /* The Offset of IO operation is depend of MptActType. */ |
| u32 MptIoOffset; |
| /* The Value of IO operation is depend of MptActType. */ |
| u32 MptIoValue; |
| /* The RfPath of IO operation is depend of MptActType. */ |
| u32 MptRfPath; |
| |
| enum wireless_mode MptWirelessModeToSw; /* Wireless mode to switch. */ |
| u8 MptChannelToSw; /* Channel to switch. */ |
| u8 MptInitGainToSet; /* Initial gain to set. */ |
| u32 MptBandWidth; /* bandwidth to switch. */ |
| u32 MptRateIndex; /* rate index. */ |
| /* Register value kept for Single Carrier Tx test. */ |
| u8 btMpCckTxPower; |
| /* Register value kept for Single Carrier Tx test. */ |
| u8 btMpOfdmTxPower; |
| /* For MP Tx Power index */ |
| u8 TxPwrLevel[2]; /* rf-A, rf-B */ |
| u32 RegTxPwrLimit; |
| /* Content of RCR Register for Mass Production Test. */ |
| u32 MptRCR; |
| /* true if we only receive packets with specific pattern. */ |
| bool bMptFilterPattern; |
| /* Rx OK count, statistics used in Mass Production Test. */ |
| u32 MptRxOkCnt; |
| /* Rx CRC32 error count, statistics used in Mass Production Test. */ |
| u32 MptRxCrcErrCnt; |
| |
| bool bCckContTx; /* true if we are in CCK Continuous Tx test. */ |
| bool bOfdmContTx; /* true if we are in OFDM Continuous Tx test. */ |
| bool bStartContTx; /* true if we have start Continuous Tx test. */ |
| /* true if we are in Single Carrier Tx test. */ |
| bool bSingleCarrier; |
| /* true if we are in Carrier Suppression Tx Test. */ |
| bool bCarrierSuppression; |
| /* true if we are in Single Tone Tx test. */ |
| bool bSingleTone; |
| |
| /* ACK counter asked by K.Y.. */ |
| bool bMptEnableAckCounter; |
| u32 MptAckCounter; |
| |
| /* SD3 Willis For 8192S to save 1T/2T RF table for ACUT Only fro ACUT delete later ~~~! */ |
| /* s8 BufOfLines[2][MAX_LINES_HWCONFIG_TXT][MAX_BYTES_LINE_HWCONFIG_TXT]; */ |
| /* s8 BufOfLines[2][MP_MAX_LINES][MP_MAX_LINES_BYTES]; */ |
| /* s32 RfReadLine[2]; */ |
| |
| u8 APK_bound[2]; /* for APK path A/path B */ |
| bool bMptIndexEven; |
| |
| u8 backup0xc50; |
| u8 backup0xc58; |
| u8 backup0xc30; |
| u8 backup0x52_RF_A; |
| u8 backup0x52_RF_B; |
| |
| u32 backup0x58_RF_A; |
| u32 backup0x58_RF_B; |
| |
| u8 h2cReqNum; |
| u8 c2hBuf[32]; |
| |
| u8 btInBuf[100]; |
| u32 mptOutLen; |
| u8 mptOutBuf[100]; |
| |
| }; |
| /* endif */ |
| |
| /* E-Fuse */ |
| #define EFUSE_MAP_SIZE 512 |
| |
| #define EFUSE_MAX_SIZE 512 |
| /* end of E-Fuse */ |
| |
| /* define RTPRIV_IOCTL_MP (SIOCIWFIRSTPRIV + 0x17) */ |
| enum { |
| WRITE_REG = 1, |
| READ_REG, |
| WRITE_RF, |
| READ_RF, |
| MP_START, |
| MP_STOP, |
| MP_RATE, |
| MP_CHANNEL, |
| MP_BANDWIDTH, |
| MP_TXPOWER, |
| MP_ANT_TX, |
| MP_ANT_RX, |
| MP_CTX, |
| MP_QUERY, |
| MP_ARX, |
| MP_PSD, |
| MP_PWRTRK, |
| MP_THER, |
| MP_IOCTL, |
| EFUSE_GET, |
| EFUSE_SET, |
| MP_RESET_STATS, |
| MP_DUMP, |
| MP_PHYPARA, |
| MP_SetRFPathSwh, |
| MP_QueryDrvStats, |
| MP_SetBT, |
| CTA_TEST, |
| MP_DISABLE_BT_COEXIST, |
| MP_PwrCtlDM, |
| MP_NULL, |
| MP_GET_TXPOWER_INX, |
| }; |
| |
| struct mp_priv { |
| struct adapter *papdater; |
| |
| /* Testing Flag */ |
| u32 mode;/* 0 for normal type packet, 1 for loopback packet (16bytes TXCMD) */ |
| |
| u32 prev_fw_state; |
| |
| /* OID cmd handler */ |
| struct mp_wiparam workparam; |
| /* u8 act_in_progress; */ |
| |
| /* Tx Section */ |
| u8 TID; |
| u32 tx_pktcount; |
| u32 pktInterval; |
| struct mp_tx tx; |
| |
| /* Rx Section */ |
| u32 rx_bssidpktcount; |
| u32 rx_pktcount; |
| u32 rx_pktcount_filter_out; |
| u32 rx_crcerrpktcount; |
| u32 rx_pktloss; |
| bool rx_bindicatePkt; |
| struct recv_stat rxstat; |
| |
| /* RF/BB relative */ |
| u8 channel; |
| u8 bandwidth; |
| u8 prime_channel_offset; |
| u8 txpoweridx; |
| u8 txpoweridx_b; |
| u8 rateidx; |
| u32 preamble; |
| /* u8 modem; */ |
| u32 CrystalCap; |
| /* u32 curr_crystalcap; */ |
| |
| u16 antenna_tx; |
| u16 antenna_rx; |
| /* u8 curr_rfpath; */ |
| |
| u8 check_mp_pkt; |
| |
| u8 bSetTxPower; |
| /* uint ForcedDataRate; */ |
| u8 mp_dm; |
| u8 mac_filter[ETH_ALEN]; |
| u8 bmac_filter; |
| |
| struct wlan_network mp_network; |
| NDIS_802_11_MAC_ADDRESS network_macaddr; |
| |
| u8 *pallocated_mp_xmitframe_buf; |
| u8 *pmp_xmtframe_buf; |
| struct __queue free_mp_xmitqueue; |
| u32 free_mp_xmitframe_cnt; |
| bool bSetRxBssid; |
| bool bTxBufCkFail; |
| |
| struct mpt_context MptCtx; |
| |
| u8 *TXradomBuffer; |
| }; |
| |
| #define LOWER true |
| #define RAISE false |
| |
| /* Hardware Registers */ |
| #define BB_REG_BASE_ADDR 0x800 |
| |
| #define MAX_RF_PATH_NUMS RF_PATH_MAX |
| |
| extern u8 mpdatarate[NumRates]; |
| |
| #define MAX_TX_PWR_INDEX_N_MODE 64 /* 0x3F */ |
| |
| #define RX_PKT_BROADCAST 1 |
| #define RX_PKT_DEST_ADDR 2 |
| #define RX_PKT_PHY_MATCH 3 |
| |
| #define Mac_OFDM_OK 0x00000000 |
| #define Mac_OFDM_Fail 0x10000000 |
| #define Mac_OFDM_FasleAlarm 0x20000000 |
| #define Mac_CCK_OK 0x30000000 |
| #define Mac_CCK_Fail 0x40000000 |
| #define Mac_CCK_FasleAlarm 0x50000000 |
| #define Mac_HT_OK 0x60000000 |
| #define Mac_HT_Fail 0x70000000 |
| #define Mac_HT_FasleAlarm 0x90000000 |
| #define Mac_DropPacket 0xA0000000 |
| |
| #define REG_RF_BB_GAIN_OFFSET 0x7f |
| #define RF_GAIN_OFFSET_MASK 0xfffff |
| |
| /* */ |
| /* struct mp_xmit_frame *alloc_mp_xmitframe(struct mp_priv *pmp_priv); */ |
| /* int free_mp_xmitframe(struct xmit_priv *pxmitpriv, struct mp_xmit_frame *pmp_xmitframe); */ |
| |
| s32 init_mp_priv(struct adapter *padapter); |
| void free_mp_priv(struct mp_priv *pmp_priv); |
| s32 MPT_InitializeAdapter(struct adapter *padapter, u8 Channel); |
| void MPT_DeInitAdapter(struct adapter *padapter); |
| s32 mp_start_test(struct adapter *padapter); |
| void mp_stop_test(struct adapter *padapter); |
| |
| u32 _read_rfreg(struct adapter *padapter, u8 rfpath, u32 addr, u32 bitmask); |
| void _write_rfreg(struct adapter *padapter, u8 rfpath, u32 addr, u32 bitmask, u32 val); |
| |
| u32 read_macreg(struct adapter *padapter, u32 addr, u32 sz); |
| void write_macreg(struct adapter *padapter, u32 addr, u32 val, u32 sz); |
| u32 read_bbreg(struct adapter *padapter, u32 addr, u32 bitmask); |
| void write_bbreg(struct adapter *padapter, u32 addr, u32 bitmask, u32 val); |
| u32 read_rfreg(struct adapter *padapter, u8 rfpath, u32 addr); |
| void write_rfreg(struct adapter *padapter, u8 rfpath, u32 addr, u32 val); |
| |
| void SetChannel(struct adapter *padapter); |
| void SetBandwidth(struct adapter *padapter); |
| int SetTxPower(struct adapter *padapter); |
| void SetAntennaPathPower(struct adapter *padapter); |
| void SetDataRate(struct adapter *padapter); |
| |
| void SetAntenna(struct adapter *padapter); |
| |
| s32 SetThermalMeter(struct adapter *padapter, u8 target_ther); |
| void GetThermalMeter(struct adapter *padapter, u8 *value); |
| |
| void SetContinuousTx(struct adapter *padapter, u8 bStart); |
| void SetSingleCarrierTx(struct adapter *padapter, u8 bStart); |
| void SetSingleToneTx(struct adapter *padapter, u8 bStart); |
| void SetCarrierSuppressionTx(struct adapter *padapter, u8 bStart); |
| void PhySetTxPowerLevel(struct adapter *padapter); |
| |
| void fill_txdesc_for_mp(struct adapter *padapter, u8 *ptxdesc); |
| void SetPacketTx(struct adapter *padapter); |
| void SetPacketRx(struct adapter *padapter, u8 bStartRx); |
| |
| void ResetPhyRxPktCount(struct adapter *padapter); |
| u32 GetPhyRxPktReceived(struct adapter *padapter); |
| u32 GetPhyRxPktCRC32Error(struct adapter *padapter); |
| |
| s32 SetPowerTracking(struct adapter *padapter, u8 enable); |
| void GetPowerTracking(struct adapter *padapter, u8 *enable); |
| |
| u32 mp_query_psd(struct adapter *padapter, u8 *data); |
| |
| void Hal_SetAntenna(struct adapter *padapter); |
| void Hal_SetBandwidth(struct adapter *padapter); |
| |
| void Hal_SetTxPower(struct adapter *padapter); |
| void Hal_SetCarrierSuppressionTx(struct adapter *padapter, u8 bStart); |
| void Hal_SetSingleToneTx(struct adapter *padapter, u8 bStart); |
| void Hal_SetSingleCarrierTx(struct adapter *padapter, u8 bStart); |
| void Hal_SetContinuousTx(struct adapter *padapter, u8 bStart); |
| |
| void Hal_SetDataRate(struct adapter *padapter); |
| void Hal_SetChannel(struct adapter *padapter); |
| void Hal_SetAntennaPathPower(struct adapter *padapter); |
| s32 Hal_SetThermalMeter(struct adapter *padapter, u8 target_ther); |
| s32 Hal_SetPowerTracking(struct adapter *padapter, u8 enable); |
| void Hal_GetPowerTracking(struct adapter *padapter, u8 *enable); |
| void Hal_GetThermalMeter(struct adapter *padapter, u8 *value); |
| void Hal_mpt_SwitchRfSetting(struct adapter *padapter); |
| void Hal_MPT_CCKTxPowerAdjust(struct adapter *Adapter, bool bInCH14); |
| void Hal_MPT_CCKTxPowerAdjustbyIndex(struct adapter *padapter, bool beven); |
| void Hal_SetCCKTxPower(struct adapter *padapter, u8 *TxPower); |
| void Hal_SetOFDMTxPower(struct adapter *padapter, u8 *TxPower); |
| void Hal_TriggerRFThermalMeter(struct adapter *padapter); |
| u8 Hal_ReadRFThermalMeter(struct adapter *padapter); |
| void Hal_SetCCKContinuousTx(struct adapter *padapter, u8 bStart); |
| void Hal_SetOFDMContinuousTx(struct adapter *padapter, u8 bStart); |
| void Hal_ProSetCrystalCap(struct adapter *padapter, u32 CrystalCapVal); |
| void MP_PHY_SetRFPathSwitch(struct adapter *padapter, bool bMain); |
| u32 mpt_ProQueryCalTxPower(struct adapter *padapter, u8 RfPath); |
| void MPT_PwrCtlDM(struct adapter *padapter, u32 bstart); |
| u8 MptToMgntRate(u32 MptRateIdx); |
| |
| #endif /* _RTW_MP_H_ */ |
