| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Ram backed block device driver. |
| * |
| * Copyright (C) 2007 Nick Piggin |
| * Copyright (C) 2007 Novell Inc. |
| * |
| * Parts derived from drivers/block/rd.c, and drivers/block/loop.c, copyright |
| * of their respective owners. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/initrd.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/major.h> |
| #include <linux/blkdev.h> |
| #include <linux/bio.h> |
| #include <linux/highmem.h> |
| #include <linux/mutex.h> |
| #include <linux/pagemap.h> |
| #include <linux/xarray.h> |
| #include <linux/fs.h> |
| #include <linux/slab.h> |
| #include <linux/backing-dev.h> |
| #include <linux/debugfs.h> |
| |
| #include <linux/uaccess.h> |
| |
| /* |
| * Each block ramdisk device has a xarray brd_pages of pages that stores |
| * the pages containing the block device's contents. |
| */ |
| struct brd_device { |
| int brd_number; |
| struct gendisk *brd_disk; |
| struct list_head brd_list; |
| |
| /* |
| * Backing store of pages. This is the contents of the block device. |
| */ |
| struct xarray brd_pages; |
| u64 brd_nr_pages; |
| }; |
| |
| /* |
| * Look up and return a brd's page for a given sector. |
| */ |
| static struct page *brd_lookup_page(struct brd_device *brd, sector_t sector) |
| { |
| return xa_load(&brd->brd_pages, sector >> PAGE_SECTORS_SHIFT); |
| } |
| |
| /* |
| * Insert a new page for a given sector, if one does not already exist. |
| */ |
| static int brd_insert_page(struct brd_device *brd, sector_t sector, gfp_t gfp) |
| { |
| pgoff_t idx = sector >> PAGE_SECTORS_SHIFT; |
| struct page *page; |
| int ret = 0; |
| |
| page = brd_lookup_page(brd, sector); |
| if (page) |
| return 0; |
| |
| page = alloc_page(gfp | __GFP_ZERO | __GFP_HIGHMEM); |
| if (!page) |
| return -ENOMEM; |
| |
| xa_lock(&brd->brd_pages); |
| ret = __xa_insert(&brd->brd_pages, idx, page, gfp); |
| if (!ret) |
| brd->brd_nr_pages++; |
| xa_unlock(&brd->brd_pages); |
| |
| if (ret < 0) { |
| __free_page(page); |
| if (ret == -EBUSY) |
| ret = 0; |
| } |
| return ret; |
| } |
| |
| /* |
| * Free all backing store pages and xarray. This must only be called when |
| * there are no other users of the device. |
| */ |
| static void brd_free_pages(struct brd_device *brd) |
| { |
| struct page *page; |
| pgoff_t idx; |
| |
| xa_for_each(&brd->brd_pages, idx, page) { |
| __free_page(page); |
| cond_resched(); |
| } |
| |
| xa_destroy(&brd->brd_pages); |
| } |
| |
| /* |
| * copy_to_brd_setup must be called before copy_to_brd. It may sleep. |
| */ |
| static int copy_to_brd_setup(struct brd_device *brd, sector_t sector, size_t n, |
| gfp_t gfp) |
| { |
| unsigned int offset = (sector & (PAGE_SECTORS-1)) << SECTOR_SHIFT; |
| size_t copy; |
| int ret; |
| |
| copy = min_t(size_t, n, PAGE_SIZE - offset); |
| ret = brd_insert_page(brd, sector, gfp); |
| if (ret) |
| return ret; |
| if (copy < n) { |
| sector += copy >> SECTOR_SHIFT; |
| ret = brd_insert_page(brd, sector, gfp); |
| } |
| return ret; |
| } |
| |
| /* |
| * Copy n bytes from src to the brd starting at sector. Does not sleep. |
| */ |
| static void copy_to_brd(struct brd_device *brd, const void *src, |
| sector_t sector, size_t n) |
| { |
| struct page *page; |
| void *dst; |
| unsigned int offset = (sector & (PAGE_SECTORS-1)) << SECTOR_SHIFT; |
| size_t copy; |
| |
| copy = min_t(size_t, n, PAGE_SIZE - offset); |
| page = brd_lookup_page(brd, sector); |
| BUG_ON(!page); |
| |
| dst = kmap_atomic(page); |
| memcpy(dst + offset, src, copy); |
| kunmap_atomic(dst); |
| |
| if (copy < n) { |
| src += copy; |
| sector += copy >> SECTOR_SHIFT; |
| copy = n - copy; |
| page = brd_lookup_page(brd, sector); |
| BUG_ON(!page); |
| |
| dst = kmap_atomic(page); |
| memcpy(dst, src, copy); |
| kunmap_atomic(dst); |
| } |
| } |
| |
| /* |
| * Copy n bytes to dst from the brd starting at sector. Does not sleep. |
| */ |
| static void copy_from_brd(void *dst, struct brd_device *brd, |
| sector_t sector, size_t n) |
| { |
| struct page *page; |
| void *src; |
| unsigned int offset = (sector & (PAGE_SECTORS-1)) << SECTOR_SHIFT; |
| size_t copy; |
| |
| copy = min_t(size_t, n, PAGE_SIZE - offset); |
| page = brd_lookup_page(brd, sector); |
| if (page) { |
| src = kmap_atomic(page); |
| memcpy(dst, src + offset, copy); |
| kunmap_atomic(src); |
| } else |
| memset(dst, 0, copy); |
| |
| if (copy < n) { |
| dst += copy; |
| sector += copy >> SECTOR_SHIFT; |
| copy = n - copy; |
| page = brd_lookup_page(brd, sector); |
| if (page) { |
| src = kmap_atomic(page); |
| memcpy(dst, src, copy); |
| kunmap_atomic(src); |
| } else |
| memset(dst, 0, copy); |
| } |
| } |
| |
| /* |
| * Process a single bvec of a bio. |
| */ |
| static int brd_do_bvec(struct brd_device *brd, struct page *page, |
| unsigned int len, unsigned int off, blk_opf_t opf, |
| sector_t sector) |
| { |
| void *mem; |
| int err = 0; |
| |
| if (op_is_write(opf)) { |
| /* |
| * Must use NOIO because we don't want to recurse back into the |
| * block or filesystem layers from page reclaim. |
| */ |
| gfp_t gfp = opf & REQ_NOWAIT ? GFP_NOWAIT : GFP_NOIO; |
| |
| err = copy_to_brd_setup(brd, sector, len, gfp); |
| if (err) |
| goto out; |
| } |
| |
| mem = kmap_atomic(page); |
| if (!op_is_write(opf)) { |
| copy_from_brd(mem + off, brd, sector, len); |
| flush_dcache_page(page); |
| } else { |
| flush_dcache_page(page); |
| copy_to_brd(brd, mem + off, sector, len); |
| } |
| kunmap_atomic(mem); |
| |
| out: |
| return err; |
| } |
| |
| static void brd_do_discard(struct brd_device *brd, sector_t sector, u32 size) |
| { |
| sector_t aligned_sector = (sector + PAGE_SECTORS) & ~PAGE_SECTORS; |
| struct page *page; |
| |
| size -= (aligned_sector - sector) * SECTOR_SIZE; |
| xa_lock(&brd->brd_pages); |
| while (size >= PAGE_SIZE && aligned_sector < rd_size * 2) { |
| page = __xa_erase(&brd->brd_pages, aligned_sector >> PAGE_SECTORS_SHIFT); |
| if (page) |
| __free_page(page); |
| aligned_sector += PAGE_SECTORS; |
| size -= PAGE_SIZE; |
| } |
| xa_unlock(&brd->brd_pages); |
| } |
| |
| static void brd_submit_bio(struct bio *bio) |
| { |
| struct brd_device *brd = bio->bi_bdev->bd_disk->private_data; |
| sector_t sector = bio->bi_iter.bi_sector; |
| struct bio_vec bvec; |
| struct bvec_iter iter; |
| |
| if (unlikely(op_is_discard(bio->bi_opf))) { |
| brd_do_discard(brd, sector, bio->bi_iter.bi_size); |
| bio_endio(bio); |
| return; |
| } |
| |
| bio_for_each_segment(bvec, bio, iter) { |
| unsigned int len = bvec.bv_len; |
| int err; |
| |
| /* Don't support un-aligned buffer */ |
| WARN_ON_ONCE((bvec.bv_offset & (SECTOR_SIZE - 1)) || |
| (len & (SECTOR_SIZE - 1))); |
| |
| err = brd_do_bvec(brd, bvec.bv_page, len, bvec.bv_offset, |
| bio->bi_opf, sector); |
| if (err) { |
| if (err == -ENOMEM && bio->bi_opf & REQ_NOWAIT) { |
| bio_wouldblock_error(bio); |
| return; |
| } |
| bio_io_error(bio); |
| return; |
| } |
| sector += len >> SECTOR_SHIFT; |
| } |
| |
| bio_endio(bio); |
| } |
| |
| static const struct block_device_operations brd_fops = { |
| .owner = THIS_MODULE, |
| .submit_bio = brd_submit_bio, |
| }; |
| |
| /* |
| * And now the modules code and kernel interface. |
| */ |
| static int rd_nr = CONFIG_BLK_DEV_RAM_COUNT; |
| module_param(rd_nr, int, 0444); |
| MODULE_PARM_DESC(rd_nr, "Maximum number of brd devices"); |
| |
| unsigned long rd_size = CONFIG_BLK_DEV_RAM_SIZE; |
| module_param(rd_size, ulong, 0444); |
| MODULE_PARM_DESC(rd_size, "Size of each RAM disk in kbytes."); |
| |
| static int max_part = 1; |
| module_param(max_part, int, 0444); |
| MODULE_PARM_DESC(max_part, "Num Minors to reserve between devices"); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS_BLOCKDEV_MAJOR(RAMDISK_MAJOR); |
| MODULE_ALIAS("rd"); |
| |
| #ifndef MODULE |
| /* Legacy boot options - nonmodular */ |
| static int __init ramdisk_size(char *str) |
| { |
| rd_size = simple_strtol(str, NULL, 0); |
| return 1; |
| } |
| __setup("ramdisk_size=", ramdisk_size); |
| #endif |
| |
| /* |
| * The device scheme is derived from loop.c. Keep them in synch where possible |
| * (should share code eventually). |
| */ |
| static LIST_HEAD(brd_devices); |
| static struct dentry *brd_debugfs_dir; |
| |
| static int brd_alloc(int i) |
| { |
| struct brd_device *brd; |
| struct gendisk *disk; |
| char buf[DISK_NAME_LEN]; |
| int err = -ENOMEM; |
| struct queue_limits lim = { |
| /* |
| * This is so fdisk will align partitions on 4k, because of |
| * direct_access API needing 4k alignment, returning a PFN |
| * (This is only a problem on very small devices <= 4M, |
| * otherwise fdisk will align on 1M. Regardless this call |
| * is harmless) |
| */ |
| .physical_block_size = PAGE_SIZE, |
| .max_hw_discard_sectors = UINT_MAX, |
| .max_discard_segments = 1, |
| .discard_granularity = PAGE_SIZE, |
| }; |
| |
| list_for_each_entry(brd, &brd_devices, brd_list) |
| if (brd->brd_number == i) |
| return -EEXIST; |
| brd = kzalloc(sizeof(*brd), GFP_KERNEL); |
| if (!brd) |
| return -ENOMEM; |
| brd->brd_number = i; |
| list_add_tail(&brd->brd_list, &brd_devices); |
| |
| xa_init(&brd->brd_pages); |
| |
| snprintf(buf, DISK_NAME_LEN, "ram%d", i); |
| if (!IS_ERR_OR_NULL(brd_debugfs_dir)) |
| debugfs_create_u64(buf, 0444, brd_debugfs_dir, |
| &brd->brd_nr_pages); |
| |
| disk = brd->brd_disk = blk_alloc_disk(&lim, NUMA_NO_NODE); |
| if (IS_ERR(disk)) { |
| err = PTR_ERR(disk); |
| goto out_free_dev; |
| } |
| disk->major = RAMDISK_MAJOR; |
| disk->first_minor = i * max_part; |
| disk->minors = max_part; |
| disk->fops = &brd_fops; |
| disk->private_data = brd; |
| strscpy(disk->disk_name, buf, DISK_NAME_LEN); |
| set_capacity(disk, rd_size * 2); |
| |
| /* Tell the block layer that this is not a rotational device */ |
| blk_queue_flag_set(QUEUE_FLAG_NONROT, disk->queue); |
| blk_queue_flag_set(QUEUE_FLAG_SYNCHRONOUS, disk->queue); |
| blk_queue_flag_set(QUEUE_FLAG_NOWAIT, disk->queue); |
| err = add_disk(disk); |
| if (err) |
| goto out_cleanup_disk; |
| |
| return 0; |
| |
| out_cleanup_disk: |
| put_disk(disk); |
| out_free_dev: |
| list_del(&brd->brd_list); |
| kfree(brd); |
| return err; |
| } |
| |
| static void brd_probe(dev_t dev) |
| { |
| brd_alloc(MINOR(dev) / max_part); |
| } |
| |
| static void brd_cleanup(void) |
| { |
| struct brd_device *brd, *next; |
| |
| debugfs_remove_recursive(brd_debugfs_dir); |
| |
| list_for_each_entry_safe(brd, next, &brd_devices, brd_list) { |
| del_gendisk(brd->brd_disk); |
| put_disk(brd->brd_disk); |
| brd_free_pages(brd); |
| list_del(&brd->brd_list); |
| kfree(brd); |
| } |
| } |
| |
| static inline void brd_check_and_reset_par(void) |
| { |
| if (unlikely(!max_part)) |
| max_part = 1; |
| |
| /* |
| * make sure 'max_part' can be divided exactly by (1U << MINORBITS), |
| * otherwise, it is possiable to get same dev_t when adding partitions. |
| */ |
| if ((1U << MINORBITS) % max_part != 0) |
| max_part = 1UL << fls(max_part); |
| |
| if (max_part > DISK_MAX_PARTS) { |
| pr_info("brd: max_part can't be larger than %d, reset max_part = %d.\n", |
| DISK_MAX_PARTS, DISK_MAX_PARTS); |
| max_part = DISK_MAX_PARTS; |
| } |
| } |
| |
| static int __init brd_init(void) |
| { |
| int err, i; |
| |
| brd_check_and_reset_par(); |
| |
| brd_debugfs_dir = debugfs_create_dir("ramdisk_pages", NULL); |
| |
| for (i = 0; i < rd_nr; i++) { |
| err = brd_alloc(i); |
| if (err) |
| goto out_free; |
| } |
| |
| /* |
| * brd module now has a feature to instantiate underlying device |
| * structure on-demand, provided that there is an access dev node. |
| * |
| * (1) if rd_nr is specified, create that many upfront. else |
| * it defaults to CONFIG_BLK_DEV_RAM_COUNT |
| * (2) User can further extend brd devices by create dev node themselves |
| * and have kernel automatically instantiate actual device |
| * on-demand. Example: |
| * mknod /path/devnod_name b 1 X # 1 is the rd major |
| * fdisk -l /path/devnod_name |
| * If (X / max_part) was not already created it will be created |
| * dynamically. |
| */ |
| |
| if (__register_blkdev(RAMDISK_MAJOR, "ramdisk", brd_probe)) { |
| err = -EIO; |
| goto out_free; |
| } |
| |
| pr_info("brd: module loaded\n"); |
| return 0; |
| |
| out_free: |
| brd_cleanup(); |
| |
| pr_info("brd: module NOT loaded !!!\n"); |
| return err; |
| } |
| |
| static void __exit brd_exit(void) |
| { |
| |
| unregister_blkdev(RAMDISK_MAJOR, "ramdisk"); |
| brd_cleanup(); |
| |
| pr_info("brd: module unloaded\n"); |
| } |
| |
| module_init(brd_init); |
| module_exit(brd_exit); |
| |