// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Google CoachZ board device tree source
 *
 * Copyright 2020 Google LLC.
 */

#include "sc7180-trogdor.dtsi"
#include "sc7180-trogdor-ti-sn65dsi86.dtsi"

/* Deleted nodes from sc7180-trogdor.dtsi */

/delete-node/ &pp3300_codec;

/ {
	/* BOARD-SPECIFIC TOP LEVEL NODES */

	adau7002: audio-codec-1 {
		compatible = "adi,adau7002";
		IOVDD-supply = <&pp1800_l15a>;
		wakeup-delay-ms = <80>;
		#sound-dai-cells = <0>;
	};

	thermal-zones {
		skin_temp_thermal: skin-temp-thermal {
			polling-delay-passive = <250>;
			polling-delay = <0>;

			thermal-sensors = <&pm6150_adc_tm 1>;
			sustainable-power = <965>;

			trips {
				skin_temp_alert0: trip-point0 {
					temperature = <42000>;
					hysteresis = <1000>;
					type = "passive";
				};

				skin_temp_alert1: trip-point1 {
					temperature = <45000>;
					hysteresis = <1000>;
					type = "passive";
				};

				skin-temp-crit {
					temperature = <60000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&skin_temp_alert0>;
					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};

				map1 {
					trip = <&skin_temp_alert1>;
					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};
	};
};

&ap_spi_fp {
	status = "okay";
};

&backlight {
	pwms = <&cros_ec_pwm 0>;
};

&camcc {
	status = "okay";
};

&cros_ec {
	keyboard-controller {
		compatible = "google,cros-ec-keyb-switches";
	};

	cros_ec_proximity: proximity {
		compatible = "google,cros-ec-mkbp-proximity";
		label = "proximity-wifi";
	};
};

ap_ts_pen_1v8: &i2c4 {
	status = "okay";
	clock-frequency = <400000>;

	ap_ts: touchscreen@5d {
		compatible = "goodix,gt7375p";
		reg = <0x5d>;
		pinctrl-names = "default";
		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;

		interrupt-parent = <&tlmm>;
		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;

		panel = <&panel>;
		reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;

		vdd-supply = <&pp3300_ts>;
	};
};

&i2c9 {
	status = "disabled";
};

&panel {
	compatible = "boe,nv110wtm-n61";
};

&pm6150_adc {
	channel@4e {
		reg = <ADC5_AMUX_THM2_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		label = "skin_therm";
	};
};

&pm6150_adc_tm {
	status = "okay";

	skin-temp-thermistor@1 {
		reg = <1>;
		io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time-us = <200>;
	};
};

&pp1800_uf_cam {
	status = "okay";
};

&pp1800_wf_cam {
	status = "okay";
};

&pp2800_uf_cam {
	status = "okay";
};

&pp2800_wf_cam {
	status = "okay";
};

&pp3300_dx_edp {
	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
};

&sdhc_2 {
	status = "okay";
};

&sn65dsi86_out {
	data-lanes = <0 1 2 3>;
};

&sound {
	compatible = "google,sc7180-coachz";
	model = "sc7180-adau7002-max98357a";
	audio-routing = "PDM_DAT", "DMIC";

	pinctrl-names = "default";
	pinctrl-0 = <&dmic_clk_en>;
};

&sound_multimedia0_codec {
	sound-dai = <&adau7002>;
};

/* PINCTRL - modifications to sc7180-trogdor.dtsi */

&en_pp3300_dx_edp {
	pins = "gpio67";
};

&ts_reset_l {
	/*
	 * We want reset state by default and it will be up to the
	 * driver to disable this when it's ready.
	 */
	output-low;
};

/* PINCTRL - board-specific pinctrl */

&tlmm {
	gpio-line-names = "HUB_RST_L",
			  "AP_RAM_ID0",
			  "AP_SKU_ID2",
			  "AP_RAM_ID1",
			  "FP_TO_AP_IRQ_L",
			  "AP_RAM_ID2",
			  "UF_CAM_EN",
			  "WF_CAM_EN",
			  "TS_RESET_L",
			  "TS_INT_L",
			  "FPMCU_BOOT0",
			  "EDP_BRIJ_IRQ",
			  "AP_EDP_BKLTEN",
			  "UF_CAM_MCLK",
			  "WF_CAM_CLK",
			  "EDP_BRIJ_I2C_SDA",
			  "EDP_BRIJ_I2C_SCL",
			  "UF_CAM_SDA",
			  "UF_CAM_SCL",
			  "WF_CAM_SDA",
			  "WF_CAM_SCL",
			  "WLC_IRQ",
			  "FP_RST_L",
			  "AMP_EN",
			  "WLC_NRST",
			  "AP_SAR_SENSOR_SDA",
			  "AP_SAR_SENSOR_SCL",
			  "",
			  "",
			  "WF_CAM_RST_L",
			  "UF_CAM_RST_L",
			  "AP_BRD_ID2",
			  "BRIJ_SUSPEND",
			  "AP_BRD_ID0",
			  "AP_H1_SPI_MISO",
			  "AP_H1_SPI_MOSI",
			  "AP_H1_SPI_CLK",
			  "AP_H1_SPI_CS_L",
			  "",
			  "",
			  "",
			  "",
			  "H1_AP_INT_ODL",
			  "",
			  "UART_AP_TX_DBG_RX",
			  "UART_DBG_TX_AP_RX",
			  "",
			  "",
			  "FORCED_USB_BOOT",
			  "AMP_BCLK",
			  "AMP_LRCLK",
			  "AMP_DIN",
			  "",
			  "HP_BCLK",
			  "HP_LRCLK",
			  "HP_DOUT",
			  "HP_DIN",
			  "HP_MCLK",
			  "AP_SKU_ID0",
			  "AP_EC_SPI_MISO",
			  "AP_EC_SPI_MOSI",
			  "AP_EC_SPI_CLK",
			  "AP_EC_SPI_CS_L",
			  "AP_SPI_CLK",
			  "AP_SPI_MOSI",
			  "AP_SPI_MISO",
			  /*
			   * AP_FLASH_WP_L is crossystem ABI. Schematics
			   * call it BIOS_FLASH_WP_L.
			   */
			  "AP_FLASH_WP_L",
			  "EN_PP3300_DX_EDP",
			  "AP_SPI_CS0_L",
			  "SD_CD_ODL",
			  "",
			  "",
			  "",
			  "",
			  "EN_FP_RAILS",
			  "UIM2_DATA",
			  "UIM2_CLK",
			  "UIM2_RST",
			  "UIM2_PRESENT_L",
			  "UIM1_DATA",
			  "UIM1_CLK",
			  "UIM1_RST",
			  "",
			  "",
			  "HUB_EN",
			  "",
			  "AP_SPI_FP_MISO",
			  "AP_SPI_FP_MOSI",
			  "AP_SPI_FP_CLK",
			  "AP_SPI_FP_CS_L",
			  "AP_SKU_ID1",
			  "AP_RST_REQ",
			  "",
			  "AP_BRD_ID1",
			  "AP_EC_INT_L",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "EDP_BRIJ_EN",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "",
			  "AP_TS_PEN_I2C_SDA",
			  "AP_TS_PEN_I2C_SCL",
			  "DP_HOT_PLUG_DET",
			  "EC_IN_RW_ODL";

	dmic_clk_en: dmic-clk-en-state {
		pins = "gpio83";
		function = "gpio";
		drive-strength = <8>;
		bias-pull-up;
	};
};