Merge tag 'imx-dt-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Merge "ARM: imx: device tree changes for 3.18" from Shawn Guo:
The i.MX device tree changes for 3.18:
- Device tree support for i.MX ADS and Armadeus APF9328 boards
- Enable thermal sensor support for i.MX6SL
- Add LCD support for i.MX6SL EVK board
- Fix display duplicate name for a bunch of board dts files
- Configure imx6qdl-sabresd board pins locally to remove the dependency
on bootloader
- A set of imx28-tx28 board dts updates from Lothar
- Add pci config space as platform resource
- Enable devices RTC, I2C and HDMI for nitrogen6x board
- Split HummingBoard DT to support s/dl and d/q
- mSATA and IR input support for HummingBoard
- Add SSI baud clock for i.MX6 device trees
- Add USB support for vf610-colibri and vf610-twr boards
- A set of cleanup and updates on Gateworks boards
* tag 'imx-dt-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (86 commits)
ARM: dts: imx6: make gpt per clock can be from OSC
ARM: dts: imx: ventana: add canbus support for GW52xx
ARM: dts: imx: ventana: cleanup pinctrl groups
ARM: dts: imx: ventana: configure padconf for all pins
ARM: dts: imx: ventana: use gpio constants
ARM: dts: imx: ventana: remove unused aliases
ARM: dts: imx: ventana: remove unsupported dt nodes
ARM: dts: imx28-tx28: add alias for CAN XCVR regulator
ARM: dts: imx28-tx28: add spi-gpio as alternative for spi-mxs
ARM: dts: imx28-tx28: use GPIO flags
ARM: dts: imx28-tx28: remove spidev labels and add third instance of spidev
ARM: dts: imx6sl: add baud clock and clock-names for ssi
ARM: dts: imx6qdl: add baud clock and clock-names for ssi
ARM: dts: imx6qdl-sabresd: Configure the pins locally
ARM: dts: imx28-m28evk: Fix display duplicate name warning
ARM: dts: imx28-tx28: Fix display duplicate name warning
ARM: dts: imx28-m28cu: Fix display duplicate name warning
ARM: dts: imx28-cfa100: Fix display duplicate name warning
ARM: dts: imx28-apf28dev: Fix display duplicate name warning
ARM: dts: imx28-apx4devkit: Fix display duplicate name warning
...
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt
new file mode 100644
index 0000000..d0ce01d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt
@@ -0,0 +1,15 @@
+Altera SOCFPGA SDRAM Error Detection & Correction [EDAC]
+The EDAC accesses a range of registers in the SDRAM controller.
+
+Required properties:
+- compatible : should contain "altr,sdram-edac";
+- altr,sdr-syscon : phandle of the sdr module
+- interrupts : Should contain the SDRAM ECC IRQ in the
+ appropriate format for the IRQ controller.
+
+Example:
+ sdramedac {
+ compatible = "altr,sdram-edac";
+ altr,sdr-syscon = <&sdr>;
+ interrupts = <0 39 4>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
index d6ac71f..fa25226 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -6,3 +6,9 @@
compatible: must contain "mediatek,mt6589"
+
+Supported boards:
+
+- bq Aquaris5 smart phone:
+ Required root node properties:
+ - compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 0edc903..ddd9bcd 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -85,6 +85,18 @@
- DRA722
compatible = "ti,dra722", "ti,dra72", "ti,dra7"
+- AM5728
+ compatible = "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
+
+- AM5726
+ compatible = "ti,am5726", "ti,dra742", "ti,dra74", "ti,dra7"
+
+- AM5718
+ compatible = "ti,am5718", "ti,dra722", "ti,dra72", "ti,dra7"
+
+- AM5716
+ compatible = "ti,am5716", "ti,dra722", "ti,dra72", "ti,dra7"
+
- AM4372
compatible = "ti,am4372", "ti,am43"
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
new file mode 100644
index 0000000..5d1c5c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -0,0 +1,71 @@
+Renesas SH-Mobile, R-Mobile, and R-Car Platform Device Tree Bindings
+--------------------------------------------------------------------
+
+SoCs:
+
+ - Emma Mobile EV2
+ compatible = "renesas,emev2"
+ - RZ/A1H (R7S72100)
+ compatible = "renesas,r7s72100"
+ - SH-Mobile AP4 (R8A73720/SH7372)
+ compatible = "renesas,sh7372"
+ - SH-Mobile AG5 (R8A73A00/SH73A0)
+ compatible = "renesas,sh73a0"
+ - R-Mobile APE6 (R8A73A40)
+ compatible = "renesas,r8a73a4"
+ - R-Mobile A1 (R8A77400)
+ compatible = "renesas,r8a7740"
+ - R-Car M1A (R8A77781)
+ compatible = "renesas,r8a7778"
+ - R-Car H1 (R8A77790)
+ compatible = "renesas,r8a7779"
+ - R-Car H2 (R8A77900)
+ compatible = "renesas,r8a7790"
+ - R-Car M2-W (R8A77910)
+ compatible = "renesas,r8a7791"
+ - R-Car V2H (R8A77920)
+ compatible = "renesas,r8a7792"
+ - R-Car M2-N (R8A77930)
+ compatible = "renesas,r8a7793"
+ - R-Car E2 (R8A77940)
+ compatible = "renesas,r8a7794"
+
+
+Boards:
+
+ - Alt
+ compatible = "renesas,alt", "renesas,r8a7794"
+ - APE6-EVM
+ compatible = "renesas,ape6evm", "renesas,r8a73a4"
+ - APE6-EVM - Reference Device Tree Implementation
+ compatible = "renesas,ape6evm-reference", "renesas,r8a73a4"
+ - Atmark Techno Armadillo-800 EVA
+ compatible = "renesas,armadillo800eva"
+ - BOCK-W
+ compatible = "renesas,bockw", "renesas,r8a7778"
+ - BOCK-W - Reference Device Tree Implementation
+ compatible = "renesas,bockw-reference", "renesas,r8a7778"
+ - Genmai (RTK772100BC00000BR)
+ compatible = "renesas,genmai", "renesas,r7s72100"
+ - Gose
+ compatible = "renesas,gose", "renesas,r8a7793"
+ - Henninger
+ compatible = "renesas,henninger", "renesas,r8a7791"
+ - Koelsch (RTP0RC7791SEB00010S)
+ compatible = "renesas,koelsch", "renesas,r8a7791"
+ - KZM9D
+ compatible = "renesas,kzm9d", "renesas,emev2"
+ - KZM-A9-GT
+ compatible = "renesas,kzm9g", "renesas,sh73a0"
+ - KZM-A9-GT - Reference Device Tree Implementation
+ compatible = "renesas,kzm9g-reference", "renesas,sh73a0"
+ - Lager (RTP0RC7790SEB00010S)
+ compatible = "renesas,lager", "renesas,r8a7790"
+ - Mackerel (R0P7372LC0016RL, AP4 EVM 2nd)
+ compatible = "renesas,mackerel"
+ - Marzen
+ compatible = "renesas,marzen", "renesas,r8a7779"
+
+Note: Reference Device Tree Implementations are temporary implementations
+ to ease the migration from platform devices to Device Tree, and are
+ intended to be removed in the future.
diff --git a/MAINTAINERS b/MAINTAINERS
index cf24bb5..24156ff 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1372,12 +1372,15 @@
F: drivers/sh/
ARM/SOCFPGA ARCHITECTURE
-M: Dinh Nguyen <dinguyen@altera.com>
+M: Dinh Nguyen <dinguyen@opensource.altera.com>
S: Maintained
F: arch/arm/mach-socfpga/
+W: http://www.rocketboards.org
+T: git://git.rocketboards.org/linux-socfpga.git
+T: git://git.rocketboards.org/linux-socfpga-next.git
ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT
-M: Dinh Nguyen <dinguyen@altera.com>
+M: Dinh Nguyen <dinguyen@opensource.altera.com>
S: Maintained
F: drivers/clk/socfpga/
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b51d485..fb1fee9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -291,7 +291,11 @@
omap3-devkit8000.dtb \
omap3-evm.dtb \
omap3-evm-37xx.dtb \
- omap3-gta04.dtb \
+ omap3-gta04a3.dtb \
+ omap3-gta04a4.dtb \
+ omap3-gta04a5.dtb \
+ omap3-ha.dtb \
+ omap3-ha-lcd.dtb \
omap3-igep0020.dtb \
omap3-igep0030.dtb \
omap3-ldp.dtb \
@@ -314,6 +318,7 @@
omap3-sbc-t3517.dtb \
omap3-sbc-t3530.dtb \
omap3-sbc-t3730.dtb \
+ omap3-thunder.dtb \
omap3-zoom3.dtb
dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \
am335x-bone.dtb \
@@ -346,7 +351,9 @@
dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8064-ifc6410.dtb \
qcom-apq8074-dragonboard.dtb \
+ qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
+ qcom-ipq8064-ap148.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
@@ -380,7 +387,8 @@
r8a7791-henninger.dtb \
r8a7791-koelsch.dtb \
r8a7790-lager.dtb \
- r8a7779-marzen.dtb
+ r8a7779-marzen.dtb \
+ r8a7794-alt.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_sockit.dtb \
@@ -496,6 +504,7 @@
dove-d2plug.dtb \
dove-d3plug.dtb \
dove-dove-db.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6589-aquaris5.dtb
targets += dtbs dtbs_install
targets += $(dtb-y)
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index bde1777..fe983d2 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -227,6 +227,7 @@
&tps {
regulators {
dcdc1_reg: regulator@0 {
+ regulator-name = "vdds_dpr";
regulator-always-on;
};
@@ -249,18 +250,22 @@
};
ldo1_reg: regulator@3 {
+ regulator-name = "vio,vrtc,vdds";
regulator-always-on;
};
ldo2_reg: regulator@4 {
+ regulator-name = "vdd_3v3aux";
regulator-always-on;
};
ldo3_reg: regulator@5 {
+ regulator-name = "vdd_1v8";
regulator-always-on;
};
ldo4_reg: regulator@6 {
+ regulator-name = "vdd_3v3a";
regulator-always-on;
};
};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 3a0a161..e4f165a 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -354,6 +354,10 @@
ti,hwmods = "mailbox";
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <8>;
+ mbox_wkupm3: wkup_m3 {
+ ti,mbox-tx = <0 0 0>;
+ ti,mbox-rx = <0 0 3>;
+ };
};
timer1: timer@44e31000 {
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 9b3d2ba..2f7570e 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -58,10 +58,12 @@
};
am43xx_pinmux: pinmux@44e10800 {
- compatible = "pinctrl-single";
+ compatible = "ti,am437-padconf", "pinctrl-single";
reg = <0x44e10800 0x31c>;
#address-cells = <1>;
#size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xffffffff>;
};
@@ -168,6 +170,10 @@
ti,hwmods = "mailbox";
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <8>;
+ mbox_wkupm3: wkup_m3 {
+ ti,mbox-tx = <0 0 0>;
+ ti,mbox-rx = <0 0 3>;
+ };
};
timer1: timer@44e31000 {
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 416f4e5..a495e58 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -43,6 +43,8 @@
};
mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
};
@@ -53,11 +55,15 @@
};
ethernet@70000 {
+ pinctrl-0 = <&ge0_rgmii_pins>;
+ pinctrl-names = "default";
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
ethernet@74000 {
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ pinctrl-names = "default";
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index 097df7d8..2b6d24e 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -91,6 +91,8 @@
};
mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
};
@@ -100,11 +102,15 @@
};
};
ethernet@70000 {
+ pinctrl-0 = <&ge0_rgmii_pins>;
+ pinctrl-names = "default";
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
ethernet@74000 {
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ pinctrl-names = "default";
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index d6d572e..29a7c4e 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -101,12 +101,16 @@
};
mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
phy0: ethernet-phy@0 { /* Marvell 88E1318 */
reg = <0>;
};
};
ethernet@74000 {
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ pinctrl-names = "default";
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
@@ -122,7 +126,7 @@
status = "okay";
isl12057: isl12057@68 {
- compatible = "isl,isl12057";
+ compatible = "isil,isl12057";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index c5fe8b5..c8b23c0 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -86,6 +86,8 @@
};
mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
phy0: ethernet-phy@0 { /* Marvell 88E1318 */
reg = <0>;
};
@@ -96,12 +98,16 @@
};
ethernet@70000 {
+ pinctrl-0 = <&ge0_rgmii_pins>;
+ pinctrl-names = "default";
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
ethernet@74000 {
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ pinctrl-names = "default";
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
@@ -117,7 +123,7 @@
status = "okay";
isl12057: isl12057@68 {
- compatible = "isl,isl12057";
+ compatible = "isil,isl12057";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index 4169f40..14c66e4 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -50,6 +50,18 @@
};
internal-regs {
+ pinctrl {
+ fan_pins: fan-pins {
+ marvell,pins = "mpp8";
+ marvell,function = "gpio";
+ };
+
+ led_pins: led-pins {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+ };
+
serial@12000 {
status = "okay";
};
@@ -59,6 +71,8 @@
};
mdio {
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
};
@@ -74,6 +88,8 @@
phy-mode = "sgmii";
};
ethernet@74000 {
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ pinctrl-names = "default";
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
@@ -106,6 +122,26 @@
};
};
+ gpio-fan {
+ compatible = "gpio-fan";
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = <0 0 3000 1>;
+ pinctrl-0 = <&fan_pins>;
+ pinctrl-names = "default";
+ };
+
+ gpio_leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ sw_led {
+ label = "370rd:green:sw";
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ };
+
nand@d0000 {
status = "okay";
num-cs = <1>;
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 23227e0..83286ec 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -110,7 +110,7 @@
};
spi0: spi@10600 {
- compatible = "marvell,orion-spi";
+ compatible = "marvell,armada-370-spi", "marvell,orion-spi";
reg = <0x10600 0x28>;
#address-cells = <1>;
#size-cells = <0>;
@@ -121,7 +121,7 @@
};
spi1: spi@10680 {
- compatible = "marvell,orion-spi";
+ compatible = "marvell,armada-370-spi", "marvell,orion-spi";
reg = <0x10680 0x28>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 21b588b..6b3c23b 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -151,6 +151,25 @@
"mpp62", "mpp60", "mpp58";
marvell,function = "audio";
};
+
+ mdio_pins: mdio-pins {
+ marvell,pins = "mpp17", "mpp18";
+ marvell,function = "ge";
+ };
+
+ ge0_rgmii_pins: ge0-rgmii-pins {
+ marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8",
+ "mpp9", "mpp10", "mpp11", "mpp12",
+ "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "ge0";
+ };
+
+ ge1_rgmii_pins: ge1-rgmii-pins {
+ marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22",
+ "mpp23", "mpp24", "mpp25", "mpp26",
+ "mpp27", "mpp28", "mpp29", "mpp30";
+ marvell,function = "ge1";
+ };
};
gpio0: gpio@18100 {
@@ -206,6 +225,10 @@
status = "okay";
};
+ sscg@18330 {
+ reg = <0x18330 0x4>;
+ };
+
interrupt-controller@20000 {
reg = <0x20a00 0x1d0>, <0x21870 0x58>;
};
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index c1e49e7..de65714 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -185,6 +185,12 @@
};
};
+ rtc@10300 {
+ compatible = "marvell,orion-rtc";
+ reg = <0x10300 0x20>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
spi0: spi@10600 {
compatible = "marvell,orion-spi";
reg = <0x10600 0x50>;
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index 0cf999a..252def8 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -174,7 +174,7 @@
status = "okay";
isl12057: isl12057@68 {
- compatible = "isl,isl12057";
+ compatible = "isil,isl12057";
reg = <0x68>;
};
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index bb23c2d..840958b 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -345,10 +345,14 @@
};
};
- ramc: ramc@ffffe200 {
+ ramc0: ramc@ffffe200 {
compatible = "atmel,at91sam9260-sdramc";
- reg = <0xffffe200 0x200
- 0xffffe800 0x200>;
+ reg = <0xffffe200 0x200>;
+ };
+
+ ramc1: ramc@ffffe800 {
+ compatible = "atmel,at91sam9260-sdramc";
+ reg = <0xffffe800 0x200>;
};
pit: timer@fffffd30 {
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 932a669..857fd3e 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -96,8 +96,14 @@
ramc0: ramc@ffffe400 {
compatible = "atmel,at91sam9g45-ddramc";
- reg = <0xffffe400 0x200
- 0xffffe600 0x200>;
+ reg = <0xffffe400 0x200>;
+ clocks = <&ddrck>;
+ clock-names = "ddrck";
+ };
+
+ ramc1: ramc@ffffe600 {
+ compatible = "atmel,at91sam9g45-ddramc";
+ reg = <0xffffe600 0x200>;
clocks = <&ddrck>;
clock-names = "ddrck";
};
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 2bfac31..68eb9ad 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -87,6 +87,8 @@
ramc0: ramc@ffffe800 {
compatible = "atmel,at91sam9g45-ddramc";
reg = <0xffffe800 0x200>;
+ clocks = <&ddrck>;
+ clock-names = "ddrck";
};
pmc: pmc@fffffc00 {
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index 83d7237..13bb24e 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -136,6 +136,8 @@
};
usb0: ohci@00500000 {
+ num-ports = <1>;
+ atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>;
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index e1a5c70..726274f 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -95,6 +95,8 @@
ramc0: ramc@ffffe800 {
compatible = "atmel,at91sam9g45-ddramc";
reg = <0xffffe800 0x200>;
+ clocks = <&ddrck>;
+ clock-names = "ddrck";
};
pmc: pmc@fffffc00 {
@@ -966,7 +968,7 @@
adc0: adc@f804c000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "atmel,at91sam9260-adc";
+ compatible = "atmel,at91sam9x5-adc";
reg = <0xf804c000 0x100>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&adc_clk>,
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 1e11e5a..4f935ad 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -17,6 +17,18 @@
soc {
pmx_core: pinmux@1c14120 {
status = "okay";
+
+ mcasp0_pins: pinmux_mcasp0_pins {
+ pinctrl-single,bits = <
+ /*
+ * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
+ * AFSR, AMUTE
+ */
+ 0x00 0x11111111 0xffffffff
+ /* AXR11, AXR12 */
+ 0x04 0x00011000 0x000ff000
+ >;
+ };
};
serial0: serial@1c42000 {
status = "okay";
@@ -39,6 +51,20 @@
tps: tps@48 {
reg = <0x48>;
};
+ tlv320aic3106: tlv320aic3106@18 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,tlv320aic3106";
+ reg = <0x18>;
+ status = "okay";
+
+ /* Regulators */
+ IOVDD-supply = <&vdcdc2_reg>;
+ /* Derived from VBAT: Baseboard 3.3V / 1.8V */
+ AVDD-supply = <&vbat>;
+ DRVDD-supply = <&vbat>;
+ DVDD-supply = <&vbat>;
+ };
+
};
wdt: wdt@1c21000 {
status = "okay";
@@ -117,6 +143,33 @@
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "DA850/OMAP-L138 EVM";
+ simple-audio-card,widgets =
+ "Line", "Line In",
+ "Line", "Line Out";
+ simple-audio-card,routing =
+ "LINE1L", "Line In",
+ "LINE1R", "Line In",
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT";
+ simple-audio-card,format = "dsp_b";
+ simple-audio-card,bitclock-master = <&link0_codec>;
+ simple-audio-card,frame-master = <&link0_codec>;
+ simple-audio-card,bitclock-inversion;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcasp0>;
+ system-clock-frequency = <24576000>;
+ };
+
+ link0_codec: simple-audio-card,codec {
+ sound-dai = <&tlv320aic3106>;
+ system-clock-frequency = <24576000>;
+ };
+ };
};
/include/ "tps6507x.dtsi"
@@ -170,3 +223,22 @@
};
};
};
+
+&mcasp0 {
+ #sound-dai-cells = <0>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcasp0_pins>;
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ /* 4 serializer */
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 0 0 0 0
+ 0 0 0 0
+ 0 0 0 1
+ 2 0 0 0
+ >;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
+};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index b695548..0bd98cd 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -150,6 +150,12 @@
};
};
+ edma0: edma@01c00000 {
+ compatible = "ti,edma3";
+ reg = <0x0 0x10000>;
+ interrupts = <11 13 12>;
+ #dma-cells = <1>;
+ };
serial0: serial@1c42000 {
compatible = "ns16550a";
reg = <0x42000 0x100>;
@@ -270,6 +276,19 @@
ti,davinci-gpio-unbanked = <0>;
status = "disabled";
};
+
+ mcasp0: mcasp@01d00000 {
+ compatible = "ti,da830-mcasp-audio";
+ reg = <0x100000 0x2000>,
+ <0x102000 0x400000>;
+ reg-names = "mpu", "dat";
+ interrupts = <54>;
+ interrupt-names = "common";
+ status = "disabled";
+ dmas = <&edma0 1>,
+ <&edma0 0>;
+ dma-names = "tx", "rx";
+ };
};
nand_cs3@62000000 {
compatible = "ti,davinci-nand";
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 50f8022..08434c7 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -303,6 +303,8 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>;
+ interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <&dra7_pmx_core 0x3e0>;
};
&uart2 {
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index d678152..1fd6b93 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -217,10 +217,12 @@
};
dra7_pmx_core: pinmux@4a003400 {
- compatible = "pinctrl-single";
+ compatible = "ti,dra7-padconf", "pinctrl-single";
reg = <0x4a003400 0x0464>;
#address-cells = <1>;
#size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0x3fffffff>;
};
@@ -328,7 +330,7 @@
uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
reg = <0x4806a000 0x100>;
- interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
status = "disabled";
@@ -337,7 +339,7 @@
uart2: serial@4806c000 {
compatible = "ti,omap4-uart";
reg = <0x4806c000 0x100>;
- interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
status = "disabled";
@@ -346,7 +348,7 @@
uart3: serial@48020000 {
compatible = "ti,omap4-uart";
reg = <0x48020000 0x100>;
- interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
status = "disabled";
@@ -355,7 +357,7 @@
uart4: serial@4806e000 {
compatible = "ti,omap4-uart";
reg = <0x4806e000 0x100>;
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
status = "disabled";
@@ -364,7 +366,7 @@
uart5: serial@48066000 {
compatible = "ti,omap4-uart";
reg = <0x48066000 0x100>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart5";
clock-frequency = <48000000>;
status = "disabled";
@@ -373,7 +375,7 @@
uart6: serial@48068000 {
compatible = "ti,omap4-uart";
reg = <0x48068000 0x100>;
- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart6";
clock-frequency = <48000000>;
status = "disabled";
@@ -382,7 +384,7 @@
uart7: serial@48420000 {
compatible = "ti,omap4-uart";
reg = <0x48420000 0x100>;
- interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&gic GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart7";
clock-frequency = <48000000>;
status = "disabled";
@@ -391,7 +393,7 @@
uart8: serial@48422000 {
compatible = "ti,omap4-uart";
reg = <0x48422000 0x100>;
- interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&gic GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart8";
clock-frequency = <48000000>;
status = "disabled";
@@ -400,7 +402,7 @@
uart9: serial@48424000 {
compatible = "ti,omap4-uart";
reg = <0x48424000 0x100>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&gic GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart9";
clock-frequency = <48000000>;
status = "disabled";
@@ -409,7 +411,7 @@
uart10: serial@4ae2b000 {
compatible = "ti,omap4-uart";
reg = <0x4ae2b000 0x100>;
- interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&gic GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart10";
clock-frequency = <48000000>;
status = "disabled";
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 5147023..4107428 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -19,6 +19,126 @@
};
};
+&dra7_pmx_core {
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ >;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <400000>;
+
+ tps65917: tps65917@58 {
+ compatible = "ti,tps65917";
+ reg = <0x58>;
+
+ interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ti,system-power-controller;
+
+ tps65917_pmic {
+ compatible = "ti,tps65917-pmic";
+
+ regulators {
+ smps1_reg: smps1 {
+ /* VDD_MPU */
+ regulator-name = "smps1";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps2_reg: smps2 {
+ /* VDD_CORE */
+ regulator-name = "smps2";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1030000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ smps3_reg: smps3 {
+ /* VDD_GPU IVA DSPEVE */
+ regulator-name = "smps3";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ smps4_reg: smps4 {
+ /* VDDS1V8 */
+ regulator-name = "smps4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps5_reg: smps5 {
+ /* VDD_DDR */
+ regulator-name = "smps5";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: ldo1 {
+ /* LDO1_OUT --> SDIO */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo2_reg: ldo2 {
+ /* LDO2_OUT --> TP1017 (UNUSED) */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo3_reg: ldo3 {
+ /* VDDA_1V8_PHY */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo5_reg: ldo5 {
+ /* VDDA_1V8_PLL */
+ regulator-name = "ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: ldo4 {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+};
+
&uart1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/mt6589-aquaris5.dts b/arch/arm/boot/dts/mt6589-aquaris5.dts
index 443b446..0da0470 100644
--- a/arch/arm/boot/dts/mt6589-aquaris5.dts
+++ b/arch/arm/boot/dts/mt6589-aquaris5.dts
@@ -18,6 +18,11 @@
/ {
model = "bq Aquaris5";
+ compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";
+
+ chosen {
+ bootargs = "earlyprintk";
+ };
memory {
reg = <0x80000000 0x40000000>;
diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi
index d0297a0..e3c7600 100644
--- a/arch/arm/boot/dts/mt6589.dtsi
+++ b/arch/arm/boot/dts/mt6589.dtsi
@@ -81,8 +81,8 @@
clock-names = "system-clk", "rtc-clk";
};
- gic: interrupt-controller@10212000 {
- compatible = "arm,cortex-a15-gic";
+ gic: interrupt-controller@10211000 {
+ compatible = "arm,cortex-a7-gic";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x10211000 0x1000>,
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index 9be3c12..ae89aad 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -159,6 +159,14 @@
ti,hwmods = "mailbox";
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <6>;
+ mbox_dsp: dsp {
+ ti,mbox-tx = <0 0 0>;
+ ti,mbox-rx = <1 0 0>;
+ };
+ mbox_iva: iva {
+ ti,mbox-tx = <2 1 3>;
+ ti,mbox-rx = <3 1 3>;
+ };
};
timer1: timer@48028000 {
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 1a00f15..b56d7161 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -249,6 +249,10 @@
ti,hwmods = "mailbox";
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <6>;
+ mbox_dsp: dsp {
+ ti,mbox-tx = <0 0 0>;
+ ti,mbox-rx = <1 0 0>;
+ };
};
timer1: timer@49018000 {
diff --git a/arch/arm/boot/dts/omap3-gta04.dts b/arch/arm/boot/dts/omap3-gta04.dtsi
similarity index 67%
rename from arch/arm/boot/dts/omap3-gta04.dts
rename to arch/arm/boot/dts/omap3-gta04.dtsi
index 021311f..fd34f91 100644
--- a/arch/arm/boot/dts/omap3-gta04.dts
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -26,6 +26,10 @@
reg = <0x80000000 0x20000000>; /* 512 MB */
};
+ aliases {
+ display0 = &lcd;
+ };
+
gpio-keys {
compatible = "gpio-keys";
@@ -74,9 +78,30 @@
};
};
};
+
+ hsusb2_phy: hsusb2_phy {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+ };
};
&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusb2_pins
+ >;
+
+ hsusb2_pins: pinmux_hsusb2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
+ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
+ OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
+ OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
+ OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
+ >;
+ };
+
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
@@ -141,12 +166,31 @@
0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
>;
};
+};
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusb2_2_pins
+ >;
+
+ hsusb2_2_pins: pinmux_hsusb2_2_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
spi_gpio_pins: spi_gpio_pinmux {
- pinctrl-single,pins = <0x5a8 (PIN_OUTPUT | MUX_MODE4) /* clk */
- 0x5b6 (PIN_OUTPUT | MUX_MODE4) /* cs */
- 0x5b8 (PIN_OUTPUT | MUX_MODE4) /* tx */
- 0x5b4 (PIN_INPUT | MUX_MODE4) /* rx */
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE4) /* clk */
+ OMAP3630_CORE2_IOPAD(0x25e6, PIN_OUTPUT | MUX_MODE4) /* cs */
+ OMAP3630_CORE2_IOPAD(0x25e8, PIN_OUTPUT | MUX_MODE4) /* tx */
+ OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE4) /* rx */
>;
};
};
@@ -196,6 +240,9 @@
#size-cells = <0>;
reg = <0x45>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
gta04_led0: red_aux@0 {
label = "gta04:red:aux";
reg = <0x0>;
@@ -216,11 +263,16 @@
label = "gta04:green:power";
reg = <0x4>;
};
+
+ wifi_reset: wifi_reset@6 {
+ reg = <0x6>;
+ compatible = "gpio";
+ };
};
/* compass aka magnetometer */
hmc5843@1e {
- compatible = "honeywell,hmc5843";
+ compatible = "honeywell,hmc5883l";
reg = <0x1e>;
};
@@ -248,6 +300,14 @@
power = <50>;
};
+&usbhshost {
+ port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <0 &hsusb2_phy>;
+};
+
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
@@ -286,11 +346,37 @@
bb_uamp = <150>;
};
+/* spare */
+&vaux1 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3000000>;
+};
+
+/* sensors */
+&vaux2 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+};
+
+/* camera */
+&vaux3 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+};
+
+/* WLAN/BT */
&vaux4 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3150000>;
};
+/* GPS LNA */
+&vsim {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3150000>;
+};
+
/* Needed to power the DPI pins */
&vpll2 {
regulator-always-on;
@@ -309,3 +395,57 @@
};
};
};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */
+
+ nand@0,0 {
+ reg = <0 0 0>; /* CS0, offset 0 */
+ nand-bus-width = <16>;
+ ti,nand-ecc-opt = "bch8";
+
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,device-width = <2>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ x-loader@0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+
+ bootloaders@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x1e0000>;
+ };
+
+ bootloaders_env@260000 {
+ label = "U-Boot Env";
+ reg = <0x260000 0x20000>;
+ };
+
+ kernel@280000 {
+ label = "Kernel";
+ reg = <0x280000 0x400000>;
+ };
+
+ filesystem@680000 {
+ label = "File System";
+ reg = <0x680000 0xf980000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-gta04a3.dts b/arch/arm/boot/dts/omap3-gta04a3.dts
new file mode 100644
index 0000000..3099a89
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-gta04a3.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-gta04.dtsi"
+
+/ {
+ model = "Goldelico GTA04A3";
+};
+
+&i2c2 {
+
+ /* alternate accelerometer that might be installed on some GTA04A3 boards */
+ lis302@1d {
+ compatible = "st,lis331dlh", "st,lis3lv02d";
+ reg = <0x1d>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+ Vdd-supply = <&vaux2>;
+ Vdd_IO-supply = <&vaux2>;
+
+ st,click-single-x;
+ st,click-single-y;
+ st,click-single-z;
+ st,click-thresh-x = <8>;
+ st,click-thresh-y = <8>;
+ st,click-thresh-z = <10>;
+ st,click-click-time-limit = <9>;
+ st,click-latency = <50>;
+ st,irq1-click;
+ st,wakeup-x-lo;
+ st,wakeup-x-hi;
+ st,wakeup-y-lo;
+ st,wakeup-y-hi;
+ st,wakeup-z-lo;
+ st,wakeup-z-hi;
+ st,min-limit-x = <32>;
+ st,min-limit-y = <3>;
+ st,min-limit-z = <3>;
+ st,max-limit-x = <3>;
+ st,max-limit-y = <32>;
+ st,max-limit-z = <32>;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-gta04a4.dts b/arch/arm/boot/dts/omap3-gta04a4.dts
new file mode 100644
index 0000000..c918bb1
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-gta04a4.dts
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2014 Marek Belisko <marek@goldelico.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-gta04.dtsi"
+
+/ {
+ model = "Goldelico GTA04A4";
+};
diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts
new file mode 100644
index 0000000..52b386f
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-gta04a5.dts
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-gta04.dtsi"
+
+/ {
+ model = "Goldelico GTA04A5";
+
+ sound {
+ ti,jack-det-gpio = <&twl_gpio 2 0>; /* GTA04A5 only */
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-ha-common.dtsi b/arch/arm/boot/dts/omap3-ha-common.dtsi
new file mode 100644
index 0000000..bd66545
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-ha-common.dtsi
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-tao3530.dtsi"
+
+/ {
+ gpio_poweroff {
+ pinctrl-names = "default";
+ pinctrl-0 = <&poweroff_pins>;
+
+ compatible = "gpio-poweroff";
+ gpios = <&gpio6 8 GPIO_ACTIVE_LOW>; /* GPIO 168 */
+ };
+};
+
+&omap3_pmx_core {
+ sound2_pins: pinmux_sound2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x209e, PIN_OUTPUT | MUX_MODE4) /* gpmc_d8 gpio_44 */
+ >;
+ };
+
+ led_blue_pins: pinmux_led_blue_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE4) /* cam_xclka gpio_96, LED blue */
+ >;
+ };
+
+ led_green_pins: pinmux_led_green_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2126, PIN_OUTPUT | MUX_MODE4) /* cam_d8 gpio_107, LED green */
+ >;
+ };
+
+ led_red_pins: pinmux_led_red_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT_PULLUP | MUX_MODE4) /* cam_xclkb gpio_111, LED red */
+ >;
+ };
+
+ poweroff_pins: pinmux_poweroff_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT_PULLUP | MUX_MODE4) /* i2c2_scl gpio_168 */
+ >;
+ };
+
+ powerdown_input_pins: pinmux_powerdown_input_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE4) /* i2c2_sda gpio_183 */
+ >;
+ };
+
+ fpga_boot0_pins: fpga_boot0_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* cam_d2 gpio_101 */
+ OMAP3_CORE1_IOPAD(0x211c, PIN_OUTPUT | MUX_MODE4) /* cam_d3 gpio_102 */
+ OMAP3_CORE1_IOPAD(0x211e, PIN_OUTPUT | MUX_MODE4) /* cam_d4 gpio_103 */
+ OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLUP | MUX_MODE4) /* cam_d5 gpio_104 */
+ >;
+ };
+
+ fpga_boot1_pins: fpga_boot1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE4) /* gpmc_d10 gpio_46 */
+ OMAP3_CORE1_IOPAD(0x20a4, PIN_OUTPUT | MUX_MODE4) /* gpmc_d11 gpio_47 */
+ OMAP3_CORE1_IOPAD(0x20a6, PIN_OUTPUT | MUX_MODE4) /* gpmc_d12 gpio_48 */
+ OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_d13 gpio_49 */
+ >;
+ };
+};
+
+/* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */
+&i2c2 {
+ status = "disabled";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+};
diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts
new file mode 100644
index 0000000..11aa28d
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-ha-lcd.dts
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-ha-common.dtsi"
+
+/ {
+ model = "TI OMAP3 HEAD acoustics LCD-baseboard with TAO3530 SOM";
+ compatible = "headacoustics,omap3-ha-lcd", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3";
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusbb2_pins
+ &powerdown_input_pins
+ &fpga_boot0_pins
+ &fpga_boot1_pins
+ &led_blue_pins
+ &led_green_pins
+ &led_red_pins
+ &touchscreen_wake_pins
+ >;
+
+ touchscreen_irq_pins: pinmux_touchscreen_irq_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio_136, Touchscreen IRQ */
+ >;
+ };
+
+ touchscreen_wake_pins: pinmux_touchscreen_wake_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x212c, PIN_OUTPUT_PULLUP | MUX_MODE4) /* gpio_110, Touchscreen Wake */
+ >;
+ };
+
+ dss_dpi_pins: pinmux_dss_dpi_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
+
+ lte430_pins: pinmux_lte430_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */
+ >;
+ };
+
+ backlight_pins: pinmux_backlight_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */
+ >;
+ };
+};
+
+/* I2C2: mux'ed with GPIO168 which is connected to nKILL_POWER */
+&i2c2 {
+ status = "disabled";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+ regulator-always-on;
+};
+
+&dss {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins>;
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+/ {
+ aliases {
+ display0 = &lcd0;
+ };
+
+ lcd0: display@0 {
+ compatible = "panel-dpi";
+ label = "lcd";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <<e430_pins>;
+ enable-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 */
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <31250000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <40>;
+ hback-porch = <86>;
+ hsync-len = <1>;
+ vback-porch = <30>;
+ vfront-porch = <13>;
+ vsync-len = <3>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+
+ backlight {
+ compatible = "gpio-backlight";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&backlight_pins>;
+ gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 */
+
+ default-on;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3-ha.dts b/arch/arm/boot/dts/omap3-ha.dts
new file mode 100644
index 0000000..fde3256
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-ha.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-ha-common.dtsi"
+
+/ {
+ model = "TI OMAP3 HEAD acoustics baseboard with TAO3530 SOM";
+ compatible = "headacoustics,omap3-ha", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3";
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusbb2_pins
+ &powerdown_input_pins
+ &fpga_boot0_pins
+ &fpga_boot1_pins
+ &led_blue_pins
+ &led_green_pins
+ &led_red_pins
+ >;
+};
diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi
new file mode 100644
index 0000000..b30f387
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-tao3530.dtsi
@@ -0,0 +1,337 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap34xx-hs.dtsi"
+
+/ {
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vcc>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ /* HS USB Port 2 Power */
+ hsusb2_power: hsusb2_power_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb2_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&twl_gpio 18 0>; /* GPIO LEDA */
+ startup-delay-us = <70000>;
+ };
+
+ /* HS USB Host PHY on PORT 2 */
+ hsusb2_phy: hsusb2_phy {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* gpio_162 */
+ vcc-supply = <&hsusb2_power>;
+ };
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "omap3beagle";
+
+ /* McBSP2 is used for onboard sound, same as on beagle */
+ ti,mcbsp = <&mcbsp2>;
+ ti,codec = <&twl_audio>;
+ };
+
+ /* Regulator to enable/switch the vcc of the Wifi module */
+ mmc2_sdio_poweron: regulator-mmc2-sdio-poweron {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-mmc2-sdio-poweron";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+ gpio = <&gpio5 29 GPIO_ACTIVE_LOW>; /* gpio_157 */
+ enable-active-low;
+ startup-delay-us = <10000>;
+ };
+};
+
+&omap3_pmx_core {
+ hsusbb2_pins: pinmux_hsusbb2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3_CORE1_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3_CORE1_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3_CORE1_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3_CORE1_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3_CORE1_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
+ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
+ OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
+ OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
+ OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */
+ OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */
+ OMAP3_CORE1_IOPAD(0x2154, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */
+ OMAP3_CORE1_IOPAD(0x2156, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */
+ >;
+ };
+
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
+ OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
+ OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
+ OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
+ >;
+ };
+
+ /* wlan GPIO output for WLAN_EN */
+ wlan_gpio: pinmux_wlan_gpio {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr gpio_157 */
+ >;
+ };
+
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ >;
+ };
+
+ i2c3_pins: pinmux_i2c3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl.i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.i2c3_sda */
+ >;
+ };
+
+ mcspi1_pins: pinmux_mcspi1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
+ OMAP3_CORE1_IOPAD(0x21ca, PIN_OUTPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
+ OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
+ OMAP3_CORE1_IOPAD(0x21ce, PIN_OUTPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
+ >;
+ };
+
+ mcspi3_pins: pinmux_mcspi3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x25dc, PIN_OUTPUT | MUX_MODE1) /* etk_d0.mcspi3_simo gpio14 INPUT | MODE1 */
+ OMAP3_CORE1_IOPAD(0x25de, PIN_INPUT_PULLUP | MUX_MODE1) /* etk_d1.mcspi3_somi gpio15 INPUT | MODE1 */
+ OMAP3_CORE1_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE1) /* etk_d2.mcspi3_cs0 gpio16 INPUT | MODE1 */
+ OMAP3_CORE1_IOPAD(0x25e2, PIN_INPUT | MUX_MODE1) /* etk_d3.mcspi3_clk gpio17 INPUT | MODE1 */
+ >;
+ };
+
+ mcbsp3_pins: pinmux_mcbsp3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0) /* mcbsp3_dx.uart2_cts */
+ OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0) /* mcbsp3_dr.uart2_rts */
+ OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0) /* mcbsp3_clk.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0) /* mcbsp3_fsx.uart2_rx */
+ >;
+ };
+};
+
+/* McBSP1: mux'ed with GPIO158 as clock for HA-DSP */
+&mcbsp1 {
+ status = "disabled";
+};
+
+&mcbsp2 {
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <2600000>;
+
+ twl: twl@48 {
+ reg = <0x48>;
+ interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+ interrupt-parent = <&intc>;
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+};
+
+&mcspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi1_pins>;
+
+ spidev@0 {
+ compatible = "spidev";
+ spi-max-frequency = <48000000>;
+ reg = <0>;
+ spi-cpha;
+ };
+};
+
+&mcspi3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi3_pins>;
+
+ spidev@0 {
+ compatible = "spidev";
+ spi-max-frequency = <48000000>;
+ reg = <0>;
+ spi-cpha;
+ };
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vmmc1>;
+ vmmc_aux-supply = <&vsim>;
+ cd-gpios = <&twl_gpio 0 0>;
+ bus-width = <8>;
+};
+
+// WiFi (Marvell 88W8686) on MMC2/SDIO
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&mmc2_sdio_poweron>;
+ non-removable;
+ bus-width = <4>;
+ cap-power-off-card;
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
+&usbhshost {
+ port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <0 &hsusb2_phy>;
+};
+
+&twl_gpio {
+ ti,use-leds;
+ /* pullups: BIT(1) */
+ ti,pullups = <0x000002>;
+ /*
+ * pulldowns:
+ * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+ * BIT(15), BIT(16), BIT(17)
+ */
+ ti,pulldowns = <0x03a1c4>;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&mcbsp3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp3_pins>;
+};
+
+&gpmc {
+ ranges = <0 0 0x00000000 0x01000000>;
+
+ nand@0,0 {
+ reg = <0 0 0>; /* CS0, offset 0 */
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
+ ti,nand-ecc-opt = "sw";
+
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <36>;
+ gpmc,cs-wr-off-ns = <36>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <24>;
+ gpmc,adv-wr-off-ns = <36>;
+ gpmc,oe-on-ns = <6>;
+ gpmc,oe-off-ns = <48>;
+ gpmc,we-on-ns = <6>;
+ gpmc,we-off-ns = <30>;
+ gpmc,rd-cycle-ns = <72>;
+ gpmc,wr-cycle-ns = <72>;
+ gpmc,access-ns = <54>;
+ gpmc,wr-access-ns = <30>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ x-loader@0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+
+ bootloaders@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x1e0000>;
+ };
+
+ bootloaders_env@260000 {
+ label = "U-Boot Env";
+ reg = <0x260000 0x20000>;
+ };
+
+ kernel@280000 {
+ label = "Kernel";
+ reg = <0x280000 0x400000>;
+ };
+
+ filesystem@680000 {
+ label = "File System";
+ reg = <0x680000 0xf980000>;
+ };
+ };
+};
+
+&usb_otg_hs {
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};
+
+&vaux2 {
+ regulator-name = "vdd_ehci";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+};
diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts
new file mode 100644
index 0000000..d659515
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-thunder.dts
@@ -0,0 +1,129 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-tao3530.dtsi"
+
+/ {
+ model = "TI OMAP3 Thunder baseboard with TAO3530 SOM";
+ compatible = "technexion,omap3-thunder", "technexion,omap3-tao3530", "ti,omap34xx", "ti,omap3";
+};
+
+&omap3_pmx_core {
+ dss_dpi_pins: pinmux_dss_dpi_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
+
+ lte430_pins: pinmux_lte430_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */
+ >;
+ };
+
+ backlight_pins: pinmux_backlight_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */
+ >;
+ };
+};
+
+/* Needed to power the DPI pins */
+&vpll2 {
+ regulator-always-on;
+};
+
+&dss {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins>;
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
+/ {
+ aliases {
+ display0 = &lcd0;
+ };
+
+ lcd0: display@0 {
+ compatible = "samsung,lte430wq-f0c", "panel-dpi";
+ label = "lcd";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <<e430_pins>;
+ enable-gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; /* gpio_138 */
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <9000000>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <3>;
+ hback-porch = <2>;
+ hsync-len = <42>;
+ vback-porch = <2>;
+ vfront-porch = <3>;
+ vsync-len = <11>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+
+ backlight {
+ compatible = "gpio-backlight";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&backlight_pins>;
+ gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 */
+
+ default-on;
+ };
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 575a49b..b2ae8b8 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -334,6 +334,10 @@
interrupts = <26>;
ti,mbox-num-users = <2>;
ti,mbox-num-fifos = <2>;
+ mbox_dsp: dsp {
+ ti,mbox-tx = <0 0 0>;
+ ti,mbox-rx = <1 0 0>;
+ };
};
mcspi1: spi@48098000 {
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 69408b5..bc54d66 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -656,6 +656,14 @@
ti,hwmods = "mailbox";
ti,mbox-num-users = <3>;
ti,mbox-num-fifos = <8>;
+ mbox_ipu: mbox_ipu {
+ ti,mbox-tx = <0 0 0>;
+ ti,mbox-rx = <1 0 0>;
+ };
+ mbox_dsp: mbox_dsp {
+ ti,mbox-tx = <3 0 0>;
+ ti,mbox-rx = <2 0 0>;
+ };
};
timer1: timer@4a318000 {
diff --git a/arch/arm/boot/dts/omap5-sbc-t54.dts b/arch/arm/boot/dts/omap5-sbc-t54.dts
index aa98fea..8e89793 100644
--- a/arch/arm/boot/dts/omap5-sbc-t54.dts
+++ b/arch/arm/boot/dts/omap5-sbc-t54.dts
@@ -1,11 +1,11 @@
/*
- * Suppport for CompuLab SBC-T54 with CM-T54
+ * Suppport for CompuLab CM-T54 on SB-T54 baseboard
*/
#include "omap5-cm-t54.dts"
/ {
- model = "CompuLab SBC-T54 with CM-T54";
+ model = "CompuLab CM-T54 on SB-T54";
compatible = "compulab,omap5-sbc-t54", "compulab,omap5-cm-t54", "ti,omap5";
};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index fc8df17..30ce71a 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -187,18 +187,22 @@
};
omap5_pmx_core: pinmux@4a002840 {
- compatible = "ti,omap4-padconf", "pinctrl-single";
+ compatible = "ti,omap5-padconf", "pinctrl-single";
reg = <0x4a002840 0x01b6>;
#address-cells = <1>;
#size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0x7fff>;
};
omap5_pmx_wkup: pinmux@4ae0c840 {
- compatible = "ti,omap4-padconf", "pinctrl-single";
+ compatible = "ti,omap5-padconf", "pinctrl-single";
reg = <0x4ae0c840 0x0038>;
#address-cells = <1>;
#size-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0x7fff>;
};
@@ -447,7 +451,7 @@
uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
reg = <0x4806a000 0x100>;
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
};
@@ -455,7 +459,7 @@
uart2: serial@4806c000 {
compatible = "ti,omap4-uart";
reg = <0x4806c000 0x100>;
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
@@ -463,7 +467,7 @@
uart3: serial@48020000 {
compatible = "ti,omap4-uart";
reg = <0x48020000 0x100>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
@@ -471,7 +475,7 @@
uart4: serial@4806e000 {
compatible = "ti,omap4-uart";
reg = <0x4806e000 0x100>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
@@ -479,7 +483,7 @@
uart5: serial@48066000 {
compatible = "ti,omap4-uart";
reg = <0x48066000 0x100>;
- interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart5";
clock-frequency = <48000000>;
};
@@ -487,7 +491,7 @@
uart6: serial@48068000 {
compatible = "ti,omap4-uart";
reg = <0x48068000 0x100>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart6";
clock-frequency = <48000000>;
};
@@ -642,6 +646,14 @@
ti,hwmods = "mailbox";
ti,mbox-num-users = <3>;
ti,mbox-num-fifos = <8>;
+ mbox_ipu: mbox_ipu {
+ ti,mbox-tx = <0 0 0>;
+ ti,mbox-rx = <1 0 0>;
+ };
+ mbox_dsp: mbox_dsp {
+ ti,mbox-tx = <3 0 0>;
+ ti,mbox-rx = <2 0 0>;
+ };
};
timer1: timer@4ae18000 {
@@ -945,6 +957,15 @@
clock-names = "fck";
};
+ rfbi: encoder@58002000 {
+ compatible = "ti,omap5-rfbi";
+ reg = <0x58002000 0x100>;
+ status = "disabled";
+ ti,hwmods = "dss_rfbi";
+ clocks = <&dss_dss_clk>, <&l3_iclk_div>;
+ clock-names = "fck", "ick";
+ };
+
dsi1: encoder@58004000 {
compatible = "ti,omap5-dsi";
reg = <0x58004000 0x200>,
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 7c2441d..b396c83 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -5,6 +5,33 @@
compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
soc {
+ pinctrl@800000 {
+ i2c1_pins: i2c1 {
+ mux {
+ pins = "gpio20", "gpio21";
+ function = "gsbi1";
+ };
+ };
+ };
+
+ gsbi@12440000 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C>;
+
+ i2c@12460000 {
+ status = "okay";
+ clock-frequency = <200000>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ eeprom: eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ pagesize = <32>;
+ };
+ };
+ };
+
gsbi@16600000 {
status = "ok";
qcom,mode = <GSBI_PROT_I2C_UART>;
@@ -12,5 +39,21 @@
status = "ok";
};
};
+
+ amba {
+ /* eMMC */
+ sdcc1: sdcc@12400000 {
+ status = "okay";
+ };
+
+ /* External micro SD card */
+ sdcc3: sdcc@12180000 {
+ status = "okay";
+ };
+ /* WLAN */
+ sdcc4: sdcc@121c0000 {
+ status = "okay";
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 92bf793..b3154c0 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -2,7 +2,9 @@
#include "skeleton.dtsi"
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
#include <dt-bindings/soc/qcom,gsbi.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
model = "Qualcomm APQ8064";
@@ -70,6 +72,34 @@
ranges;
compatible = "simple-bus";
+ tlmm_pinmux: pinctrl@800000 {
+ compatible = "qcom,apq8064-pinctrl";
+ reg = <0x800000 0x4000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ps_hold>;
+
+ sdc4_gpios: sdc4-gpios {
+ pios {
+ pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
+ function = "sdc4";
+ };
+ };
+
+ ps_hold: ps_hold {
+ mux {
+ pins = "gpio78";
+ function = "ps_hold";
+ };
+ };
+ };
+
intc: interrupt-controller@2000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
@@ -133,6 +163,48 @@
regulator;
};
+ gsbi1: gsbi@12440000 {
+ status = "disabled";
+ compatible = "qcom,gsbi-v1.0.0";
+ reg = <0x12440000 0x100>;
+ clocks = <&gcc GSBI1_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ i2c1: i2c@12460000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x12460000 0x1000>;
+ interrupts = <0 194 IRQ_TYPE_NONE>;
+ clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ gsbi2: gsbi@12480000 {
+ status = "disabled";
+ compatible = "qcom,gsbi-v1.0.0";
+ reg = <0x12480000 0x100>;
+ clocks = <&gcc GSBI2_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ i2c2: i2c@124a0000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x124a0000 0x1000>;
+ interrupts = <0 196 IRQ_TYPE_NONE>;
+ clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
gsbi7: gsbi@16600000 {
status = "disabled";
compatible = "qcom,gsbi-v1.0.0";
@@ -166,5 +238,116 @@
#clock-cells = <1>;
#reset-cells = <1>;
};
+
+ mmcc: clock-controller@4000000 {
+ compatible = "qcom,mmcc-apq8064";
+ reg = <0x4000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ /* Temporary fixed regulator */
+ vsdcc_fixed: vsdcc-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "SDCC Power";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ regulator-always-on;
+ };
+
+ sdcc1bam:dma@12402000{
+ compatible = "qcom,bam-v1.3.0";
+ reg = <0x12402000 0x8000>;
+ interrupts = <0 98 0>;
+ clocks = <&gcc SDC1_H_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ sdcc3bam:dma@12182000{
+ compatible = "qcom,bam-v1.3.0";
+ reg = <0x12182000 0x8000>;
+ interrupts = <0 96 0>;
+ clocks = <&gcc SDC3_H_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ sdcc4bam:dma@121c2000{
+ compatible = "qcom,bam-v1.3.0";
+ reg = <0x121c2000 0x8000>;
+ interrupts = <0 95 0>;
+ clocks = <&gcc SDC4_H_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ sdcc1: sdcc@12400000 {
+ status = "disabled";
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ reg = <0x12400000 0x2000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ max-frequency = <96000000>;
+ non-removable;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ vmmc-supply = <&vsdcc_fixed>;
+ dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+ dma-names = "tx", "rx";
+ };
+
+ sdcc3: sdcc@12180000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ status = "disabled";
+ reg = <0x12180000 0x2000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <192000000>;
+ no-1-8-v;
+ vmmc-supply = <&vsdcc_fixed>;
+ dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+ dma-names = "tx", "rx";
+ };
+
+ sdcc4: sdcc@121c0000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ status = "disabled";
+ reg = <0x121c0000 0x2000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <48000000>;
+ vmmc-supply = <&vsdcc_fixed>;
+ vqmmc-supply = <&vsdcc_fixed>;
+ dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdc4_gpios>;
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
index b4dfb01..4737049 100644
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -22,6 +22,13 @@
pinctrl@fd510000 {
+ i2c11_pins: i2c11 {
+ mux {
+ pins = "gpio83", "gpio84";
+ function = "blsp_i2c11";
+ };
+ };
+
spi8_default: spi8_default {
mosi {
pins = "gpio45";
@@ -41,5 +48,19 @@
};
};
};
+
+ i2c@f9967000 {
+ status = "okay";
+ clock-frequency = <200000>;
+ pinctrl-0 = <&i2c11_pins>;
+ pinctrl-names = "default";
+
+ eeprom: eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ pagesize = <32>;
+ read-only;
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
new file mode 100644
index 0000000..c9ff108
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
@@ -0,0 +1,23 @@
+#include "qcom-apq8084.dtsi"
+
+/ {
+ model = "Qualcomm APQ8084/IFC6540";
+ compatible = "qcom,apq8084-ifc6540", "qcom,apq8084";
+
+ soc {
+ serial@f995e000 {
+ status = "okay";
+ };
+
+ sdhci@f9824900 {
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+ };
+
+ sdhci@f98a4900 {
+ cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
index 9dae387..8ecec58 100644
--- a/arch/arm/boot/dts/qcom-apq8084-mtp.dts
+++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
@@ -3,4 +3,10 @@
/ {
model = "Qualcomm APQ 8084-MTP";
compatible = "qcom,apq8084-mtp", "qcom,apq8084";
+
+ soc {
+ serial@f995e000 {
+ status = "okay";
+ };
+ };
};
diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index e3e009a..1f130bc 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -2,6 +2,9 @@
#include "skeleton.dtsi"
+#include <dt-bindings/clock/qcom,gcc-apq8084.h>
+#include <dt-bindings/gpio/gpio.h>
+
/ {
model = "Qualcomm APQ 8084";
compatible = "qcom,apq8084";
@@ -175,5 +178,53 @@
compatible = "qcom,pshold";
reg = <0xfc4ab000 0x4>;
};
+
+ gcc: clock-controller@fc400000 {
+ compatible = "qcom,gcc-apq8084";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ reg = <0xfc400000 0x4000>;
+ };
+
+ tlmm: pinctrl@fd510000 {
+ compatible = "qcom,apq8084-pinctrl";
+ reg = <0xfd510000 0x4000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 208 0>;
+ };
+
+ serial@f995e000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf995e000 0x1000>;
+ interrupts = <0 114 0x0>;
+ clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ sdhci@f9824900 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+ interrupts = <0 123 0>, <0 138 0>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ sdhci@f98a4900 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+ interrupts = <0 125 0>, <0 221 0>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
new file mode 100644
index 0000000..95e6495
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -0,0 +1,85 @@
+#include "qcom-ipq8064-v1.0.dtsi"
+
+/ {
+ model = "Qualcomm IPQ8064/AP148";
+ compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ rsvd@41200000 {
+ reg = <0x41200000 0x300000>;
+ no-map;
+ };
+ };
+
+ soc {
+ pinmux@800000 {
+ i2c4_pins: i2c4_pinmux {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ bias-disable;
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ drive-strength = <10>;
+ bias-none;
+ };
+ };
+ };
+
+ gsbi@16300000 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "ok";
+ serial@16340000 {
+ status = "ok";
+ };
+
+ i2c4: i2c@16380000 {
+ status = "ok";
+
+ clock-frequency = <200000>;
+
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "default";
+ };
+ };
+
+ gsbi5: gsbi@1a200000 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "ok";
+
+ spi4: spi@1a280000 {
+ status = "ok";
+ spi-max-frequency = <50000000>;
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 0>;
+
+ flash: m25p80@0 {
+ compatible = "s25fl256s1";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partition@0 {
+ label = "rootfs";
+ reg = <0x0 0x1000000>;
+ };
+
+ partition@1 {
+ label = "scratch";
+ reg = <0x1000000 0x1000000>;
+ };
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
new file mode 100644
index 0000000..7093b07
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
@@ -0,0 +1 @@
+#include "qcom-ipq8064.dtsi"
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
new file mode 100644
index 0000000..244f857
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -0,0 +1,250 @@
+/dts-v1/;
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+
+/ {
+ model = "Qualcomm IPQ8064";
+ compatible = "qcom,ipq8064";
+ interrupt-parent = <&intc>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "qcom,krait";
+ enable-method = "qcom,kpss-acc-v1";
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ qcom,acc = <&acc0>;
+ qcom,saw = <&saw0>;
+ };
+
+ cpu@1 {
+ compatible = "qcom,krait";
+ enable-method = "qcom,kpss-acc-v1";
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ qcom,acc = <&acc1>;
+ qcom,saw = <&saw1>;
+ };
+
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ cpu-pmu {
+ compatible = "qcom,krait-pmu";
+ interrupts = <1 10 0x304>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ nss@40000000 {
+ reg = <0x40000000 0x1000000>;
+ no-map;
+ };
+
+ smem@41000000 {
+ reg = <0x41000000 0x200000>;
+ no-map;
+ };
+ };
+
+ soc: soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
+
+ qcom_pinmux: pinmux@800000 {
+ compatible = "qcom,ipq8064-pinctrl";
+ reg = <0x800000 0x4000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 32 0x4>;
+ };
+
+ intc: interrupt-controller@2000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x02000000 0x1000>,
+ <0x02002000 0x1000>;
+ };
+
+ timer@200a000 {
+ compatible = "qcom,kpss-timer", "qcom,msm-timer";
+ interrupts = <1 1 0x301>,
+ <1 2 0x301>,
+ <1 3 0x301>;
+ reg = <0x0200a000 0x100>;
+ clock-frequency = <25000000>,
+ <32768>;
+ cpu-offset = <0x80000>;
+ };
+
+ acc0: clock-controller@2088000 {
+ compatible = "qcom,kpss-acc-v1";
+ reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+ };
+
+ acc1: clock-controller@2098000 {
+ compatible = "qcom,kpss-acc-v1";
+ reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+ };
+
+ saw0: regulator@2089000 {
+ compatible = "qcom,saw2";
+ reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+ regulator;
+ };
+
+ saw1: regulator@2099000 {
+ compatible = "qcom,saw2";
+ reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+ regulator;
+ };
+
+ gsbi2: gsbi@12480000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ reg = <0x12480000 0x100>;
+ clocks = <&gcc GSBI2_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ serial@12490000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x12490000 0x1000>,
+ <0x12480000 0x1000>;
+ interrupts = <0 195 0x0>;
+ clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ i2c@124a0000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x124a0000 0x1000>;
+ interrupts = <0 196 0>;
+
+ clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ };
+
+ gsbi4: gsbi@16300000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ reg = <0x16300000 0x100>;
+ clocks = <&gcc GSBI4_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ serial@16340000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x16340000 0x1000>,
+ <0x16300000 0x1000>;
+ interrupts = <0 152 0x0>;
+ clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ i2c@16380000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x16380000 0x1000>;
+ interrupts = <0 153 0>;
+
+ clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ gsbi5: gsbi@1a200000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ reg = <0x1a200000 0x100>;
+ clocks = <&gcc GSBI5_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ serial@1a240000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x1a240000 0x1000>,
+ <0x1a200000 0x1000>;
+ interrupts = <0 154 0x0>;
+ clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ i2c@1a280000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x1a280000 0x1000>;
+ interrupts = <0 155 0>;
+
+ clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi@1a280000 {
+ compatible = "qcom,spi-qup-v1.1.1";
+ reg = <0x1a280000 0x1000>;
+ interrupts = <0 155 0>;
+
+ clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ qcom,ssbi@500000 {
+ compatible = "qcom,ssbi";
+ reg = <0x00500000 0x1000>;
+ qcom,controller-type = "pmic-arbiter";
+ };
+
+ gcc: clock-controller@900000 {
+ compatible = "qcom,gcc-ipq8064";
+ reg = <0x00900000 0x4000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index 45180ad..e0883c3 100644
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -1,3 +1,5 @@
+#include <dt-bindings/input/input.h>
+
#include "qcom-msm8660.dtsi"
/ {
@@ -12,5 +14,45 @@
status = "ok";
};
};
+
+ amba {
+ /* eMMC */
+ sdcc1: sdcc@12400000 {
+ status = "okay";
+ };
+
+ /* External micro SD card */
+ sdcc3: sdcc@12180000 {
+ status = "okay";
+ };
+ };
+ };
+};
+
+&pmicintc {
+ keypad@148 {
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_FN_F1)
+ MATRIX_KEY(0, 1, KEY_UP)
+ MATRIX_KEY(0, 2, KEY_LEFT)
+ MATRIX_KEY(0, 3, KEY_VOLUMEUP)
+ MATRIX_KEY(1, 0, KEY_FN_F2)
+ MATRIX_KEY(1, 1, KEY_RIGHT)
+ MATRIX_KEY(1, 2, KEY_DOWN)
+ MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
+ MATRIX_KEY(2, 3, KEY_ENTER)
+ MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
+ MATRIX_KEY(4, 1, KEY_UP)
+ MATRIX_KEY(4, 2, KEY_LEFT)
+ MATRIX_KEY(4, 3, KEY_HOME)
+ MATRIX_KEY(4, 4, KEY_FN_F3)
+ MATRIX_KEY(5, 0, KEY_CAMERA)
+ MATRIX_KEY(5, 1, KEY_RIGHT)
+ MATRIX_KEY(5, 2, KEY_DOWN)
+ MATRIX_KEY(5, 3, KEY_BACK)
+ MATRIX_KEY(5, 4, KEY_MENU)
+ >;
+ keypad,num-rows = <6>;
+ keypad,num-columns = <5>;
};
};
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 53837aaa2f..0affd61 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -2,6 +2,7 @@
/include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8660.h>
#include <dt-bindings/soc/qcom,gsbi.h>
@@ -103,6 +104,98 @@
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
+
+ pmicintc: pmic@0 {
+ compatible = "qcom,pm8058";
+ interrupt-parent = <&msmgpio>;
+ interrupts = <88 8>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pwrkey@1c {
+ compatible = "qcom,pm8058-pwrkey";
+ reg = <0x1c>;
+ interrupt-parent = <&pmicintc>;
+ interrupts = <50 1>, <51 1>;
+ debounce = <15625>;
+ pull-up;
+ };
+
+ keypad@148 {
+ compatible = "qcom,pm8058-keypad";
+ reg = <0x148>;
+ interrupt-parent = <&pmicintc>;
+ interrupts = <74 1>, <75 1>;
+ debounce = <15>;
+ scan-delay = <32>;
+ row-hold = <91500>;
+ };
+
+ rtc@11d {
+ compatible = "qcom,pm8058-rtc";
+ interrupt-parent = <&pmicintc>;
+ interrupts = <39 1>;
+ reg = <0x11d>;
+ allow-set-time;
+ };
+
+ vibrator@4a {
+ compatible = "qcom,pm8058-vib";
+ reg = <0x4a>;
+ };
+ };
+ };
+
+ /* Temporary fixed regulator */
+ vsdcc_fixed: vsdcc-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "SDCC Power";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ regulator-always-on;
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ sdcc1: sdcc@12400000 {
+ status = "disabled";
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ reg = <0x12400000 0x8000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ max-frequency = <48000000>;
+ non-removable;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ vmmc-supply = <&vsdcc_fixed>;
+ };
+
+ sdcc3: sdcc@12180000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ status = "disabled";
+ reg = <0x12180000 0x8000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <48000000>;
+ no-1-8-v;
+ vmmc-supply = <&vsdcc_fixed>;
+ };
};
};
+
};
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 8f75cc4..7f70fae 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -1,3 +1,5 @@
+#include <dt-bindings/input/input.h>
+
#include "qcom-msm8960.dtsi"
/ {
@@ -12,5 +14,30 @@
status = "ok";
};
};
+
+ amba {
+ /* eMMC */
+ sdcc1: sdcc@12400000 {
+ status = "okay";
+ };
+
+ /* External micro SD card */
+ sdcc3: sdcc@12180000 {
+ status = "okay";
+ };
+ };
+ };
+};
+
+&pmicintc {
+ keypad@148 {
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_VOLUMEUP)
+ MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
+ MATRIX_KEY(0, 3, KEY_CAMERA)
+ >;
+ keypad,num-rows = <1>;
+ keypad,num-columns = <5>;
};
};
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 5303e53..e1b0d5c 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -2,6 +2,7 @@
/include/ "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
#include <dt-bindings/soc/qcom,gsbi.h>
@@ -143,6 +144,43 @@
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
+
+ pmicintc: pmic@0 {
+ compatible = "qcom,pm8921";
+ interrupt-parent = <&msmgpio>;
+ interrupts = <104 8>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pwrkey@1c {
+ compatible = "qcom,pm8921-pwrkey";
+ reg = <0x1c>;
+ interrupt-parent = <&pmicintc>;
+ interrupts = <50 1>, <51 1>;
+ debounce = <15625>;
+ pull-up;
+ };
+
+ keypad@148 {
+ compatible = "qcom,pm8921-keypad";
+ reg = <0x148>;
+ interrupt-parent = <&pmicintc>;
+ interrupts = <74 1>, <75 1>;
+ debounce = <15>;
+ scan-delay = <32>;
+ row-hold = <91500>;
+ };
+
+ rtc@11d {
+ compatible = "qcom,pm8921-rtc";
+ interrupt-parent = <&pmicintc>;
+ interrupts = <39 1>;
+ reg = <0x11d>;
+ allow-set-time;
+ };
+ };
};
rng@1a500000 {
@@ -151,5 +189,54 @@
clocks = <&gcc PRNG_CLK>;
clock-names = "core";
};
+
+ /* Temporary fixed regulator */
+ vsdcc_fixed: vsdcc-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "SDCC Power";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ regulator-always-on;
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ sdcc1: sdcc@12400000 {
+ status = "disabled";
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ reg = <0x12400000 0x8000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ max-frequency = <96000000>;
+ non-removable;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ vmmc-supply = <&vsdcc_fixed>;
+ };
+
+ sdcc3: sdcc@12180000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ status = "disabled";
+ reg = <0x12180000 0x8000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <192000000>;
+ no-1-8-v;
+ vmmc-supply = <&vsdcc_fixed>;
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 69dca2a..e265ec1 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1,8 +1,8 @@
/dts-v1/;
-#include "skeleton.dtsi"
-
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
+#include "skeleton.dtsi"
/ {
model = "Qualcomm MSM8974";
@@ -236,5 +236,16 @@
#interrupt-cells = <2>;
interrupts = <0 208 0>;
};
+
+ blsp_i2c11: i2c@f9967000 {
+ status = "disable";
+ compatible = "qcom,i2c-qup-v2.1.1";
+ reg = <0xf9967000 0x1000>;
+ interrupts = <0 105 IRQ_TYPE_NONE>;
+ clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
};
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index d8ec505..fba39a2 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -165,7 +165,7 @@
};
thermal@e61f0000 {
- compatible = "renesas,rcar-thermal";
+ compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
<0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 58d0d95..05b68f4 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -199,7 +199,6 @@
scif0: serial@ffe40000 {
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe40000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg_clocks R8A7779_CLK_P>;
clock-names = "sci_ick";
@@ -209,7 +208,6 @@
scif1: serial@ffe41000 {
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe41000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg_clocks R8A7779_CLK_P>;
clock-names = "sci_ick";
@@ -219,7 +217,6 @@
scif2: serial@ffe42000 {
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe42000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg_clocks R8A7779_CLK_P>;
clock-names = "sci_ick";
@@ -229,7 +226,6 @@
scif3: serial@ffe43000 {
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe43000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg_clocks R8A7779_CLK_P>;
clock-names = "sci_ick";
@@ -239,7 +235,6 @@
scif4: serial@ffe44000 {
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe44000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg_clocks R8A7779_CLK_P>;
clock-names = "sci_ick";
@@ -249,7 +244,6 @@
scif5: serial@ffe45000 {
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe45000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg_clocks R8A7779_CLK_P>;
clock-names = "sci_ick";
@@ -262,7 +256,7 @@
};
thermal@ffc48000 {
- compatible = "renesas,rcar-thermal";
+ compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
reg = <0xffc48000 0x38>;
};
@@ -404,10 +398,10 @@
/* Gate clocks */
mstp0_clks: clocks@ffc80030 {
compatible = "renesas,r8a7779-mstp-clocks",
- "renesas,cpg-mstp-clocks";
+ "renesas,cpg-mstp-clocks";
reg = <0xffc80030 4>;
clocks = <&cpg_clocks R8A7779_CLK_S>,
- <&cpg_clocks R8A7779_CLK_P>,
+ <&cpg_clocks R8A7779_CLK_P>,
<&cpg_clocks R8A7779_CLK_P>,
<&cpg_clocks R8A7779_CLK_P>,
<&cpg_clocks R8A7779_CLK_S>,
@@ -441,7 +435,7 @@
};
mstp1_clks: clocks@ffc80034 {
compatible = "renesas,r8a7779-mstp-clocks",
- "renesas,cpg-mstp-clocks";
+ "renesas,cpg-mstp-clocks";
reg = <0xffc80034 4>, <0xffc80044 4>;
clocks = <&cpg_clocks R8A7779_CLK_P>,
<&cpg_clocks R8A7779_CLK_P>,
@@ -470,7 +464,7 @@
};
mstp3_clks: clocks@ffc8003c {
compatible = "renesas,r8a7779-mstp-clocks",
- "renesas,cpg-mstp-clocks";
+ "renesas,cpg-mstp-clocks";
reg = <0xffc8003c 4>;
clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>,
<&s4_clk>, <&s4_clk>;
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index e3db105..2a6587b 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -32,7 +32,7 @@
reg = <0 0x40000000 0 0x40000000>;
};
- memory@180000000 {
+ memory@140000000 {
device_type = "memory";
reg = <1 0x40000000 0 0xc0000000>;
};
@@ -234,6 +234,11 @@
renesas,groups = "usb2";
renesas,function = "usb2";
};
+
+ vin1_pins: vin {
+ renesas,groups = "vin1_data8", "vin1_clk";
+ renesas,function = "vin1";
+ };
};
ðer {
@@ -366,6 +371,19 @@
status = "ok";
pinctrl-0 = <&iic2_pins>;
pinctrl-names = "default";
+
+ composite-in@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ remote = <&vin1>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin1ep0>;
+ };
+ };
+ };
};
&iic3 {
@@ -401,3 +419,21 @@
pinctrl-0 = <&usb2_pins>;
pinctrl-names = "default";
};
+
+/* composite video input */
+&vin1 {
+ pinctrl-0 = <&vin1_pins>;
+ pinctrl-names = "default";
+
+ status = "ok";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin1ep0: endpoint {
+ remote-endpoint = <&adv7180>;
+ bus-width = <8>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index d9ddecb..4b6915a 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -33,6 +33,10 @@
spi2 = &msiof1;
spi3 = &msiof2;
spi4 = &msiof3;
+ vin0 = &vin0;
+ vin1 = &vin1;
+ vin2 = &vin2;
+ vin3 = &vin3;
};
cpus {
@@ -217,6 +221,65 @@
<0 3 IRQ_TYPE_LEVEL_HIGH>;
};
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x20000>;
+ interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+ 0 200 IRQ_TYPE_LEVEL_HIGH
+ 0 201 IRQ_TYPE_LEVEL_HIGH
+ 0 202 IRQ_TYPE_LEVEL_HIGH
+ 0 203 IRQ_TYPE_LEVEL_HIGH
+ 0 204 IRQ_TYPE_LEVEL_HIGH
+ 0 205 IRQ_TYPE_LEVEL_HIGH
+ 0 206 IRQ_TYPE_LEVEL_HIGH
+ 0 207 IRQ_TYPE_LEVEL_HIGH
+ 0 208 IRQ_TYPE_LEVEL_HIGH
+ 0 209 IRQ_TYPE_LEVEL_HIGH
+ 0 210 IRQ_TYPE_LEVEL_HIGH
+ 0 211 IRQ_TYPE_LEVEL_HIGH
+ 0 212 IRQ_TYPE_LEVEL_HIGH
+ 0 213 IRQ_TYPE_LEVEL_HIGH
+ 0 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
+ clock-names = "fck";
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ dmac1: dma-controller@e6720000 {
+ compatible = "renesas,rcar-dmac";
+ reg = <0 0xe6720000 0 0x20000>;
+ interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+ 0 216 IRQ_TYPE_LEVEL_HIGH
+ 0 217 IRQ_TYPE_LEVEL_HIGH
+ 0 218 IRQ_TYPE_LEVEL_HIGH
+ 0 219 IRQ_TYPE_LEVEL_HIGH
+ 0 308 IRQ_TYPE_LEVEL_HIGH
+ 0 309 IRQ_TYPE_LEVEL_HIGH
+ 0 310 IRQ_TYPE_LEVEL_HIGH
+ 0 311 IRQ_TYPE_LEVEL_HIGH
+ 0 312 IRQ_TYPE_LEVEL_HIGH
+ 0 313 IRQ_TYPE_LEVEL_HIGH
+ 0 314 IRQ_TYPE_LEVEL_HIGH
+ 0 315 IRQ_TYPE_LEVEL_HIGH
+ 0 316 IRQ_TYPE_LEVEL_HIGH
+ 0 317 IRQ_TYPE_LEVEL_HIGH
+ 0 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
+ clock-names = "fck";
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
i2c0: i2c@e6508000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -473,6 +536,38 @@
status = "disabled";
};
+ vin0: video@e6ef0000 {
+ compatible = "renesas,vin-r8a7790";
+ clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
+ reg = <0 0xe6ef0000 0 0x1000>;
+ interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ vin1: video@e6ef1000 {
+ compatible = "renesas,vin-r8a7790";
+ clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
+ reg = <0 0xe6ef1000 0 0x1000>;
+ interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ vin2: video@e6ef2000 {
+ compatible = "renesas,vin-r8a7790";
+ clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
+ reg = <0 0xe6ef2000 0 0x1000>;
+ interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ vin3: video@e6ef3000 {
+ compatible = "renesas,vin-r8a7790";
+ clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
+ reg = <0 0xe6ef3000 0 0x1000>;
+ interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
@@ -741,33 +836,36 @@
mstp1_clks: mstp1_clks@e6150134 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
- clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
+ clocks = <&m2_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
<&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>,
<&zs_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
- R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2
+ R8A7790_CLK_JPU R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2
R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1
R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S
>;
clock-output-names =
- "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
+ "jpu", "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
"vsp1-du0", "vsp1-rt", "vsp1-sy";
};
mstp2_clks: mstp2_clks@e6150138 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
- <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>;
+ <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&zs_clk>,
+ <&zs_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7790_CLK_SCIFA2 R8A7790_CLK_SCIFA1 R8A7790_CLK_SCIFA0
R8A7790_CLK_MSIOF2 R8A7790_CLK_SCIFB0 R8A7790_CLK_SCIFB1
R8A7790_CLK_MSIOF1 R8A7790_CLK_MSIOF3 R8A7790_CLK_SCIFB2
+ R8A7790_CLK_SYS_DMAC1 R8A7790_CLK_SYS_DMAC0
>;
clock-output-names =
"scifa2", "scifa1", "scifa0", "msiof2", "scifb0",
- "scifb1", "msiof1", "msiof3", "scifb2";
+ "scifb1", "msiof1", "msiof3", "scifb2",
+ "sys-dmac1", "sys-dmac0";
};
mstp3_clks: mstp3_clks@e615013c {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -884,6 +982,8 @@
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>;
+ dma-names = "tx", "rx";
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -892,9 +992,11 @@
msiof0: spi@e6e20000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6e20000 0 0x0064>;
+ reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>;
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
+ dmas = <&dmac0 0x51>, <&dmac0 0x52>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -902,9 +1004,11 @@
msiof1: spi@e6e10000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6e10000 0 0x0064>;
+ reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>;
interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
+ dmas = <&dmac0 0x55>, <&dmac0 0x56>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -912,9 +1016,11 @@
msiof2: spi@e6e00000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6e00000 0 0x0064>;
+ reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>;
interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
+ dmas = <&dmac0 0x41>, <&dmac0 0x42>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -922,9 +1028,11 @@
msiof3: spi@e6c90000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6c90000 0 0x0064>;
+ reg = <0 0xe6c90000 0 0x0064>, <0 0xe7c90000 0 0x0064>;
interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
+ dmas = <&dmac0 0x45>, <&dmac0 0x46>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1018,7 +1126,6 @@
rcar_sound: rcar_sound@0xec500000 {
#sound-dai-cells = <1>;
compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2", "renesas,rcar_sound";
- interrupt-parent = <&gic>;
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts
index 3a2ef0a..f1b56de1 100644
--- a/arch/arm/boot/dts/r8a7791-henninger.dts
+++ b/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -135,6 +135,11 @@
renesas,groups = "usb1";
renesas,function = "usb1";
};
+
+ vin0_pins: vin0 {
+ renesas,groups = "vin0_data8", "vin0_clk";
+ renesas,function = "vin0";
+ };
};
&scif0 {
@@ -191,6 +196,19 @@
status = "okay";
clock-frequency = <400000>;
+
+ composite-in@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ remote = <&vin0>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin0ep>;
+ };
+ };
+ };
};
&qspi {
@@ -260,3 +278,20 @@
&pciec {
status = "okay";
};
+
+/* composite video input */
+&vin0 {
+ status = "ok";
+ pinctrl-0 = <&vin0_pins>;
+ pinctrl-names = "default";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin0ep: endpoint {
+ remote-endpoint = <&adv7180>;
+ bus-width = <8>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index be29711..98541c3 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -284,6 +284,11 @@
renesas,groups = "usb1";
renesas,function = "usb1";
};
+
+ vin1_pins: vin1 {
+ renesas,groups = "vin1_data8", "vin1_clk";
+ renesas,function = "vin1";
+ };
};
ðer {
@@ -407,6 +412,19 @@
status = "okay";
clock-frequency = <400000>;
+ composite-in@20 {
+ compatible = "adi,adv7180";
+ reg = <0x20>;
+ remote = <&vin1>;
+
+ port {
+ adv7180: endpoint {
+ bus-width = <8>;
+ remote-endpoint = <&vin1ep>;
+ };
+ };
+ };
+
eeprom@50 {
compatible = "renesas,24c02";
reg = <0x50>;
@@ -452,3 +470,20 @@
&cpu0 {
cpu0-supply = <&vdd_dvfs>;
};
+
+/* composite video input */
+&vin1 {
+ status = "ok";
+ pinctrl-0 = <&vin1_pins>;
+ pinctrl-names = "default";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin1ep: endpoint {
+ remote-endpoint = <&adv7180>;
+ bus-width = <8>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 0d82a4b3..9ee1d41 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -34,6 +34,9 @@
spi1 = &msiof0;
spi2 = &msiof1;
spi3 = &msiof2;
+ vin0 = &vin0;
+ vin1 = &vin1;
+ vin2 = &vin2;
};
cpus {
@@ -206,6 +209,66 @@
<0 17 IRQ_TYPE_LEVEL_HIGH>;
};
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x20000>;
+ interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+ 0 200 IRQ_TYPE_LEVEL_HIGH
+ 0 201 IRQ_TYPE_LEVEL_HIGH
+ 0 202 IRQ_TYPE_LEVEL_HIGH
+ 0 203 IRQ_TYPE_LEVEL_HIGH
+ 0 204 IRQ_TYPE_LEVEL_HIGH
+ 0 205 IRQ_TYPE_LEVEL_HIGH
+ 0 206 IRQ_TYPE_LEVEL_HIGH
+ 0 207 IRQ_TYPE_LEVEL_HIGH
+ 0 208 IRQ_TYPE_LEVEL_HIGH
+ 0 209 IRQ_TYPE_LEVEL_HIGH
+ 0 210 IRQ_TYPE_LEVEL_HIGH
+ 0 211 IRQ_TYPE_LEVEL_HIGH
+ 0 212 IRQ_TYPE_LEVEL_HIGH
+ 0 213 IRQ_TYPE_LEVEL_HIGH
+ 0 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC0>;
+ clock-names = "fck";
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ dmac1: dma-controller@e6720000 {
+ compatible = "renesas,rcar-dmac";
+ reg = <0 0xe6720000 0 0x20000>;
+ interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+ 0 216 IRQ_TYPE_LEVEL_HIGH
+ 0 217 IRQ_TYPE_LEVEL_HIGH
+ 0 218 IRQ_TYPE_LEVEL_HIGH
+ 0 219 IRQ_TYPE_LEVEL_HIGH
+ 0 308 IRQ_TYPE_LEVEL_HIGH
+ 0 309 IRQ_TYPE_LEVEL_HIGH
+ 0 310 IRQ_TYPE_LEVEL_HIGH
+ 0 311 IRQ_TYPE_LEVEL_HIGH
+ 0 312 IRQ_TYPE_LEVEL_HIGH
+ 0 313 IRQ_TYPE_LEVEL_HIGH
+ 0 314 IRQ_TYPE_LEVEL_HIGH
+ 0 315 IRQ_TYPE_LEVEL_HIGH
+ 0 316 IRQ_TYPE_LEVEL_HIGH
+ 0 317 IRQ_TYPE_LEVEL_HIGH
+ 0 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7791_CLK_SYS_DMAC1>;
+ clock-names = "fck";
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
/* The memory map in the User's Manual maps the cores to bus numbers */
i2c0: i2c@e6508000 {
#address-cells = <1>;
@@ -518,6 +581,30 @@
status = "disabled";
};
+ vin0: video@e6ef0000 {
+ compatible = "renesas,vin-r8a7791";
+ clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
+ reg = <0 0xe6ef0000 0 0x1000>;
+ interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ vin1: video@e6ef1000 {
+ compatible = "renesas,vin-r8a7791";
+ clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
+ reg = <0 0xe6ef1000 0 0x1000>;
+ interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ vin2: video@e6ef2000 {
+ compatible = "renesas,vin-r8a7791";
+ clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
+ reg = <0 0xe6ef2000 0 0x1000>;
+ interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
@@ -770,16 +857,16 @@
mstp1_clks: mstp1_clks@e6150134 {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
- clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
+ clocks = <&m2_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
<&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
- R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2
+ R8A7791_CLK_JPU R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2
R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1
R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S
>;
clock-output-names =
- "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
+ "jpu", "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
"vsp1-du0", "vsp1-sy";
};
mstp2_clks: mstp2_clks@e6150138 {
@@ -925,6 +1012,8 @@
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>;
+ dma-names = "tx", "rx";
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
@@ -933,9 +1022,11 @@
msiof0: spi@e6e20000 {
compatible = "renesas,msiof-r8a7791";
- reg = <0 0xe6e20000 0 0x0064>;
+ reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>;
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
+ dmas = <&dmac0 0x51>, <&dmac0 0x52>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -943,9 +1034,11 @@
msiof1: spi@e6e10000 {
compatible = "renesas,msiof-r8a7791";
- reg = <0 0xe6e10000 0 0x0064>;
+ reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>;
interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
+ dmas = <&dmac0 0x55>, <&dmac0 0x56>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -953,9 +1046,11 @@
msiof2: spi@e6e00000 {
compatible = "renesas,msiof-r8a7791";
- reg = <0 0xe6e00000 0 0x0064>;
+ reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>;
interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
+ dmas = <&dmac0 0x41>, <&dmac0 0x42>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1029,7 +1124,6 @@
rcar_sound: rcar_sound@0xec500000 {
#sound-dai-cells = <1>;
compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2", "renesas,rcar_sound";
- interrupt-parent = <&gic>;
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
new file mode 100644
index 0000000..79d06ef0
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -0,0 +1,47 @@
+/*
+ * Device Tree Source for the Alt board
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7794.dtsi"
+
+/ {
+ model = "Alt";
+ compatible = "renesas,alt", "renesas,r8a7794";
+
+ aliases {
+ serial0 = &scif2;
+ };
+
+ chosen {
+ bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x40000000>;
+ };
+
+ lbsc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <20000000>;
+};
+
+&cmt0 {
+ status = "ok";
+};
+
+&scif2 {
+ status = "ok";
+};
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
new file mode 100644
index 0000000..d4e8bce
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -0,0 +1,531 @@
+/*
+ * Device Tree Source for the r8a7794 SoC
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2014 Ulrich Hecht
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/r8a7794-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ compatible = "renesas,r8a7794";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0>;
+ clock-frequency = <1000000000>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <1>;
+ clock-frequency = <1000000000>;
+ };
+ };
+
+ gic: interrupt-controller@f1001000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0xf1001000 0 0x1000>,
+ <0 0xf1002000 0 0x1000>,
+ <0 0xf1004000 0 0x2000>,
+ <0 0xf1006000 0 0x2000>;
+ interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ cmt0: timer@ffca0000 {
+ compatible = "renesas,cmt-48-gen2";
+ reg = <0 0xffca0000 0 0x1004>;
+ interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
+ <0 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7794_CLK_CMT0>;
+ clock-names = "fck";
+
+ renesas,channels-mask = <0x60>;
+
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,cmt-48-gen2";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0 121 IRQ_TYPE_LEVEL_HIGH>,
+ <0 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 126 IRQ_TYPE_LEVEL_HIGH>,
+ <0 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7794_CLK_CMT1>;
+ clock-names = "fck";
+
+ renesas,channels-mask = <0xff>;
+
+ status = "disabled";
+ };
+
+ irqc0: interrupt-controller@e61c0000 {
+ compatible = "renesas,irqc-r8a7794", "renesas,irqc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0 0xe61c0000 0 0x200>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 15 IRQ_TYPE_LEVEL_HIGH>,
+ <0 16 IRQ_TYPE_LEVEL_HIGH>,
+ <0 17 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ scifa0: serial@e6c40000 {
+ compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ reg = <0 0xe6c40000 0 64>;
+ interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifa1: serial@e6c50000 {
+ compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ reg = <0 0xe6c50000 0 64>;
+ interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifa2: serial@e6c60000 {
+ compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ reg = <0 0xe6c60000 0 64>;
+ interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifa3: serial@e6c70000 {
+ compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ reg = <0 0xe6c70000 0 64>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifa4: serial@e6c78000 {
+ compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ reg = <0 0xe6c78000 0 64>;
+ interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifa5: serial@e6c80000 {
+ compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ reg = <0 0xe6c80000 0 64>;
+ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifb0: serial@e6c20000 {
+ compatible = "renesas,scifb-r8a7794", "renesas,scifb";
+ reg = <0 0xe6c20000 0 64>;
+ interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifb1: serial@e6c30000 {
+ compatible = "renesas,scifb-r8a7794", "renesas,scifb";
+ reg = <0 0xe6c30000 0 64>;
+ interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scifb2: serial@e6ce0000 {
+ compatible = "renesas,scifb-r8a7794", "renesas,scifb";
+ reg = <0 0xe6ce0000 0 64>;
+ interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a7794", "renesas,scif";
+ reg = <0 0xe6e60000 0 64>;
+ interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF0>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a7794", "renesas,scif";
+ reg = <0 0xe6e68000 0 64>;
+ interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF1>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif2: serial@e6e58000 {
+ compatible = "renesas,scif-r8a7794", "renesas,scif";
+ reg = <0 0xe6e58000 0 64>;
+ interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF2>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif3: serial@e6ea8000 {
+ compatible = "renesas,scif-r8a7794", "renesas,scif";
+ reg = <0 0xe6ea8000 0 64>;
+ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF3>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif4: serial@e6ee0000 {
+ compatible = "renesas,scif-r8a7794", "renesas,scif";
+ reg = <0 0xe6ee0000 0 64>;
+ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF4>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ scif5: serial@e6ee8000 {
+ compatible = "renesas,scif-r8a7794", "renesas,scif";
+ reg = <0 0xe6ee8000 0 64>;
+ interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF5>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ hscif0: serial@e62c0000 {
+ compatible = "renesas,hscif-r8a7794", "renesas,hscif";
+ reg = <0 0xe62c0000 0 96>;
+ interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ hscif1: serial@e62c8000 {
+ compatible = "renesas,hscif-r8a7794", "renesas,hscif";
+ reg = <0 0xe62c8000 0 96>;
+ interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ hscif2: serial@e62d0000 {
+ compatible = "renesas,hscif-r8a7794", "renesas,hscif";
+ reg = <0 0xe62d0000 0 96>;
+ interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>;
+ clock-names = "sci_ick";
+ status = "disabled";
+ };
+
+ clocks {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* External root clock */
+ extal_clk: extal_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overriden by the board. */
+ clock-frequency = <0>;
+ clock-output-names = "extal";
+ };
+
+ /* Special CPG clocks */
+ cpg_clocks: cpg_clocks@e6150000 {
+ compatible = "renesas,r8a7794-cpg-clocks",
+ "renesas,rcar-gen2-cpg-clocks";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>;
+ #clock-cells = <1>;
+ clock-output-names = "main", "pll0", "pll1", "pll3",
+ "lb", "qspi", "sdh", "sd0", "z";
+ };
+
+ /* Fixed factor clocks */
+ pll1_div2_clk: pll1_div2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "pll1_div2";
+ };
+ zg_clk: zg_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <6>;
+ clock-mult = <1>;
+ clock-output-names = "zg";
+ };
+ zx_clk: zx_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <3>;
+ clock-mult = <1>;
+ clock-output-names = "zx";
+ };
+ zs_clk: zs_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <6>;
+ clock-mult = <1>;
+ clock-output-names = "zs";
+ };
+ hp_clk: hp_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <12>;
+ clock-mult = <1>;
+ clock-output-names = "hp";
+ };
+ i_clk: i_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "i";
+ };
+ b_clk: b_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <12>;
+ clock-mult = <1>;
+ clock-output-names = "b";
+ };
+ p_clk: p_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <24>;
+ clock-mult = <1>;
+ clock-output-names = "p";
+ };
+ cl_clk: cl_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <48>;
+ clock-mult = <1>;
+ clock-output-names = "cl";
+ };
+ m2_clk: m2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ clock-output-names = "m2";
+ };
+ imp_clk: imp_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ clock-output-names = "imp";
+ };
+ rclk_clk: rclk_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <(48 * 1024)>;
+ clock-mult = <1>;
+ clock-output-names = "rclk";
+ };
+ oscclk_clk: oscclk_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <(12 * 1024)>;
+ clock-mult = <1>;
+ clock-output-names = "oscclk";
+ };
+ zb3_clk: zb3_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL3>;
+ #clock-cells = <0>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ clock-output-names = "zb3";
+ };
+ zb3d2_clk: zb3d2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL3>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ clock-output-names = "zb3d2";
+ };
+ ddr_clk: ddr_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL3>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ clock-output-names = "ddr";
+ };
+ mp_clk: mp_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&pll1_div2_clk>;
+ #clock-cells = <0>;
+ clock-div = <15>;
+ clock-mult = <1>;
+ clock-output-names = "mp";
+ };
+ cp_clk: cp_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <48>;
+ clock-mult = <1>;
+ clock-output-names = "cp";
+ };
+
+ acp_clk: acp_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&extal_clk>;
+ #clock-cells = <0>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ clock-output-names = "acp";
+ };
+
+ /* Gate clocks */
+ mstp0_clks: mstp0_clks@e6150130 {
+ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
+ clocks = <&mp_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <R8A7794_CLK_MSIOF0>;
+ clock-output-names = "msiof0";
+ };
+ mstp1_clks: mstp1_clks@e6150134 {
+ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
+ clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
+ <&cp_clk>,
+ <&zs_clk>, <&zs_clk>, <&zs_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7794_CLK_TMU1 R8A7794_CLK_TMU3 R8A7794_CLK_TMU2
+ R8A7794_CLK_CMT0 R8A7794_CLK_TMU0
+ >;
+ clock-output-names =
+ "tmu1", "tmu3", "tmu2", "cmt0", "tmu0";
+ };
+ mstp2_clks: mstp2_clks@e6150138 {
+ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+ clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
+ <&mp_clk>, <&mp_clk>, <&mp_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7794_CLK_SCIFA2 R8A7794_CLK_SCIFA1 R8A7794_CLK_SCIFA0
+ R8A7794_CLK_MSIOF2 R8A7794_CLK_SCIFB0 R8A7794_CLK_SCIFB1
+ R8A7794_CLK_MSIOF1 R8A7794_CLK_SCIFB2
+ >;
+ clock-output-names =
+ "scifa2", "scifa1", "scifa0", "msiof2", "scifb0",
+ "scifb1", "msiof1", "scifb2";
+ };
+ mstp3_clks: mstp3_clks@e615013c {
+ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
+ clocks = <&rclk_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7794_CLK_CMT1
+ >;
+ clock-output-names =
+ "cmt1";
+ };
+ mstp7_clks: mstp7_clks@e615014c {
+ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
+ clocks = <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
+ <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5
+ R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0
+ R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1
+ R8A7794_CLK_SCIF0
+ >;
+ clock-output-names =
+ "hscif2", "scif5", "scif4", "hscif1", "hscif0",
+ "scif3", "scif2", "scif1", "scif0";
+ };
+ mstp8_clks: mstp8_clks@e6150990 {
+ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
+ clocks = <&p_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7794_CLK_ETHER
+ >;
+ clock-output-names =
+ "ether";
+ };
+ mstp11_clks: mstp11_clks@e615099c {
+ compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
+ clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>;
+ #clock-cells = <1>;
+ renesas,clock-indices = <
+ R8A7794_CLK_SCIFA3 R8A7794_CLK_SCIFA4 R8A7794_CLK_SCIFA5
+ >;
+ clock-output-names = "scifa3", "scifa4", "scifa5";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index c9d912d..d534451 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -152,12 +152,8 @@
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
vmmc-supply = <&vcc_sd0>;
-
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- disable-wp;
- };
+ bus-width = <4>;
+ disable-wp;
};
&mmc1 { /* wifi */
@@ -168,11 +164,8 @@
pinctrl-names = "default";
pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- disable-wp;
- };
+ bus-width = <4>;
+ disable-wp;
};
&uart0 {
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 879a818..ad9c2db 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -179,6 +179,27 @@
bias-disable;
};
+ emmc {
+ emmc_clk: emmc-clk {
+ rockchip,pins = <RK_GPIO3 31 RK_FUNC_2 &pcfg_pull_default>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins = <RK_GPIO4 9 RK_FUNC_2 &pcfg_pull_default>;
+ };
+
+ emmc_rst: emmc-rst {
+ rockchip,pins = <RK_GPIO4 10 RK_FUNC_2 &pcfg_pull_default>;
+ };
+
+ /*
+ * The data pins are shared between nandc and emmc and
+ * not accessible through pinctrl. Also they should've
+ * been already set correctly by firmware, as
+ * flash/emmc is the boot-device.
+ */
+ };
+
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins = <RK_GPIO2 28 RK_FUNC_1 &pcfg_pull_none>,
@@ -238,6 +259,42 @@
};
};
+ spi0 {
+ spi0_clk: spi0-clk {
+ rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_default>;
+ };
+ spi0_cs0: spi0-cs0 {
+ rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_default>;
+ };
+ spi0_tx: spi0-tx {
+ rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_default>;
+ };
+ spi0_rx: spi0-rx {
+ rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_default>;
+ };
+ spi0_cs1: spi0-cs1 {
+ rockchip,pins = <RK_GPIO4 15 RK_FUNC_1 &pcfg_pull_default>;
+ };
+ };
+
+ spi1 {
+ spi1_clk: spi1-clk {
+ rockchip,pins = <RK_GPIO2 19 RK_FUNC_2 &pcfg_pull_default>;
+ };
+ spi1_cs0: spi1-cs0 {
+ rockchip,pins = <RK_GPIO2 20 RK_FUNC_2 &pcfg_pull_default>;
+ };
+ spi1_rx: spi1-rx {
+ rockchip,pins = <RK_GPIO2 22 RK_FUNC_2 &pcfg_pull_default>;
+ };
+ spi1_tx: spi1-tx {
+ rockchip,pins = <RK_GPIO2 21 RK_FUNC_2 &pcfg_pull_default>;
+ };
+ spi1_cs1: spi1-cs1 {
+ rockchip,pins = <RK_GPIO2 23 RK_FUNC_2 &pcfg_pull_default>;
+ };
+ };
+
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
@@ -406,6 +463,16 @@
pinctrl-0 = <&pwm3_out>;
};
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>;
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 5e4e3c23..39f66e3 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -65,6 +65,19 @@
pinctrl-0 = <&ir_recv_pin>;
};
+ vcc_otg: usb-otg-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&otg_vbus_drv>;
+ regulator-name = "otg-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
vcc_sd0: sdmmc-regulator {
compatible = "regulator-fixed";
regulator-name = "sdmmc-supply";
@@ -74,12 +87,36 @@
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
+
+ vcc_host: usb-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_vbus_drv>;
+ regulator-name = "host-pwr";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
+ rtc@51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_int>;
+ #clock-cells = <0>;
+ clock-output-names = "xin32k";
+ };
+
act8846: act8846@5a {
compatible = "active-semi,act8846";
reg = <0x5a>;
@@ -149,7 +186,6 @@
regulator-name = "VCC_RMII";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-always-on;
};
vccio_wl: REG10 {
@@ -183,11 +219,8 @@
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
vmmc-supply = <&vcc_sd0>;
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- disable-wp;
- };
+ bus-width = <4>;
+ disable-wp;
};
&pinctrl {
@@ -201,11 +234,26 @@
};
};
+ hym8563 {
+ rtc_int: rtc-int {
+ rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
ir-receiver {
ir_recv_pin: ir-recv-pin {
rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&uart0 {
@@ -224,6 +272,14 @@
status = "okay";
};
+&usb_host {
+ status = "okay";
+};
+
+&usb_otg {
+ status = "okay";
+};
+
&wdt {
status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index ee801a9..82732f5 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -147,6 +147,27 @@
bias-disable;
};
+ emmc {
+ emmc_clk: emmc-clk {
+ rockchip,pins = <RK_GPIO0 24 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins = <RK_GPIO0 26 RK_FUNC_2 &pcfg_pull_up>;
+ };
+
+ emmc_rst: emmc-rst {
+ rockchip,pins = <RK_GPIO0 27 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ /*
+ * The data pins are shared between nandc and emmc and
+ * not accessible through pinctrl. Also they should've
+ * been already set correctly by firmware, as
+ * flash/emmc is the boot-device.
+ */
+ };
+
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins = <RK_GPIO1 24 RK_FUNC_1 &pcfg_pull_none>,
@@ -206,6 +227,42 @@
};
};
+ spi0 {
+ spi0_clk: spi0-clk {
+ rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi0_cs0: spi0-cs0 {
+ rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi0_tx: spi0-tx {
+ rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi0_rx: spi0-rx {
+ rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi0_cs1: spi0-cs1 {
+ rockchip,pins = <RK_GPIO1 15 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
+ spi1 {
+ spi1_clk: spi1-clk {
+ rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi1_cs0: spi1-cs0 {
+ rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi1_rx: spi1-rx {
+ rockchip,pins = <RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi1_tx: spi1-tx {
+ rockchip,pins = <RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi1_cs1: spi1-cs1 {
+ rockchip,pins = <RK_GPIO1 14 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ };
+
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>,
@@ -381,6 +438,18 @@
pinctrl-0 = <&pwm3_out>;
};
+&spi0 {
+ compatible = "rockchip,rk3188-spi", "rockchip,rk3066-spi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+};
+
+&spi1 {
+ compatible = "rockchip,rk3188-spi", "rockchip,rk3066-spi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>;
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index 7d59ff4..a76dd44 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -26,7 +26,7 @@
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
- pinctrl-0 = <&hym8563_int>;
+ pinctrl-0 = <&pmic_int>;
#clock-cells = <0>;
clock-output-names = "xin32k";
@@ -124,11 +124,3 @@
};
};
};
-
-&pinctrl {
- hym8563 {
- hym8563_int: hym8563-int {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-};
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index 9a88b6c6..ff522f8 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -16,3 +16,135 @@
/ {
compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+
+ vcc8-supply = <&vcc_18>;
+ vcc9-supply = <&vcc_io>;
+ vcc10-supply = <&vcc_io>;
+ vcc12-supply = <&vcc_io>;
+ vddio-supply = <&vccio_pmu>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-name = "vdd_arm";
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd_gpu";
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ };
+
+ vccio_pmu: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_pmu";
+ };
+
+ vcc_tp: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_tp";
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ };
+
+ vcc18_lcd: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+ };
+
+ vdd10_lcd: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+ };
+
+ vcc_18: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_18";
+ };
+
+ vcca_codec: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcca_codec";
+ };
+
+ vcc_wl: SWITCH_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_wl";
+ };
+
+ vcc_lcd: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_lcd";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 4f57209..cb83cea 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -10,6 +10,7 @@
* GNU General Public License for more details.
*/
+#include <dt-bindings/pwm/pwm.h>
#include "rk3288.dtsi"
/ {
@@ -17,6 +18,48 @@
reg = <0x0 0x80000000>;
};
+ backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7
+ 8 9 10 11 12 13 14 15
+ 16 17 18 19 20 21 22 23
+ 24 25 26 27 28 29 30 31
+ 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47
+ 48 49 50 51 52 53 54 55
+ 56 57 58 59 60 61 62 63
+ 64 65 66 67 68 69 70 71
+ 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87
+ 88 89 90 91 92 93 94 95
+ 96 97 98 99 100 101 102 103
+ 104 105 106 107 108 109 110 111
+ 112 113 114 115 116 117 118 119
+ 120 121 122 123 124 125 126 127
+ 128 129 130 131 132 133 134 135
+ 136 137 138 139 140 141 142 143
+ 144 145 146 147 148 149 150 151
+ 152 153 154 155 156 157 158 159
+ 160 161 162 163 164 165 166 167
+ 168 169 170 171 172 173 174 175
+ 176 177 178 179 180 181 182 183
+ 184 185 186 187 188 189 190 191
+ 192 193 194 195 196 197 198 199
+ 200 201 202 203 204 205 206 207
+ 208 209 210 211 212 213 214 215
+ 216 217 218 219 220 221 222 223
+ 224 225 226 227 228 229 230 231
+ 232 233 234 235 236 237 238 239
+ 240 241 242 243 244 245 246 247
+ 248 249 250 251 252 253 254 255>;
+ default-brightness-level = <128>;
+ enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bl_en>;
+ pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
+ };
+
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
@@ -49,6 +92,30 @@
};
};
+&emmc {
+ broken-cd;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ disable-wp;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ disable-wp; /* wp not hooked up */
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
};
@@ -57,6 +124,10 @@
status = "okay";
};
+&pwm0 {
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
@@ -78,12 +149,24 @@
};
&pinctrl {
+ backlight {
+ bl_en: bl-en {
+ rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
buttons {
pwrbtn: pwrbtn {
rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
usb {
host_vbus_drv: host-vbus-drv {
rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -94,3 +177,7 @@
&usb_host0_ehci {
status = "okay";
};
+
+&usb_host1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 5950b0a..be276bd 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -29,11 +29,18 @@
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
+ mshc0 = &emmc;
+ mshc1 = &sdmmc;
+ mshc2 = &sdio0;
+ mshc3 = &sdio1;
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
serial3 = &uart3;
serial4 = &uart4;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ spi2 = &spi2;
};
cpus {
@@ -62,6 +69,44 @@
};
};
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dmac_peri: dma-controller@ff250000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xff250000 0x4000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&cru ACLK_DMAC2>;
+ clock-names = "apb_pclk";
+ };
+
+ dmac_bus_ns: dma-controller@ff600000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xff600000 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&cru ACLK_DMAC1>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ dmac_bus_s: dma-controller@ffb20000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xffb20000 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&cru ACLK_DMAC1>;
+ clock-names = "apb_pclk";
+ };
+ };
+
xin24m: oscillator {
compatible = "fixed-clock";
clock-frequency = <24000000>;
@@ -78,6 +123,95 @@
clock-frequency = <24000000>;
};
+ sdmmc: dwmmc@ff0c0000 {
+ compatible = "rockchip,rk3288-dw-mshc";
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xff0c0000 0x4000>;
+ status = "disabled";
+ };
+
+ sdio0: dwmmc@ff0d0000 {
+ compatible = "rockchip,rk3288-dw-mshc";
+ clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xff0d0000 0x4000>;
+ status = "disabled";
+ };
+
+ sdio1: dwmmc@ff0e0000 {
+ compatible = "rockchip,rk3288-dw-mshc";
+ clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xff0e0000 0x4000>;
+ status = "disabled";
+ };
+
+ emmc: dwmmc@ff0f0000 {
+ compatible = "rockchip,rk3288-dw-mshc";
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xff0f0000 0x4000>;
+ status = "disabled";
+ };
+
+ saradc: saradc@ff100000 {
+ compatible = "rockchip,saradc";
+ reg = <0xff100000 0x100>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ #io-channel-cells = <1>;
+ clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+ clock-names = "saradc", "apb_pclk";
+ status = "disabled";
+ };
+
+ spi0: spi@ff110000 {
+ compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
+ clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
+ reg = <0xff110000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@ff120000 {
+ compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
+ clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
+ reg = <0xff120000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@ff130000 {
+ compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
+ clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
+ reg = <0xff130000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
i2c1: i2c@ff140000 {
compatible = "rockchip,rk3288-i2c";
reg = <0xff140000 0x1000>;
@@ -206,6 +340,26 @@
/* NOTE: ohci@ff520000 doesn't actually work on hardware */
+ usb_host1: usb@ff540000 {
+ compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0xff540000 0x40000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_USBHOST1>;
+ clock-names = "otg";
+ status = "disabled";
+ };
+
+ usb_otg: usb@ff580000 {
+ compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0xff580000 0x40000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG0>;
+ clock-names = "otg";
+ status = "disabled";
+ };
+
usb_hsic: usb@ff5c0000 {
compatible = "generic-ehci";
reg = <0xff5c0000 0x100>;
@@ -241,6 +395,50 @@
status = "disabled";
};
+ pwm0: pwm@ff680000 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0xff680000 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pwm1: pwm@ff680010 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0xff680010 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pwm2: pwm@ff680020 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0xff680020 0x10>;
+ #pwm-cells = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
+ pwm3: pwm@ff680030 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0xff680030 0x10>;
+ #pwm-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pin>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ status = "disabled";
+ };
+
pmu: power-management@ff730000 {
compatible = "rockchip,rk3288-pmu", "syscon";
reg = <0xff730000 0x100>;
@@ -488,6 +686,88 @@
};
};
+ sdio0 {
+ sdio0_bus1: sdio0-bus1 {
+ rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_bus4: sdio0-bus4 {
+ rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_up>,
+ <4 21 RK_FUNC_1 &pcfg_pull_up>,
+ <4 22 RK_FUNC_1 &pcfg_pull_up>,
+ <4 23 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_cmd: sdio0-cmd {
+ rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_clk: sdio0-clk {
+ rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ sdio0_cd: sdio0-cd {
+ rockchip,pins = <4 26 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_wp: sdio0-wp {
+ rockchip,pins = <4 27 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_pwr: sdio0-pwr {
+ rockchip,pins = <4 28 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_bkpwr: sdio0-bkpwr {
+ rockchip,pins = <4 29 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ sdio0_int: sdio0-int {
+ rockchip,pins = <4 30 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
+ sdio1 {
+ sdio1_bus1: sdio1-bus1 {
+ rockchip,pins = <3 24 4 &pcfg_pull_up>;
+ };
+
+ sdio1_bus4: sdio1-bus4 {
+ rockchip,pins = <3 24 4 &pcfg_pull_up>,
+ <3 25 4 &pcfg_pull_up>,
+ <3 26 4 &pcfg_pull_up>,
+ <3 27 4 &pcfg_pull_up>;
+ };
+
+ sdio1_cd: sdio1-cd {
+ rockchip,pins = <3 28 4 &pcfg_pull_up>;
+ };
+
+ sdio1_wp: sdio1-wp {
+ rockchip,pins = <3 29 4 &pcfg_pull_up>;
+ };
+
+ sdio1_bkpwr: sdio1-bkpwr {
+ rockchip,pins = <3 30 4 &pcfg_pull_up>;
+ };
+
+ sdio1_int: sdio1-int {
+ rockchip,pins = <3 31 4 &pcfg_pull_up>;
+ };
+
+ sdio1_cmd: sdio1-cmd {
+ rockchip,pins = <4 6 4 &pcfg_pull_up>;
+ };
+
+ sdio1_clk: sdio1-clk {
+ rockchip,pins = <4 7 4 &pcfg_pull_none>;
+ };
+
+ sdio1_pwr: sdio1-pwr {
+ rockchip,pins = <4 9 4 &pcfg_pull_up>;
+ };
+ };
+
emmc {
emmc_clk: emmc-clk {
rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none>;
@@ -524,6 +804,56 @@
};
};
+ spi0 {
+ spi0_clk: spi0-clk {
+ rockchip,pins = <5 12 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi0_cs0: spi0-cs0 {
+ rockchip,pins = <5 13 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi0_tx: spi0-tx {
+ rockchip,pins = <5 14 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi0_rx: spi0-rx {
+ rockchip,pins = <5 15 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi0_cs1: spi0-cs1 {
+ rockchip,pins = <5 16 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+ spi1 {
+ spi1_clk: spi1-clk {
+ rockchip,pins = <7 12 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi1_cs0: spi1-cs0 {
+ rockchip,pins = <7 13 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi1_rx: spi1-rx {
+ rockchip,pins = <7 14 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ spi1_tx: spi1-tx {
+ rockchip,pins = <7 15 RK_FUNC_2 &pcfg_pull_up>;
+ };
+ };
+
+ spi2 {
+ spi2_cs1: spi2-cs1 {
+ rockchip,pins = <8 3 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi2_clk: spi2-clk {
+ rockchip,pins = <8 6 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi2_cs0: spi2-cs0 {
+ rockchip,pins = <8 7 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi2_rx: spi2-rx {
+ rockchip,pins = <8 8 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ spi2_tx: spi2-tx {
+ rockchip,pins = <8 9 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins = <4 16 RK_FUNC_1 &pcfg_pull_up>,
@@ -591,5 +921,29 @@
rockchip,pins = <5 15 3 &pcfg_pull_none>;
};
};
+
+ pwm0 {
+ pwm0_pin: pwm0-pin {
+ rockchip,pins = <7 0 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin: pwm1-pin {
+ rockchip,pins = <7 1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm2 {
+ pwm2_pin: pwm2-pin {
+ rockchip,pins = <7 22 3 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3 {
+ pwm3_pin: pwm3-pin {
+ rockchip,pins = <7 23 3 &pcfg_pull_none>;
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index 8caf85d..7332d12 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -26,6 +26,49 @@
i2c2 = &i2c2;
i2c3 = &i2c3;
i2c4 = &i2c4;
+ mshc0 = &emmc;
+ mshc1 = &mmc0;
+ mshc2 = &mmc1;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ dmac1_s: dma-controller@20018000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x20018000 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&cru ACLK_DMA1>;
+ clock-names = "apb_pclk";
+ };
+
+ dmac1_ns: dma-controller@2001c000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x2001c000 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&cru ACLK_DMA1>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ dmac2: dma-controller@20078000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x20078000 0x4000>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&cru ACLK_DMA2>;
+ clock-names = "apb_pclk";
+ };
};
xin24m: oscillator {
@@ -91,12 +134,28 @@
status = "disabled";
};
+ usb_otg: usb@10180000 {
+ compatible = "rockchip,rk3066-usb", "snps,dwc2";
+ reg = <0x10180000 0x40000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG0>;
+ clock-names = "otg";
+ status = "disabled";
+ };
+
+ usb_host: usb@101c0000 {
+ compatible = "snps,dwc2";
+ reg = <0x101c0000 0x40000>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG1>;
+ clock-names = "otg";
+ status = "disabled";
+ };
+
mmc0: dwmmc@10214000 {
compatible = "rockchip,rk2928-dw-mshc";
reg = <0x10214000 0x1000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
clock-names = "biu", "ciu";
@@ -108,8 +167,6 @@
compatible = "rockchip,rk2928-dw-mshc";
reg = <0x10218000 0x1000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>;
clock-names = "biu", "ciu";
@@ -117,6 +174,17 @@
status = "disabled";
};
+ emmc: dwmmc@1021c000 {
+ compatible = "rockchip,rk2928-dw-mshc";
+ reg = <0x1021c000 0x1000>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
+ clock-names = "biu", "ciu";
+
+ status = "disabled";
+ };
+
pmu: pmu@20004000 {
compatible = "rockchip,rk3066-pmu", "syscon";
reg = <0x20004000 0x100>;
@@ -135,7 +203,6 @@
#size-cells = <0>;
rockchip,grf = <&grf>;
- rockchip,bus-index = <0>;
clock-names = "i2c";
clocks = <&cru PCLK_I2C0>;
@@ -264,4 +331,36 @@
clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
status = "disabled";
};
+
+ saradc: saradc@2006c000 {
+ compatible = "rockchip,saradc";
+ reg = <0x2006c000 0x100>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ #io-channel-cells = <1>;
+ clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+ clock-names = "saradc", "apb_pclk";
+ status = "disabled";
+ };
+
+ spi0: spi@20070000 {
+ compatible = "rockchip,rk3066-spi";
+ clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x20070000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@20074000 {
+ compatible = "rockchip,rk3066-spi";
+ clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+ clock-names = "spiclk", "apb_pclk";
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x20074000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 45013b8..7702a0d 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -402,8 +402,10 @@
};
ramc0: ramc@ffffea00 {
- compatible = "atmel,at91sam9g45-ddramc";
+ compatible = "atmel,sama5d3-ddramc";
reg = <0xffffea00 0x200>;
+ clocks = <&ddrck>, <&mpddr_clk>;
+ clock-names = "ddrck", "mpddr";
};
dbgu: serial@ffffee00 {
@@ -1170,6 +1172,11 @@
#clock-cells = <0>;
reg = <48>;
};
+
+ mpddr_clk: mpddr_clk {
+ #clock-cells = <0>;
+ reg = <49>;
+ };
};
};
@@ -1178,6 +1185,11 @@
reg = <0xfffffe00 0x10>;
};
+ shutdown-controller@fffffe10 {
+ compatible = "atmel,at91sam9x5-shdwc";
+ reg = <0xfffffe10 0x10>;
+ };
+
pit: timer@fffffe30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe30 0xf>;
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index f7d8583..962dc28 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -36,6 +36,36 @@
macb0: ethernet@f0028000 {
phy-mode = "rgmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@1 {
+ reg = <0x1>;
+ interrupt-parent = <&pioB>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ txen-skew-ps = <800>;
+ txc-skew-ps = <3000>;
+ rxdv-skew-ps = <400>;
+ rxc-skew-ps = <3000>;
+ rxd0-skew-ps = <400>;
+ rxd1-skew-ps = <400>;
+ rxd2-skew-ps = <400>;
+ rxd3-skew-ps = <400>;
+ };
+
+ ethernet-phy@7 {
+ reg = <0x7>;
+ interrupt-parent = <&pioB>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ txen-skew-ps = <800>;
+ txc-skew-ps = <3000>;
+ rxdv-skew-ps = <400>;
+ rxc-skew-ps = <3000>;
+ rxd0-skew-ps = <400>;
+ rxd1-skew-ps = <400>;
+ rxd2-skew-ps = <400>;
+ rxd3-skew-ps = <400>;
+ };
};
pmc: pmc@fffffc00 {
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index 18662ae..477f815 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -66,7 +66,7 @@
};
vmmc_sdhi0: regulator@2 {
- compatible = "regulator-fixed";
+ compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -75,7 +75,7 @@
};
vmmc_sdhi2: regulator@3 {
- compatible = "regulator-fixed";
+ compatible = "regulator-fixed";
regulator-name = "SDHI2 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 910b790..c959355 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -14,6 +14,7 @@
/ {
compatible = "renesas,sh73a0";
+ interrupt-parent = <&gic>;
cpus {
#address-cells = <1>;
@@ -54,7 +55,6 @@
<0xe6900020 1>,
<0xe6900040 1>,
<0xe6900060 1>;
- interrupt-parent = <&gic>;
interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH
0 2 IRQ_TYPE_LEVEL_HIGH
0 3 IRQ_TYPE_LEVEL_HIGH
@@ -74,7 +74,6 @@
<0xe6900024 1>,
<0xe6900044 1>,
<0xe6900064 1>;
- interrupt-parent = <&gic>;
interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH
0 10 IRQ_TYPE_LEVEL_HIGH
0 11 IRQ_TYPE_LEVEL_HIGH
@@ -95,7 +94,6 @@
<0xe6900028 1>,
<0xe6900048 1>,
<0xe6900068 1>;
- interrupt-parent = <&gic>;
interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH
0 18 IRQ_TYPE_LEVEL_HIGH
0 19 IRQ_TYPE_LEVEL_HIGH
@@ -115,7 +113,6 @@
<0xe690002c 1>,
<0xe690004c 1>,
<0xe690006c 1>;
- interrupt-parent = <&gic>;
interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH
0 26 IRQ_TYPE_LEVEL_HIGH
0 27 IRQ_TYPE_LEVEL_HIGH
@@ -131,7 +128,6 @@
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6820000 0x425>;
- interrupt-parent = <&gic>;
interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH
0 168 IRQ_TYPE_LEVEL_HIGH
0 169 IRQ_TYPE_LEVEL_HIGH
@@ -144,7 +140,6 @@
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6822000 0x425>;
- interrupt-parent = <&gic>;
interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH
0 52 IRQ_TYPE_LEVEL_HIGH
0 53 IRQ_TYPE_LEVEL_HIGH
@@ -157,7 +152,6 @@
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6824000 0x425>;
- interrupt-parent = <&gic>;
interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH
0 172 IRQ_TYPE_LEVEL_HIGH
0 173 IRQ_TYPE_LEVEL_HIGH
@@ -170,7 +164,6 @@
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6826000 0x425>;
- interrupt-parent = <&gic>;
interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH
0 184 IRQ_TYPE_LEVEL_HIGH
0 185 IRQ_TYPE_LEVEL_HIGH
@@ -183,7 +176,6 @@
#size-cells = <0>;
compatible = "renesas,rmobile-iic";
reg = <0xe6828000 0x425>;
- interrupt-parent = <&gic>;
interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH
0 188 IRQ_TYPE_LEVEL_HIGH
0 189 IRQ_TYPE_LEVEL_HIGH
@@ -194,7 +186,6 @@
mmcif: mmc@e6bd0000 {
compatible = "renesas,sh-mmcif";
reg = <0xe6bd0000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH
0 141 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <4>;
@@ -204,7 +195,6 @@
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-sh73a0";
reg = <0xee100000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH
0 84 IRQ_TYPE_LEVEL_HIGH
0 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -216,7 +206,6 @@
sdhi1: sd@ee120000 {
compatible = "renesas,sdhi-sh73a0";
reg = <0xee120000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH
0 89 IRQ_TYPE_LEVEL_HIGH>;
toshiba,mmc-wrprotect-disable;
@@ -227,7 +216,6 @@
sdhi2: sd@ee140000 {
compatible = "renesas,sdhi-sh73a0";
reg = <0xee140000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH
0 105 IRQ_TYPE_LEVEL_HIGH>;
toshiba,mmc-wrprotect-disable;
@@ -238,7 +226,6 @@
scifa0: serial@e6c40000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c40000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -246,7 +233,6 @@
scifa1: serial@e6c50000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c50000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -254,7 +240,6 @@
scifa2: serial@e6c60000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c60000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -262,7 +247,6 @@
scifa3: serial@e6c70000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c70000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -270,7 +254,6 @@
scifa4: serial@e6c80000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c80000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -278,7 +261,6 @@
scifa5: serial@e6cb0000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6cb0000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -286,7 +268,6 @@
scifa6: serial@e6cc0000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6cc0000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -294,7 +275,6 @@
scifa7: serial@e6cd0000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6cd0000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -302,7 +282,6 @@
scifb8: serial@e6c30000 {
compatible = "renesas,scifb-sh73a0", "renesas,scifb";
reg = <0xe6c30000 0x100>;
- interrupt-parent = <&gic>;
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -328,7 +307,6 @@
#sound-dai-cells = <1>;
compatible = "renesas,sh_fsi2";
reg = <0xec230000 0x400>;
- interrupt-parent = <&gic>;
interrupts = <0 146 0x4>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 4d77ad6..45fce2c 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -607,6 +607,17 @@
};
};
+ sdr: sdr@ffc25000 {
+ compatible = "syscon";
+ reg = <0xffc25000 0x1000>;
+ };
+
+ sdramedac {
+ compatible = "altr,sdram-edac";
+ altr,sdr-syscon = <&sdr>;
+ interrupts = <0 39 4>;
+ };
+
L2: l2-cache@fffef000 {
compatible = "arm,pl310-cache";
reg = <0xfffef000 0x1000>;
diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi
index 12d1c2c..03e8268 100644
--- a/arch/arm/boot/dts/socfpga_arria5.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria5.dtsi
@@ -15,6 +15,8 @@
*/
/dts-v1/;
+/* First 4KB has trampoline code for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
#include "socfpga.dtsi"
/ {
@@ -29,13 +31,10 @@
dwmmc0@ff704000 {
num-slots = <1>;
- supports-highspeed;
broken-cd;
-
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- };
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
};
sysmgr@ffd08000 {
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index d532d17..27d551c 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -37,13 +37,6 @@
*/
ethernet0 = &gmac1;
};
-
- aliases {
- /* this allow the ethaddr uboot environmnet variable contents
- * to be added to the gmac1 device tree blob.
- */
- ethernet0 = &gmac1;
- };
};
&gmac1 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
index bf51182..28c05e7a3 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi
+++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
@@ -16,6 +16,8 @@
*/
/dts-v1/;
+/* First 4KB has trampoline code for secondary cores. */
+/memreserve/ 0x00000000 0x0001000;
#include "socfpga.dtsi"
/ {
@@ -28,15 +30,12 @@
};
};
- dwmmc0@ff704000 {
+ mmc0: dwmmc0@ff704000 {
num-slots = <1>;
- supports-highspeed;
broken-cd;
-
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- };
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
};
ethernet@ff702000 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index 45de151..d7296a5 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -68,6 +68,10 @@
};
};
+&mmc0 {
+ cd-gpios = <&gpio1 18 0>;
+};
+
&usb1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts
index 09792b4..f9345e02 100644
--- a/arch/arm/boot/dts/socfpga_vt.dts
+++ b/arch/arm/boot/dts/socfpga_vt.dts
@@ -43,13 +43,10 @@
dwmmc0@ff704000 {
num-slots = <1>;
- supports-highspeed;
broken-cd;
-
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- };
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
};
ethernet@ff700000 {
diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c
index 075ec05..70b2504c 100644
--- a/arch/arm/mach-at91/board-dt-sama5.c
+++ b/arch/arm/mach-at91/board-dt-sama5.c
@@ -46,30 +46,8 @@
of_irq_init(irq_of_match);
}
-static int ksz9021rn_phy_fixup(struct phy_device *phy)
-{
- int value;
-
- /* Set delay values */
- value = MICREL_KSZ9021_RGMII_CLK_CTRL_PAD_SCEW | 0x8000;
- phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value);
- value = 0xF2F4;
- phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value);
- value = MICREL_KSZ9021_RGMII_RX_DATA_PAD_SCEW | 0x8000;
- phy_write(phy, MICREL_KSZ9021_EXTREG_CTRL, value);
- value = 0x2222;
- phy_write(phy, MICREL_KSZ9021_EXTREG_DATA_WRITE, value);
-
- return 0;
-}
-
static void __init sama5_dt_device_init(void)
{
- if (of_machine_is_compatible("atmel,sama5d3xcm") &&
- IS_ENABLED(CONFIG_PHYLIB))
- phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
- ksz9021rn_phy_fixup);
-
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index ed19287..f703d82 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -46,6 +46,7 @@
OF_DEV_AUXDATA("ti,davinci_mdio", 0x01e24000, "davinci_mdio.0", NULL),
OF_DEV_AUXDATA("ti,davinci-dm6467-emac", 0x01e20000, "davinci_emac.1",
NULL),
+ OF_DEV_AUXDATA("ti,da830-mcasp-audio", 0x01d00000, "davinci-mcasp.0", NULL),
{}
};
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 9480997..bdb5194 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -241,6 +241,8 @@
#ifdef CONFIG_SOC_DRA7XX
static const char *dra74x_boards_compat[] __initconst = {
+ "ti,am5728",
+ "ti,am5726",
"ti,dra742",
"ti,dra7",
NULL,
@@ -260,6 +262,8 @@
MACHINE_END
static const char *dra72x_boards_compat[] __initconst = {
+ "ti,am5718",
+ "ti,am5716",
"ti,dra722",
NULL,
};
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 90c88d4..b9d091b 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -253,6 +253,11 @@
}
}
+
+static void __init omap3_tao3530_legacy_init(void)
+{
+ hsmmc2_internal_input_clk();
+}
#endif /* CONFIG_ARCH_OMAP3 */
#ifdef CONFIG_ARCH_OMAP4
@@ -377,6 +382,7 @@
{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
{ "ti,omap3-zoom3", omap3_zoom_legacy_init, },
{ "ti,am3517-evm", am3517_evm_legacy_init, },
+ { "technexion,omap3-tao3530", omap3_tao3530_legacy_init, },
#endif
#ifdef CONFIG_ARCH_OMAP4
{ "ti,omap4-sdp", omap4_sdp_legacy_init, },
diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c
index c437a99..6d8bbf7 100644
--- a/arch/arm/mach-qcom/board.c
+++ b/arch/arm/mach-qcom/board.c
@@ -18,6 +18,8 @@
"qcom,apq8064",
"qcom,apq8074-dragonboard",
"qcom,apq8084",
+ "qcom,ipq8062",
+ "qcom,ipq8064",
"qcom,msm8660-surf",
"qcom,msm8960-cdp",
NULL
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index d168669..ac5803c 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -4,6 +4,7 @@
select PINCTRL_ROCKCHIP
select ARCH_HAS_RESET_CONTROLLER
select ARCH_REQUIRE_GPIOLIB
+ select ARM_AMBA
select ARM_GIC
select CACHE_L2X0
select HAVE_ARM_ARCH_TIMER
diff --git a/include/dt-bindings/clock/r8a7740-clock.h b/include/dt-bindings/clock/r8a7740-clock.h
new file mode 100644
index 0000000..f6b4b0f
--- /dev/null
+++ b/include/dt-bindings/clock/r8a7740-clock.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright 2014 Ulrich Hecht
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7740_H__
+#define __DT_BINDINGS_CLOCK_R8A7740_H__
+
+/* CPG */
+#define R8A7740_CLK_SYSTEM 0
+#define R8A7740_CLK_PLLC0 1
+#define R8A7740_CLK_PLLC1 2
+#define R8A7740_CLK_PLLC2 3
+#define R8A7740_CLK_R 4
+#define R8A7740_CLK_USB24S 5
+#define R8A7740_CLK_I 6
+#define R8A7740_CLK_ZG 7
+#define R8A7740_CLK_B 8
+#define R8A7740_CLK_M1 9
+#define R8A7740_CLK_HP 10
+#define R8A7740_CLK_HPP 11
+#define R8A7740_CLK_USBP 12
+#define R8A7740_CLK_S 13
+#define R8A7740_CLK_ZB 14
+#define R8A7740_CLK_M3 15
+#define R8A7740_CLK_CP 16
+
+/* MSTP1 */
+#define R8A7740_CLK_CEU21 28
+#define R8A7740_CLK_CEU20 27
+#define R8A7740_CLK_TMU0 25
+#define R8A7740_CLK_LCDC1 17
+#define R8A7740_CLK_IIC0 16
+#define R8A7740_CLK_TMU1 11
+#define R8A7740_CLK_LCDC0 0
+
+/* MSTP2 */
+#define R8A7740_CLK_SCIFA6 30
+#define R8A7740_CLK_SCIFA7 22
+#define R8A7740_CLK_DMAC1 18
+#define R8A7740_CLK_DMAC2 17
+#define R8A7740_CLK_DMAC3 16
+#define R8A7740_CLK_USBDMAC 14
+#define R8A7740_CLK_SCIFA5 7
+#define R8A7740_CLK_SCIFB 6
+#define R8A7740_CLK_SCIFA0 4
+#define R8A7740_CLK_SCIFA1 3
+#define R8A7740_CLK_SCIFA2 2
+#define R8A7740_CLK_SCIFA3 1
+#define R8A7740_CLK_SCIFA4 0
+
+/* MSTP3 */
+#define R8A7740_CLK_CMT1 29
+#define R8A7740_CLK_FSI 28
+#define R8A7740_CLK_IIC1 23
+#define R8A7740_CLK_USBF 20
+#define R8A7740_CLK_SDHI0 14
+#define R8A7740_CLK_SDHI1 13
+#define R8A7740_CLK_MMC 12
+#define R8A7740_CLK_GETHER 9
+#define R8A7740_CLK_TPU0 4
+
+/* MSTP4 */
+#define R8A7740_CLK_USBH 16
+#define R8A7740_CLK_SDHI2 15
+#define R8A7740_CLK_USBFUNC 7
+#define R8A7740_CLK_USBPHY 6
+
+/* SUBCK* */
+#define R8A7740_CLK_SUBCK 9
+#define R8A7740_CLK_SUBCK2 10
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7740_H__ */
diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h
index f929a79e..8ea7ab0 100644
--- a/include/dt-bindings/clock/r8a7790-clock.h
+++ b/include/dt-bindings/clock/r8a7790-clock.h
@@ -26,6 +26,7 @@
#define R8A7790_CLK_MSIOF0 0
/* MSTP1 */
+#define R8A7790_CLK_JPU 6
#define R8A7790_CLK_TMU1 11
#define R8A7790_CLK_TMU3 21
#define R8A7790_CLK_TMU2 22
diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h
index f0d4d10..58c3f49 100644
--- a/include/dt-bindings/clock/r8a7791-clock.h
+++ b/include/dt-bindings/clock/r8a7791-clock.h
@@ -25,6 +25,7 @@
#define R8A7791_CLK_MSIOF0 0
/* MSTP1 */
+#define R8A7791_CLK_JPU 6
#define R8A7791_CLK_TMU1 11
#define R8A7791_CLK_TMU3 21
#define R8A7791_CLK_TMU2 22
diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h
new file mode 100644
index 0000000..9ac1043
--- /dev/null
+++ b/include/dt-bindings/clock/r8a7794-clock.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright 2013 Ideas On Board SPRL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7794_H__
+#define __DT_BINDINGS_CLOCK_R8A7794_H__
+
+/* CPG */
+#define R8A7794_CLK_MAIN 0
+#define R8A7794_CLK_PLL0 1
+#define R8A7794_CLK_PLL1 2
+#define R8A7794_CLK_PLL3 3
+#define R8A7794_CLK_LB 4
+#define R8A7794_CLK_QSPI 5
+#define R8A7794_CLK_SDH 6
+#define R8A7794_CLK_SD0 7
+#define R8A7794_CLK_Z 8
+
+/* MSTP0 */
+#define R8A7794_CLK_MSIOF0 0
+
+/* MSTP1 */
+#define R8A7794_CLK_TMU1 11
+#define R8A7794_CLK_TMU3 21
+#define R8A7794_CLK_TMU2 22
+#define R8A7794_CLK_CMT0 24
+#define R8A7794_CLK_TMU0 25
+
+/* MSTP2 */
+#define R8A7794_CLK_SCIFA2 2
+#define R8A7794_CLK_SCIFA1 3
+#define R8A7794_CLK_SCIFA0 4
+#define R8A7794_CLK_MSIOF2 5
+#define R8A7794_CLK_SCIFB0 6
+#define R8A7794_CLK_SCIFB1 7
+#define R8A7794_CLK_MSIOF1 8
+#define R8A7794_CLK_SCIFB2 16
+
+/* MSTP3 */
+#define R8A7794_CLK_CMT1 29
+
+/* MSTP5 */
+#define R8A7794_CLK_THERMAL 22
+#define R8A7794_CLK_PWM 23
+
+/* MSTP7 */
+#define R8A7794_CLK_HSCIF2 13
+#define R8A7794_CLK_SCIF5 14
+#define R8A7794_CLK_SCIF4 15
+#define R8A7794_CLK_HSCIF1 16
+#define R8A7794_CLK_HSCIF0 17
+#define R8A7794_CLK_SCIF3 18
+#define R8A7794_CLK_SCIF2 19
+#define R8A7794_CLK_SCIF1 20
+#define R8A7794_CLK_SCIF0 21
+
+/* MSTP8 */
+#define R8A7794_CLK_ETHER 13
+
+/* MSTP9 */
+#define R8A7794_CLK_GPIO6 5
+#define R8A7794_CLK_GPIO5 7
+#define R8A7794_CLK_GPIO4 8
+#define R8A7794_CLK_GPIO3 9
+#define R8A7794_CLK_GPIO2 10
+#define R8A7794_CLK_GPIO1 11
+#define R8A7794_CLK_GPIO0 12
+
+/* MSTP11 */
+#define R8A7794_CLK_SCIFA3 6
+#define R8A7794_CLK_SCIFA4 7
+#define R8A7794_CLK_SCIFA5 8
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7794_H__ */
