/* SPDX-License-Identifier: GPL-2.0 */
/* Copyright (c) 2017 The Linux Foundation. All rights reserved. */

#ifndef _A6XX_GMU_H_
#define _A6XX_GMU_H_

#include <linux/completion.h>
#include <linux/iopoll.h>
#include <linux/interrupt.h>
#include <linux/notifier.h>
#include <linux/soc/qcom/qcom_aoss.h>
#include "msm_drv.h"
#include "a6xx_hfi.h"

struct a6xx_gmu_bo {
	struct drm_gem_object *obj;
	void *virt;
	size_t size;
	u64 iova;
};

/*
 * These define the different GMU wake up options - these define how both the
 * CPU and the GMU bring up the hardware
 */

/* THe GMU has already been booted and the rentention registers are active */
#define GMU_WARM_BOOT 0

/* the GMU is coming up for the first time or back from a power collapse */
#define GMU_COLD_BOOT 1

/*
 * These define the level of control that the GMU has - the higher the number
 * the more things that the GMU hardware controls on its own.
 */

/* The GMU does not do any idle state management */
#define GMU_IDLE_STATE_ACTIVE 0

/* The GMU manages SPTP power collapse */
#define GMU_IDLE_STATE_SPTP 2

/* The GMU does automatic IFPC (intra-frame power collapse) */
#define GMU_IDLE_STATE_IFPC 3

struct a6xx_gmu {
	struct device *dev;

	/* For serializing communication with the GMU: */
	struct mutex lock;

	struct msm_gem_address_space *aspace;

	void __iomem *mmio;
	void __iomem *rscc;

	int hfi_irq;
	int gmu_irq;

	struct device *gxpd;
	struct device *cxpd;

	int idle_level;

	struct a6xx_gmu_bo hfi;
	struct a6xx_gmu_bo debug;
	struct a6xx_gmu_bo icache;
	struct a6xx_gmu_bo dcache;
	struct a6xx_gmu_bo dummy;
	struct a6xx_gmu_bo log;

	int nr_clocks;
	struct clk_bulk_data *clocks;
	struct clk *core_clk;
	struct clk *hub_clk;

	/* current performance index set externally */
	int current_perf_index;

	int nr_gpu_freqs;
	unsigned long gpu_freqs[16];
	u32 gx_arc_votes[16];

	int nr_gmu_freqs;
	unsigned long gmu_freqs[4];
	u32 cx_arc_votes[4];

	unsigned long freq;

	struct a6xx_hfi_queue queues[2];

	bool initialized;
	bool hung;
	bool legacy; /* a618 or a630 */

	/* For power domain callback */
	struct notifier_block pd_nb;
	struct completion pd_gate;

	struct qmp *qmp;
};

static inline u32 gmu_read(struct a6xx_gmu *gmu, u32 offset)
{
	return msm_readl(gmu->mmio + (offset << 2));
}

static inline void gmu_write(struct a6xx_gmu *gmu, u32 offset, u32 value)
{
	msm_writel(value, gmu->mmio + (offset << 2));
}

static inline void
gmu_write_bulk(struct a6xx_gmu *gmu, u32 offset, const u32 *data, u32 size)
{
	memcpy_toio(gmu->mmio + (offset << 2), data, size);
	wmb();
}

static inline void gmu_rmw(struct a6xx_gmu *gmu, u32 reg, u32 mask, u32 or)
{
	u32 val = gmu_read(gmu, reg);

	val &= ~mask;

	gmu_write(gmu, reg, val | or);
}

static inline u64 gmu_read64(struct a6xx_gmu *gmu, u32 lo, u32 hi)
{
	u64 val;

	val = (u64) msm_readl(gmu->mmio + (lo << 2));
	val |= ((u64) msm_readl(gmu->mmio + (hi << 2)) << 32);

	return val;
}

#define gmu_poll_timeout(gmu, addr, val, cond, interval, timeout) \
	readl_poll_timeout((gmu)->mmio + ((addr) << 2), val, cond, \
		interval, timeout)

static inline u32 gmu_read_rscc(struct a6xx_gmu *gmu, u32 offset)
{
	return msm_readl(gmu->rscc + (offset << 2));
}

static inline void gmu_write_rscc(struct a6xx_gmu *gmu, u32 offset, u32 value)
{
	msm_writel(value, gmu->rscc + (offset << 2));
}

#define gmu_poll_timeout_rscc(gmu, addr, val, cond, interval, timeout) \
	readl_poll_timeout((gmu)->rscc + ((addr) << 2), val, cond, \
		interval, timeout)

/*
 * These are the available OOB (out of band requests) to the GMU where "out of
 * band" means that the CPU talks to the GMU directly and not through HFI.
 * Normally this works by writing a ITCM/DTCM register and then triggering a
 * interrupt (the "request" bit) and waiting for an acknowledgment (the "ack"
 * bit). The state is cleared by writing the "clear' bit to the GMU interrupt.
 *
 * These are used to force the GMU/GPU to stay on during a critical sequence or
 * for hardware workarounds.
 */

enum a6xx_gmu_oob_state {
	/*
	 * Let the GMU know that a boot or slumber operation has started. The value in
	 * REG_A6XX_GMU_BOOT_SLUMBER_OPTION lets the GMU know which operation we are
	 * doing
	 */
	GMU_OOB_BOOT_SLUMBER = 0,
	/*
	 * Let the GMU know to not turn off any GPU registers while the CPU is in a
	 * critical section
	 */
	GMU_OOB_GPU_SET,
	/*
	 * Set a new power level for the GPU when the CPU is doing frequency scaling
	 */
	GMU_OOB_DCVS_SET,
	/*
	 * Used to keep the GPU on for CPU-side reads of performance counters.
	 */
	GMU_OOB_PERFCOUNTER_SET,
};

void a6xx_hfi_init(struct a6xx_gmu *gmu);
int a6xx_hfi_start(struct a6xx_gmu *gmu, int boot_state);
void a6xx_hfi_stop(struct a6xx_gmu *gmu);
int a6xx_hfi_send_prep_slumber(struct a6xx_gmu *gmu);
int a6xx_hfi_set_freq(struct a6xx_gmu *gmu, int index);

bool a6xx_gmu_gx_is_on(struct a6xx_gmu *gmu);
bool a6xx_gmu_sptprac_is_on(struct a6xx_gmu *gmu);
void a6xx_sptprac_disable(struct a6xx_gmu *gmu);
int a6xx_sptprac_enable(struct a6xx_gmu *gmu);

#endif