iio: make stm32 trigger driver use INDIO_HARDWARE_TRIGGERED mode
Add validate function to be use to use the correct trigger.
Add an attribute to configure device mode like for quadrature and
enable modes
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
diff --git a/drivers/iio/trigger/stm32-timer-trigger.c b/drivers/iio/trigger/stm32-timer-trigger.c
index 0797f2f..d22bc56 100644
--- a/drivers/iio/trigger/stm32-timer-trigger.c
+++ b/drivers/iio/trigger/stm32-timer-trigger.c
@@ -417,12 +417,70 @@ static int stm32_counter_write_raw(struct iio_dev *indio_dev,
return -EINVAL;
}
+static int stm32_counter_validate_trigger(struct iio_dev *indio_dev,
+ struct iio_trigger *trig)
+{
+ struct stm32_timer_trigger *priv = iio_priv(indio_dev);
+ const char * const *cur = priv->valids;
+ unsigned int i = 0;
+
+ if (!is_stm32_timer_trigger(trig))
+ return -EINVAL;
+
+ while (cur && *cur) {
+ if (!strncmp(trig->name, *cur, strlen(trig->name))) {
+ regmap_update_bits(priv->regmap,
+ TIM_SMCR, TIM_SMCR_TS,
+ i << TIM_SMCR_TS_SHIFT);
+ return 0;
+ }
+ cur++;
+ i++;
+ }
+
+ return -EINVAL;
+}
+
static const struct iio_info stm32_trigger_info = {
.driver_module = THIS_MODULE,
+ .validate_trigger = stm32_counter_validate_trigger,
.read_raw = stm32_counter_read_raw,
.write_raw = stm32_counter_write_raw
};
+static const char *const stm32_trigger_modes[] = {
+ "trigger",
+};
+
+static int stm32_set_trigger_mode(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ unsigned int mode)
+{
+ struct stm32_timer_trigger *priv = iio_priv(indio_dev);
+
+ regmap_update_bits(priv->regmap, TIM_SMCR, TIM_SMCR_SMS, TIM_SMCR_SMS);
+
+ return 0;
+}
+
+static int stm32_get_trigger_mode(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan)
+{
+ struct stm32_timer_trigger *priv = iio_priv(indio_dev);
+ u32 smcr;
+
+ regmap_read(priv->regmap, TIM_SMCR, &smcr);
+
+ return smcr == TIM_SMCR_SMS ? 0 : -EINVAL;
+}
+
+static const struct iio_enum stm32_trigger_mode_enum = {
+ .items = stm32_trigger_modes,
+ .num_items = ARRAY_SIZE(stm32_trigger_modes),
+ .set = stm32_set_trigger_mode,
+ .get = stm32_get_trigger_mode
+};
+
static const char *const stm32_enable_modes[] = {
"always",
"gated",
@@ -606,6 +664,8 @@ static const struct iio_chan_spec_ext_info stm32_trigger_count_info[] = {
IIO_ENUM_AVAILABLE("quadrature_mode", &stm32_quadrature_mode_enum),
IIO_ENUM("enable_mode", IIO_SEPARATE, &stm32_enable_mode_enum),
IIO_ENUM_AVAILABLE("enable_mode", &stm32_enable_mode_enum),
+ IIO_ENUM("trigger_mode", IIO_SEPARATE, &stm32_trigger_mode_enum),
+ IIO_ENUM_AVAILABLE("trigger_mode", &stm32_trigger_mode_enum),
{}
};
@@ -630,6 +690,7 @@ static struct stm32_timer_trigger *stm32_setup_counter_device(struct device *dev
indio_dev->name = dev_name(dev);
indio_dev->dev.parent = dev;
indio_dev->info = &stm32_trigger_info;
+ indio_dev->modes = INDIO_HARDWARE_TRIGGERED;
indio_dev->num_channels = 1;
indio_dev->channels = &stm32_trigger_channel;
indio_dev->dev.of_node = dev->of_node;
