blob: 8c47a9b0b5079aabb46a434fc9df5d94c5365d1a [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/panel/sharp,ls037v7dw01.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: SHARP LS037V7DW01 TFT-LCD panel
description: |
This panel can have zero to five GPIOs to configure to change configuration
between QVGA and VGA mode and the scan direction. As these pins can be also
configured with external pulls, all the GPIOs are considered optional with holes
in the array.
maintainers:
- Tony Lindgren <tony@atomide.com>
allOf:
- $ref: panel-common.yaml#
properties:
compatible:
const: sharp,ls037v7dw01
label: true
enable-gpios: true
reset-gpios: true
port: true
power-supply: true
mode-gpios:
minItems: 1
maxItems: 3
description: |
GPIO ordered MO, LR, and UD as specified in LS037V7DW01.pdf
This panel can have zero to three GPIOs to configure to
change configuration between QVGA and VGA mode and the
scan direction. As these pins can be also configured
with external pulls, all the GPIOs are considered
optional with holes in the array.
required:
- compatible
- port
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
lcd0: display {
compatible = "sharp,ls037v7dw01";
power-supply = <&lcd_3v3>;
enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; /* gpio152, lcd INI */
reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd RESB */
mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH /* gpio154, lcd MO */
&gpio1 2 GPIO_ACTIVE_HIGH /* gpio2, lcd LR */
&gpio1 3 GPIO_ACTIVE_HIGH>; /* gpio3, lcd UD */
port {
lcd_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
};
...