// SPDX-License-Identifier: GPL-2.0
#include "qcom-msm8974pro.dtsi"
#include "qcom-pma8084.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/leds/common.h>

/ {
	model = "Samsung Galaxy S5";
	compatible = "samsung,klte", "qcom,msm8974";

	aliases {
		serial0 = &blsp1_uart1;
		mmc0 = &sdhc_1; /* SDC1 eMMC slot */
		mmc1 = &sdhc_2; /* SDC2 SD card slot */
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	smd {
		rpm {
			rpm_requests {
				pma8084-regulators {
					compatible = "qcom,rpm-pma8084-regulators";
					status = "okay";

					pma8084_s1: s1 {
						regulator-min-microvolt = <675000>;
						regulator-max-microvolt = <1050000>;
						regulator-always-on;
					};

					pma8084_s2: s2 {
						regulator-min-microvolt = <500000>;
						regulator-max-microvolt = <1050000>;
					};

					pma8084_s3: s3 {
						regulator-min-microvolt = <1300000>;
						regulator-max-microvolt = <1300000>;
					};

					pma8084_s4: s4 {
						regulator-min-microvolt = <1800000>;
						regulator-max-microvolt = <1800000>;
					};

					pma8084_s5: s5 {
						regulator-min-microvolt = <2150000>;
						regulator-max-microvolt = <2150000>;
					};

					pma8084_s6: s6 {
						regulator-min-microvolt = <1050000>;
						regulator-max-microvolt = <1050000>;
					};

					pma8084_l1: l1 {
						regulator-min-microvolt = <1225000>;
						regulator-max-microvolt = <1225000>;
					};

					pma8084_l2: l2 {
						regulator-min-microvolt = <1200000>;
						regulator-max-microvolt = <1200000>;
					};

					pma8084_l3: l3 {
						regulator-min-microvolt = <1050000>;
						regulator-max-microvolt = <1200000>;
					};

					pma8084_l4: l4 {
						regulator-min-microvolt = <1200000>;
						regulator-max-microvolt = <1225000>;
					};

					pma8084_l5: l5 {
						regulator-min-microvolt = <1800000>;
						regulator-max-microvolt = <1800000>;
					};

					pma8084_l6: l6 {
						regulator-min-microvolt = <1800000>;
						regulator-max-microvolt = <1800000>;
					};

					pma8084_l7: l7 {
						regulator-min-microvolt = <1800000>;
						regulator-max-microvolt = <1800000>;
					};

					pma8084_l8: l8 {
						regulator-min-microvolt = <1800000>;
						regulator-max-microvolt = <1800000>;
					};

					pma8084_l9: l9 {
						regulator-min-microvolt = <1800000>;
						regulator-max-microvolt = <2950000>;
					};

					pma8084_l10: l10 {
						regulator-min-microvolt = <1800000>;
						regulator-max-microvolt = <2950000>;
					};

					pma8084_l11: l11 {
						regulator-min-microvolt = <1300000>;
						regulator-max-microvolt = <1300000>;
					};

					pma8084_l12: l12 {
						regulator-min-microvolt = <1800000>;
						regulator-max-microvolt = <1800000>;
						regulator-always-on;
					};

					pma8084_l13: l13 {
						regulator-min-microvolt = <1800000>;
						regulator-max-microvolt = <2950000>;
					};

					pma8084_l14: l14 {
						regulator-min-microvolt = <1800000>;
						regulator-max-microvolt = <1800000>;
					};

					pma8084_l15: l15 {
						regulator-min-microvolt = <2050000>;
						regulator-max-microvolt = <2050000>;
					};

					pma8084_l16: l16 {
						regulator-min-microvolt = <2700000>;
						regulator-max-microvolt = <2700000>;
					};

					pma8084_l17: l17 {
						regulator-min-microvolt = <2850000>;
						regulator-max-microvolt = <2850000>;
					};

					pma8084_l18: l18 {
						regulator-min-microvolt = <2850000>;
						regulator-max-microvolt = <2850000>;
					};

					pma8084_l19: l19 {
						regulator-min-microvolt = <3300000>;
						regulator-max-microvolt = <3300000>;
					};

					pma8084_l20: l20 {
						regulator-min-microvolt = <2950000>;
						regulator-max-microvolt = <2950000>;

						regulator-allow-set-load;
						regulator-system-load = <200000>;
					};

					pma8084_l21: l21 {
						regulator-min-microvolt = <2950000>;
						regulator-max-microvolt = <2950000>;

						regulator-allow-set-load;
						regulator-system-load = <200000>;
					};

					pma8084_l22: l22 {
						regulator-min-microvolt = <3000000>;
						regulator-max-microvolt = <3300000>;
					};

					pma8084_l23: l23 {
						regulator-min-microvolt = <3000000>;
						regulator-max-microvolt = <3000000>;
					};

					pma8084_l24: l24 {
						regulator-min-microvolt = <3075000>;
						regulator-max-microvolt = <3075000>;
					};

					pma8084_l25: l25 {
						regulator-min-microvolt = <2100000>;
						regulator-max-microvolt = <2100000>;
					};

					pma8084_l26: l26 {
						regulator-min-microvolt = <1800000>;
						regulator-max-microvolt = <2050000>;
					};

					pma8084_l27: l27 {
						regulator-min-microvolt = <1000000>;
						regulator-max-microvolt = <1225000>;
					};

					pma8084_lvs1: lvs1 {};
					pma8084_lvs2: lvs2 {};
					pma8084_lvs3: lvs3 {};
					pma8084_lvs4: lvs4 {};

					pma8084_5vs1: 5vs1 {};
				};
			};
		};
	};

	i2c-gpio-touchkey {
		compatible = "i2c-gpio";
		#address-cells = <1>;
		#size-cells = <0>;
		sda-gpios = <&msmgpio 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		scl-gpios = <&msmgpio 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2c_touchkey_pins>;

		touchkey@20 {
			compatible = "cypress,tm2-touchkey";
			reg = <0x20>;

			interrupt-parent = <&pma8084_gpios>;
			interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
			pinctrl-names = "default";
			pinctrl-0 = <&touchkey_pin>;

			vcc-supply = <&max77826_ldo15>;
			vdd-supply = <&pma8084_l19>;

			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
		};
	};

	i2c-gpio-led {
		compatible = "i2c-gpio";
		#address-cells = <1>;
		#size-cells = <0>;
		scl-gpios = <&msmgpio 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		sda-gpios = <&msmgpio 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		pinctrl-names = "default";
		pinctrl-0 = <&i2c_led_gpioex_pins>;

		i2c-gpio,delay-us = <2>;

		gpio_expander: gpio@20 {
			compatible = "nxp,pcal6416";
			reg = <0x20>;

			gpio-controller;
			#gpio-cells = <2>;

			vcc-supply = <&pma8084_s4>;

			pinctrl-names = "default";
			pinctrl-0 = <&gpioex_pin>;

			reset-gpios = <&msmgpio 145 GPIO_ACTIVE_LOW>;
		};

		led-controller@30 {
			compatible = "panasonic,an30259a";
			reg = <0x30>;

			#address-cells = <1>;
			#size-cells = <0>;

			led@1 {
				reg = <1>;
				function = LED_FUNCTION_STATUS;
				color = <LED_COLOR_ID_RED>;
			};

			led@2 {
				reg = <2>;
				function = LED_FUNCTION_STATUS;
				color = <LED_COLOR_ID_GREEN>;
			};

			led@3 {
				reg = <3>;
				function = LED_FUNCTION_STATUS;
				color = <LED_COLOR_ID_BLUE>;
			};
		};
	};

	vreg_wlan: wlan-regulator {
		compatible = "regulator-fixed";

		regulator-name = "wl-reg";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	vreg_panel: panel-regulator {
		compatible = "regulator-fixed";

		pinctrl-names = "default";
		pinctrl-0 = <&panel_en_pin>;

		regulator-name = "panel-vddr-reg";
		regulator-min-microvolt = <1500000>;
		regulator-max-microvolt = <1500000>;

		gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	/delete-node/ vreg-boost;

	adsp-pil {
		cx-supply = <&pma8084_s2>;
	};
};

&soc {
	serial@f991e000 {
		status = "okay";
	};

	/* blsp2_uart8 */
	serial@f995e000 {
		status = "okay";

		pinctrl-names = "default", "sleep";
		pinctrl-0 = <&blsp2_uart8_pins_active>;
		pinctrl-1 = <&blsp2_uart8_pins_sleep>;

		bluetooth {
			compatible = "brcm,bcm43540-bt";
			max-speed = <3000000>;
			pinctrl-names = "default";
			pinctrl-0 = <&bt_pins>;
			device-wakeup-gpios = <&msmgpio 91 GPIO_ACTIVE_HIGH>;
			shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
			interrupt-parent = <&msmgpio>;
			interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "host-wakeup";
		};
	};

	gpio-keys {
		compatible = "gpio-keys";
		input-name = "gpio-keys";

		pinctrl-names = "default";
		pinctrl-0 = <&gpio_keys_pin_a>;

		volume-down {
			label = "volume_down";
			gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
			linux,input-type = <1>;
			linux,code = <KEY_VOLUMEDOWN>;
			debounce-interval = <15>;
		};

		home-key {
			label = "home_key";
			gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
			linux,input-type = <1>;
			linux,code = <KEY_HOMEPAGE>;
			wakeup-source;
			debounce-interval = <15>;
		};

		volume-up {
			label = "volume_up";
			gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
			linux,input-type = <1>;
			linux,code = <KEY_VOLUMEUP>;
			debounce-interval = <15>;
		};
	};

	pinctrl@fd510000 {
		blsp2_uart8_pins_active: blsp2-uart8-pins-active {
			pins = "gpio45", "gpio46", "gpio47", "gpio48";
			function = "blsp_uart8";
			drive-strength = <8>;
			bias-disable;
		};

		blsp2_uart8_pins_sleep: blsp2-uart8-pins-sleep {
			pins = "gpio45", "gpio46", "gpio47", "gpio48";
			function = "gpio";
			drive-strength = <2>;
			bias-pull-down;
		};

		bt_pins: bt-pins {
			hostwake {
				pins = "gpio75";
				function = "gpio";
				drive-strength = <16>;
				input-enable;
			};

			devwake {
				pins = "gpio91";
				function = "gpio";
				drive-strength = <2>;
			};
		};

		sdhc1_pin_a: sdhc1-pin-active {
			clk {
				pins = "sdc1_clk";
				drive-strength = <4>;
				bias-disable;
			};

			cmd-data {
				pins = "sdc1_cmd", "sdc1_data";
				drive-strength = <4>;
				bias-pull-up;
			};
		};

		sdhc2_pin_a: sdhc2-pin-active {
			clk-cmd-data {
				pins = "gpio35", "gpio36", "gpio37", "gpio38",
					"gpio39", "gpio40";
				function = "sdc3";
				drive-strength = <8>;
				bias-disable;
			};
		};

		sdhc2_cd_pin: sdhc2-cd {
			pins = "gpio62";
			function = "gpio";

			drive-strength = <2>;
			bias-disable;
		};

		sdhc3_pin_a: sdhc3-pin-active {
			clk {
				pins = "sdc2_clk";
				drive-strength = <6>;
				bias-disable;
			};

			cmd-data {
				pins = "sdc2_cmd", "sdc2_data";
				drive-strength = <6>;
				bias-pull-up;
			};
		};

		i2c2_pins: i2c2 {
			mux {
				pins = "gpio6", "gpio7";
				function = "blsp_i2c2";

				drive-strength = <2>;
				bias-disable;
			};
		};

		i2c6_pins: i2c6 {
			mux {
				pins = "gpio29", "gpio30";
				function = "blsp_i2c6";

				drive-strength = <2>;
				bias-disable;
			};
		};

		i2c12_pins: i2c12 {
			mux {
				pins = "gpio87", "gpio88";
				function = "blsp_i2c12";

				drive-strength = <2>;
				bias-disable;
			};
		};

		i2c_touchkey_pins: i2c-touchkey {
			mux {
				pins = "gpio95", "gpio96";
				function = "gpio";
				input-enable;
				bias-pull-up;
			};
		};

		i2c_led_gpioex_pins: i2c-led-gpioex {
			mux {
				pins = "gpio120", "gpio121";
				function = "gpio";
				input-enable;
				bias-pull-down;
			};
		};

		gpioex_pin: gpioex {
			res {
				pins = "gpio145";
				function = "gpio";

				bias-pull-up;
				drive-strength = <2>;
			};
		};

		wifi_pin: wifi {
			int {
				pins = "gpio92";
				function = "gpio";

				input-enable;
				bias-pull-down;
			};
		};

		panel_te_pin: panel {
			te {
				pins = "gpio12";
				function = "mdp_vsync";

				drive-strength = <2>;
				bias-disable;
			};
		};
	};

	sdhc_1: sdhci@f9824900 {
		status = "okay";

		vmmc-supply = <&pma8084_l20>;
		vqmmc-supply = <&pma8084_s4>;

		bus-width = <8>;
		non-removable;

		pinctrl-names = "default";
		pinctrl-0 = <&sdhc1_pin_a>;
	};

	sdhc_2: sdhci@f9864900 {
		status = "okay";

		max-frequency = <100000000>;

		vmmc-supply = <&pma8084_l21>;
		vqmmc-supply = <&pma8084_l13>;

		bus-width = <4>;

		/* cd-gpio is intentionally disabled. If enabled, an SD card
		 * present during boot is not initialized correctly. Without
		 * cd-gpios the driver resorts to polling, so hotplug works.
		 */
		pinctrl-names = "default";
		pinctrl-0 = <&sdhc2_pin_a /* &sdhc2_cd_pin */>;
		// cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
	};

	sdhci@f98a4900 {
		status = "okay";

		#address-cells = <1>;
		#size-cells = <0>;

		max-frequency = <100000000>;

		pinctrl-names = "default";
		pinctrl-0 = <&sdhc3_pin_a>;

		vmmc-supply = <&vreg_wlan>;
		vqmmc-supply = <&pma8084_s4>;

		bus-width = <4>;
		non-removable;

		wifi@1 {
			reg = <1>;
			compatible = "brcm,bcm4329-fmac";

			interrupt-parent = <&msmgpio>;
			interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "host-wake";

			pinctrl-names = "default";
			pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
		};
	};

	usb@f9a55000 {
		status = "okay";

		phys = <&usb_hs1_phy>;
		phy-select = <&tcsr 0xb000 0>;
		/*extcon = <&smbb>, <&usb_id>;*/
		/*vbus-supply = <&chg_otg>;*/

		hnp-disable;
		srp-disable;
		adp-disable;

		ulpi {
			phy@a {
				status = "okay";

				v1p8-supply = <&pma8084_l6>;
				v3p3-supply = <&pma8084_l24>;

				/*extcon = <&smbb>;*/
				qcom,init-seq = /bits/ 8 <0x1 0x64>;
			};
		};
	};

	i2c@f9924000 {
		status = "okay";

		pinctrl-names = "default";
		pinctrl-0 = <&i2c2_pins>;

		touchscreen@20 {
			compatible = "syna,rmi4-i2c";
			reg = <0x20>;

			interrupt-parent = <&pma8084_gpios>;
			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;

			vdd-supply = <&max77826_ldo13>;
			vio-supply = <&pma8084_lvs2>;

			pinctrl-names = "default";
			pinctrl-0 = <&touch_pin>;

			syna,startup-delay-ms = <100>;

			#address-cells = <1>;
			#size-cells = <0>;

			rmi4-f01@1 {
				reg = <0x1>;
				syna,nosleep-mode = <1>;
			};

			rmi4-f12@12 {
				reg = <0x12>;
				syna,sensor-type = <1>;
			};
		};
	};

	i2c@f9928000 {
		status = "okay";

		pinctrl-names = "default";
		pinctrl-0 = <&i2c6_pins>;

		pmic@60 {
			reg = <0x60>;
			compatible = "maxim,max77826";

			regulators {
				max77826_ldo1: LDO1 {
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
				};

				max77826_ldo2: LDO2 {
					regulator-min-microvolt = <1000000>;
					regulator-max-microvolt = <1000000>;
				};

				max77826_ldo3: LDO3 {
					regulator-min-microvolt = <1200000>;
					regulator-max-microvolt = <1200000>;
				};

				max77826_ldo4: LDO4 {
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
				};

				max77826_ldo5: LDO5 {
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
				};

				max77826_ldo6: LDO6 {
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <3300000>;
				};

				max77826_ldo7: LDO7 {
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
				};

				max77826_ldo8: LDO8 {
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <3300000>;
				};

				max77826_ldo9: LDO9 {
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
				};

				max77826_ldo10: LDO10 {
					regulator-min-microvolt = <2800000>;
					regulator-max-microvolt = <2950000>;
				};

				max77826_ldo11: LDO11 {
					regulator-min-microvolt = <2700000>;
					regulator-max-microvolt = <2950000>;
				};

				max77826_ldo12: LDO12 {
					regulator-min-microvolt = <2500000>;
					regulator-max-microvolt = <3300000>;
				};

				max77826_ldo13: LDO13 {
					regulator-min-microvolt = <3300000>;
					regulator-max-microvolt = <3300000>;
				};

				max77826_ldo14: LDO14 {
					regulator-min-microvolt = <3300000>;
					regulator-max-microvolt = <3300000>;
				};

				max77826_ldo15: LDO15 {
					regulator-min-microvolt = <1800000>;
					regulator-max-microvolt = <1800000>;
				};

				max77826_buck: BUCK {
					regulator-min-microvolt = <1225000>;
					regulator-max-microvolt = <1225000>;
				};

				max77826_buckboost: BUCKBOOST {
					regulator-min-microvolt = <3400000>;
					regulator-max-microvolt = <3400000>;
				};
			};
		};
	};

	i2c@f9968000 {
		status = "okay";

		pinctrl-names = "default";
		pinctrl-0 = <&i2c12_pins>;

		fuelgauge@36 {
			compatible = "maxim,max17048";
			reg = <0x36>;

			maxim,double-soc;
			maxim,rcomp = /bits/ 8 <0x56>;

			interrupt-parent = <&pma8084_gpios>;
			interrupts = <21 IRQ_TYPE_LEVEL_LOW>;

			pinctrl-names = "default";
			pinctrl-0 = <&fuelgauge_pin>;
		};
	};

	adreno@fdb00000 {
		status = "ok";
	};

	mdss@fd900000 {
		status = "ok";

		mdp@fd900000 {
			status = "ok";
		};

		dsi@fd922800 {
			status = "ok";

			vdda-supply = <&pma8084_l2>;
			vdd-supply = <&pma8084_l22>;
			vddio-supply = <&pma8084_l12>;

			#address-cells = <1>;
			#size-cells = <0>;

			ports {
				port@1 {
					endpoint {
						remote-endpoint = <&panel_in>;
						data-lanes = <0 1 2 3>;
					};
				};
			};

			panel: panel@0 {
				reg = <0>;
				compatible = "samsung,s6e3fa2";

				pinctrl-names = "default";
				pinctrl-0 = <&panel_te_pin &panel_rst_pin>;

				iovdd-supply = <&pma8084_lvs4>;
				vddr-supply = <&vreg_panel>;

				reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
				te-gpios = <&msmgpio 12 GPIO_ACTIVE_HIGH>;

				port {
					panel_in: endpoint {
						remote-endpoint = <&dsi0_out>;
					};
				};
			};
		};

		dsi-phy@fd922a00 {
			status = "ok";

			vddio-supply = <&pma8084_l12>;
		};
	};

	remoteproc@fc880000 {
		cx-supply = <&pma8084_s2>;
		mss-supply = <&pma8084_s6>;
		mx-supply = <&pma8084_s1>;
		pll-supply = <&pma8084_l12>;
	};
};

&spmi_bus {
	pma8084@0 {
		gpios@c000 {
			gpio_keys_pin_a: gpio-keys-active {
				pins = "gpio2", "gpio3", "gpio5";
				function = "normal";

				bias-pull-up;
				power-source = <PMA8084_GPIO_S4>;
			};

			touchkey_pin: touchkey-int-pin {
				pins = "gpio6";
				function = "normal";
				bias-disable;
				input-enable;
				power-source = <PMA8084_GPIO_S4>;
			};

			touch_pin: touchscreen-int-pin {
				pins = "gpio8";
				function = "normal";
				bias-disable;
				input-enable;
				power-source = <PMA8084_GPIO_S4>;
			};

			panel_en_pin: panel-en-pin {
				pins = "gpio14";
				function = "normal";
				bias-pull-up;
				power-source = <PMA8084_GPIO_S4>;
				qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
			};

			wlan_sleep_clk_pin: wlan-sleep-clk-pin {
				pins = "gpio16";
				function = "func2";

				output-high;
				power-source = <PMA8084_GPIO_S4>;
				qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
			};

			panel_rst_pin: panel-rst-pin {
				pins = "gpio17";
				function = "normal";
				bias-disable;
				power-source = <PMA8084_GPIO_S4>;
				qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
			};


			fuelgauge_pin: fuelgauge-int-pin {
				pins = "gpio21";
				function = "normal";
				bias-disable;
				input-enable;
				power-source = <PMA8084_GPIO_S4>;
			};
		};
	};
};