blob: afb455210bd07ed68319890c6fed3549d63f38e7 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
//
// Device Tree file for LX2160A-CEx7
//
// Copyright 2019 SolidRun Ltd.
/dts-v1/;
#include "fsl-lx2160a.dtsi"
/ {
model = "SolidRun LX2160A COM Express Type 7 module";
compatible = "solidrun,lx2160a-cex7", "fsl,lx2160a";
aliases {
crypto = &crypto;
};
sb_3v3: regulator-sb3v3 {
compatible = "regulator-fixed";
regulator-name = "RT7290";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
&crypto {
status = "okay";
};
&dpmac17 {
phy-handle = <&rgmii_phy1>;
phy-connection-type = "rgmii-id";
};
&emdio1 {
status = "okay";
rgmii_phy1: ethernet-phy@1 {
reg = <1>;
qca,smarteee-tw-us-1g = <24>;
};
};
&esdhc1 {
mmc-hs200-1_8v;
mmc-hs400-1_8v;
bus-width = <8>;
status = "okay";
};
&i2c0 {
status = "okay";
i2c-switch@77 {
compatible = "nxp,pca9547";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x77>;
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
eeprom@50 {
compatible = "atmel,24c512";
reg = <0x50>;
};
eeprom@51 {
compatible = "atmel,spd";
reg = <0x51>;
};
eeprom@53 {
compatible = "atmel,spd";
reg = <0x53>;
};
eeprom@57 {
compatible = "atmel,24c02";
reg = <0x57>;
};
};
i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
fan-temperature-ctrlr@18 {
compatible = "ti,amc6821";
reg = <0x18>;
cooling-min-state = <0>;
cooling-max-state = <9>;
#cooling-cells = <2>;
};
};
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
regulator@5c {
compatible = "lltc,ltc3882";
reg = <0x5c>;
};
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
temperature-sensor@48 {
compatible = "nxp,sa56004";
reg = <0x48>;
vcc-supply = <&sb_3v3>;
};
};
sfp0_i2c: i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <4>;
};
sfp1_i2c: i2c@5 {
#address-cells = <1>;
#size-cells = <0>;
reg = <5>;
};
sfp2_i2c: i2c@6 {
#address-cells = <1>;
#size-cells = <0>;
reg = <6>;
};
sfp3_i2c: i2c@7 {
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
};
};
};
&i2c2 {
status = "okay";
};
&i2c4 {
status = "okay";
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
};
};
&fspi {
status = "okay";
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,m25p80";
m25p,fast-read;
spi-max-frequency = <50000000>;
reg = <0>;
/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
spi-rx-bus-width = <8>;
spi-tx-bus-width = <1>;
};
};
&usb0 {
status = "okay";
};
&usb1 {
status = "okay";
};