aoe: revert printk macros
This patch addresses the concern that the aoe driver should
not introduce unecessary conventions that must be learned by
the reader. It reverts patch 6.
Signed-off-by: "Ed L. Cashin" <ecashin@coraid.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c
index 2d0bcdd..8a13b1af 100644
--- a/drivers/block/aoe/aoecmd.c
+++ b/drivers/block/aoe/aoecmd.c
@@ -159,7 +159,7 @@
buf->nframesout += 1;
buf->bufaddr += bcnt;
buf->bv_resid -= bcnt;
-/* dprintk("bv_resid=%ld\n", buf->bv_resid); */
+/* printk(KERN_DEBUG "aoe: bv_resid=%ld\n", buf->bv_resid); */
buf->resid -= bcnt;
buf->sector += bcnt >> 9;
if (buf->resid == 0) {
@@ -203,7 +203,7 @@
skb = new_skb(sizeof *h + sizeof *ch);
if (skb == NULL) {
- iprintk("skb alloc failure\n");
+ printk(KERN_INFO "aoe: skb alloc failure\n");
continue;
}
skb->dev = ifp;
@@ -276,7 +276,7 @@
return;
buf = container_of(d->bufq.next, struct buf, bufs);
list_del(d->bufq.next);
-/*dprintk("bi_size=%ld\n", buf->bio->bi_size); */
+/*printk(KERN_DEBUG "aoe: bi_size=%ld\n", buf->bio->bi_size); */
d->inprocess = buf;
}
aoecmd_ata_rw(d, f);
@@ -319,7 +319,7 @@
}
if (++d->lostjumbo > (d->nframes << 1))
if (d->maxbcnt != DEFAULTBCNT) {
- iprintk("e%ld.%ld: too many lost jumbo on %s - using 1KB frames.\n",
+ printk(KERN_INFO "aoe: e%ld.%ld: too many lost jumbo on %s - using 1KB frames.\n",
d->aoemajor, d->aoeminor, d->ifp->name);
d->maxbcnt = DEFAULTBCNT;
d->flags |= DEVFL_MAXBCNT;
@@ -472,7 +472,7 @@
}
if (d->ssize != ssize)
- iprintk("%012llx e%lu.%lu v%04x has %llu sectors\n",
+ printk(KERN_INFO "aoe: %012llx e%lu.%lu v%04x has %llu sectors\n",
(unsigned long long)mac_addr(d->addr),
d->aoemajor, d->aoeminor,
d->fw_ver, (long long)ssize);
@@ -483,7 +483,7 @@
d->flags |= DEVFL_NEWSIZE;
} else {
if (d->flags & DEVFL_GDALLOC) {
- eprintk("can't schedule work for e%lu.%lu, %s\n",
+ printk(KERN_ERR "aoe: can't schedule work for e%lu.%lu, %s\n",
d->aoemajor, d->aoeminor,
"it's already on! This shouldn't happen.\n");
return;
@@ -569,7 +569,8 @@
if (ahout->cmdstat == WIN_IDENTIFY)
d->flags &= ~DEVFL_PAUSE;
if (ahin->cmdstat & 0xa9) { /* these bits cleared on success */
- eprintk("ata error cmd=%2.2Xh stat=%2.2Xh from e%ld.%ld\n",
+ printk(KERN_ERR
+ "aoe: ata error cmd=%2.2Xh stat=%2.2Xh from e%ld.%ld\n",
ahout->cmdstat, ahin->cmdstat,
d->aoemajor, d->aoeminor);
if (buf)
@@ -580,7 +581,8 @@
case WIN_READ:
case WIN_READ_EXT:
if (skb->len - sizeof *hin - sizeof *ahin < n) {
- eprintk("runt data size in read. skb->len=%d\n",
+ printk(KERN_ERR
+ "aoe: runt data size in read. skb->len=%d\n",
skb->len);
/* fail frame f? just returning will rexmit. */
spin_unlock_irqrestore(&d->lock, flags);
@@ -618,7 +620,8 @@
break;
case WIN_IDENTIFY:
if (skb->len - sizeof *hin - sizeof *ahin < 512) {
- iprintk("runt data size in ataid. skb->len=%d\n",
+ printk(KERN_INFO
+ "aoe: runt data size in ataid. skb->len=%d\n",
skb->len);
spin_unlock_irqrestore(&d->lock, flags);
return;
@@ -626,7 +629,8 @@
ataid_complete(d, (char *) (ahin+1));
break;
default:
- iprintk("unrecognized ata command %2.2Xh for %d.%d\n",
+ printk(KERN_INFO
+ "aoe: unrecognized ata command %2.2Xh for %d.%d\n",
ahout->cmdstat,
be16_to_cpu(hin->major),
hin->minor);
@@ -686,7 +690,7 @@
f = freeframe(d);
if (f == NULL) {
- eprintk("can't get a frame. This shouldn't happen.\n");
+ printk(KERN_ERR "aoe: can't get a frame. This shouldn't happen.\n");
return NULL;
}
@@ -732,14 +736,14 @@
*/
aoemajor = be16_to_cpu(h->major);
if (aoemajor == 0xfff) {
- eprintk("Warning: shelf address is all ones. "
+ printk(KERN_ERR "aoe: Warning: shelf address is all ones. "
"Check shelf dip switches.\n");
return;
}
sysminor = SYSMINOR(aoemajor, h->minor);
if (sysminor * AOE_PARTITIONS + AOE_PARTITIONS > MINORMASK) {
- iprintk("e%ld.%d: minor number too large\n",
+ printk(KERN_INFO "aoe: e%ld.%d: minor number too large\n",
aoemajor, (int) h->minor);
return;
}
@@ -750,7 +754,7 @@
d = aoedev_by_sysminor_m(sysminor, n);
if (d == NULL) {
- iprintk("device sysminor_m failure\n");
+ printk(KERN_INFO "aoe: device sysminor_m failure\n");
return;
}
@@ -767,7 +771,8 @@
n = ch->scnt;
n = n ? n * 512 : DEFAULTBCNT;
if (n != d->maxbcnt) {
- iprintk("e%ld.%ld: setting %d byte data frames on %s\n",
+ printk(KERN_INFO
+ "aoe: e%ld.%ld: setting %d byte data frames on %s\n",
d->aoemajor, d->aoeminor, n, d->ifp->name);
d->maxbcnt = n;
}
