| ltc2978 |
| |
| Required properties: |
| - compatible: should contain one of: |
| * "lltc,ltc2972" |
| * "lltc,ltc2974" |
| * "lltc,ltc2975" |
| * "lltc,ltc2977" |
| * "lltc,ltc2978" |
| * "lltc,ltc2979" |
| * "lltc,ltc2980" |
| * "lltc,ltc3880" |
| * "lltc,ltc3882" |
| * "lltc,ltc3883" |
| * "lltc,ltc3884" |
| * "lltc,ltc3886" |
| * "lltc,ltc3887" |
| * "lltc,ltc3889" |
| * "lltc,ltc7880" |
| * "lltc,ltm2987" |
| * "lltc,ltm4664" |
| * "lltc,ltm4675" |
| * "lltc,ltm4676" |
| * "lltc,ltm4677" |
| * "lltc,ltm4678" |
| * "lltc,ltm4680" |
| * "lltc,ltm4686" |
| * "lltc,ltm4700" |
| - reg: I2C slave address |
| |
| Optional properties: |
| - regulators: A node that houses a sub-node for each regulator controlled by |
| the device. Each sub-node is identified using the node's name, with valid |
| values listed below. The content of each sub-node is defined by the |
| standard binding for regulators; see regulator.txt. |
| |
| Valid names of regulators depend on number of supplies supported per device: |
| * ltc2972 vout0 - vout1 |
| * ltc2974, ltc2975 : vout0 - vout3 |
| * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7 |
| * ltc2978 : vout0 - vout7 |
| * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1 |
| * ltc7880 : vout0 - vout1 |
| * ltc3883 : vout0 |
| * ltm4664 : vout0 - vout1 |
| * ltm4675, ltm4676, ltm4677, ltm4678 : vout0 - vout1 |
| * ltm4680, ltm4686 : vout0 - vout1 |
| * ltm4700 : vout0 - vout1 |
| |
| Example: |
| ltc2978@5e { |
| compatible = "lltc,ltc2978"; |
| reg = <0x5e>; |
| regulators { |
| vout0 { |
| regulator-name = "FPGA-2.5V"; |
| }; |
| vout2 { |
| regulator-name = "FPGA-1.5V"; |
| }; |
| }; |
| }; |
