blob: 451cc4e86b01898f85e4d218d6aa8b0bb4be9d96 [file] [log] [blame]
MCP16502 PMIC
Required properties:
- compatible: "microchip,mcp16502"
- reg: I2C slave address
- lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during
suspend-to-ram, keeping the PMIC into HIBERNATE mode; this
property is optional;
- regulators: A node that houses a sub-node for each regulator within
the device. Each sub-node is identified using the node's
name. The content of each sub-node is defined by the
standard binding for regulators; see regulator.txt.
Regulators of MCP16502 PMIC:
1) VDD_IO - Buck (1.2 - 3.7 V)
2) VDD_DDR - Buck (0.6 - 1.85 V)
3) VDD_CORE - Buck (0.6 - 1.85 V)
4) VDD_OTHER - BUCK (0.6 - 1.85 V)
5) LDO1 - LDO (1.2 - 3.7 V)
6) LDO2 - LDO (1.2 - 3.7 V)
Regulator modes:
2 - FPWM: higher precision, higher consumption
4 - AutoPFM: lower precision, lower consumption
Each regulator is defined using the standard binding for regulators.
Example:
mcp16502@5b {
compatible = "microchip,mcp16502";
reg = <0x5b>;
status = "okay";
lpm-gpios = <&pioBU 7 GPIO_ACTIVE_HIGH>;
regulators {
VDD_IO {
regulator-name = "VDD_IO";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3700000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
regulator-state-standby {
regulator-on-in-suspend;
regulator-mode = <4>;
};
regulator-state-mem {
regulator-off-in-suspend;
regulator-mode = <4>;
};
};
VDD_DDR {
regulator-name = "VDD_DDR";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1850000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
regulator-state-standby {
regulator-on-in-suspend;
regulator-mode = <4>;
};
regulator-state-mem {
regulator-on-in-suspend;
regulator-mode = <4>;
};
};
VDD_CORE {
regulator-name = "VDD_CORE";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1850000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
regulator-state-standby {
regulator-on-in-suspend;
regulator-mode = <4>;
};
regulator-state-mem {
regulator-off-in-suspend;
regulator-mode = <4>;
};
};
VDD_OTHER {
regulator-name = "VDD_OTHER";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1850000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
regulator-state-standby {
regulator-on-in-suspend;
regulator-mode = <4>;
};
regulator-state-mem {
regulator-off-in-suspend;
regulator-mode = <4>;
};
};
LDO1 {
regulator-name = "LDO1";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3700000>;
regulator-always-on;
regulator-state-standby {
regulator-on-in-suspend;
};
regulator-state-mem {
regulator-off-in-suspend;
};
};
LDO2 {
regulator-name = "LDO2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3700000>;
regulator-always-on;
regulator-state-standby {
regulator-on-in-suspend;
};
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};