| Maxim Integrated MAX98925/MAX98926/MAX98927 Speaker Amplifier |
| |
| This device supports I2C. |
| |
| Required properties: |
| |
| - compatible : should be one of the following |
| - "maxim,max98925" |
| - "maxim,max98926" |
| - "maxim,max98927" |
| |
| - vmon-slot-no : slot number used to send voltage information |
| or in inteleave mode this will be used as |
| interleave slot. |
| MAX98925/MAX98926 slot range : 0 ~ 30, Default : 0 |
| MAX98927 slot range : 0 ~ 15, Default : 0 |
| |
| - imon-slot-no : slot number used to send current information |
| MAX98925/MAX98926 slot range : 0 ~ 30, Default : 0 |
| MAX98927 slot range : 0 ~ 15, Default : 0 |
| |
| - interleave-mode : When using two MAX9892X in a system it is |
| possible to create ADC data that that will |
| overflow the frame size. Digital Audio Interleave |
| mode provides a means to output VMON and IMON data |
| from two devices on a single DOUT line when running |
| smaller frames sizes such as 32 BCLKS per LRCLK or |
| 48 BCLKS per LRCLK. |
| Range : 0 (off), 1 (on), Default : 0 |
| |
| - reg : the I2C address of the device for I2C |
| |
| Optional properties: |
| - reset-gpios : GPIO to reset the device |
| |
| Example: |
| |
| codec: max98927@3a { |
| compatible = "maxim,max98927"; |
| vmon-slot-no = <0>; |
| imon-slot-no = <1>; |
| interleave-mode = <0>; |
| reg = <0x3a>; |
| }; |
