| /* |
| * Copyright 2019 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| */ |
| #ifndef __SMU11_DRIVER_IF_NAVI10_H__ |
| #define __SMU11_DRIVER_IF_NAVI10_H__ |
| |
| // *** IMPORTANT *** |
| // SMU TEAM: Always increment the interface version if |
| // any structure is changed in this file |
| // Be aware of that the version should be updated in |
| // smu_v11_0.h, maybe rename is also needed. |
| // #define SMU11_DRIVER_IF_VERSION 0x33 |
| |
| #define PPTABLE_NV10_SMU_VERSION 8 |
| |
| #define NUM_GFXCLK_DPM_LEVELS 16 |
| #define NUM_SMNCLK_DPM_LEVELS 2 |
| #define NUM_SOCCLK_DPM_LEVELS 8 |
| #define NUM_MP0CLK_DPM_LEVELS 2 |
| #define NUM_DCLK_DPM_LEVELS 8 |
| #define NUM_VCLK_DPM_LEVELS 8 |
| #define NUM_DCEFCLK_DPM_LEVELS 8 |
| #define NUM_PHYCLK_DPM_LEVELS 8 |
| #define NUM_DISPCLK_DPM_LEVELS 8 |
| #define NUM_PIXCLK_DPM_LEVELS 8 |
| #define NUM_UCLK_DPM_LEVELS 4 |
| #define NUM_MP1CLK_DPM_LEVELS 2 |
| #define NUM_LINK_LEVELS 2 |
| |
| |
| #define MAX_GFXCLK_DPM_LEVEL (NUM_GFXCLK_DPM_LEVELS - 1) |
| #define MAX_SMNCLK_DPM_LEVEL (NUM_SMNCLK_DPM_LEVELS - 1) |
| #define MAX_SOCCLK_DPM_LEVEL (NUM_SOCCLK_DPM_LEVELS - 1) |
| #define MAX_MP0CLK_DPM_LEVEL (NUM_MP0CLK_DPM_LEVELS - 1) |
| #define MAX_DCLK_DPM_LEVEL (NUM_DCLK_DPM_LEVELS - 1) |
| #define MAX_VCLK_DPM_LEVEL (NUM_VCLK_DPM_LEVELS - 1) |
| #define MAX_DCEFCLK_DPM_LEVEL (NUM_DCEFCLK_DPM_LEVELS - 1) |
| #define MAX_DISPCLK_DPM_LEVEL (NUM_DISPCLK_DPM_LEVELS - 1) |
| #define MAX_PIXCLK_DPM_LEVEL (NUM_PIXCLK_DPM_LEVELS - 1) |
| #define MAX_PHYCLK_DPM_LEVEL (NUM_PHYCLK_DPM_LEVELS - 1) |
| #define MAX_UCLK_DPM_LEVEL (NUM_UCLK_DPM_LEVELS - 1) |
| #define MAX_MP1CLK_DPM_LEVEL (NUM_MP1CLK_DPM_LEVELS - 1) |
| #define MAX_LINK_LEVEL (NUM_LINK_LEVELS - 1) |
| |
| //Gemini Modes |
| #define PPSMC_GeminiModeNone 0 //Single GPU board |
| #define PPSMC_GeminiModeMaster 1 //Master GPU on a Gemini board |
| #define PPSMC_GeminiModeSlave 2 //Slave GPU on a Gemini board |
| |
| // Feature Control Defines |
| // DPM |
| #define FEATURE_DPM_PREFETCHER_BIT 0 |
| #define FEATURE_DPM_GFXCLK_BIT 1 |
| #define FEATURE_DPM_GFX_PACE_BIT 2 |
| #define FEATURE_DPM_UCLK_BIT 3 |
| #define FEATURE_DPM_SOCCLK_BIT 4 |
| #define FEATURE_DPM_MP0CLK_BIT 5 |
| #define FEATURE_DPM_LINK_BIT 6 |
| #define FEATURE_DPM_DCEFCLK_BIT 7 |
| #define FEATURE_MEM_VDDCI_SCALING_BIT 8 |
| #define FEATURE_MEM_MVDD_SCALING_BIT 9 |
| |
| //Idle |
| #define FEATURE_DS_GFXCLK_BIT 10 |
| #define FEATURE_DS_SOCCLK_BIT 11 |
| #define FEATURE_DS_LCLK_BIT 12 |
| #define FEATURE_DS_DCEFCLK_BIT 13 |
| #define FEATURE_DS_UCLK_BIT 14 |
| #define FEATURE_GFX_ULV_BIT 15 |
| #define FEATURE_FW_DSTATE_BIT 16 |
| #define FEATURE_GFXOFF_BIT 17 |
| #define FEATURE_BACO_BIT 18 |
| #define FEATURE_VCN_PG_BIT 19 |
| #define FEATURE_JPEG_PG_BIT 20 |
| #define FEATURE_USB_PG_BIT 21 |
| #define FEATURE_RSMU_SMN_CG_BIT 22 |
| //Throttler/Response |
| #define FEATURE_PPT_BIT 23 |
| #define FEATURE_TDC_BIT 24 |
| #define FEATURE_GFX_EDC_BIT 25 |
| #define FEATURE_APCC_PLUS_BIT 26 |
| #define FEATURE_GTHR_BIT 27 |
| #define FEATURE_ACDC_BIT 28 |
| #define FEATURE_VR0HOT_BIT 29 |
| #define FEATURE_VR1HOT_BIT 30 |
| #define FEATURE_FW_CTF_BIT 31 |
| #define FEATURE_FAN_CONTROL_BIT 32 |
| #define FEATURE_THERMAL_BIT 33 |
| #define FEATURE_GFX_DCS_BIT 34 |
| //VF |
| #define FEATURE_RM_BIT 35 |
| #define FEATURE_LED_DISPLAY_BIT 36 |
| //Other |
| #define FEATURE_GFX_SS_BIT 37 |
| #define FEATURE_OUT_OF_BAND_MONITOR_BIT 38 |
| #define FEATURE_TEMP_DEPENDENT_VMIN_BIT 39 |
| |
| #define FEATURE_MMHUB_PG_BIT 40 |
| #define FEATURE_ATHUB_PG_BIT 41 |
| #define FEATURE_APCC_DFLL_BIT 42 |
| #define FEATURE_SPARE_43_BIT 43 |
| #define FEATURE_SPARE_44_BIT 44 |
| #define FEATURE_SPARE_45_BIT 45 |
| #define FEATURE_SPARE_46_BIT 46 |
| #define FEATURE_SPARE_47_BIT 47 |
| #define FEATURE_SPARE_48_BIT 48 |
| #define FEATURE_SPARE_49_BIT 49 |
| #define FEATURE_SPARE_50_BIT 50 |
| #define FEATURE_SPARE_51_BIT 51 |
| #define FEATURE_SPARE_52_BIT 52 |
| #define FEATURE_SPARE_53_BIT 53 |
| #define FEATURE_SPARE_54_BIT 54 |
| #define FEATURE_SPARE_55_BIT 55 |
| #define FEATURE_SPARE_56_BIT 56 |
| #define FEATURE_SPARE_57_BIT 57 |
| #define FEATURE_SPARE_58_BIT 58 |
| #define FEATURE_SPARE_59_BIT 59 |
| #define FEATURE_SPARE_60_BIT 60 |
| #define FEATURE_SPARE_61_BIT 61 |
| #define FEATURE_SPARE_62_BIT 62 |
| #define FEATURE_SPARE_63_BIT 63 |
| #define NUM_FEATURES 64 |
| |
| // Debug Overrides Bitmask |
| #define DPM_OVERRIDE_DISABLE_SOCCLK_PID 0x00000001 |
| #define DPM_OVERRIDE_DISABLE_UCLK_PID 0x00000002 |
| #define DPM_OVERRIDE_DISABLE_VOLT_LINK_VCN_SOCCLK 0x00000004 |
| #define DPM_OVERRIDE_ENABLE_FREQ_LINK_VCLK_SOCCLK 0x00000008 |
| #define DPM_OVERRIDE_ENABLE_FREQ_LINK_DCLK_SOCCLK 0x00000010 |
| #define DPM_OVERRIDE_ENABLE_FREQ_LINK_GFXCLK_SOCCLK 0x00000020 |
| #define DPM_OVERRIDE_ENABLE_FREQ_LINK_GFXCLK_UCLK 0x00000040 |
| #define DPM_OVERRIDE_DISABLE_VOLT_LINK_DCE_SOCCLK 0x00000080 |
| #define DPM_OVERRIDE_DISABLE_VOLT_LINK_MP0_SOCCLK 0x00000100 |
| #define DPM_OVERRIDE_DISABLE_DFLL_PLL_SHUTDOWN 0x00000200 |
| #define DPM_OVERRIDE_DISABLE_MEMORY_TEMPERATURE_READ 0x00000400 |
| |
| // VR Mapping Bit Defines |
| #define VR_MAPPING_VR_SELECT_MASK 0x01 |
| #define VR_MAPPING_VR_SELECT_SHIFT 0x00 |
| |
| #define VR_MAPPING_PLANE_SELECT_MASK 0x02 |
| #define VR_MAPPING_PLANE_SELECT_SHIFT 0x01 |
| |
| // PSI Bit Defines |
| #define PSI_SEL_VR0_PLANE0_PSI0 0x01 |
| #define PSI_SEL_VR0_PLANE0_PSI1 0x02 |
| #define PSI_SEL_VR0_PLANE1_PSI0 0x04 |
| #define PSI_SEL_VR0_PLANE1_PSI1 0x08 |
| #define PSI_SEL_VR1_PLANE0_PSI0 0x10 |
| #define PSI_SEL_VR1_PLANE0_PSI1 0x20 |
| #define PSI_SEL_VR1_PLANE1_PSI0 0x40 |
| #define PSI_SEL_VR1_PLANE1_PSI1 0x80 |
| |
| // Throttler Control/Status Bits |
| #define THROTTLER_PADDING_BIT 0 |
| #define THROTTLER_TEMP_EDGE_BIT 1 |
| #define THROTTLER_TEMP_HOTSPOT_BIT 2 |
| #define THROTTLER_TEMP_MEM_BIT 3 |
| #define THROTTLER_TEMP_VR_GFX_BIT 4 |
| #define THROTTLER_TEMP_VR_MEM0_BIT 5 |
| #define THROTTLER_TEMP_VR_MEM1_BIT 6 |
| #define THROTTLER_TEMP_VR_SOC_BIT 7 |
| #define THROTTLER_TEMP_LIQUID0_BIT 8 |
| #define THROTTLER_TEMP_LIQUID1_BIT 9 |
| #define THROTTLER_TEMP_PLX_BIT 10 |
| #define THROTTLER_TEMP_SKIN_BIT 11 |
| #define THROTTLER_TDC_GFX_BIT 12 |
| #define THROTTLER_TDC_SOC_BIT 13 |
| #define THROTTLER_PPT0_BIT 14 |
| #define THROTTLER_PPT1_BIT 15 |
| #define THROTTLER_PPT2_BIT 16 |
| #define THROTTLER_PPT3_BIT 17 |
| #define THROTTLER_FIT_BIT 18 |
| #define THROTTLER_PPM_BIT 19 |
| #define THROTTLER_APCC_BIT 20 |
| |
| // FW DState Features Control Bits |
| #define FW_DSTATE_SOC_ULV_BIT 0 |
| #define FW_DSTATE_G6_HSR_BIT 1 |
| #define FW_DSTATE_G6_PHY_VDDCI_OFF_BIT 2 |
| #define FW_DSTATE_MP0_DS_BIT 3 |
| #define FW_DSTATE_SMN_DS_BIT 4 |
| #define FW_DSTATE_MP1_DS_BIT 5 |
| #define FW_DSTATE_MP1_WHISPER_MODE_BIT 6 |
| #define FW_DSTATE_LIV_MIN_BIT 7 |
| #define FW_DSTATE_SOC_PLL_PWRDN_BIT 8 |
| |
| #define FW_DSTATE_SOC_ULV_MASK (1 << FW_DSTATE_SOC_ULV_BIT ) |
| #define FW_DSTATE_G6_HSR_MASK (1 << FW_DSTATE_G6_HSR_BIT ) |
| #define FW_DSTATE_G6_PHY_VDDCI_OFF_MASK (1 << FW_DSTATE_G6_PHY_VDDCI_OFF_BIT ) |
| #define FW_DSTATE_MP1_DS_MASK (1 << FW_DSTATE_MP1_DS_BIT ) |
| #define FW_DSTATE_MP0_DS_MASK (1 << FW_DSTATE_MP0_DS_BIT ) |
| #define FW_DSTATE_SMN_DS_MASK (1 << FW_DSTATE_SMN_DS_BIT ) |
| #define FW_DSTATE_MP1_WHISPER_MODE_MASK (1 << FW_DSTATE_MP1_WHISPER_MODE_BIT ) |
| #define FW_DSTATE_LIV_MIN_MASK (1 << FW_DSTATE_LIV_MIN_BIT ) |
| #define FW_DSTATE_SOC_PLL_PWRDN_MASK (1 << FW_DSTATE_SOC_PLL_PWRDN_BIT ) |
| |
| //I2C Interface |
| |
| #define NUM_I2C_CONTROLLERS 8 |
| |
| #define I2C_CONTROLLER_ENABLED 1 |
| #define I2C_CONTROLLER_DISABLED 0 |
| |
| #define MAX_SW_I2C_COMMANDS 8 |
| |
| typedef enum { |
| I2C_CONTROLLER_PORT_0 = 0, //CKSVII2C0 |
| I2C_CONTROLLER_PORT_1 = 1, //CKSVII2C1 |
| I2C_CONTROLLER_PORT_COUNT, |
| } I2cControllerPort_e; |
| |
| typedef enum { |
| I2C_CONTROLLER_NAME_VR_GFX = 0, |
| I2C_CONTROLLER_NAME_VR_SOC, |
| I2C_CONTROLLER_NAME_VR_VDDCI, |
| I2C_CONTROLLER_NAME_VR_MVDD, |
| I2C_CONTROLLER_NAME_LIQUID0, |
| I2C_CONTROLLER_NAME_LIQUID1, |
| I2C_CONTROLLER_NAME_PLX, |
| I2C_CONTROLLER_NAME_SPARE, |
| I2C_CONTROLLER_NAME_COUNT, |
| } I2cControllerName_e; |
| |
| typedef enum { |
| I2C_CONTROLLER_THROTTLER_TYPE_NONE = 0, |
| I2C_CONTROLLER_THROTTLER_VR_GFX, |
| I2C_CONTROLLER_THROTTLER_VR_SOC, |
| I2C_CONTROLLER_THROTTLER_VR_VDDCI, |
| I2C_CONTROLLER_THROTTLER_VR_MVDD, |
| I2C_CONTROLLER_THROTTLER_LIQUID0, |
| I2C_CONTROLLER_THROTTLER_LIQUID1, |
| I2C_CONTROLLER_THROTTLER_PLX, |
| I2C_CONTROLLER_THROTTLER_COUNT, |
| } I2cControllerThrottler_e; |
| |
| typedef enum { |
| I2C_CONTROLLER_PROTOCOL_VR_0, |
| I2C_CONTROLLER_PROTOCOL_VR_1, |
| I2C_CONTROLLER_PROTOCOL_TMP_0, |
| I2C_CONTROLLER_PROTOCOL_TMP_1, |
| I2C_CONTROLLER_PROTOCOL_SPARE_0, |
| I2C_CONTROLLER_PROTOCOL_SPARE_1, |
| I2C_CONTROLLER_PROTOCOL_COUNT, |
| } I2cControllerProtocol_e; |
| |
| typedef struct { |
| uint8_t Enabled; |
| uint8_t Speed; |
| uint8_t Padding[2]; |
| uint32_t SlaveAddress; |
| uint8_t ControllerPort; |
| uint8_t ControllerName; |
| uint8_t ThermalThrotter; |
| uint8_t I2cProtocol; |
| } I2cControllerConfig_t; |
| |
| typedef enum { |
| I2C_PORT_SVD_SCL = 0, |
| I2C_PORT_GPIO, |
| } I2cPort_e; |
| |
| typedef enum { |
| I2C_SPEED_FAST_50K = 0, //50 Kbits/s |
| I2C_SPEED_FAST_100K, //100 Kbits/s |
| I2C_SPEED_FAST_400K, //400 Kbits/s |
| I2C_SPEED_FAST_PLUS_1M, //1 Mbits/s (in fast mode) |
| I2C_SPEED_HIGH_1M, //1 Mbits/s (in high speed mode) |
| I2C_SPEED_HIGH_2M, //2.3 Mbits/s |
| I2C_SPEED_COUNT, |
| } I2cSpeed_e; |
| |
| typedef enum { |
| I2C_CMD_READ = 0, |
| I2C_CMD_WRITE, |
| I2C_CMD_COUNT, |
| } I2cCmdType_e; |
| |
| #define CMDCONFIG_STOP_BIT 0 |
| #define CMDCONFIG_RESTART_BIT 1 |
| |
| #define CMDCONFIG_STOP_MASK (1 << CMDCONFIG_STOP_BIT) |
| #define CMDCONFIG_RESTART_MASK (1 << CMDCONFIG_RESTART_BIT) |
| |
| typedef struct { |
| uint8_t RegisterAddr; ////only valid for write, ignored for read |
| uint8_t Cmd; //Read(0) or Write(1) |
| uint8_t Data; //Return data for read. Data to send for write |
| uint8_t CmdConfig; //Includes whether associated command should have a stop or restart command |
| } SwI2cCmd_t; //SW I2C Command Table |
| |
| typedef struct { |
| uint8_t I2CcontrollerPort; //CKSVII2C0(0) or //CKSVII2C1(1) |
| uint8_t I2CSpeed; //Slow(0) or Fast(1) |
| uint16_t SlaveAddress; |
| uint8_t NumCmds; //Number of commands |
| uint8_t Padding[3]; |
| |
| SwI2cCmd_t SwI2cCmds[MAX_SW_I2C_COMMANDS]; |
| |
| uint32_t MmHubPadding[8]; // SMU internal use |
| |
| } SwI2cRequest_t; // SW I2C Request Table |
| |
| //D3HOT sequences |
| typedef enum { |
| BACO_SEQUENCE, |
| MSR_SEQUENCE, |
| BAMACO_SEQUENCE, |
| ULPS_SEQUENCE, |
| D3HOT_SEQUENCE_COUNT, |
| }D3HOTSequence_e; |
| |
| //THis is aligned with RSMU PGFSM Register Mapping |
| typedef enum { |
| PG_DYNAMIC_MODE = 0, |
| PG_STATIC_MODE, |
| } PowerGatingMode_e; |
| |
| //This is aligned with RSMU PGFSM Register Mapping |
| typedef enum { |
| PG_POWER_DOWN = 0, |
| PG_POWER_UP, |
| } PowerGatingSettings_e; |
| |
| typedef struct { |
| uint32_t a; // store in IEEE float format in this variable |
| uint32_t b; // store in IEEE float format in this variable |
| uint32_t c; // store in IEEE float format in this variable |
| } QuadraticInt_t; |
| |
| typedef struct { |
| uint32_t m; // store in IEEE float format in this variable |
| uint32_t b; // store in IEEE float format in this variable |
| } LinearInt_t; |
| |
| typedef struct { |
| uint32_t a; // store in IEEE float format in this variable |
| uint32_t b; // store in IEEE float format in this variable |
| uint32_t c; // store in IEEE float format in this variable |
| } DroopInt_t; |
| |
| typedef enum { |
| GFXCLK_SOURCE_PLL = 0, |
| GFXCLK_SOURCE_DFLL, |
| GFXCLK_SOURCE_COUNT, |
| } GfxclkSrc_e; |
| |
| //Only Clks that have DPM descriptors are listed here |
| typedef enum { |
| PPCLK_GFXCLK = 0, |
| PPCLK_SOCCLK, |
| PPCLK_UCLK, |
| PPCLK_DCLK, |
| PPCLK_VCLK, |
| PPCLK_DCEFCLK, |
| PPCLK_DISPCLK, |
| PPCLK_PIXCLK, |
| PPCLK_PHYCLK, |
| PPCLK_COUNT, |
| } PPCLK_e; |
| |
| typedef enum { |
| POWER_SOURCE_AC, |
| POWER_SOURCE_DC, |
| POWER_SOURCE_COUNT, |
| } POWER_SOURCE_e; |
| |
| typedef enum { |
| PPT_THROTTLER_PPT0, |
| PPT_THROTTLER_PPT1, |
| PPT_THROTTLER_PPT2, |
| PPT_THROTTLER_PPT3, |
| PPT_THROTTLER_COUNT |
| } PPT_THROTTLER_e; |
| |
| typedef enum { |
| VOLTAGE_MODE_AVFS = 0, |
| VOLTAGE_MODE_AVFS_SS, |
| VOLTAGE_MODE_SS, |
| VOLTAGE_MODE_COUNT, |
| } VOLTAGE_MODE_e; |
| |
| |
| typedef enum { |
| AVFS_VOLTAGE_GFX = 0, |
| AVFS_VOLTAGE_SOC, |
| AVFS_VOLTAGE_COUNT, |
| } AVFS_VOLTAGE_TYPE_e; |
| |
| typedef enum { |
| UCLK_DIV_BY_1 = 0, |
| UCLK_DIV_BY_2, |
| UCLK_DIV_BY_4, |
| UCLK_DIV_BY_8, |
| } UCLK_DIV_e; |
| |
| typedef enum { |
| GPIO_INT_POLARITY_ACTIVE_LOW = 0, |
| GPIO_INT_POLARITY_ACTIVE_HIGH, |
| } GpioIntPolarity_e; |
| |
| typedef enum { |
| MEMORY_TYPE_GDDR6 = 0, |
| MEMORY_TYPE_HBM, |
| } MemoryType_e; |
| |
| typedef enum { |
| PWR_CONFIG_TDP = 0, |
| PWR_CONFIG_TGP, |
| PWR_CONFIG_TCP_ESTIMATED, |
| PWR_CONFIG_TCP_MEASURED, |
| } PwrConfig_e; |
| |
| typedef struct { |
| uint8_t VoltageMode; // 0 - AVFS only, 1- min(AVFS,SS), 2-SS only |
| uint8_t SnapToDiscrete; // 0 - Fine grained DPM, 1 - Discrete DPM |
| uint8_t NumDiscreteLevels; // Set to 2 (Fmin, Fmax) when using fine grained DPM, otherwise set to # discrete levels used |
| uint8_t Padding; |
| LinearInt_t ConversionToAvfsClk; // Transfer function to AVFS Clock (GHz->GHz) |
| QuadraticInt_t SsCurve; // Slow-slow curve (GHz->V) |
| } DpmDescriptor_t; |
| |
| typedef enum { |
| TEMP_EDGE, |
| TEMP_HOTSPOT, |
| TEMP_MEM, |
| TEMP_VR_GFX, |
| TEMP_VR_MEM0, |
| TEMP_VR_MEM1, |
| TEMP_VR_SOC, |
| TEMP_LIQUID0, |
| TEMP_LIQUID1, |
| TEMP_PLX, |
| TEMP_COUNT |
| } TEMP_e; |
| |
| //Out of band monitor status defines |
| //see SPEC //gpu/doc/soc_arch/spec/feature/SMBUS/SMBUS.xlsx |
| #define POWER_MANAGER_CONTROLLER_NOT_RUNNING 0 |
| #define POWER_MANAGER_CONTROLLER_RUNNING 1 |
| |
| #define POWER_MANAGER_CONTROLLER_BIT 0 |
| #define MAXIMUM_DPM_STATE_GFX_ENGINE_RESTRICTED_BIT 8 |
| #define GPU_DIE_TEMPERATURE_THROTTLING_BIT 9 |
| #define HBM_DIE_TEMPERATURE_THROTTLING_BIT 10 |
| #define TGP_THROTTLING_BIT 11 |
| #define PCC_THROTTLING_BIT 12 |
| #define HBM_TEMPERATURE_EXCEEDING_TEMPERATURE_LIMIT_BIT 13 |
| #define HBM_TEMPERATURE_EXCEEDING_MAX_MEMORY_TEMPERATURE_BIT 14 |
| |
| #define POWER_MANAGER_CONTROLLER_MASK (1 << POWER_MANAGER_CONTROLLER_BIT ) |
| #define MAXIMUM_DPM_STATE_GFX_ENGINE_RESTRICTED_MASK (1 << MAXIMUM_DPM_STATE_GFX_ENGINE_RESTRICTED_BIT ) |
| #define GPU_DIE_TEMPERATURE_THROTTLING_MASK (1 << GPU_DIE_TEMPERATURE_THROTTLING_BIT ) |
| #define HBM_DIE_TEMPERATURE_THROTTLING_MASK (1 << HBM_DIE_TEMPERATURE_THROTTLING_BIT ) |
| #define TGP_THROTTLING_MASK (1 << TGP_THROTTLING_BIT ) |
| #define PCC_THROTTLING_MASK (1 << PCC_THROTTLING_BIT ) |
| #define HBM_TEMPERATURE_EXCEEDING_TEMPERATURE_LIMIT_MASK (1 << HBM_TEMPERATURE_EXCEEDING_TEMPERATURE_LIMIT_BIT ) |
| #define HBM_TEMPERATURE_EXCEEDING_MAX_MEMORY_TEMPERATURE_MASK (1 << HBM_TEMPERATURE_EXCEEDING_MAX_MEMORY_TEMPERATURE_BIT) |
| |
| //This structure to be DMA to SMBUS Config register space |
| typedef struct { |
| uint8_t MinorInfoVersion; |
| uint8_t MajorInfoVersion; |
| uint8_t TableSize; |
| uint8_t Reserved; |
| |
| uint8_t Reserved1; |
| uint8_t RevID; |
| uint16_t DeviceID; |
| |
| uint16_t DieTemperatureLimit; |
| uint16_t FanTargetTemperature; |
| |
| uint16_t MemoryTemperatureLimit; |
| uint16_t MemoryTemperatureLimit1; |
| |
| uint16_t TGP; |
| uint16_t CardPower; |
| |
| uint32_t DieTemperatureRegisterOffset; |
| |
| uint32_t Reserved2; |
| |
| uint32_t Reserved3; |
| |
| uint32_t Status; |
| |
| uint16_t DieTemperature; |
| uint16_t CurrentMemoryTemperature; |
| |
| uint16_t MemoryTemperature; |
| uint8_t MemoryHotspotPosition; |
| uint8_t Reserved4; |
| |
| uint32_t BoardLevelEnergyAccumulator; |
| } OutOfBandMonitor_t; |
| |
| typedef struct { |
| uint32_t Version; |
| |
| // SECTION: Feature Enablement |
| uint32_t FeaturesToRun[2]; |
| |
| // SECTION: Infrastructure Limits |
| uint16_t SocketPowerLimitAc[PPT_THROTTLER_COUNT]; |
| uint16_t SocketPowerLimitAcTau[PPT_THROTTLER_COUNT]; |
| uint16_t SocketPowerLimitDc[PPT_THROTTLER_COUNT]; |
| uint16_t SocketPowerLimitDcTau[PPT_THROTTLER_COUNT]; |
| |
| uint16_t TdcLimitSoc; // Amps |
| uint16_t TdcLimitSocTau; // Time constant of LPF in ms |
| uint16_t TdcLimitGfx; // Amps |
| uint16_t TdcLimitGfxTau; // Time constant of LPF in ms |
| |
| uint16_t TedgeLimit; // Celcius |
| uint16_t ThotspotLimit; // Celcius |
| uint16_t TmemLimit; // Celcius |
| uint16_t Tvr_gfxLimit; // Celcius |
| uint16_t Tvr_mem0Limit; // Celcius |
| uint16_t Tvr_mem1Limit; // Celcius |
| uint16_t Tvr_socLimit; // Celcius |
| uint16_t Tliquid0Limit; // Celcius |
| uint16_t Tliquid1Limit; // Celcius |
| uint16_t TplxLimit; // Celcius |
| uint32_t FitLimit; // Failures in time (failures per million parts over the defined lifetime) |
| |
| uint16_t PpmPowerLimit; // Switch this this power limit when temperature is above PpmTempThreshold |
| uint16_t PpmTemperatureThreshold; |
| |
| // SECTION: Throttler settings |
| uint32_t ThrottlerControlMask; // See Throtter masks defines |
| |
| // SECTION: FW DSTATE Settings |
| uint32_t FwDStateMask; // See FW DState masks defines |
| |
| // SECTION: ULV Settings |
| uint16_t UlvVoltageOffsetSoc; // In mV(Q2) |
| uint16_t UlvVoltageOffsetGfx; // In mV(Q2) |
| |
| uint8_t GceaLinkMgrIdleThreshold; //Set by SMU FW during enablment of SOC_ULV. Controls delay for GFX SDP port disconnection during idle events |
| uint8_t paddingRlcUlvParams[3]; |
| |
| uint8_t UlvSmnclkDid; //DID for ULV mode. 0 means CLK will not be modified in ULV. |
| uint8_t UlvMp1clkDid; //DID for ULV mode. 0 means CLK will not be modified in ULV. |
| uint8_t UlvGfxclkBypass; // 1 to turn off/bypass Gfxclk during ULV, 0 to leave Gfxclk on during ULV |
| uint8_t Padding234; |
| |
| uint16_t MinVoltageUlvGfx; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_GFX in ULV mode |
| uint16_t MinVoltageUlvSoc; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_SOC in ULV mode |
| |
| |
| // SECTION: Voltage Control Parameters |
| uint16_t MinVoltageGfx; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_GFX |
| uint16_t MinVoltageSoc; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_SOC |
| uint16_t MaxVoltageGfx; // In mV(Q2) Maximum Voltage allowable of VDD_GFX |
| uint16_t MaxVoltageSoc; // In mV(Q2) Maximum Voltage allowable of VDD_SOC |
| |
| uint16_t LoadLineResistanceGfx; // In mOhms with 8 fractional bits |
| uint16_t LoadLineResistanceSoc; // In mOhms with 8 fractional bits |
| |
| //SECTION: DPM Config 1 |
| DpmDescriptor_t DpmDescriptor[PPCLK_COUNT]; |
| |
| uint16_t FreqTableGfx [NUM_GFXCLK_DPM_LEVELS ]; // In MHz |
| uint16_t FreqTableVclk [NUM_VCLK_DPM_LEVELS ]; // In MHz |
| uint16_t FreqTableDclk [NUM_DCLK_DPM_LEVELS ]; // In MHz |
| uint16_t FreqTableSocclk [NUM_SOCCLK_DPM_LEVELS ]; // In MHz |
| uint16_t FreqTableUclk [NUM_UCLK_DPM_LEVELS ]; // In MHz |
| uint16_t FreqTableDcefclk [NUM_DCEFCLK_DPM_LEVELS ]; // In MHz |
| uint16_t FreqTableDispclk [NUM_DISPCLK_DPM_LEVELS ]; // In MHz |
| uint16_t FreqTablePixclk [NUM_PIXCLK_DPM_LEVELS ]; // In MHz |
| uint16_t FreqTablePhyclk [NUM_PHYCLK_DPM_LEVELS ]; // In MHz |
| uint32_t Paddingclks[16]; |
| |
| uint16_t DcModeMaxFreq [PPCLK_COUNT ]; // In MHz |
| uint16_t Padding8_Clks; |
| |
| uint8_t FreqTableUclkDiv [NUM_UCLK_DPM_LEVELS ]; // 0:Div-1, 1:Div-1/2, 2:Div-1/4, 3:Div-1/8 |
| |
| // SECTION: DPM Config 2 |
| uint16_t Mp0clkFreq [NUM_MP0CLK_DPM_LEVELS]; // in MHz |
| uint16_t Mp0DpmVoltage [NUM_MP0CLK_DPM_LEVELS]; // mV(Q2) |
| uint16_t MemVddciVoltage [NUM_UCLK_DPM_LEVELS]; // mV(Q2) |
| uint16_t MemMvddVoltage [NUM_UCLK_DPM_LEVELS]; // mV(Q2) |
| // GFXCLK DPM |
| uint16_t GfxclkFgfxoffEntry; // in Mhz |
| uint16_t GfxclkFinit; // in Mhz |
| uint16_t GfxclkFidle; // in MHz |
| uint16_t GfxclkSlewRate; // for PLL babystepping??? |
| uint16_t GfxclkFopt; // in Mhz |
| uint8_t Padding567[2]; |
| uint16_t GfxclkDsMaxFreq; // in MHz |
| uint8_t GfxclkSource; // 0 = PLL, 1 = DFLL |
| uint8_t Padding456; |
| |
| // UCLK section |
| uint8_t LowestUclkReservedForUlv; // Set this to 1 if UCLK DPM0 is reserved for ULV-mode only |
| uint8_t paddingUclk[3]; |
| |
| uint8_t MemoryType; // 0-GDDR6, 1-HBM |
| uint8_t MemoryChannels; |
| uint8_t PaddingMem[2]; |
| |
| // Link DPM Settings |
| uint8_t PcieGenSpeed[NUM_LINK_LEVELS]; ///< 0:PciE-gen1 1:PciE-gen2 2:PciE-gen3 3:PciE-gen4 |
| uint8_t PcieLaneCount[NUM_LINK_LEVELS]; ///< 1=x1, 2=x2, 3=x4, 4=x8, 5=x12, 6=x16 |
| uint16_t LclkFreq[NUM_LINK_LEVELS]; |
| |
| // GFXCLK Thermal DPM (formerly 'Boost' Settings) |
| uint16_t EnableTdpm; |
| uint16_t TdpmHighHystTemperature; |
| uint16_t TdpmLowHystTemperature; |
| uint16_t GfxclkFreqHighTempLimit; // High limit on GFXCLK when temperature is high, for reliability. |
| |
| // SECTION: Fan Control |
| uint16_t FanStopTemp; //Celcius |
| uint16_t FanStartTemp; //Celcius |
| |
| uint16_t FanGainEdge; |
| uint16_t FanGainHotspot; |
| uint16_t FanGainLiquid0; |
| uint16_t FanGainLiquid1; |
| uint16_t FanGainVrGfx; |
| uint16_t FanGainVrSoc; |
| uint16_t FanGainVrMem0; |
| uint16_t FanGainVrMem1; |
| uint16_t FanGainPlx; |
| uint16_t FanGainMem; |
| uint16_t FanPwmMin; |
| uint16_t FanAcousticLimitRpm; |
| uint16_t FanThrottlingRpm; |
| uint16_t FanMaximumRpm; |
| uint16_t FanTargetTemperature; |
| uint16_t FanTargetGfxclk; |
| uint8_t FanTempInputSelect; |
| uint8_t FanPadding; |
| uint8_t FanZeroRpmEnable; |
| uint8_t FanTachEdgePerRev; |
| //uint8_t padding8_Fan[2]; |
| |
| // The following are AFC override parameters. Leave at 0 to use FW defaults. |
| int16_t FuzzyFan_ErrorSetDelta; |
| int16_t FuzzyFan_ErrorRateSetDelta; |
| int16_t FuzzyFan_PwmSetDelta; |
| uint16_t FuzzyFan_Reserved; |
| |
| |
| // SECTION: AVFS |
| // Overrides |
| uint8_t OverrideAvfsGb[AVFS_VOLTAGE_COUNT]; |
| uint8_t Padding8_Avfs[2]; |
| |
| QuadraticInt_t qAvfsGb[AVFS_VOLTAGE_COUNT]; // GHz->V Override of fused curve |
| DroopInt_t dBtcGbGfxPll; // GHz->V BtcGb |
| DroopInt_t dBtcGbGfxDfll; // GHz->V BtcGb |
| DroopInt_t dBtcGbSoc; // GHz->V BtcGb |
| LinearInt_t qAgingGb[AVFS_VOLTAGE_COUNT]; // GHz->V |
| |
| QuadraticInt_t qStaticVoltageOffset[AVFS_VOLTAGE_COUNT]; // GHz->V |
| |
| uint16_t DcTol[AVFS_VOLTAGE_COUNT]; // mV Q2 |
| |
| uint8_t DcBtcEnabled[AVFS_VOLTAGE_COUNT]; |
| uint8_t Padding8_GfxBtc[2]; |
| |
| uint16_t DcBtcMin[AVFS_VOLTAGE_COUNT]; // mV Q2 |
| uint16_t DcBtcMax[AVFS_VOLTAGE_COUNT]; // mV Q2 |
| |
| // SECTION: Advanced Options |
| uint32_t DebugOverrides; |
| QuadraticInt_t ReservedEquation0; |
| QuadraticInt_t ReservedEquation1; |
| QuadraticInt_t ReservedEquation2; |
| QuadraticInt_t ReservedEquation3; |
| |
| // Total Power configuration, use defines from PwrConfig_e |
| uint8_t TotalPowerConfig; //0-TDP, 1-TGP, 2-TCP Estimated, 3-TCP Measured |
| uint8_t TotalPowerSpare1; |
| uint16_t TotalPowerSpare2; |
| |
| // APCC Settings |
| uint16_t PccThresholdLow; |
| uint16_t PccThresholdHigh; |
| uint32_t MGpuFanBoostLimitRpm; |
| uint32_t PaddingAPCC[5]; |
| |
| // Temperature Dependent Vmin |
| uint16_t VDDGFX_TVmin; //Celcius |
| uint16_t VDDSOC_TVmin; //Celcius |
| uint16_t VDDGFX_Vmin_HiTemp; // mV Q2 |
| uint16_t VDDGFX_Vmin_LoTemp; // mV Q2 |
| uint16_t VDDSOC_Vmin_HiTemp; // mV Q2 |
| uint16_t VDDSOC_Vmin_LoTemp; // mV Q2 |
| |
| uint16_t VDDGFX_TVminHystersis; // Celcius |
| uint16_t VDDSOC_TVminHystersis; // Celcius |
| |
| // BTC Setting |
| uint32_t BtcConfig; |
| |
| uint16_t SsFmin[10]; // PPtable value to function similar to VFTFmin for SS Curve; Size is PPCLK_COUNT rounded to nearest multiple of 2 |
| uint16_t DcBtcGb[AVFS_VOLTAGE_COUNT]; |
| |
| // SECTION: Board Reserved |
| uint32_t Reserved[8]; |
| |
| // SECTION: BOARD PARAMETERS |
| // I2C Control |
| I2cControllerConfig_t I2cControllers[NUM_I2C_CONTROLLERS]; |
| |
| // SVI2 Board Parameters |
| uint16_t MaxVoltageStepGfx; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value. |
| uint16_t MaxVoltageStepSoc; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value. |
| |
| uint8_t VddGfxVrMapping; // Use VR_MAPPING* bitfields |
| uint8_t VddSocVrMapping; // Use VR_MAPPING* bitfields |
| uint8_t VddMem0VrMapping; // Use VR_MAPPING* bitfields |
| uint8_t VddMem1VrMapping; // Use VR_MAPPING* bitfields |
| |
| uint8_t GfxUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode |
| uint8_t SocUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode |
| uint8_t ExternalSensorPresent; // External RDI connected to TMON (aka TEMP IN) |
| uint8_t Padding8_V; |
| |
| // Telemetry Settings |
| uint16_t GfxMaxCurrent; // in Amps |
| int8_t GfxOffset; // in Amps |
| uint8_t Padding_TelemetryGfx; |
| |
| uint16_t SocMaxCurrent; // in Amps |
| int8_t SocOffset; // in Amps |
| uint8_t Padding_TelemetrySoc; |
| |
| uint16_t Mem0MaxCurrent; // in Amps |
| int8_t Mem0Offset; // in Amps |
| uint8_t Padding_TelemetryMem0; |
| |
| uint16_t Mem1MaxCurrent; // in Amps |
| int8_t Mem1Offset; // in Amps |
| uint8_t Padding_TelemetryMem1; |
| |
| // GPIO Settings |
| uint8_t AcDcGpio; // GPIO pin configured for AC/DC switching |
| uint8_t AcDcPolarity; // GPIO polarity for AC/DC switching |
| uint8_t VR0HotGpio; // GPIO pin configured for VR0 HOT event |
| uint8_t VR0HotPolarity; // GPIO polarity for VR0 HOT event |
| |
| uint8_t VR1HotGpio; // GPIO pin configured for VR1 HOT event |
| uint8_t VR1HotPolarity; // GPIO polarity for VR1 HOT event |
| uint8_t GthrGpio; // GPIO pin configured for GTHR Event |
| uint8_t GthrPolarity; // replace GPIO polarity for GTHR |
| |
| // LED Display Settings |
| uint8_t LedPin0; // GPIO number for LedPin[0] |
| uint8_t LedPin1; // GPIO number for LedPin[1] |
| uint8_t LedPin2; // GPIO number for LedPin[2] |
| uint8_t padding8_4; |
| |
| // GFXCLK PLL Spread Spectrum |
| uint8_t PllGfxclkSpreadEnabled; // on or off |
| uint8_t PllGfxclkSpreadPercent; // Q4.4 |
| uint16_t PllGfxclkSpreadFreq; // kHz |
| |
| // GFXCLK DFLL Spread Spectrum |
| uint8_t DfllGfxclkSpreadEnabled; // on or off |
| uint8_t DfllGfxclkSpreadPercent; // Q4.4 |
| uint16_t DfllGfxclkSpreadFreq; // kHz |
| |
| // UCLK Spread Spectrum |
| uint8_t UclkSpreadEnabled; // on or off |
| uint8_t UclkSpreadPercent; // Q4.4 |
| uint16_t UclkSpreadFreq; // kHz |
| |
| // SOCCLK Spread Spectrum |
| uint8_t SoclkSpreadEnabled; // on or off |
| uint8_t SocclkSpreadPercent; // Q4.4 |
| uint16_t SocclkSpreadFreq; // kHz |
| |
| // Total board power |
| uint16_t TotalBoardPower; //Only needed for TCP Estimated case, where TCP = TGP+Total Board Power |
| uint16_t BoardPadding; |
| |
| // Mvdd Svi2 Div Ratio Setting |
| uint32_t MvddRatio; // This is used for MVDD Vid workaround. It has 16 fractional bits (Q16.16) |
| |
| uint8_t RenesesLoadLineEnabled; |
| uint8_t GfxLoadlineResistance; |
| uint8_t SocLoadlineResistance; |
| uint8_t Padding8_Loadline; |
| |
| uint32_t BoardReserved[8]; |
| |
| // Padding for MMHUB - do not modify this |
| uint32_t MmHubPadding[8]; // SMU internal use |
| |
| } PPTable_t; |
| |
| typedef struct { |
| // Time constant parameters for clock averages in ms |
| uint16_t GfxclkAverageLpfTau; |
| uint16_t SocclkAverageLpfTau; |
| uint16_t UclkAverageLpfTau; |
| uint16_t GfxActivityLpfTau; |
| uint16_t UclkActivityLpfTau; |
| uint16_t SocketPowerLpfTau; |
| |
| // Padding - ignore |
| uint32_t MmHubPadding[8]; // SMU internal use |
| } DriverSmuConfig_t; |
| |
| typedef struct { |
| |
| uint16_t GfxclkFmin; // MHz |
| uint16_t GfxclkFmax; // MHz |
| uint16_t GfxclkFreq1; // MHz |
| uint16_t GfxclkVolt1; // mV (Q2) |
| uint16_t GfxclkFreq2; // MHz |
| uint16_t GfxclkVolt2; // mV (Q2) |
| uint16_t GfxclkFreq3; // MHz |
| uint16_t GfxclkVolt3; // mV (Q2) |
| uint16_t UclkFmax; // MHz |
| int16_t OverDrivePct; // % |
| uint16_t FanMaximumRpm; |
| uint16_t FanMinimumPwm; |
| uint16_t FanTargetTemperature; // Degree Celcius |
| uint16_t FanMode; |
| uint16_t FanMaxPwm; |
| uint16_t FanMinPwm; |
| uint16_t FanMaxTemp; // Degree Celcius |
| uint16_t FanMinTemp; // Degree Celcius |
| uint16_t MaxOpTemp; // Degree Celcius |
| uint16_t FanZeroRpmEnable; |
| |
| uint32_t MmHubPadding[6]; // SMU internal use |
| |
| } OverDriveTable_t; |
| |
| typedef struct { |
| uint16_t CurrClock[PPCLK_COUNT]; |
| uint16_t AverageGfxclkFrequency; |
| uint16_t AverageSocclkFrequency; |
| uint16_t AverageUclkFrequency ; |
| uint16_t AverageGfxActivity ; |
| uint16_t AverageUclkActivity ; |
| uint8_t CurrSocVoltageOffset ; |
| uint8_t CurrGfxVoltageOffset ; |
| uint8_t CurrMemVidOffset ; |
| uint8_t Padding8 ; |
| uint16_t AverageSocketPower ; |
| uint16_t TemperatureEdge ; |
| uint16_t TemperatureHotspot ; |
| uint16_t TemperatureMem ; |
| uint16_t TemperatureVrGfx ; |
| uint16_t TemperatureVrMem0 ; |
| uint16_t TemperatureVrMem1 ; |
| uint16_t TemperatureVrSoc ; |
| uint16_t TemperatureLiquid0 ; |
| uint16_t TemperatureLiquid1 ; |
| uint16_t TemperaturePlx ; |
| uint16_t Padding16 ; |
| uint32_t ThrottlerStatus ; |
| |
| uint8_t LinkDpmLevel; |
| uint8_t Padding8_2; |
| uint16_t CurrFanSpeed; |
| |
| // Padding - ignore |
| uint32_t MmHubPadding[8]; // SMU internal use |
| } SmuMetrics_legacy_t; |
| |
| typedef struct { |
| uint16_t CurrClock[PPCLK_COUNT]; |
| uint16_t AverageGfxclkFrequencyPostDs; |
| uint16_t AverageSocclkFrequency; |
| uint16_t AverageUclkFrequencyPostDs; |
| uint16_t AverageGfxActivity ; |
| uint16_t AverageUclkActivity ; |
| uint8_t CurrSocVoltageOffset ; |
| uint8_t CurrGfxVoltageOffset ; |
| uint8_t CurrMemVidOffset ; |
| uint8_t Padding8 ; |
| uint16_t AverageSocketPower ; |
| uint16_t TemperatureEdge ; |
| uint16_t TemperatureHotspot ; |
| uint16_t TemperatureMem ; |
| uint16_t TemperatureVrGfx ; |
| uint16_t TemperatureVrMem0 ; |
| uint16_t TemperatureVrMem1 ; |
| uint16_t TemperatureVrSoc ; |
| uint16_t TemperatureLiquid0 ; |
| uint16_t TemperatureLiquid1 ; |
| uint16_t TemperaturePlx ; |
| uint16_t Padding16 ; |
| uint32_t ThrottlerStatus ; |
| |
| uint8_t LinkDpmLevel; |
| uint8_t Padding8_2; |
| uint16_t CurrFanSpeed; |
| |
| uint16_t AverageGfxclkFrequencyPreDs; |
| uint16_t AverageUclkFrequencyPreDs; |
| uint8_t PcieRate; |
| uint8_t PcieWidth; |
| uint8_t Padding8_3[2]; |
| |
| // Padding - ignore |
| uint32_t MmHubPadding[8]; // SMU internal use |
| } SmuMetrics_t; |
| |
| typedef struct { |
| uint16_t CurrClock[PPCLK_COUNT]; |
| uint16_t AverageGfxclkFrequency; |
| uint16_t AverageSocclkFrequency; |
| uint16_t AverageUclkFrequency ; |
| uint16_t AverageGfxActivity ; |
| uint16_t AverageUclkActivity ; |
| uint8_t CurrSocVoltageOffset ; |
| uint8_t CurrGfxVoltageOffset ; |
| uint8_t CurrMemVidOffset ; |
| uint8_t Padding8 ; |
| uint16_t AverageSocketPower ; |
| uint16_t TemperatureEdge ; |
| uint16_t TemperatureHotspot ; |
| uint16_t TemperatureMem ; |
| uint16_t TemperatureVrGfx ; |
| uint16_t TemperatureVrMem0 ; |
| uint16_t TemperatureVrMem1 ; |
| uint16_t TemperatureVrSoc ; |
| uint16_t TemperatureLiquid0 ; |
| uint16_t TemperatureLiquid1 ; |
| uint16_t TemperaturePlx ; |
| uint16_t Padding16 ; |
| uint32_t ThrottlerStatus ; |
| |
| uint8_t LinkDpmLevel; |
| uint8_t Padding8_2; |
| uint16_t CurrFanSpeed; |
| |
| uint32_t EnergyAccumulator; |
| uint16_t AverageVclkFrequency ; |
| uint16_t AverageDclkFrequency ; |
| uint16_t VcnActivityPercentage ; |
| uint16_t padding16_2; |
| |
| // Padding - ignore |
| uint32_t MmHubPadding[8]; // SMU internal use |
| } SmuMetrics_NV12_legacy_t; |
| |
| typedef struct { |
| uint16_t CurrClock[PPCLK_COUNT]; |
| uint16_t AverageGfxclkFrequencyPostDs; |
| uint16_t AverageSocclkFrequency; |
| uint16_t AverageUclkFrequencyPostDs; |
| uint16_t AverageGfxActivity ; |
| uint16_t AverageUclkActivity ; |
| uint8_t CurrSocVoltageOffset ; |
| uint8_t CurrGfxVoltageOffset ; |
| uint8_t CurrMemVidOffset ; |
| uint8_t Padding8 ; |
| uint16_t AverageSocketPower ; |
| uint16_t TemperatureEdge ; |
| uint16_t TemperatureHotspot ; |
| uint16_t TemperatureMem ; |
| uint16_t TemperatureVrGfx ; |
| uint16_t TemperatureVrMem0 ; |
| uint16_t TemperatureVrMem1 ; |
| uint16_t TemperatureVrSoc ; |
| uint16_t TemperatureLiquid0 ; |
| uint16_t TemperatureLiquid1 ; |
| uint16_t TemperaturePlx ; |
| uint16_t Padding16 ; |
| uint32_t ThrottlerStatus ; |
| |
| uint8_t LinkDpmLevel; |
| uint8_t Padding8_2; |
| uint16_t CurrFanSpeed; |
| |
| uint16_t AverageVclkFrequency ; |
| uint16_t AverageDclkFrequency ; |
| uint16_t VcnActivityPercentage ; |
| uint16_t AverageGfxclkFrequencyPreDs; |
| uint16_t AverageUclkFrequencyPreDs; |
| uint8_t PcieRate; |
| uint8_t PcieWidth; |
| |
| uint32_t Padding32_1; |
| uint64_t EnergyAccumulator; |
| |
| // Padding - ignore |
| uint32_t MmHubPadding[8]; // SMU internal use |
| } SmuMetrics_NV12_t; |
| |
| typedef union SmuMetrics { |
| SmuMetrics_legacy_t nv10_legacy_metrics; |
| SmuMetrics_t nv10_metrics; |
| SmuMetrics_NV12_legacy_t nv12_legacy_metrics; |
| SmuMetrics_NV12_t nv12_metrics; |
| } SmuMetrics_NV1X_t; |
| |
| typedef struct { |
| uint16_t MinClock; // This is either DCEFCLK or SOCCLK (in MHz) |
| uint16_t MaxClock; // This is either DCEFCLK or SOCCLK (in MHz) |
| uint16_t MinUclk; |
| uint16_t MaxUclk; |
| |
| uint8_t WmSetting; |
| uint8_t Padding[3]; |
| |
| uint32_t MmHubPadding[8]; // SMU internal use |
| } WatermarkRowGeneric_t; |
| |
| #define NUM_WM_RANGES 4 |
| |
| typedef enum { |
| WM_SOCCLK = 0, |
| WM_DCEFCLK, |
| WM_COUNT, |
| } WM_CLOCK_e; |
| |
| typedef struct { |
| // Watermarks |
| WatermarkRowGeneric_t WatermarkRow[WM_COUNT][NUM_WM_RANGES]; |
| |
| uint32_t MmHubPadding[8]; // SMU internal use |
| } Watermarks_t; |
| |
| typedef struct { |
| uint16_t avgPsmCount[28]; |
| uint16_t minPsmCount[28]; |
| float avgPsmVoltage[28]; |
| float minPsmVoltage[28]; |
| |
| uint32_t MmHubPadding[32]; // SMU internal use |
| } AvfsDebugTable_t_NV14; |
| |
| typedef struct { |
| uint16_t avgPsmCount[36]; |
| uint16_t minPsmCount[36]; |
| float avgPsmVoltage[36]; |
| float minPsmVoltage[36]; |
| |
| uint32_t MmHubPadding[8]; // SMU internal use |
| } AvfsDebugTable_t_NV10; |
| |
| typedef struct { |
| uint8_t AvfsVersion; |
| uint8_t Padding; |
| |
| uint8_t AvfsEn[AVFS_VOLTAGE_COUNT]; |
| |
| uint8_t OverrideVFT[AVFS_VOLTAGE_COUNT]; |
| uint8_t OverrideAvfsGb[AVFS_VOLTAGE_COUNT]; |
| |
| uint8_t OverrideTemperatures[AVFS_VOLTAGE_COUNT]; |
| uint8_t OverrideVInversion[AVFS_VOLTAGE_COUNT]; |
| uint8_t OverrideP2V[AVFS_VOLTAGE_COUNT]; |
| uint8_t OverrideP2VCharzFreq[AVFS_VOLTAGE_COUNT]; |
| |
| int32_t VFT0_m1[AVFS_VOLTAGE_COUNT]; // Q8.24 |
| int32_t VFT0_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 |
| int32_t VFT0_b[AVFS_VOLTAGE_COUNT]; // Q32 |
| |
| int32_t VFT1_m1[AVFS_VOLTAGE_COUNT]; // Q8.16 |
| int32_t VFT1_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 |
| int32_t VFT1_b[AVFS_VOLTAGE_COUNT]; // Q32 |
| |
| int32_t VFT2_m1[AVFS_VOLTAGE_COUNT]; // Q8.16 |
| int32_t VFT2_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 |
| int32_t VFT2_b[AVFS_VOLTAGE_COUNT]; // Q32 |
| |
| int32_t AvfsGb0_m1[AVFS_VOLTAGE_COUNT]; // Q8.24 |
| int32_t AvfsGb0_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 |
| int32_t AvfsGb0_b[AVFS_VOLTAGE_COUNT]; // Q32 |
| |
| int32_t AcBtcGb_m1[AVFS_VOLTAGE_COUNT]; // Q8.24 |
| int32_t AcBtcGb_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 |
| int32_t AcBtcGb_b[AVFS_VOLTAGE_COUNT]; // Q32 |
| |
| uint32_t AvfsTempCold[AVFS_VOLTAGE_COUNT]; |
| uint32_t AvfsTempMid[AVFS_VOLTAGE_COUNT]; |
| uint32_t AvfsTempHot[AVFS_VOLTAGE_COUNT]; |
| |
| uint32_t VInversion[AVFS_VOLTAGE_COUNT]; // in mV with 2 fractional bits |
| |
| |
| int32_t P2V_m1[AVFS_VOLTAGE_COUNT]; // Q8.24 |
| int32_t P2V_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 |
| int32_t P2V_b[AVFS_VOLTAGE_COUNT]; // Q32 |
| |
| uint32_t P2VCharzFreq[AVFS_VOLTAGE_COUNT]; // in 10KHz units |
| |
| uint32_t EnabledAvfsModules[2]; //NV10 - 36 AVFS modules |
| |
| uint32_t MmHubPadding[8]; // SMU internal use |
| } AvfsFuseOverride_t; |
| |
| typedef struct { |
| |
| uint8_t Gfx_ActiveHystLimit; |
| uint8_t Gfx_IdleHystLimit; |
| uint8_t Gfx_FPS; |
| uint8_t Gfx_MinActiveFreqType; |
| uint8_t Gfx_BoosterFreqType; |
| uint8_t Gfx_MinFreqStep; // Minimum delta between current and target frequeny in order for FW to change clock. |
| uint16_t Gfx_MinActiveFreq; // MHz |
| uint16_t Gfx_BoosterFreq; // MHz |
| uint16_t Gfx_PD_Data_time_constant; // Time constant of PD controller in ms |
| uint32_t Gfx_PD_Data_limit_a; // Q16 |
| uint32_t Gfx_PD_Data_limit_b; // Q16 |
| uint32_t Gfx_PD_Data_limit_c; // Q16 |
| uint32_t Gfx_PD_Data_error_coeff; // Q16 |
| uint32_t Gfx_PD_Data_error_rate_coeff; // Q16 |
| |
| uint8_t Soc_ActiveHystLimit; |
| uint8_t Soc_IdleHystLimit; |
| uint8_t Soc_FPS; |
| uint8_t Soc_MinActiveFreqType; |
| uint8_t Soc_BoosterFreqType; |
| uint8_t Soc_MinFreqStep; // Minimum delta between current and target frequeny in order for FW to change clock. |
| uint16_t Soc_MinActiveFreq; // MHz |
| uint16_t Soc_BoosterFreq; // MHz |
| uint16_t Soc_PD_Data_time_constant; // Time constant of PD controller in ms |
| uint32_t Soc_PD_Data_limit_a; // Q16 |
| uint32_t Soc_PD_Data_limit_b; // Q16 |
| uint32_t Soc_PD_Data_limit_c; // Q16 |
| uint32_t Soc_PD_Data_error_coeff; // Q16 |
| uint32_t Soc_PD_Data_error_rate_coeff; // Q16 |
| |
| uint8_t Mem_ActiveHystLimit; |
| uint8_t Mem_IdleHystLimit; |
| uint8_t Mem_FPS; |
| uint8_t Mem_MinActiveFreqType; |
| uint8_t Mem_BoosterFreqType; |
| uint8_t Mem_MinFreqStep; // Minimum delta between current and target frequeny in order for FW to change clock. |
| uint16_t Mem_MinActiveFreq; // MHz |
| uint16_t Mem_BoosterFreq; // MHz |
| uint16_t Mem_PD_Data_time_constant; // Time constant of PD controller in ms |
| uint32_t Mem_PD_Data_limit_a; // Q16 |
| uint32_t Mem_PD_Data_limit_b; // Q16 |
| uint32_t Mem_PD_Data_limit_c; // Q16 |
| uint32_t Mem_PD_Data_error_coeff; // Q16 |
| uint32_t Mem_PD_Data_error_rate_coeff; // Q16 |
| |
| uint32_t Mem_UpThreshold_Limit; // Q16 |
| uint8_t Mem_UpHystLimit; |
| uint8_t Mem_DownHystLimit; |
| uint16_t Mem_Fps; |
| |
| uint32_t MmHubPadding[8]; // SMU internal use |
| |
| } DpmActivityMonitorCoeffInt_t; |
| |
| |
| // Workload bits |
| #define WORKLOAD_PPLIB_DEFAULT_BIT 0 |
| #define WORKLOAD_PPLIB_FULL_SCREEN_3D_BIT 1 |
| #define WORKLOAD_PPLIB_POWER_SAVING_BIT 2 |
| #define WORKLOAD_PPLIB_VIDEO_BIT 3 |
| #define WORKLOAD_PPLIB_VR_BIT 4 |
| #define WORKLOAD_PPLIB_COMPUTE_BIT 5 |
| #define WORKLOAD_PPLIB_CUSTOM_BIT 6 |
| #define WORKLOAD_PPLIB_COUNT 7 |
| |
| |
| // These defines are used with the following messages: |
| // SMC_MSG_TransferTableDram2Smu |
| // SMC_MSG_TransferTableSmu2Dram |
| |
| // Table transfer status |
| #define TABLE_TRANSFER_OK 0x0 |
| #define TABLE_TRANSFER_FAILED 0xFF |
| |
| // Table types |
| #define TABLE_PPTABLE 0 |
| #define TABLE_WATERMARKS 1 |
| #define TABLE_AVFS 2 |
| #define TABLE_AVFS_PSM_DEBUG 3 |
| #define TABLE_AVFS_FUSE_OVERRIDE 4 |
| #define TABLE_PMSTATUSLOG 5 |
| #define TABLE_SMU_METRICS 6 |
| #define TABLE_DRIVER_SMU_CONFIG 7 |
| #define TABLE_ACTIVITY_MONITOR_COEFF 8 |
| #define TABLE_OVERDRIVE 9 |
| #define TABLE_I2C_COMMANDS 10 |
| #define TABLE_PACE 11 |
| #define TABLE_COUNT 12 |
| |
| //RLC Pace Table total number of levels |
| #define RLC_PACE_TABLE_NUM_LEVELS 16 |
| |
| typedef struct { |
| float FlopsPerByteTable[RLC_PACE_TABLE_NUM_LEVELS]; |
| |
| uint32_t MmHubPadding[8]; // SMU internal use |
| } RlcPaceFlopsPerByteOverride_t; |
| |
| // These defines are used with the SMC_MSG_SetUclkFastSwitch message. |
| #define UCLK_SWITCH_SLOW 0 |
| #define UCLK_SWITCH_FAST 1 |
| #endif |
