| // SPDX-License-Identifier: GPL-2.0 |
| /* Copyright(c) 2013 - 2021 Intel Corporation. */ |
| |
| #include <linux/etherdevice.h> |
| #include <linux/of_net.h> |
| #include <linux/pci.h> |
| #include <linux/bpf.h> |
| #include <generated/utsrelease.h> |
| #include <linux/crash_dump.h> |
| |
| /* Local includes */ |
| #include "i40e.h" |
| #include "i40e_diag.h" |
| #include "i40e_xsk.h" |
| #include <net/udp_tunnel.h> |
| #include <net/xdp_sock_drv.h> |
| /* All i40e tracepoints are defined by the include below, which |
| * must be included exactly once across the whole kernel with |
| * CREATE_TRACE_POINTS defined |
| */ |
| #define CREATE_TRACE_POINTS |
| #include "i40e_trace.h" |
| |
| const char i40e_driver_name[] = "i40e"; |
| static const char i40e_driver_string[] = |
| "Intel(R) Ethernet Connection XL710 Network Driver"; |
| |
| static const char i40e_copyright[] = "Copyright (c) 2013 - 2019 Intel Corporation."; |
| |
| /* a bit of forward declarations */ |
| static void i40e_vsi_reinit_locked(struct i40e_vsi *vsi); |
| static void i40e_handle_reset_warning(struct i40e_pf *pf, bool lock_acquired); |
| static int i40e_add_vsi(struct i40e_vsi *vsi); |
| static int i40e_add_veb(struct i40e_veb *veb, struct i40e_vsi *vsi); |
| static int i40e_setup_pf_switch(struct i40e_pf *pf, bool reinit, bool lock_acquired); |
| static int i40e_setup_misc_vector(struct i40e_pf *pf); |
| static void i40e_determine_queue_usage(struct i40e_pf *pf); |
| static int i40e_setup_pf_filter_control(struct i40e_pf *pf); |
| static void i40e_prep_for_reset(struct i40e_pf *pf); |
| static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit, |
| bool lock_acquired); |
| static int i40e_reset(struct i40e_pf *pf); |
| static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired); |
| static int i40e_setup_misc_vector_for_recovery_mode(struct i40e_pf *pf); |
| static int i40e_restore_interrupt_scheme(struct i40e_pf *pf); |
| static bool i40e_check_recovery_mode(struct i40e_pf *pf); |
| static int i40e_init_recovery_mode(struct i40e_pf *pf, struct i40e_hw *hw); |
| static void i40e_fdir_sb_setup(struct i40e_pf *pf); |
| static int i40e_veb_get_bw_info(struct i40e_veb *veb); |
| static int i40e_get_capabilities(struct i40e_pf *pf, |
| enum i40e_admin_queue_opc list_type); |
| static bool i40e_is_total_port_shutdown_enabled(struct i40e_pf *pf); |
| |
| /* i40e_pci_tbl - PCI Device ID Table |
| * |
| * Last entry must be all 0s |
| * |
| * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, |
| * Class, Class Mask, private data (not used) } |
| */ |
| static const struct pci_device_id i40e_pci_tbl[] = { |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_SFP_XL710), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_QEMU), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_KX_B), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_KX_C), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_QSFP_A), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_QSFP_B), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_QSFP_C), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_10G_BASE_T), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_10G_BASE_T4), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_10G_BASE_T_BC), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_10G_SFP), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_10G_B), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_KX_X722), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_QSFP_X722), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_SFP_X722), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_1G_BASE_T_X722), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_10G_BASE_T_X722), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_SFP_I_X722), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_20G_KR2), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_20G_KR2_A), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_X710_N3000), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_XXV710_N3000), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_25G_B), 0}, |
| {PCI_VDEVICE(INTEL, I40E_DEV_ID_25G_SFP28), 0}, |
| /* required last entry */ |
| {0, } |
| }; |
| MODULE_DEVICE_TABLE(pci, i40e_pci_tbl); |
| |
| #define I40E_MAX_VF_COUNT 128 |
| static int debug = -1; |
| module_param(debug, uint, 0); |
| MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all), Debug mask (0x8XXXXXXX)"); |
| |
| MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>"); |
| MODULE_DESCRIPTION("Intel(R) Ethernet Connection XL710 Network Driver"); |
| MODULE_LICENSE("GPL v2"); |
| |
| static struct workqueue_struct *i40e_wq; |
| |
| /** |
| * i40e_allocate_dma_mem_d - OS specific memory alloc for shared code |
| * @hw: pointer to the HW structure |
| * @mem: ptr to mem struct to fill out |
| * @size: size of memory requested |
| * @alignment: what to align the allocation to |
| **/ |
| int i40e_allocate_dma_mem_d(struct i40e_hw *hw, struct i40e_dma_mem *mem, |
| u64 size, u32 alignment) |
| { |
| struct i40e_pf *pf = (struct i40e_pf *)hw->back; |
| |
| mem->size = ALIGN(size, alignment); |
| mem->va = dma_alloc_coherent(&pf->pdev->dev, mem->size, &mem->pa, |
| GFP_KERNEL); |
| if (!mem->va) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| /** |
| * i40e_free_dma_mem_d - OS specific memory free for shared code |
| * @hw: pointer to the HW structure |
| * @mem: ptr to mem struct to free |
| **/ |
| int i40e_free_dma_mem_d(struct i40e_hw *hw, struct i40e_dma_mem *mem) |
| { |
| struct i40e_pf *pf = (struct i40e_pf *)hw->back; |
| |
| dma_free_coherent(&pf->pdev->dev, mem->size, mem->va, mem->pa); |
| mem->va = NULL; |
| mem->pa = 0; |
| mem->size = 0; |
| |
| return 0; |
| } |
| |
| /** |
| * i40e_allocate_virt_mem_d - OS specific memory alloc for shared code |
| * @hw: pointer to the HW structure |
| * @mem: ptr to mem struct to fill out |
| * @size: size of memory requested |
| **/ |
| int i40e_allocate_virt_mem_d(struct i40e_hw *hw, struct i40e_virt_mem *mem, |
| u32 size) |
| { |
| mem->size = size; |
| mem->va = kzalloc(size, GFP_KERNEL); |
| |
| if (!mem->va) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| /** |
| * i40e_free_virt_mem_d - OS specific memory free for shared code |
| * @hw: pointer to the HW structure |
| * @mem: ptr to mem struct to free |
| **/ |
| int i40e_free_virt_mem_d(struct i40e_hw *hw, struct i40e_virt_mem *mem) |
| { |
| /* it's ok to kfree a NULL pointer */ |
| kfree(mem->va); |
| mem->va = NULL; |
| mem->size = 0; |
| |
| return 0; |
| } |
| |
| /** |
| * i40e_get_lump - find a lump of free generic resource |
| * @pf: board private structure |
| * @pile: the pile of resource to search |
| * @needed: the number of items needed |
| * @id: an owner id to stick on the items assigned |
| * |
| * Returns the base item index of the lump, or negative for error |
| * |
| * The search_hint trick and lack of advanced fit-finding only work |
| * because we're highly likely to have all the same size lump requests. |
| * Linear search time and any fragmentation should be minimal. |
| **/ |
| static int i40e_get_lump(struct i40e_pf *pf, struct i40e_lump_tracking *pile, |
| u16 needed, u16 id) |
| { |
| int ret = -ENOMEM; |
| int i, j; |
| |
| if (!pile || needed == 0 || id >= I40E_PILE_VALID_BIT) { |
| dev_info(&pf->pdev->dev, |
| "param err: pile=%s needed=%d id=0x%04x\n", |
| pile ? "<valid>" : "<null>", needed, id); |
| return -EINVAL; |
| } |
| |
| /* start the linear search with an imperfect hint */ |
| i = pile->search_hint; |
| while (i < pile->num_entries) { |
| /* skip already allocated entries */ |
| if (pile->list[i] & I40E_PILE_VALID_BIT) { |
| i++; |
| continue; |
| } |
| |
| /* do we have enough in this lump? */ |
| for (j = 0; (j < needed) && ((i+j) < pile->num_entries); j++) { |
| if (pile->list[i+j] & I40E_PILE_VALID_BIT) |
| break; |
| } |
| |
| if (j == needed) { |
| /* there was enough, so assign it to the requestor */ |
| for (j = 0; j < needed; j++) |
| pile->list[i+j] = id | I40E_PILE_VALID_BIT; |
| ret = i; |
| pile->search_hint = i + j; |
| break; |
| } |
| |
| /* not enough, so skip over it and continue looking */ |
| i += j; |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * i40e_put_lump - return a lump of generic resource |
| * @pile: the pile of resource to search |
| * @index: the base item index |
| * @id: the owner id of the items assigned |
| * |
| * Returns the count of items in the lump |
| **/ |
| static int i40e_put_lump(struct i40e_lump_tracking *pile, u16 index, u16 id) |
| { |
| int valid_id = (id | I40E_PILE_VALID_BIT); |
| int count = 0; |
| int i; |
| |
| if (!pile || index >= pile->num_entries) |
| return -EINVAL; |
| |
| for (i = index; |
| i < pile->num_entries && pile->list[i] == valid_id; |
| i++) { |
| pile->list[i] = 0; |
| count++; |
| } |
| |
| if (count && index < pile->search_hint) |
| pile->search_hint = index; |
| |
| return count; |
| } |
| |
| /** |
| * i40e_find_vsi_from_id - searches for the vsi with the given id |
| * @pf: the pf structure to search for the vsi |
| * @id: id of the vsi it is searching for |
| **/ |
| struct i40e_vsi *i40e_find_vsi_from_id(struct i40e_pf *pf, u16 id) |
| { |
| int i; |
| |
| for (i = 0; i < pf->num_alloc_vsi; i++) |
| if (pf->vsi[i] && (pf->vsi[i]->id == id)) |
| return pf->vsi[i]; |
| |
| return NULL; |
| } |
| |
| /** |
| * i40e_service_event_schedule - Schedule the service task to wake up |
| * @pf: board private structure |
| * |
| * If not already scheduled, this puts the task into the work queue |
| **/ |
| void i40e_service_event_schedule(struct i40e_pf *pf) |
| { |
| if ((!test_bit(__I40E_DOWN, pf->state) && |
| !test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state)) || |
| test_bit(__I40E_RECOVERY_MODE, pf->state)) |
| queue_work(i40e_wq, &pf->service_task); |
| } |
| |
| /** |
| * i40e_tx_timeout - Respond to a Tx Hang |
| * @netdev: network interface device structure |
| * @txqueue: queue number timing out |
| * |
| * If any port has noticed a Tx timeout, it is likely that the whole |
| * device is munged, not just the one netdev port, so go for the full |
| * reset. |
| **/ |
| static void i40e_tx_timeout(struct net_device *netdev, unsigned int txqueue) |
| { |
| struct i40e_netdev_priv *np = netdev_priv(netdev); |
| struct i40e_vsi *vsi = np->vsi; |
| struct i40e_pf *pf = vsi->back; |
| struct i40e_ring *tx_ring = NULL; |
| unsigned int i; |
| u32 head, val; |
| |
| pf->tx_timeout_count++; |
| |
| /* with txqueue index, find the tx_ring struct */ |
| for (i = 0; i < vsi->num_queue_pairs; i++) { |
| if (vsi->tx_rings[i] && vsi->tx_rings[i]->desc) { |
| if (txqueue == |
| vsi->tx_rings[i]->queue_index) { |
| tx_ring = vsi->tx_rings[i]; |
| break; |
| } |
| } |
| } |
| |
| if (time_after(jiffies, (pf->tx_timeout_last_recovery + HZ*20))) |
| pf->tx_timeout_recovery_level = 1; /* reset after some time */ |
| else if (time_before(jiffies, |
| (pf->tx_timeout_last_recovery + netdev->watchdog_timeo))) |
| return; /* don't do any new action before the next timeout */ |
| |
| /* don't kick off another recovery if one is already pending */ |
| if (test_and_set_bit(__I40E_TIMEOUT_RECOVERY_PENDING, pf->state)) |
| return; |
| |
| if (tx_ring) { |
| head = i40e_get_head(tx_ring); |
| /* Read interrupt register */ |
| if (pf->flags & I40E_FLAG_MSIX_ENABLED) |
| val = rd32(&pf->hw, |
| I40E_PFINT_DYN_CTLN(tx_ring->q_vector->v_idx + |
| tx_ring->vsi->base_vector - 1)); |
| else |
| val = rd32(&pf->hw, I40E_PFINT_DYN_CTL0); |
| |
| netdev_info(netdev, "tx_timeout: VSI_seid: %d, Q %d, NTC: 0x%x, HWB: 0x%x, NTU: 0x%x, TAIL: 0x%x, INT: 0x%x\n", |
| vsi->seid, txqueue, tx_ring->next_to_clean, |
| head, tx_ring->next_to_use, |
| readl(tx_ring->tail), val); |
| } |
| |
| pf->tx_timeout_last_recovery = jiffies; |
| netdev_info(netdev, "tx_timeout recovery level %d, txqueue %d\n", |
| pf->tx_timeout_recovery_level, txqueue); |
| |
| switch (pf->tx_timeout_recovery_level) { |
| case 1: |
| set_bit(__I40E_PF_RESET_REQUESTED, pf->state); |
| break; |
| case 2: |
| set_bit(__I40E_CORE_RESET_REQUESTED, pf->state); |
| break; |
| case 3: |
| set_bit(__I40E_GLOBAL_RESET_REQUESTED, pf->state); |
| break; |
| default: |
| netdev_err(netdev, "tx_timeout recovery unsuccessful\n"); |
| break; |
| } |
| |
| i40e_service_event_schedule(pf); |
| pf->tx_timeout_recovery_level++; |
| } |
| |
| /** |
| * i40e_get_vsi_stats_struct - Get System Network Statistics |
| * @vsi: the VSI we care about |
| * |
| * Returns the address of the device statistics structure. |
| * The statistics are actually updated from the service task. |
| **/ |
| struct rtnl_link_stats64 *i40e_get_vsi_stats_struct(struct i40e_vsi *vsi) |
| { |
| return &vsi->net_stats; |
| } |
| |
| /** |
| * i40e_get_netdev_stats_struct_tx - populate stats from a Tx ring |
| * @ring: Tx ring to get statistics from |
| * @stats: statistics entry to be updated |
| **/ |
| static void i40e_get_netdev_stats_struct_tx(struct i40e_ring *ring, |
| struct rtnl_link_stats64 *stats) |
| { |
| u64 bytes, packets; |
| unsigned int start; |
| |
| do { |
| start = u64_stats_fetch_begin_irq(&ring->syncp); |
| packets = ring->stats.packets; |
| bytes = ring->stats.bytes; |
| } while (u64_stats_fetch_retry_irq(&ring->syncp, start)); |
| |
| stats->tx_packets += packets; |
| stats->tx_bytes += bytes; |
| } |
| |
| /** |
| * i40e_get_netdev_stats_struct - Get statistics for netdev interface |
| * @netdev: network interface device structure |
| * @stats: data structure to store statistics |
| * |
| * Returns the address of the device statistics structure. |
| * The statistics are actually updated from the service task. |
| **/ |
| static void i40e_get_netdev_stats_struct(struct net_device *netdev, |
| struct rtnl_link_stats64 *stats) |
| { |
| struct i40e_netdev_priv *np = netdev_priv(netdev); |
| struct i40e_vsi *vsi = np->vsi; |
| struct rtnl_link_stats64 *vsi_stats = i40e_get_vsi_stats_struct(vsi); |
| struct i40e_ring *ring; |
| int i; |
| |
| if (test_bit(__I40E_VSI_DOWN, vsi->state)) |
| return; |
| |
| if (!vsi->tx_rings) |
| return; |
| |
| rcu_read_lock(); |
| for (i = 0; i < vsi->num_queue_pairs; i++) { |
| u64 bytes, packets; |
| unsigned int start; |
| |
| ring = READ_ONCE(vsi->tx_rings[i]); |
| if (!ring) |
| continue; |
| i40e_get_netdev_stats_struct_tx(ring, stats); |
| |
| if (i40e_enabled_xdp_vsi(vsi)) { |
| ring = READ_ONCE(vsi->xdp_rings[i]); |
| if (!ring) |
| continue; |
| i40e_get_netdev_stats_struct_tx(ring, stats); |
| } |
| |
| ring = READ_ONCE(vsi->rx_rings[i]); |
| if (!ring) |
| continue; |
| do { |
| start = u64_stats_fetch_begin_irq(&ring->syncp); |
| packets = ring->stats.packets; |
| bytes = ring->stats.bytes; |
| } while (u64_stats_fetch_retry_irq(&ring->syncp, start)); |
| |
| stats->rx_packets += packets; |
| stats->rx_bytes += bytes; |
| |
| } |
| rcu_read_unlock(); |
| |
| /* following stats updated by i40e_watchdog_subtask() */ |
| stats->multicast = vsi_stats->multicast; |
| stats->tx_errors = vsi_stats->tx_errors; |
| stats->tx_dropped = vsi_stats->tx_dropped; |
| stats->rx_errors = vsi_stats->rx_errors; |
| stats->rx_dropped = vsi_stats->rx_dropped; |
| stats->rx_crc_errors = vsi_stats->rx_crc_errors; |
| stats->rx_length_errors = vsi_stats->rx_length_errors; |
| } |
| |
| /** |
| * i40e_vsi_reset_stats - Resets all stats of the given vsi |
| * @vsi: the VSI to have its stats reset |
| **/ |
| void i40e_vsi_reset_stats(struct i40e_vsi *vsi) |
| { |
| struct rtnl_link_stats64 *ns; |
| int i; |
| |
| if (!vsi) |
| return; |
| |
| ns = i40e_get_vsi_stats_struct(vsi); |
| memset(ns, 0, sizeof(*ns)); |
| memset(&vsi->net_stats_offsets, 0, sizeof(vsi->net_stats_offsets)); |
| memset(&vsi->eth_stats, 0, sizeof(vsi->eth_stats)); |
| memset(&vsi->eth_stats_offsets, 0, sizeof(vsi->eth_stats_offsets)); |
| if (vsi->rx_rings && vsi->rx_rings[0]) { |
| for (i = 0; i < vsi->num_queue_pairs; i++) { |
| memset(&vsi->rx_rings[i]->stats, 0, |
| sizeof(vsi->rx_rings[i]->stats)); |
| memset(&vsi->rx_rings[i]->rx_stats, 0, |
| sizeof(vsi->rx_rings[i]->rx_stats)); |
| memset(&vsi->tx_rings[i]->stats, 0, |
| sizeof(vsi->tx_rings[i]->stats)); |
| memset(&vsi->tx_rings[i]->tx_stats, 0, |
| sizeof(vsi->tx_rings[i]->tx_stats)); |
| } |
| } |
| vsi->stat_offsets_loaded = false; |
| } |
| |
| /** |
| * i40e_pf_reset_stats - Reset all of the stats for the given PF |
| * @pf: the PF to be reset |
| **/ |
| void i40e_pf_reset_stats(struct i40e_pf *pf) |
| { |
| int i; |
| |
| memset(&pf->stats, 0, sizeof(pf->stats)); |
| memset(&pf->stats_offsets, 0, sizeof(pf->stats_offsets)); |
| pf->stat_offsets_loaded = false; |
| |
| for (i = 0; i < I40E_MAX_VEB; i++) { |
| if (pf->veb[i]) { |
| memset(&pf->veb[i]->stats, 0, |
| sizeof(pf->veb[i]->stats)); |
| memset(&pf->veb[i]->stats_offsets, 0, |
| sizeof(pf->veb[i]->stats_offsets)); |
| memset(&pf->veb[i]->tc_stats, 0, |
| sizeof(pf->veb[i]->tc_stats)); |
| memset(&pf->veb[i]->tc_stats_offsets, 0, |
| sizeof(pf->veb[i]->tc_stats_offsets)); |
| pf->veb[i]->stat_offsets_loaded = false; |
| } |
| } |
| pf->hw_csum_rx_error = 0; |
| } |
| |
| /** |
| * i40e_stat_update48 - read and update a 48 bit stat from the chip |
| * @hw: ptr to the hardware info |
| * @hireg: the high 32 bit reg to read |
| * @loreg: the low 32 bit reg to read |
| * @offset_loaded: has the initial offset been loaded yet |
| * @offset: ptr to current offset value |
| * @stat: ptr to the stat |
| * |
| * Since the device stats are not reset at PFReset, they likely will not |
| * be zeroed when the driver starts. We'll save the first values read |
| * and use them as offsets to be subtracted from the raw values in order |
| * to report stats that count from zero. In the process, we also manage |
| * the potential roll-over. |
| **/ |
| static void i40e_stat_update48(struct i40e_hw *hw, u32 hireg, u32 loreg, |
| bool offset_loaded, u64 *offset, u64 *stat) |
| { |
| u64 new_data; |
| |
| if (hw->device_id == I40E_DEV_ID_QEMU) { |
| new_data = rd32(hw, loreg); |
| new_data |= ((u64)(rd32(hw, hireg) & 0xFFFF)) << 32; |
| } else { |
| new_data = rd64(hw, loreg); |
| } |
| if (!offset_loaded) |
| *offset = new_data; |
| if (likely(new_data >= *offset)) |
| *stat = new_data - *offset; |
| else |
| *stat = (new_data + BIT_ULL(48)) - *offset; |
| *stat &= 0xFFFFFFFFFFFFULL; |
| } |
| |
| /** |
| * i40e_stat_update32 - read and update a 32 bit stat from the chip |
| * @hw: ptr to the hardware info |
| * @reg: the hw reg to read |
| * @offset_loaded: has the initial offset been loaded yet |
| * @offset: ptr to current offset value |
| * @stat: ptr to the stat |
| **/ |
| static void i40e_stat_update32(struct i40e_hw *hw, u32 reg, |
| bool offset_loaded, u64 *offset, u64 *stat) |
| { |
| u32 new_data; |
| |
| new_data = rd32(hw, reg); |
| if (!offset_loaded) |
| *offset = new_data; |
| if (likely(new_data >= *offset)) |
| *stat = (u32)(new_data - *offset); |
| else |
| *stat = (u32)((new_data + BIT_ULL(32)) - *offset); |
| } |
| |
| /** |
| * i40e_stat_update_and_clear32 - read and clear hw reg, update a 32 bit stat |
| * @hw: ptr to the hardware info |
| * @reg: the hw reg to read and clear |
| * @stat: ptr to the stat |
| **/ |
| static void i40e_stat_update_and_clear32(struct i40e_hw *hw, u32 reg, u64 *stat) |
| { |
| u32 new_data = rd32(hw, reg); |
| |
| wr32(hw, reg, 1); /* must write a nonzero value to clear register */ |
| *stat += new_data; |
| } |
| |
| /** |
| * i40e_update_eth_stats - Update VSI-specific ethernet statistics counters. |
| * @vsi: the VSI to be updated |
| **/ |
| void i40e_update_eth_stats(struct i40e_vsi *vsi) |
| { |
| int stat_idx = le16_to_cpu(vsi->info.stat_counter_idx); |
| struct i40e_pf *pf = vsi->back; |
| struct i40e_hw *hw = &pf->hw; |
| struct i40e_eth_stats *oes; |
| struct i40e_eth_stats *es; /* device's eth stats */ |
| |
| es = &vsi->eth_stats; |
| oes = &vsi->eth_stats_offsets; |
| |
| /* Gather up the stats that the hw collects */ |
| i40e_stat_update32(hw, I40E_GLV_TEPC(stat_idx), |
| vsi->stat_offsets_loaded, |
| &oes->tx_errors, &es->tx_errors); |
| i40e_stat_update32(hw, I40E_GLV_RDPC(stat_idx), |
| vsi->stat_offsets_loaded, |
| &oes->rx_discards, &es->rx_discards); |
| i40e_stat_update32(hw, I40E_GLV_RUPP(stat_idx), |
| vsi->stat_offsets_loaded, |
| &oes->rx_unknown_protocol, &es->rx_unknown_protocol); |
| |
| i40e_stat_update48(hw, I40E_GLV_GORCH(stat_idx), |
| I40E_GLV_GORCL(stat_idx), |
| vsi->stat_offsets_loaded, |
| &oes->rx_bytes, &es->rx_bytes); |
| i40e_stat_update48(hw, I40E_GLV_UPRCH(stat_idx), |
| I40E_GLV_UPRCL(stat_idx), |
| vsi->stat_offsets_loaded, |
| &oes->rx_unicast, &es->rx_unicast); |
| i40e_stat_update48(hw, I40E_GLV_MPRCH(stat_idx), |
| I40E_GLV_MPRCL(stat_idx), |
| vsi->stat_offsets_loaded, |
| &oes->rx_multicast, &es->rx_multicast); |
| i40e_stat_update48(hw, I40E_GLV_BPRCH(stat_idx), |
| I40E_GLV_BPRCL(stat_idx), |
| vsi->stat_offsets_loaded, |
| &oes->rx_broadcast, &es->rx_broadcast); |
| |
| i40e_stat_update48(hw, I40E_GLV_GOTCH(stat_idx), |
| I40E_GLV_GOTCL(stat_idx), |
| vsi->stat_offsets_loaded, |
| &oes->tx_bytes, &es->tx_bytes); |
| i40e_stat_update48(hw, I40E_GLV_UPTCH(stat_idx), |
| I40E_GLV_UPTCL(stat_idx), |
| vsi->stat_offsets_loaded, |
| &oes->tx_unicast, &es->tx_unicast); |
| i40e_stat_update48(hw, I40E_GLV_MPTCH(stat_idx), |
| I40E_GLV_MPTCL(stat_idx), |
| vsi->stat_offsets_loaded, |
| &oes->tx_multicast, &es->tx_multicast); |
| i40e_stat_update48(hw, I40E_GLV_BPTCH(stat_idx), |
| I40E_GLV_BPTCL(stat_idx), |
| vsi->stat_offsets_loaded, |
| &oes->tx_broadcast, &es->tx_broadcast); |
| vsi->stat_offsets_loaded = true; |
| } |
| |
| /** |
| * i40e_update_veb_stats - Update Switch component statistics |
| * @veb: the VEB being updated |
| **/ |
| void i40e_update_veb_stats(struct i40e_veb *veb) |
| { |
| struct i40e_pf *pf = veb->pf; |
| struct i40e_hw *hw = &pf->hw; |
| struct i40e_eth_stats *oes; |
| struct i40e_eth_stats *es; /* device's eth stats */ |
| struct i40e_veb_tc_stats *veb_oes; |
| struct i40e_veb_tc_stats *veb_es; |
| int i, idx = 0; |
| |
| idx = veb->stats_idx; |
| es = &veb->stats; |
| oes = &veb->stats_offsets; |
| veb_es = &veb->tc_stats; |
| veb_oes = &veb->tc_stats_offsets; |
| |
| /* Gather up the stats that the hw collects */ |
| i40e_stat_update32(hw, I40E_GLSW_TDPC(idx), |
| veb->stat_offsets_loaded, |
| &oes->tx_discards, &es->tx_discards); |
| if (hw->revision_id > 0) |
| i40e_stat_update32(hw, I40E_GLSW_RUPP(idx), |
| veb->stat_offsets_loaded, |
| &oes->rx_unknown_protocol, |
| &es->rx_unknown_protocol); |
| i40e_stat_update48(hw, I40E_GLSW_GORCH(idx), I40E_GLSW_GORCL(idx), |
| veb->stat_offsets_loaded, |
| &oes->rx_bytes, &es->rx_bytes); |
| i40e_stat_update48(hw, I40E_GLSW_UPRCH(idx), I40E_GLSW_UPRCL(idx), |
| veb->stat_offsets_loaded, |
| &oes->rx_unicast, &es->rx_unicast); |
| i40e_stat_update48(hw, I40E_GLSW_MPRCH(idx), I40E_GLSW_MPRCL(idx), |
| veb->stat_offsets_loaded, |
| &oes->rx_multicast, &es->rx_multicast); |
| i40e_stat_update48(hw, I40E_GLSW_BPRCH(idx), I40E_GLSW_BPRCL(idx), |
| veb->stat_offsets_loaded, |
| &oes->rx_broadcast, &es->rx_broadcast); |
| |
| i40e_stat_update48(hw, I40E_GLSW_GOTCH(idx), I40E_GLSW_GOTCL(idx), |
| veb->stat_offsets_loaded, |
| &oes->tx_bytes, &es->tx_bytes); |
| i40e_stat_update48(hw, I40E_GLSW_UPTCH(idx), I40E_GLSW_UPTCL(idx), |
| veb->stat_offsets_loaded, |
| &oes->tx_unicast, &es->tx_unicast); |
| i40e_stat_update48(hw, I40E_GLSW_MPTCH(idx), I40E_GLSW_MPTCL(idx), |
| veb->stat_offsets_loaded, |
| &oes->tx_multicast, &es->tx_multicast); |
| i40e_stat_update48(hw, I40E_GLSW_BPTCH(idx), I40E_GLSW_BPTCL(idx), |
| veb->stat_offsets_loaded, |
| &oes->tx_broadcast, &es->tx_broadcast); |
| for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) { |
| i40e_stat_update48(hw, I40E_GLVEBTC_RPCH(i, idx), |
| I40E_GLVEBTC_RPCL(i, idx), |
| veb->stat_offsets_loaded, |
| &veb_oes->tc_rx_packets[i], |
| &veb_es->tc_rx_packets[i]); |
| i40e_stat_update48(hw, I40E_GLVEBTC_RBCH(i, idx), |
| I40E_GLVEBTC_RBCL(i, idx), |
| veb->stat_offsets_loaded, |
| &veb_oes->tc_rx_bytes[i], |
| &veb_es->tc_rx_bytes[i]); |
| i40e_stat_update48(hw, I40E_GLVEBTC_TPCH(i, idx), |
| I40E_GLVEBTC_TPCL(i, idx), |
| veb->stat_offsets_loaded, |
| &veb_oes->tc_tx_packets[i], |
| &veb_es->tc_tx_packets[i]); |
| i40e_stat_update48(hw, I40E_GLVEBTC_TBCH(i, idx), |
| I40E_GLVEBTC_TBCL(i, idx), |
| veb->stat_offsets_loaded, |
| &veb_oes->tc_tx_bytes[i], |
| &veb_es->tc_tx_bytes[i]); |
| } |
| veb->stat_offsets_loaded = true; |
| } |
| |
| /** |
| * i40e_update_vsi_stats - Update the vsi statistics counters. |
| * @vsi: the VSI to be updated |
| * |
| * There are a few instances where we store the same stat in a |
| * couple of different structs. This is partly because we have |
| * the netdev stats that need to be filled out, which is slightly |
| * different from the "eth_stats" defined by the chip and used in |
| * VF communications. We sort it out here. |
| **/ |
| static void i40e_update_vsi_stats(struct i40e_vsi *vsi) |
| { |
| struct i40e_pf *pf = vsi->back; |
| struct rtnl_link_stats64 *ons; |
| struct rtnl_link_stats64 *ns; /* netdev stats */ |
| struct i40e_eth_stats *oes; |
| struct i40e_eth_stats *es; /* device's eth stats */ |
| u32 tx_restart, tx_busy; |
| struct i40e_ring *p; |
| u32 rx_page, rx_buf; |
| u64 bytes, packets; |
| unsigned int start; |
| u64 tx_linearize; |
| u64 tx_force_wb; |
| u64 rx_p, rx_b; |
| u64 tx_p, tx_b; |
| u16 q; |
| |
| if (test_bit(__I40E_VSI_DOWN, vsi->state) || |
| test_bit(__I40E_CONFIG_BUSY, pf->state)) |
| return; |
| |
| ns = i40e_get_vsi_stats_struct(vsi); |
| ons = &vsi->net_stats_offsets; |
| es = &vsi->eth_stats; |
| oes = &vsi->eth_stats_offsets; |
| |
| /* Gather up the netdev and vsi stats that the driver collects |
| * on the fly during packet processing |
| */ |
| rx_b = rx_p = 0; |
| tx_b = tx_p = 0; |
| tx_restart = tx_busy = tx_linearize = tx_force_wb = 0; |
| rx_page = 0; |
| rx_buf = 0; |
| rcu_read_lock(); |
| for (q = 0; q < vsi->num_queue_pairs; q++) { |
| /* locate Tx ring */ |
| p = READ_ONCE(vsi->tx_rings[q]); |
| if (!p) |
| continue; |
| |
| do { |
| start = u64_stats_fetch_begin_irq(&p->syncp); |
| packets = p->stats.packets; |
| bytes = p->stats.bytes; |
| } while (u64_stats_fetch_retry_irq(&p->syncp, start)); |
| tx_b += bytes; |
| tx_p += packets; |
| tx_restart += p->tx_stats.restart_queue; |
| tx_busy += p->tx_stats.tx_busy; |
| tx_linearize += p->tx_stats.tx_linearize; |
| tx_force_wb += p->tx_stats.tx_force_wb; |
| |
| /* locate Rx ring */ |
| p = READ_ONCE(vsi->rx_rings[q]); |
| if (!p) |
| continue; |
| |
| do { |
| start = u64_stats_fetch_begin_irq(&p->syncp); |
| packets = p->stats.packets; |
| bytes = p->stats.bytes; |
| } while (u64_stats_fetch_retry_irq(&p->syncp, start)); |
| rx_b += bytes; |
| rx_p += packets; |
| rx_buf += p->rx_stats.alloc_buff_failed; |
| rx_page += p->rx_stats.alloc_page_failed; |
| |
| if (i40e_enabled_xdp_vsi(vsi)) { |
| /* locate XDP ring */ |
| p = READ_ONCE(vsi->xdp_rings[q]); |
| if (!p) |
| continue; |
| |
| do { |
| start = u64_stats_fetch_begin_irq(&p->syncp); |
| packets = p->stats.packets; |
| bytes = p->stats.bytes; |
| } while (u64_stats_fetch_retry_irq(&p->syncp, start)); |
| tx_b += bytes; |
| tx_p += packets; |
| tx_restart += p->tx_stats.restart_queue; |
| tx_busy += p->tx_stats.tx_busy; |
| tx_linearize += p->tx_stats.tx_linearize; |
| tx_force_wb += p->tx_stats.tx_force_wb; |
| } |
| } |
| rcu_read_unlock(); |
| vsi->tx_restart = tx_restart; |
| vsi->tx_busy = tx_busy; |
| vsi->tx_linearize = tx_linearize; |
| vsi->tx_force_wb = tx_force_wb; |
| vsi->rx_page_failed = rx_page; |
| vsi->rx_buf_failed = rx_buf; |
| |
| ns->rx_packets = rx_p; |
| ns->rx_bytes = rx_b; |
| ns->tx_packets = tx_p; |
| ns->tx_bytes = tx_b; |
| |
| /* update netdev stats from eth stats */ |
| i40e_update_eth_stats(vsi); |
| ons->tx_errors = oes->tx_errors; |
| ns->tx_errors = es->tx_errors; |
| ons->multicast = oes->rx_multicast; |
| ns->multicast = es->rx_multicast; |
| ons->rx_dropped = oes->rx_discards; |
| ns->rx_dropped = es->rx_discards; |
| ons->tx_dropped = oes->tx_discards; |
| ns->tx_dropped = es->tx_discards; |
| |
| /* pull in a couple PF stats if this is the main vsi */ |
| if (vsi == pf->vsi[pf->lan_vsi]) { |
| ns->rx_crc_errors = pf->stats.crc_errors; |
| ns->rx_errors = pf->stats.crc_errors + pf->stats.illegal_bytes; |
| ns->rx_length_errors = pf->stats.rx_length_errors; |
| } |
| } |
| |
| /** |
| * i40e_update_pf_stats - Update the PF statistics counters. |
| * @pf: the PF to be updated |
| **/ |
| static void i40e_update_pf_stats(struct i40e_pf *pf) |
| { |
| struct i40e_hw_port_stats *osd = &pf->stats_offsets; |
| struct i40e_hw_port_stats *nsd = &pf->stats; |
| struct i40e_hw *hw = &pf->hw; |
| u32 val; |
| int i; |
| |
| i40e_stat_update48(hw, I40E_GLPRT_GORCH(hw->port), |
| I40E_GLPRT_GORCL(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->eth.rx_bytes, &nsd->eth.rx_bytes); |
| i40e_stat_update48(hw, I40E_GLPRT_GOTCH(hw->port), |
| I40E_GLPRT_GOTCL(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->eth.tx_bytes, &nsd->eth.tx_bytes); |
| i40e_stat_update32(hw, I40E_GLPRT_RDPC(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->eth.rx_discards, |
| &nsd->eth.rx_discards); |
| i40e_stat_update48(hw, I40E_GLPRT_UPRCH(hw->port), |
| I40E_GLPRT_UPRCL(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->eth.rx_unicast, |
| &nsd->eth.rx_unicast); |
| i40e_stat_update48(hw, I40E_GLPRT_MPRCH(hw->port), |
| I40E_GLPRT_MPRCL(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->eth.rx_multicast, |
| &nsd->eth.rx_multicast); |
| i40e_stat_update48(hw, I40E_GLPRT_BPRCH(hw->port), |
| I40E_GLPRT_BPRCL(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->eth.rx_broadcast, |
| &nsd->eth.rx_broadcast); |
| i40e_stat_update48(hw, I40E_GLPRT_UPTCH(hw->port), |
| I40E_GLPRT_UPTCL(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->eth.tx_unicast, |
| &nsd->eth.tx_unicast); |
| i40e_stat_update48(hw, I40E_GLPRT_MPTCH(hw->port), |
| I40E_GLPRT_MPTCL(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->eth.tx_multicast, |
| &nsd->eth.tx_multicast); |
| i40e_stat_update48(hw, I40E_GLPRT_BPTCH(hw->port), |
| I40E_GLPRT_BPTCL(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->eth.tx_broadcast, |
| &nsd->eth.tx_broadcast); |
| |
| i40e_stat_update32(hw, I40E_GLPRT_TDOLD(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->tx_dropped_link_down, |
| &nsd->tx_dropped_link_down); |
| |
| i40e_stat_update32(hw, I40E_GLPRT_CRCERRS(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->crc_errors, &nsd->crc_errors); |
| |
| i40e_stat_update32(hw, I40E_GLPRT_ILLERRC(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->illegal_bytes, &nsd->illegal_bytes); |
| |
| i40e_stat_update32(hw, I40E_GLPRT_MLFC(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->mac_local_faults, |
| &nsd->mac_local_faults); |
| i40e_stat_update32(hw, I40E_GLPRT_MRFC(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->mac_remote_faults, |
| &nsd->mac_remote_faults); |
| |
| i40e_stat_update32(hw, I40E_GLPRT_RLEC(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->rx_length_errors, |
| &nsd->rx_length_errors); |
| |
| i40e_stat_update32(hw, I40E_GLPRT_LXONRXC(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->link_xon_rx, &nsd->link_xon_rx); |
| i40e_stat_update32(hw, I40E_GLPRT_LXONTXC(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->link_xon_tx, &nsd->link_xon_tx); |
| i40e_stat_update32(hw, I40E_GLPRT_LXOFFRXC(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->link_xoff_rx, &nsd->link_xoff_rx); |
| i40e_stat_update32(hw, I40E_GLPRT_LXOFFTXC(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->link_xoff_tx, &nsd->link_xoff_tx); |
| |
| for (i = 0; i < 8; i++) { |
| i40e_stat_update32(hw, I40E_GLPRT_PXOFFRXC(hw->port, i), |
| pf->stat_offsets_loaded, |
| &osd->priority_xoff_rx[i], |
| &nsd->priority_xoff_rx[i]); |
| i40e_stat_update32(hw, I40E_GLPRT_PXONRXC(hw->port, i), |
| pf->stat_offsets_loaded, |
| &osd->priority_xon_rx[i], |
| &nsd->priority_xon_rx[i]); |
| i40e_stat_update32(hw, I40E_GLPRT_PXONTXC(hw->port, i), |
| pf->stat_offsets_loaded, |
| &osd->priority_xon_tx[i], |
| &nsd->priority_xon_tx[i]); |
| i40e_stat_update32(hw, I40E_GLPRT_PXOFFTXC(hw->port, i), |
| pf->stat_offsets_loaded, |
| &osd->priority_xoff_tx[i], |
| &nsd->priority_xoff_tx[i]); |
| i40e_stat_update32(hw, |
| I40E_GLPRT_RXON2OFFCNT(hw->port, i), |
| pf->stat_offsets_loaded, |
| &osd->priority_xon_2_xoff[i], |
| &nsd->priority_xon_2_xoff[i]); |
| } |
| |
| i40e_stat_update48(hw, I40E_GLPRT_PRC64H(hw->port), |
| I40E_GLPRT_PRC64L(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->rx_size_64, &nsd->rx_size_64); |
| i40e_stat_update48(hw, I40E_GLPRT_PRC127H(hw->port), |
| I40E_GLPRT_PRC127L(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->rx_size_127, &nsd->rx_size_127); |
| i40e_stat_update48(hw, I40E_GLPRT_PRC255H(hw->port), |
| I40E_GLPRT_PRC255L(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->rx_size_255, &nsd->rx_size_255); |
| i40e_stat_update48(hw, I40E_GLPRT_PRC511H(hw->port), |
| I40E_GLPRT_PRC511L(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->rx_size_511, &nsd->rx_size_511); |
| i40e_stat_update48(hw, I40E_GLPRT_PRC1023H(hw->port), |
| I40E_GLPRT_PRC1023L(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->rx_size_1023, &nsd->rx_size_1023); |
| i40e_stat_update48(hw, I40E_GLPRT_PRC1522H(hw->port), |
| I40E_GLPRT_PRC1522L(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->rx_size_1522, &nsd->rx_size_1522); |
| i40e_stat_update48(hw, I40E_GLPRT_PRC9522H(hw->port), |
| I40E_GLPRT_PRC9522L(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->rx_size_big, &nsd->rx_size_big); |
| |
| i40e_stat_update48(hw, I40E_GLPRT_PTC64H(hw->port), |
| I40E_GLPRT_PTC64L(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->tx_size_64, &nsd->tx_size_64); |
| i40e_stat_update48(hw, I40E_GLPRT_PTC127H(hw->port), |
| I40E_GLPRT_PTC127L(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->tx_size_127, &nsd->tx_size_127); |
| i40e_stat_update48(hw, I40E_GLPRT_PTC255H(hw->port), |
| I40E_GLPRT_PTC255L(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->tx_size_255, &nsd->tx_size_255); |
| i40e_stat_update48(hw, I40E_GLPRT_PTC511H(hw->port), |
| I40E_GLPRT_PTC511L(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->tx_size_511, &nsd->tx_size_511); |
| i40e_stat_update48(hw, I40E_GLPRT_PTC1023H(hw->port), |
| I40E_GLPRT_PTC1023L(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->tx_size_1023, &nsd->tx_size_1023); |
| i40e_stat_update48(hw, I40E_GLPRT_PTC1522H(hw->port), |
| I40E_GLPRT_PTC1522L(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->tx_size_1522, &nsd->tx_size_1522); |
| i40e_stat_update48(hw, I40E_GLPRT_PTC9522H(hw->port), |
| I40E_GLPRT_PTC9522L(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->tx_size_big, &nsd->tx_size_big); |
| |
| i40e_stat_update32(hw, I40E_GLPRT_RUC(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->rx_undersize, &nsd->rx_undersize); |
| i40e_stat_update32(hw, I40E_GLPRT_RFC(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->rx_fragments, &nsd->rx_fragments); |
| i40e_stat_update32(hw, I40E_GLPRT_ROC(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->rx_oversize, &nsd->rx_oversize); |
| i40e_stat_update32(hw, I40E_GLPRT_RJC(hw->port), |
| pf->stat_offsets_loaded, |
| &osd->rx_jabber, &nsd->rx_jabber); |
| |
| /* FDIR stats */ |
| i40e_stat_update_and_clear32(hw, |
| I40E_GLQF_PCNT(I40E_FD_ATR_STAT_IDX(hw->pf_id)), |
| &nsd->fd_atr_match); |
| i40e_stat_update_and_clear32(hw, |
| I40E_GLQF_PCNT(I40E_FD_SB_STAT_IDX(hw->pf_id)), |
| &nsd->fd_sb_match); |
| i40e_stat_update_and_clear32(hw, |
| I40E_GLQF_PCNT(I40E_FD_ATR_TUNNEL_STAT_IDX(hw->pf_id)), |
| &nsd->fd_atr_tunnel_match); |
| |
| val = rd32(hw, I40E_PRTPM_EEE_STAT); |
| nsd->tx_lpi_status = |
| (val & I40E_PRTPM_EEE_STAT_TX_LPI_STATUS_MASK) >> |
| I40E_PRTPM_EEE_STAT_TX_LPI_STATUS_SHIFT; |
| nsd->rx_lpi_status = |
| (val & I40E_PRTPM_EEE_STAT_RX_LPI_STATUS_MASK) >> |
| I40E_PRTPM_EEE_STAT_RX_LPI_STATUS_SHIFT; |
| i40e_stat_update32(hw, I40E_PRTPM_TLPIC, |
| pf->stat_offsets_loaded, |
| &osd->tx_lpi_count, &nsd->tx_lpi_count); |
| i40e_stat_update32(hw, I40E_PRTPM_RLPIC, |
| pf->stat_offsets_loaded, |
| &osd->rx_lpi_count, &nsd->rx_lpi_count); |
| |
| if (pf->flags & I40E_FLAG_FD_SB_ENABLED && |
| !test_bit(__I40E_FD_SB_AUTO_DISABLED, pf->state)) |
| nsd->fd_sb_status = true; |
| else |
| nsd->fd_sb_status = false; |
| |
| if (pf->flags & I40E_FLAG_FD_ATR_ENABLED && |
| !test_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state)) |
| nsd->fd_atr_status = true; |
| else |
| nsd->fd_atr_status = false; |
| |
| pf->stat_offsets_loaded = true; |
| } |
| |
| /** |
| * i40e_update_stats - Update the various statistics counters. |
| * @vsi: the VSI to be updated |
| * |
| * Update the various stats for this VSI and its related entities. |
| **/ |
| void i40e_update_stats(struct i40e_vsi *vsi) |
| { |
| struct i40e_pf *pf = vsi->back; |
| |
| if (vsi == pf->vsi[pf->lan_vsi]) |
| i40e_update_pf_stats(pf); |
| |
| i40e_update_vsi_stats(vsi); |
| } |
| |
| /** |
| * i40e_count_filters - counts VSI mac filters |
| * @vsi: the VSI to be searched |
| * |
| * Returns count of mac filters |
| **/ |
| int i40e_count_filters(struct i40e_vsi *vsi) |
| { |
| struct i40e_mac_filter *f; |
| struct hlist_node *h; |
| int bkt; |
| int cnt = 0; |
| |
| hash_for_each_safe(vsi->mac_filter_hash, bkt, h, f, hlist) |
| ++cnt; |
| |
| return cnt; |
| } |
| |
| /** |
| * i40e_find_filter - Search VSI filter list for specific mac/vlan filter |
| * @vsi: the VSI to be searched |
| * @macaddr: the MAC address |
| * @vlan: the vlan |
| * |
| * Returns ptr to the filter object or NULL |
| **/ |
| static struct i40e_mac_filter *i40e_find_filter(struct i40e_vsi *vsi, |
| const u8 *macaddr, s16 vlan) |
| { |
| struct i40e_mac_filter *f; |
| u64 key; |
| |
| if (!vsi || !macaddr) |
| return NULL; |
| |
| key = i40e_addr_to_hkey(macaddr); |
| hash_for_each_possible(vsi->mac_filter_hash, f, hlist, key) { |
| if ((ether_addr_equal(macaddr, f->macaddr)) && |
| (vlan == f->vlan)) |
| return f; |
| } |
| return NULL; |
| } |
| |
| /** |
| * i40e_find_mac - Find a mac addr in the macvlan filters list |
| * @vsi: the VSI to be searched |
| * @macaddr: the MAC address we are searching for |
| * |
| * Returns the first filter with the provided MAC address or NULL if |
| * MAC address was not found |
| **/ |
| struct i40e_mac_filter *i40e_find_mac(struct i40e_vsi *vsi, const u8 *macaddr) |
| { |
| struct i40e_mac_filter *f; |
| u64 key; |
| |
| if (!vsi || !macaddr) |
| return NULL; |
| |
| key = i40e_addr_to_hkey(macaddr); |
| hash_for_each_possible(vsi->mac_filter_hash, f, hlist, key) { |
| if ((ether_addr_equal(macaddr, f->macaddr))) |
| return f; |
| } |
| return NULL; |
| } |
| |
| /** |
| * i40e_is_vsi_in_vlan - Check if VSI is in vlan mode |
| * @vsi: the VSI to be searched |
| * |
| * Returns true if VSI is in vlan mode or false otherwise |
| **/ |
| bool i40e_is_vsi_in_vlan(struct i40e_vsi *vsi) |
| { |
| /* If we have a PVID, always operate in VLAN mode */ |
| if (vsi->info.pvid) |
| return true; |
| |
| /* We need to operate in VLAN mode whenever we have any filters with |
| * a VLAN other than I40E_VLAN_ALL. We could check the table each |
| * time, incurring search cost repeatedly. However, we can notice two |
| * things: |
| * |
| * 1) the only place where we can gain a VLAN filter is in |
| * i40e_add_filter. |
| * |
| * 2) the only place where filters are actually removed is in |
| * i40e_sync_filters_subtask. |
| * |
| * Thus, we can simply use a boolean value, has_vlan_filters which we |
| * will set to true when we add a VLAN filter in i40e_add_filter. Then |
| * we have to perform the full search after deleting filters in |
| * i40e_sync_filters_subtask, but we already have to search |
| * filters here and can perform the check at the same time. This |
| * results in avoiding embedding a loop for VLAN mode inside another |
| * loop over all the filters, and should maintain correctness as noted |
| * above. |
| */ |
| return vsi->has_vlan_filter; |
| } |
| |
| /** |
| * i40e_correct_mac_vlan_filters - Correct non-VLAN filters if necessary |
| * @vsi: the VSI to configure |
| * @tmp_add_list: list of filters ready to be added |
| * @tmp_del_list: list of filters ready to be deleted |
| * @vlan_filters: the number of active VLAN filters |
| * |
| * Update VLAN=0 and VLAN=-1 (I40E_VLAN_ANY) filters properly so that they |
| * behave as expected. If we have any active VLAN filters remaining or about |
| * to be added then we need to update non-VLAN filters to be marked as VLAN=0 |
| * so that they only match against untagged traffic. If we no longer have any |
| * active VLAN filters, we need to make all non-VLAN filters marked as VLAN=-1 |
| * so that they match against both tagged and untagged traffic. In this way, |
| * we ensure that we correctly receive the desired traffic. This ensures that |
| * when we have an active VLAN we will receive only untagged traffic and |
| * traffic matching active VLANs. If we have no active VLANs then we will |
| * operate in non-VLAN mode and receive all traffic, tagged or untagged. |
| * |
| * Finally, in a similar fashion, this function also corrects filters when |
| * there is an active PVID assigned to this VSI. |
| * |
| * In case of memory allocation failure return -ENOMEM. Otherwise, return 0. |
| * |
| * This function is only expected to be called from within |
| * i40e_sync_vsi_filters. |
| * |
| * NOTE: This function expects to be called while under the |
| * mac_filter_hash_lock |
| */ |
| static int i40e_correct_mac_vlan_filters(struct i40e_vsi *vsi, |
| struct hlist_head *tmp_add_list, |
| struct hlist_head *tmp_del_list, |
| int vlan_filters) |
| { |
| s16 pvid = le16_to_cpu(vsi->info.pvid); |
| struct i40e_mac_filter *f, *add_head; |
| struct i40e_new_mac_filter *new; |
| struct hlist_node *h; |
| int bkt, new_vlan; |
| |
| /* To determine if a particular filter needs to be replaced we |
| * have the three following conditions: |
| * |
| * a) if we have a PVID assigned, then all filters which are |
| * not marked as VLAN=PVID must be replaced with filters that |
| * are. |
| * b) otherwise, if we have any active VLANS, all filters |
| * which are marked as VLAN=-1 must be replaced with |
| * filters marked as VLAN=0 |
| * c) finally, if we do not have any active VLANS, all filters |
| * which are marked as VLAN=0 must be replaced with filters |
| * marked as VLAN=-1 |
| */ |
| |
| /* Update the filters about to be added in place */ |
| hlist_for_each_entry(new, tmp_add_list, hlist) { |
| if (pvid && new->f->vlan != pvid) |
| new->f->vlan = pvid; |
| else if (vlan_filters && new->f->vlan == I40E_VLAN_ANY) |
| new->f->vlan = 0; |
| else if (!vlan_filters && new->f->vlan == 0) |
| new->f->vlan = I40E_VLAN_ANY; |
| } |
| |
| /* Update the remaining active filters */ |
| hash_for_each_safe(vsi->mac_filter_hash, bkt, h, f, hlist) { |
| /* Combine the checks for whether a filter needs to be changed |
| * and then determine the new VLAN inside the if block, in |
| * order to avoid duplicating code for adding the new filter |
| * then deleting the old filter. |
| */ |
| if ((pvid && f->vlan != pvid) || |
| (vlan_filters && f->vlan == I40E_VLAN_ANY) || |
| (!vlan_filters && f->vlan == 0)) { |
| /* Determine the new vlan we will be adding */ |
| if (pvid) |
| new_vlan = pvid; |
| else if (vlan_filters) |
| new_vlan = 0; |
| else |
| new_vlan = I40E_VLAN_ANY; |
| |
| /* Create the new filter */ |
| add_head = i40e_add_filter(vsi, f->macaddr, new_vlan); |
| if (!add_head) |
| return -ENOMEM; |
| |
| /* Create a temporary i40e_new_mac_filter */ |
| new = kzalloc(sizeof(*new), GFP_ATOMIC); |
| if (!new) |
| return -ENOMEM; |
| |
| new->f = add_head; |
| new->state = add_head->state; |
| |
| /* Add the new filter to the tmp list */ |
| hlist_add_head(&new->hlist, tmp_add_list); |
| |
| /* Put the original filter into the delete list */ |
| f->state = I40E_FILTER_REMOVE; |
| hash_del(&f->hlist); |
| hlist_add_head(&f->hlist, tmp_del_list); |
| } |
| } |
| |
| vsi->has_vlan_filter = !!vlan_filters; |
| |
| return 0; |
| } |
| |
| /** |
| * i40e_rm_default_mac_filter - Remove the default MAC filter set by NVM |
| * @vsi: the PF Main VSI - inappropriate for any other VSI |
| * @macaddr: the MAC address |
| * |
| * Remove whatever filter the firmware set up so the driver can manage |
| * its own filtering intelligently. |
| **/ |
| static void i40e_rm_default_mac_filter(struct i40e_vsi *vsi, u8 *macaddr) |
| { |
| struct i40e_aqc_remove_macvlan_element_data element; |
| struct i40e_pf *pf = vsi->back; |
| |
| /* Only appropriate for the PF main VSI */ |
| if (vsi->type != I40E_VSI_MAIN) |
| return; |
| |
| memset(&element, 0, sizeof(element)); |
| ether_addr_copy(element.mac_addr, macaddr); |
| element.vlan_tag = 0; |
| /* Ignore error returns, some firmware does it this way... */ |
| element.flags = I40E_AQC_MACVLAN_DEL_PERFECT_MATCH; |
| i40e_aq_remove_macvlan(&pf->hw, vsi->seid, &element, 1, NULL); |
| |
| memset(&element, 0, sizeof(element)); |
| ether_addr_copy(element.mac_addr, macaddr); |
| element.vlan_tag = 0; |
| /* ...and some firmware does it this way. */ |
| element.flags = I40E_AQC_MACVLAN_DEL_PERFECT_MATCH | |
| I40E_AQC_MACVLAN_DEL_IGNORE_VLAN; |
| i40e_aq_remove_macvlan(&pf->hw, vsi->seid, &element, 1, NULL); |
| } |
| |
| /** |
| * i40e_add_filter - Add a mac/vlan filter to the VSI |
| * @vsi: the VSI to be searched |
| * @macaddr: the MAC address |
| * @vlan: the vlan |
| * |
| * Returns ptr to the filter object or NULL when no memory available. |
| * |
| * NOTE: This function is expected to be called with mac_filter_hash_lock |
| * being held. |
| **/ |
| struct i40e_mac_filter *i40e_add_filter(struct i40e_vsi *vsi, |
| const u8 *macaddr, s16 vlan) |
| { |
| struct i40e_mac_filter *f; |
| u64 key; |
| |
| if (!vsi || !macaddr) |
| return NULL; |
| |
| f = i40e_find_filter(vsi, macaddr, vlan); |
| if (!f) { |
| f = kzalloc(sizeof(*f), GFP_ATOMIC); |
| if (!f) |
| return NULL; |
| |
| /* Update the boolean indicating if we need to function in |
| * VLAN mode. |
| */ |
| if (vlan >= 0) |
| vsi->has_vlan_filter = true; |
| |
| ether_addr_copy(f->macaddr, macaddr); |
| f->vlan = vlan; |
| f->state = I40E_FILTER_NEW; |
| INIT_HLIST_NODE(&f->hlist); |
| |
| key = i40e_addr_to_hkey(macaddr); |
| hash_add(vsi->mac_filter_hash, &f->hlist, key); |
| |
| vsi->flags |= I40E_VSI_FLAG_FILTER_CHANGED; |
| set_bit(__I40E_MACVLAN_SYNC_PENDING, vsi->back->state); |
| } |
| |
| /* If we're asked to add a filter that has been marked for removal, it |
| * is safe to simply restore it to active state. __i40e_del_filter |
| * will have simply deleted any filters which were previously marked |
| * NEW or FAILED, so if it is currently marked REMOVE it must have |
| * previously been ACTIVE. Since we haven't yet run the sync filters |
| * task, just restore this filter to the ACTIVE state so that the |
| * sync task leaves it in place |
| */ |
| if (f->state == I40E_FILTER_REMOVE) |
| f->state = I40E_FILTER_ACTIVE; |
| |
| return f; |
| } |
| |
| /** |
| * __i40e_del_filter - Remove a specific filter from the VSI |
| * @vsi: VSI to remove from |
| * @f: the filter to remove from the list |
| * |
| * This function should be called instead of i40e_del_filter only if you know |
| * the exact filter you will remove already, such as via i40e_find_filter or |
| * i40e_find_mac. |
| * |
| * NOTE: This function is expected to be called with mac_filter_hash_lock |
| * being held. |
| * ANOTHER NOTE: This function MUST be called from within the context of |
| * the "safe" variants of any list iterators, e.g. list_for_each_entry_safe() |
| * instead of list_for_each_entry(). |
| **/ |
| void __i40e_del_filter(struct i40e_vsi *vsi, struct i40e_mac_filter *f) |
| { |
| if (!f) |
| return; |
| |
| /* If the filter was never added to firmware then we can just delete it |
| * directly and we don't want to set the status to remove or else an |
| * admin queue command will unnecessarily fire. |
| */ |
| if ((f->state == I40E_FILTER_FAILED) || |
| (f->state == I40E_FILTER_NEW)) { |
| hash_del(&f->hlist); |
| kfree(f); |
| } else { |
| f->state = I40E_FILTER_REMOVE; |
| } |
| |
| vsi->flags |= I40E_VSI_FLAG_FILTER_CHANGED; |
| set_bit(__I40E_MACVLAN_SYNC_PENDING, vsi->back->state); |
| } |
| |
| /** |
| * i40e_del_filter - Remove a MAC/VLAN filter from the VSI |
| * @vsi: the VSI to be searched |
| * @macaddr: the MAC address |
| * @vlan: the VLAN |
| * |
| * NOTE: This function is expected to be called with mac_filter_hash_lock |
| * being held. |
| * ANOTHER NOTE: This function MUST be called from within the context of |
| * the "safe" variants of any list iterators, e.g. list_for_each_entry_safe() |
| * instead of list_for_each_entry(). |
| **/ |
| void i40e_del_filter(struct i40e_vsi *vsi, const u8 *macaddr, s16 vlan) |
| { |
| struct i40e_mac_filter *f; |
| |
| if (!vsi || !macaddr) |
| return; |
| |
| f = i40e_find_filter(vsi, macaddr, vlan); |
| __i40e_del_filter(vsi, f); |
| } |
| |
| /** |
| * i40e_add_mac_filter - Add a MAC filter for all active VLANs |
| * @vsi: the VSI to be searched |
| * @macaddr: the mac address to be filtered |
| * |
| * If we're not in VLAN mode, just add the filter to I40E_VLAN_ANY. Otherwise, |
| * go through all the macvlan filters and add a macvlan filter for each |
| * unique vlan that already exists. If a PVID has been assigned, instead only |
| * add the macaddr to that VLAN. |
| * |
| * Returns last filter added on success, else NULL |
| **/ |
| struct i40e_mac_filter *i40e_add_mac_filter(struct i40e_vsi *vsi, |
| const u8 *macaddr) |
| { |
| struct i40e_mac_filter *f, *add = NULL; |
| struct hlist_node *h; |
| int bkt; |
| |
| if (vsi->info.pvid) |
| return i40e_add_filter(vsi, macaddr, |
| le16_to_cpu(vsi->info.pvid)); |
| |
| if (!i40e_is_vsi_in_vlan(vsi)) |
| return i40e_add_filter(vsi, macaddr, I40E_VLAN_ANY); |
| |
| hash_for_each_safe(vsi->mac_filter_hash, bkt, h, f, hlist) { |
| if (f->state == I40E_FILTER_REMOVE) |
| continue; |
| add = i40e_add_filter(vsi, macaddr, f->vlan); |
| if (!add) |
| return NULL; |
| } |
| |
| return add; |
| } |
| |
| /** |
| * i40e_del_mac_filter - Remove a MAC filter from all VLANs |
| * @vsi: the VSI to be searched |
| * @macaddr: the mac address to be removed |
| * |
| * Removes a given MAC address from a VSI regardless of what VLAN it has been |
| * associated with. |
| * |
| * Returns 0 for success, or error |
| **/ |
| int i40e_del_mac_filter(struct i40e_vsi *vsi, const u8 *macaddr) |
| { |
| struct i40e_mac_filter *f; |
| struct hlist_node *h; |
| bool found = false; |
| int bkt; |
| |
| lockdep_assert_held(&vsi->mac_filter_hash_lock); |
| hash_for_each_safe(vsi->mac_filter_hash, bkt, h, f, hlist) { |
| if (ether_addr_equal(macaddr, f->macaddr)) { |
| __i40e_del_filter(vsi, f); |
| found = true; |
| } |
| } |
| |
| if (found) |
| return 0; |
| else |
| return -ENOENT; |
| } |
| |
| /** |
| * i40e_set_mac - NDO callback to set mac address |
| * @netdev: network interface device structure |
| * @p: pointer to an address structure |
| * |
| * Returns 0 on success, negative on failure |
| **/ |
| static int i40e_set_mac(struct net_device *netdev, void *p) |
| { |
| struct i40e_netdev_priv *np = netdev_priv(netdev); |
| struct i40e_vsi *vsi = np->vsi; |
| struct i40e_pf *pf = vsi->back; |
| struct i40e_hw *hw = &pf->hw; |
| struct sockaddr *addr = p; |
| |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| if (ether_addr_equal(netdev->dev_addr, addr->sa_data)) { |
| netdev_info(netdev, "already using mac address %pM\n", |
| addr->sa_data); |
| return 0; |
| } |
| |
| if (test_bit(__I40E_DOWN, pf->state) || |
| test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state)) |
| return -EADDRNOTAVAIL; |
| |
| if (ether_addr_equal(hw->mac.addr, addr->sa_data)) |
| netdev_info(netdev, "returning to hw mac address %pM\n", |
| hw->mac.addr); |
| else |
| netdev_info(netdev, "set new mac address %pM\n", addr->sa_data); |
| |
| /* Copy the address first, so that we avoid a possible race with |
| * .set_rx_mode(). |
| * - Remove old address from MAC filter |
| * - Copy new address |
| * - Add new address to MAC filter |
| */ |
| spin_lock_bh(&vsi->mac_filter_hash_lock); |
| i40e_del_mac_filter(vsi, netdev->dev_addr); |
| eth_hw_addr_set(netdev, addr->sa_data); |
| i40e_add_mac_filter(vsi, netdev->dev_addr); |
| spin_unlock_bh(&vsi->mac_filter_hash_lock); |
| |
| if (vsi->type == I40E_VSI_MAIN) { |
| i40e_status ret; |
| |
| ret = i40e_aq_mac_address_write(hw, I40E_AQC_WRITE_TYPE_LAA_WOL, |
| addr->sa_data, NULL); |
| if (ret) |
| netdev_info(netdev, "Ignoring error from firmware on LAA update, status %s, AQ ret %s\n", |
| i40e_stat_str(hw, ret), |
| i40e_aq_str(hw, hw->aq.asq_last_status)); |
| } |
| |
| /* schedule our worker thread which will take care of |
| * applying the new filter changes |
| */ |
| i40e_service_event_schedule(pf); |
| return 0; |
| } |
| |
| /** |
| * i40e_config_rss_aq - Prepare for RSS using AQ commands |
| * @vsi: vsi structure |
| * @seed: RSS hash seed |
| * @lut: pointer to lookup table of lut_size |
| * @lut_size: size of the lookup table |
| **/ |
| static int i40e_config_rss_aq(struct i40e_vsi *vsi, const u8 *seed, |
| u8 *lut, u16 lut_size) |
| { |
| struct i40e_pf *pf = vsi->back; |
| struct i40e_hw *hw = &pf->hw; |
| int ret = 0; |
| |
| if (seed) { |
| struct i40e_aqc_get_set_rss_key_data *seed_dw = |
| (struct i40e_aqc_get_set_rss_key_data *)seed; |
| ret = i40e_aq_set_rss_key(hw, vsi->id, seed_dw); |
| if (ret) { |
| dev_info(&pf->pdev->dev, |
| "Cannot set RSS key, err %s aq_err %s\n", |
| i40e_stat_str(hw, ret), |
| i40e_aq_str(hw, hw->aq.asq_last_status)); |
| return ret; |
| } |
| } |
| if (lut) { |
| bool pf_lut = vsi->type == I40E_VSI_MAIN; |
| |
| ret = i40e_aq_set_rss_lut(hw, vsi->id, pf_lut, lut, lut_size); |
| if (ret) { |
| dev_info(&pf->pdev->dev, |
| "Cannot set RSS lut, err %s aq_err %s\n", |
| i40e_stat_str(hw, ret), |
| i40e_aq_str(hw, hw->aq.asq_last_status)); |
| return ret; |
| } |
| } |
| return ret; |
| } |
| |
| /** |
| * i40e_vsi_config_rss - Prepare for VSI(VMDq) RSS if used |
| * @vsi: VSI structure |
| **/ |
| static int i40e_vsi_config_rss(struct i40e_vsi *vsi) |
| { |
| struct i40e_pf *pf = vsi->back; |
| u8 seed[I40E_HKEY_ARRAY_SIZE]; |
| u8 *lut; |
| int ret; |
| |
| if (!(pf->hw_features & I40E_HW_RSS_AQ_CAPABLE)) |
| return 0; |
| if (!vsi->rss_size) |
| vsi->rss_size = min_t(int, pf->alloc_rss_size, |
| vsi->num_queue_pairs); |
| if (!vsi->rss_size) |
| return -EINVAL; |
| lut = kzalloc(vsi->rss_table_size, GFP_KERNEL); |
| if (!lut) |
| return -ENOMEM; |
| |
| /* Use the user configured hash keys and lookup table if there is one, |
| * otherwise use default |
| */ |
| if (vsi->rss_lut_user) |
| memcpy(lut, vsi->rss_lut_user, vsi->rss_table_size); |
| else |
| i40e_fill_rss_lut(pf, lut, vsi->rss_table_size, vsi->rss_size); |
| if (vsi->rss_hkey_user) |
| memcpy(seed, vsi->rss_hkey_user, I40E_HKEY_ARRAY_SIZE); |
| else |
| netdev_rss_key_fill((void *)seed, I40E_HKEY_ARRAY_SIZE); |
| ret = i40e_config_rss_aq(vsi, seed, lut, vsi->rss_table_size); |
| kfree(lut); |
| return ret; |
| } |
| |
| /** |
| * i40e_vsi_setup_queue_map_mqprio - Prepares mqprio based tc_config |
| * @vsi: the VSI being configured, |
| * @ctxt: VSI context structure |
| * @enabled_tc: number of traffic classes to enable |
| * |
| * Prepares VSI tc_config to have queue configurations based on MQPRIO options. |
| **/ |
| static int i40e_vsi_setup_queue_map_mqprio(struct i40e_vsi *vsi, |
| struct i40e_vsi_context *ctxt, |
| u8 enabled_tc) |
| { |
| u16 qcount = 0, max_qcount, qmap, sections = 0; |
| int i, override_q, pow, num_qps, ret; |
| u8 netdev_tc = 0, offset = 0; |
| |
| if (vsi->type != I40E_VSI_MAIN) |
| return -EINVAL; |
| sections = I40E_AQ_VSI_PROP_QUEUE_MAP_VALID; |
| sections |= I40E_AQ_VSI_PROP_SCHED_VALID; |
| vsi->tc_config.numtc = vsi->mqprio_qopt.qopt.num_tc; |
| vsi->tc_config.enabled_tc = enabled_tc ? enabled_tc : 1; |
| num_qps = vsi->mqprio_qopt.qopt.count[0]; |
| |
| /* find the next higher power-of-2 of num queue pairs */ |
| pow = ilog2(num_qps); |
| if (!is_power_of_2(num_qps)) |
| pow++; |
| qmap = (offset << I40E_AQ_VSI_TC_QUE_OFFSET_SHIFT) | |
| (pow << I40E_AQ_VSI_TC_QUE_NUMBER_SHIFT); |
| |
| /* Setup queue offset/count for all TCs for given VSI */ |
| max_qcount = vsi->mqprio_qopt.qopt.count[0]; |
| for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) { |
| /* See if the given TC is enabled for the given VSI */ |
| if (vsi->tc_config.enabled_tc & BIT(i)) { |
| offset = vsi->mqprio_qopt.qopt.offset[i]; |
| qcount = vsi->mqprio_qopt.qopt.count[i]; |
| if (qcount > max_qcount) |
| max_qcount = qcount; |
| vsi->tc_config.tc_info[i].qoffset = offset; |
| vsi->tc_config.tc_info[i].qcount = qcount; |
| vsi->tc_config.tc_info[i].netdev_tc = netdev_tc++; |
| } else { |
| /* TC is not enabled so set the offset to |
| * default queue and allocate one queue |
| * for the given TC. |
| */ |
| vsi->tc_config.tc_info[i].qoffset = 0; |
| vsi->tc_config.tc_info[i].qcount = 1; |
| vsi->tc_config.tc_info[i].netdev_tc = 0; |
| } |
| } |
| |
| /* Set actual Tx/Rx queue pairs */ |
| vsi->num_queue_pairs = offset + qcount; |
| |
| /* Setup queue TC[0].qmap for given VSI context */ |
| ctxt->info.tc_mapping[0] = cpu_to_le16(qmap); |
| ctxt->info.mapping_flags |= cpu_to_le16(I40E_AQ_VSI_QUE_MAP_CONTIG); |
| ctxt->info.queue_mapping[0] = cpu_to_le16(vsi->base_queue); |
| ctxt->info.valid_sections |= cpu_to_le16(sections); |
| |
| /* Reconfigure RSS for main VSI with max queue count */ |
| vsi->rss_size = max_qcount; |
| ret = i40e_vsi_config_rss(vsi); |
| if (ret) { |
| dev_info(&vsi->back->pdev->dev, |
| "Failed to reconfig rss for num_queues (%u)\n", |
| max_qcount); |
| return ret; |
| } |
| vsi->reconfig_rss = true; |
| dev_dbg(&vsi->back->pdev->dev, |
| "Reconfigured rss with num_queues (%u)\n", max_qcount); |
| |
| /* Find queue count available for channel VSIs and starting offset |
| * for channel VSIs |
| */ |
| override_q = vsi->mqprio_qopt.qopt.count[0]; |
| if (override_q && override_q < vsi->num_queue_pairs) { |
| vsi->cnt_q_avail = vsi->num_queue_pairs - override_q; |
| vsi->next_base_queue = override_q; |
| } |
| return 0; |
| } |
| |
| /** |
| * i40e_vsi_setup_queue_map - Setup a VSI queue map based on enabled_tc |
| * @vsi: the VSI being setup |
| * @ctxt: VSI context structure |
| * @enabled_tc: Enabled TCs bitmap |
| * @is_add: True if called before Add VSI |
| * |
| * Setup VSI queue mapping for enabled traffic classes. |
| **/ |
| static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi, |
| struct i40e_vsi_context *ctxt, |
| u8 enabled_tc, |
| bool is_add) |
| { |
| struct i40e_pf *pf = vsi->back; |
| u16 num_tc_qps = 0; |
| u16 sections = 0; |
| u8 netdev_tc = 0; |
| u16 numtc = 1; |
| u16 qcount; |
| u8 offset; |
| u16 qmap; |
| int i; |
| |
| sections = I40E_AQ_VSI_PROP_QUEUE_MAP_VALID; |
| offset = 0; |
| /* zero out queue mapping, it will get updated on the end of the function */ |
| memset(ctxt->info.queue_mapping, 0, sizeof(ctxt->info.queue_mapping)); |
| |
| if (vsi->type == I40E_VSI_MAIN) { |
| /* This code helps add more queue to the VSI if we have |
| * more cores than RSS can support, the higher cores will |
| * be served by ATR or other filters. Furthermore, the |
| * non-zero req_queue_pairs says that user requested a new |
| * queue count via ethtool's set_channels, so use this |
| * value for queues distribution across traffic classes |
| */ |
| if (vsi->req_queue_pairs > 0) |
| vsi->num_queue_pairs = vsi->req_queue_pairs; |
| else if (pf->flags & I40E_FLAG_MSIX_ENABLED) |
| vsi->num_queue_pairs = pf->num_lan_msix; |
| } |
| |
| /* Number of queues per enabled TC */ |
| if (vsi->type == I40E_VSI_MAIN || |
| (vsi->type == I40E_VSI_SRIOV && vsi->num_queue_pairs != 0)) |
| num_tc_qps = vsi->num_queue_pairs; |
| else |
| num_tc_qps = vsi->alloc_queue_pairs; |
| |
| if (enabled_tc && (vsi->back->flags & I40E_FLAG_DCB_ENABLED)) { |
| /* Find numtc from enabled TC bitmap */ |
| for (i = 0, numtc = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) { |
| if (enabled_tc & BIT(i)) /* TC is enabled */ |
| numtc++; |
| } |
| if (!numtc) { |
| dev_warn(&pf->pdev->dev, "DCB is enabled but no TC enabled, forcing TC0\n"); |
| numtc = 1; |
| } |
| num_tc_qps = num_tc_qps / numtc; |
| num_tc_qps = min_t(int, num_tc_qps, |
| i40e_pf_get_max_q_per_tc(pf)); |
| } |
| |
| vsi->tc_config.numtc = numtc; |
| vsi->tc_config.enabled_tc = enabled_tc ? enabled_tc : 1; |
| |
| /* Do not allow use more TC queue pairs than MSI-X vectors exist */ |
| if (pf->flags & I40E_FLAG_MSIX_ENABLED) |
| num_tc_qps = min_t(int, num_tc_qps, pf->num_lan_msix); |
| |
| /* Setup queue offset/count for all TCs for given VSI */ |
| for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) { |
| /* See if the given TC is enabled for the given VSI */ |
| if (vsi->tc_config.enabled_tc & BIT(i)) { |
| /* TC is enabled */ |
| int pow, num_qps; |
| |
| switch (vsi->type) { |
| case I40E_VSI_MAIN: |
| if (!(pf->flags & (I40E_FLAG_FD_SB_ENABLED | |
| I40E_FLAG_FD_ATR_ENABLED)) || |
| vsi->tc_config.enabled_tc != 1) { |
| qcount = min_t(int, pf->alloc_rss_size, |
| num_tc_qps); |
| break; |
| } |
| fallthrough; |
| case I40E_VSI_FDIR: |
| case I40E_VSI_SRIOV: |
| case I40E_VSI_VMDQ2: |
| default: |
| qcount = num_tc_qps; |
| WARN_ON(i != 0); |
| break; |
| } |
| vsi->tc_config.tc_info[i].qoffset = offset; |
| vsi->tc_config.tc_info[i].qcount = qcount; |
| |
| /* find the next higher power-of-2 of num queue pairs */ |
| num_qps = qcount; |
| pow = 0; |
| while (num_qps && (BIT_ULL(pow) < qcount)) { |
| pow++; |
| num_qps >>= 1; |
| } |
| |
| vsi->tc_config.tc_info[i].netdev_tc = netdev_tc++; |
| qmap = |
| (offset << I40E_AQ_VSI_TC_QUE_OFFSET_SHIFT) | |
| (pow << I40E_AQ_VSI_TC_QUE_NUMBER_SHIFT); |
| |
| offset += qcount; |
| } else { |
| /* TC is not enabled so set the offset to |
| * default queue and allocate one queue |
| * for the given TC. |
| */ |
| vsi->tc_config.tc_info[i].qoffset = 0; |
| vsi->tc_config.tc_info[i].qcount = 1; |
| vsi->tc_config.tc_info[i].netdev_tc = 0; |
| |
| qmap = 0; |
| } |
| ctxt->info.tc_mapping[i] = cpu_to_le16(qmap); |
| } |
| /* Do not change previously set num_queue_pairs for PFs and VFs*/ |
| if ((vsi->type == I40E_VSI_MAIN && numtc != 1) || |
| (vsi->type == I40E_VSI_SRIOV && vsi->num_queue_pairs == 0) || |
| (vsi->type != I40E_VSI_MAIN && vsi->type != I40E_VSI_SRIOV)) |
| vsi->num_queue_pairs = offset; |
| |
| /* Scheduler section valid can only be set for ADD VSI */ |
| if (is_add) { |
| sections |= I40E_AQ_VSI_PROP_SCHED_VALID; |
| |
| ctxt->info.up_enable_bits = enabled_tc; |
| } |
| if (vsi->type == I40E_VSI_SRIOV) { |
| ctxt->info.mapping_flags |= |
| cpu_to_le16(I40E_AQ_VSI_QUE_MAP_NONCONTIG); |
| for (i = 0; i < vsi->num_queue_pairs; i++) |
| ctxt->info.queue_mapping[i] = |
| cpu_to_le16(vsi->base_queue + i); |
| } else { |
| ctxt->info.mapping_flags |= |
| cpu_to_le16(I40E_AQ_VSI_QUE_MAP_CONTIG); |
| ctxt->info.queue_mapping[0] = cpu_to_le16(vsi->base_queue); |
| } |
| ctxt->info.valid_sections |= cpu_to_le16(sections); |
| } |
| |
| /** |
| * i40e_addr_sync - Callback for dev_(mc|uc)_sync to add address |
| * @netdev: the netdevice |
| * @addr: address to add |
| * |
| * Called by __dev_(mc|uc)_sync when an address needs to be added. We call |
| * __dev_(uc|mc)_sync from .set_rx_mode and guarantee to hold the hash lock. |
| */ |
| static int i40e_addr_sync(struct net_device *netdev, const u8 *addr) |
| { |
| struct i40e_netdev_priv *np = netdev_priv(netdev); |
| struct i40e_vsi *vsi = np->vsi; |
| |
| if (i40e_add_mac_filter(vsi, addr)) |
| return 0; |
| else |
| return -ENOMEM; |
| } |
| |
| /** |
| * i40e_addr_unsync - Callback for dev_(mc|uc)_sync to remove address |
| * @netdev: the netdevice |
| * @addr: address to add |
| * |
| * Called by __dev_(mc|uc)_sync when an address needs to be removed. We call |
| * __dev_(uc|mc)_sync from .set_rx_mode and guarantee to hold the hash lock. |
| */ |
| static int i40e_addr_unsync(struct net_device *netdev, const u8 *addr) |
| { |
| struct i40e_netdev_priv *np = netdev_priv(netdev); |
| struct i40e_vsi *vsi = np->vsi; |
| |
| /* Under some circumstances, we might receive a request to delete |
| * our own device address from our uc list. Because we store the |
| * device address in the VSI's MAC/VLAN filter list, we need to ignore |
| * such requests and not delete our device address from this list. |
| */ |
| if (ether_addr_equal(addr, netdev->dev_addr)) |
| return 0; |
| |
| i40e_del_mac_filter(vsi, addr); |
| |
| return 0; |
| } |
| |
| /** |
| * i40e_set_rx_mode - NDO callback to set the netdev filters |
| * @netdev: network interface device structure |
| **/ |
| static void i40e_set_rx_mode(struct net_device *netdev) |
| { |
| struct i40e_netdev_priv *np = netdev_priv(netdev); |
| struct i40e_vsi *vsi = np->vsi; |
| |
| spin_lock_bh(&vsi->mac_filter_hash_lock); |
| |
| __dev_uc_sync(netdev, i40e_addr_sync, i40e_addr_unsync); |
| __dev_mc_sync(netdev, i40e_addr_sync, i40e_addr_unsync); |
| |
| spin_unlock_bh(&vsi->mac_filter_hash_lock); |
| |
| /* check for other flag changes */ |
| if (vsi->current_netdev_flags != vsi->netdev->flags) { |
| vsi->flags |= I40E_VSI_FLAG_FILTER_CHANGED; |
| set_bit(__I40E_MACVLAN_SYNC_PENDING, vsi->back->state); |
| } |
| } |
| |
| /** |
| * i40e_undo_del_filter_entries - Undo the changes made to MAC filter entries |
| * @vsi: Pointer to VSI struct |
| * @from: Pointer to list which contains MAC filter entries - changes to |
| * those entries needs to be undone. |
| * |
| * MAC filter entries from this list were slated for deletion. |
| **/ |
| static void i40e_undo_del_filter_entries(struct i40e_vsi *vsi, |
| struct hlist_head *from) |
| { |
| struct i40e_mac_filter *f; |
| struct hlist_node *h; |
| |
| hlist_for_each_entry_safe(f, h, from, hlist) { |
| u64 key = i40e_addr_to_hkey(f->macaddr); |
| |
| /* Move the element back into MAC filter list*/ |
| hlist_del(&f->hlist); |
| hash_add(vsi->mac_filter_hash, &f->hlist, key); |
| } |
| } |
| |
| /** |
| * i40e_undo_add_filter_entries - Undo the changes made to MAC filter entries |
| * @vsi: Pointer to vsi struct |
| * @from: Pointer to list which contains MAC filter entries - changes to |
| * those entries needs to be undone. |
| * |
| * MAC filter entries from this list were slated for addition. |
| **/ |
| static void i40e_undo_add_filter_entries(struct i40e_vsi *vsi, |
| struct hlist_head *from) |
| { |
| struct i40e_new_mac_filter *new; |
| struct hlist_node *h; |
| |
| hlist_for_each_entry_safe(new, h, from, hlist) { |
| /* We can simply free the wrapper structure */ |
| hlist_del(&new->hlist); |
| kfree(new); |
| } |
| } |
| |
| /** |
| * i40e_next_filter - Get the next non-broadcast filter from a list |
| * @next: pointer to filter in list |
| * |
| * Returns the next non-broadcast filter in the list. Required so that we |
| * ignore broadcast filters within the list, since these are not handled via |
| * the normal firmware update path. |
| */ |
| static |
| struct i40e_new_mac_filter *i40e_next_filter(struct i40e_new_mac_filter *next) |
| { |
| hlist_for_each_entry_continue(next, hlist) { |
| if (!is_broadcast_ether_addr(next->f->macaddr)) |
| return next; |
| } |
| |
| return NULL; |
| } |
| |
| /** |
| * i40e_update_filter_state - Update filter state based on return data |
| * from firmware |
| * @count: Number of filters added |
| * @add_list: return data from fw |
| * @add_head: pointer to first filter in current batch |
| * |
| * MAC filter entries from list were slated to be added to device. Returns |
| * number of successful filters. Note that 0 does NOT mean success! |
| **/ |
| static int |
| i40e_update_filter_state(int count, |
| struct i40e_aqc_add_macvlan_element_data *add_list, |
| struct i40e_new_mac_filter *add_head) |
| { |
| int retval = 0; |
| int i; |
| |
| for (i = 0; i < count; i++) { |
| /* Always check status of each filter. We don't need to check |
| * the firmware return status because we pre-set the filter |
| * status to I40E_AQC_MM_ERR_NO_RES when sending the filter |
| * request to the adminq. Thus, if it no longer matches then |
| * we know the filter is active. |
| */ |
| if (add_list[i].match_method == I40E_AQC_MM_ERR_NO_RES) { |
| add_head->state = I40E_FILTER_FAILED; |
| } else { |
| add_head->state = I40E_FILTER_ACTIVE; |
| retval++; |
| } |
| |
| add_head = i40e_next_filter(add_head); |
| if (!add_head) |
| break; |
| } |
| |
| return retval; |
| } |
| |
| /** |
| * i40e_aqc_del_filters - Request firmware to delete a set of filters |
| * @vsi: ptr to the VSI |
| * @vsi_name: name to display in messages |
| * @list: the list of filters to send to firmware |
| * @num_del: the number of filters to delete |
| * @retval: Set to -EIO on failure to delete |
| * |
| * Send a request to firmware via AdminQ to delete a set of filters. Uses |
| * *retval instead of a return value so that success does not force ret_val to |
| * be set to 0. This ensures that a sequence of calls to this function |
| * preserve the previous value of *retval on successful delete. |
| */ |
| static |
| void i40e_aqc_del_filters(struct i40e_vsi *vsi, const char *vsi_name, |
| struct i40e_aqc_remove_macvlan_element_data *list, |
| int num_del, int *retval) |
| { |
| struct i40e_hw *hw = &vsi->back->hw; |
| i40e_status aq_ret; |
| int aq_err; |
| |
| aq_ret = i40e_aq_remove_macvlan(hw, vsi->seid, list, num_del, NULL); |
| aq_err = hw->aq.asq_last_status; |
| |
| /* Explicitly ignore and do not report when firmware returns ENOENT */ |
| if (aq_ret && !(aq_err == I40E_AQ_RC_ENOENT)) { |
| *retval = -EIO; |
| dev_info(&vsi->back->pdev->dev, |
| "ignoring delete macvlan error on %s, err %s, aq_err %s\n", |
| vsi_name, i40e_stat_str(hw, aq_ret), |
| i40e_aq_str(hw, aq_err)); |
| } |
| } |
| |
| /** |
| * i40e_aqc_add_filters - Request firmware to add a set of filters |
| * @vsi: ptr to the VSI |
| * @vsi_name: name to display in messages |
| * @list: the list of filters to send to firmware |
| * @add_head: Position in the add hlist |
| * @num_add: the number of filters to add |
| * |
| * Send a request to firmware via AdminQ to add a chunk of filters. Will set |
| * __I40E_VSI_OVERFLOW_PROMISC bit in vsi->state if the firmware has run out of |
| * space for more filters. |
| */ |
| static |
| void i40e_aqc_add_filters(struct i40e_vsi *vsi, const char *vsi_name, |
| struct i40e_aqc_add_macvlan_element_data *list, |
| struct i40e_new_mac_filter *add_head, |
| int num_add) |
| { |
| struct i40e_hw *hw = &vsi->back->hw; |
| int aq_err, fcnt; |
| |
| i40e_aq_add_macvlan(hw, vsi->seid, list, num_add, NULL); |
| aq_err = hw->aq.asq_last_status; |
| fcnt = i40e_update_filter_state(num_add, list, add_head); |
| |
| if (fcnt != num_add) { |
| if (vsi->type == I40E_VSI_MAIN) { |
| set_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state); |
| dev_warn(&vsi->back->pdev->dev, |
| "Error %s adding RX filters on %s, promiscuous mode forced on\n", |
| i40e_aq_str(hw, aq_err), vsi_name); |
| } else if (vsi->type == I40E_VSI_SRIOV || |
| vsi->type == I40E_VSI_VMDQ1 || |
| vsi->type == I40E_VSI_VMDQ2) { |
| dev_warn(&vsi->back->pdev->dev, |
| "Error %s adding RX filters on %s, please set promiscuous on manually for %s\n", |
| i40e_aq_str(hw, aq_err), vsi_name, vsi_name); |
| } else { |
| dev_warn(&vsi->back->pdev->dev, |
| "Error %s adding RX filters on %s, incorrect VSI type: %i.\n", |
| i40e_aq_str(hw, aq_err), vsi_name, vsi->type); |
| } |
| } |
| } |
| |
| /** |
| * i40e_aqc_broadcast_filter - Set promiscuous broadcast flags |
| * @vsi: pointer to the VSI |
| * @vsi_name: the VSI name |
| * @f: filter data |
| * |
| * This function sets or clears the promiscuous broadcast flags for VLAN |
| * filters in order to properly receive broadcast frames. Assumes that only |
| * broadcast filters are passed. |
| * |
| * Returns status indicating success or failure; |
| **/ |
| static i40e_status |
| i40e_aqc_broadcast_filter(struct i40e_vsi *vsi, const char *vsi_name, |
| struct i40e_mac_filter *f) |
| { |
| bool enable = f->state == I40E_FILTER_NEW; |
| struct i40e_hw *hw = &vsi->back->hw; |
| i40e_status aq_ret; |
| |
| if (f->vlan == I40E_VLAN_ANY) { |
| aq_ret = i40e_aq_set_vsi_broadcast(hw, |
| vsi->seid, |
| enable, |
| NULL); |
| } else { |
| aq_ret = i40e_aq_set_vsi_bc_promisc_on_vlan(hw, |
| vsi->seid, |
| enable, |
| f->vlan, |
| NULL); |
| } |
| |
| if (aq_ret) { |
| set_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state); |
| dev_warn(&vsi->back->pdev->dev, |
| "Error %s, forcing overflow promiscuous on %s\n", |
| i40e_aq_str(hw, hw->aq.asq_last_status), |
| vsi_name); |
| } |
| |
| return aq_ret; |
| } |
| |
| /** |
| * i40e_set_promiscuous - set promiscuous mode |
| * @pf: board private structure |
| * @promisc: promisc on or off |
| * |
| * There are different ways of setting promiscuous mode on a PF depending on |
| * what state/environment we're in. This identifies and sets it appropriately. |
| * Returns 0 on success. |
| **/ |
| static int i40e_set_promiscuous(struct i40e_pf *pf, bool promisc) |
| { |
| struct i40e_vsi *vsi = pf->vsi[pf->lan_vsi]; |
| struct i40e_hw *hw = &pf->hw; |
| i40e_status aq_ret; |
| |
| if (vsi->type == I40E_VSI_MAIN && |
| pf->lan_veb != I40E_NO_VEB && |
| !(pf->flags & I40E_FLAG_MFP_ENABLED)) { |
| /* set defport ON for Main VSI instead of true promisc |
| * this way we will get all unicast/multicast and VLAN |
| * promisc behavior but will not get VF or VMDq traffic |
| * replicated on the Main VSI. |
| */ |
| if (promisc) |
| aq_ret = i40e_aq_set_default_vsi(hw, |
| vsi->seid, |
| NULL); |
| else |
| aq_ret = i40e_aq_clear_default_vsi(hw, |
| vsi->seid, |
| NULL); |
| if (aq_ret) { |
| dev_info(&pf->pdev->dev, |
| "Set default VSI failed, err %s, aq_err %s\n", |
| i40e_stat_str(hw, aq_ret), |
| i40e_aq_str(hw, hw->aq.asq_last_status)); |
| } |
| } else { |
| aq_ret = i40e_aq_set_vsi_unicast_promiscuous( |
| hw, |
| vsi->seid, |
| promisc, NULL, |
| true); |
| if (aq_ret) { |
| dev_info(&pf->pdev->dev, |
| "set unicast promisc failed, err %s, aq_err %s\n", |
| i40e_stat_str(hw, aq_ret), |
| i40e_aq_str(hw, hw->aq.asq_last_status)); |
| } |
| aq_ret = i40e_aq_set_vsi_multicast_promiscuous( |
| hw, |
| vsi->seid, |
| promisc, NULL); |
| if (aq_ret) { |
| dev_info(&pf->pdev->dev, |
| "set multicast promisc failed, err %s, aq_err %s\n", |
| i40e_stat_str(hw, aq_ret), |
| i40e_aq_str(hw, hw->aq.asq_last_status)); |
| } |
| } |
| |
| if (!aq_ret) |
| pf->cur_promisc = promisc; |
| |
| return aq_ret; |
| } |
| |
| /** |
| * i40e_sync_vsi_filters - Update the VSI filter list to the HW |
| * @vsi: ptr to the VSI |
| * |
| * Push any outstanding VSI filter changes through the AdminQ. |
| * |
| * Returns 0 or error value |
| **/ |
| int i40e_sync_vsi_filters(struct i40e_vsi *vsi) |
| { |
| struct hlist_head tmp_add_list, tmp_del_list; |
| struct i40e_mac_filter *f; |
| struct i40e_new_mac_filter *new, *add_head = NULL; |
| struct i40e_hw *hw = &vsi->back->hw; |
| bool old_overflow, new_overflow; |
| unsigned int failed_filters = 0; |
| unsigned int vlan_filters = 0; |
| char vsi_name[16] = "PF"; |
| int filter_list_len = 0; |
| i40e_status aq_ret = 0; |
| u32 changed_flags = 0; |
| struct hlist_node *h; |
| struct i40e_pf *pf; |
| int num_add = 0; |
| int num_del = 0; |
| int retval = 0; |
| u16 cmd_flags; |
| int list_size; |
| int bkt; |
| |
| /* empty array typed pointers, kcalloc later */ |
| struct i40e_aqc_add_macvlan_element_data *add_list; |
| struct i40e_aqc_remove_macvlan_element_data *del_list; |
| |
| while (test_and_set_bit(__I40E_VSI_SYNCING_FILTERS, vsi->state)) |
| usleep_range(1000, 2000); |
| pf = vsi->back; |
| |
| old_overflow = test_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state); |
| |
| if (vsi->netdev) { |
| changed_flags = vsi->current_netdev_flags ^ vsi->netdev->flags; |
| vsi->current_netdev_flags = vsi->netdev->flags; |
| } |
| |
| INIT_HLIST_HEAD(&tmp_add_list); |
| INIT_HLIST_HEAD(&tmp_del_list); |
| |
| if (vsi->type == I40E_VSI_SRIOV) |
| snprintf(vsi_name, sizeof(vsi_name) - 1, "VF %d", vsi->vf_id); |
| else if (vsi->type != I40E_VSI_MAIN) |
| snprintf(vsi_name, sizeof(vsi_name) - 1, "vsi %d", vsi->seid); |
| |
| if (vsi->flags & I40E_VSI_FLAG_FILTER_CHANGED) { |
| vsi->flags &= ~I40E_VSI_FLAG_FILTER_CHANGED; |
| |
| spin_lock_bh(&vsi->mac_filter_hash_lock); |
| /* Create a list of filters to delete. */ |
| hash_for_each_safe(vsi->mac_filter_hash, bkt, h, f, hlist) { |
| if (f->state == I40E_FILTER_REMOVE) { |
| /* Move the element into temporary del_list */ |
| hash_del(&f->hlist); |
| hlist_add_head(&f->hlist, &tmp_del_list); |
| |
| /* Avoid counting removed filters */ |
| continue; |
| } |
| if (f->state == I40E_FILTER_NEW) { |
| /* Create a temporary i40e_new_mac_filter */ |
| new = kzalloc(sizeof(*new), GFP_ATOMIC); |
| if (!new) |
| goto err_no_memory_locked; |
| |
| /* Store pointer to the real filter */ |
| new->f = f; |
| new->state = f->state; |
| |
| /* Add it to the hash list */ |
| hlist_add_head(&new->hlist, &tmp_add_list); |
| } |
| |
| /* Count the number of active (current and new) VLAN |
| * filters we have now. Does not count filters which |
| * are marked for deletion. |
| */ |
| if (f->vlan > 0) |
| vlan_filters++; |
| } |
| |
| retval = i40e_correct_mac_vlan_filters(vsi, |
| &tmp_add_list, |
| &tmp_del_list, |
| vlan_filters); |
| if (retval) |
| goto err_no_memory_locked; |
| |
| spin_unlock_bh(&vsi->mac_filter_hash_lock); |
| } |
| |
| /* Now process 'del_list' outside the lock */ |
| if (!hlist_empty(&tmp_del_list)) { |
| filter_list_len = hw->aq.asq_buf_size / |
| sizeof(struct i40e_aqc_remove_macvlan_element_data); |
| list_size = filter_list_len * |
| sizeof(struct i40e_aqc_remove_macvlan_element_data); |
| del_list = kzalloc(list_size, GFP_ATOMIC); |
| if (!del_list) |
| goto err_no_memory; |
| |
| hlist_for_each_entry_safe(f, h, &tmp_del_list, hlist) { |
| cmd_flags = 0; |
| |
| /* handle broadcast filters by updating the broadcast |
| * promiscuous flag and release filter list. |
| */ |
| if (is_broadcast_ether_addr(f->macaddr)) { |
| i40e_aqc_broadcast_filter(vsi, vsi_name, f); |
| |
| hlist_del(&f->hlist); |
| kfree(f); |
| continue; |
| } |
| |
| /* add to delete list */ |
| ether_addr_copy(del_list[num_del].mac_addr, f->macaddr); |
| if (f->vlan == I40E_VLAN_ANY) { |
| del_list[num_del].vlan_tag = 0; |
| cmd_flags |= I40E_AQC_MACVLAN_DEL_IGNORE_VLAN; |
| } else { |
| del_list[num_del].vlan_tag = |
| cpu_to_le16((u16)(f->vlan)); |
| } |
| |
| cmd_flags |= I40E_AQC_MACVLAN_DEL_PERFECT_MATCH; |
| del_list[num_del].flags = cmd_flags; |
| num_del++; |
| |
| /* flush a full buffer */ |
| if (num_del == filter_list_len) { |
| i40e_aqc_del_filters(vsi, vsi_name, del_list, |
| num_del, &retval); |
| memset(del_list, 0, list_size); |
| num_del = 0; |
| } |
| /* Release memory for MAC filter entries which were |
| * synced up with HW. |
| */ |
| hlist_del(&f->hlist); |
| kfree(f); |
| } |
| |
| if (num_del) { |
| i40e_aqc_del_filters(vsi, vsi_name, del_list, |
| num_del, &retval); |
| } |
| |
| kfree(del_list); |
| del_list = NULL; |
| } |
| |
| if (!hlist_empty(&tmp_add_list)) { |
| /* Do all the adds now. */ |
| filter_list_len = hw->aq.asq_buf_size / |
| sizeof(struct i40e_aqc_add_macvlan_element_data); |
| list_size = filter_list_len * |
| sizeof(struct i40e_aqc_add_macvlan_element_data); |
| add_list = kzalloc(list_size, GFP_ATOMIC); |
| if (!add_list) |
| goto err_no_memory; |
| |
| num_add = 0; |
| hlist_for_each_entry_safe(new, h, &tmp_add_list, hlist) { |
| /* handle broadcast filters by updating the broadcast |
| * promiscuous flag instead of adding a MAC filter. |
| */ |
| if (is_broadcast_ether_addr(new->f->macaddr)) { |
| if (i40e_aqc_broadcast_filter(vsi, vsi_name, |
| new->f)) |
| new->state = I40E_FILTER_FAILED; |
| else |
| new->state = I40E_FILTER_ACTIVE; |
| continue; |
| } |
| |
| /* add to add array */ |
| if (num_add == 0) |
| add_head = new; |
| cmd_flags = 0; |
| ether_addr_copy(add_list[num_add].mac_addr, |
| new->f->macaddr); |
| if (new->f->vlan == I40E_VLAN_ANY) { |
| add_list[num_add].vlan_tag = 0; |
| cmd_flags |= I40E_AQC_MACVLAN_ADD_IGNORE_VLAN; |
| } else { |
| add_list[num_add].vlan_tag = |
| cpu_to_le16((u16)(new->f->vlan)); |
| } |
| add_list[num_add].queue_number = 0; |
| /* set invalid match method for later detection */ |
| add_list[num_add].match_method = I40E_AQC_MM_ERR_NO_RES; |
| cmd_flags |= I40E_AQC_MACVLAN_ADD_PERFECT_MATCH; |
| add_list[num_add].flags = cpu_to_le16(cmd_flags); |
| num_add++; |
| |
| /* flush a full buffer */ |
| if (num_add == filter_list_len) { |
| i40e_aqc_add_filters(vsi, vsi_name, add_list, |
| add_head, num_add); |
| memset(add_list, 0, list_size); |
| num_add = 0; |
| } |
| } |
| if (num_add) { |
| i40e_aqc_add_filters(vsi, vsi_name, add_list, add_head, |
| num_add); |
| } |
| /* Now move all of the filters from the temp add list back to |
| * the VSI's list. |
| */ |
| spin_lock_bh(&vsi->mac_filter_hash_lock); |
| hlist_for_each_entry_safe(new, h, &tmp_add_list, hlist) { |
| /* Only update the state if we're still NEW */ |
| if (new->f->state == I40E_FILTER_NEW) |
| new->f->state = new->state; |
| hlist_del(&new->hlist); |
| kfree(new); |
| } |
| spin_unlock_bh(&vsi->mac_filter_hash_lock); |
| kfree(add_list); |
| add_list = NULL; |
| } |
| |
| /* Determine the number of active and failed filters. */ |
| spin_lock_bh(&vsi->mac_filter_hash_lock); |
| vsi->active_filters = 0; |
| hash_for_each(vsi->mac_filter_hash, bkt, f, hlist) { |
| if (f->state == I40E_FILTER_ACTIVE) |
| vsi->active_filters++; |
| else if (f->state == I40E_FILTER_FAILED) |
| failed_filters++; |
| } |
| spin_unlock_bh(&vsi->mac_filter_hash_lock); |
| |
| /* Check if we are able to exit overflow promiscuous mode. We can |
| * safely exit if we didn't just enter, we no longer have any failed |
| * filters, and we have reduced filters below the threshold value. |
| */ |
| if (old_overflow && !failed_filters && |
| vsi->active_filters < vsi->promisc_threshold) { |
| dev_info(&pf->pdev->dev, |
| "filter logjam cleared on %s, leaving overflow promiscuous mode\n", |
| vsi_name); |
| clear_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state); |
| vsi->promisc_threshold = 0; |
| } |
| |
| /* if the VF is not trusted do not do promisc */ |
| if ((vsi->type == I40E_VSI_SRIOV) && !pf->vf[vsi->vf_id].trusted) { |
| clear_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state); |
| goto out; |
| } |
| |
| new_overflow = test_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state); |
| |
| /* If we are entering overflow promiscuous, we need to calculate a new |
| * threshold for when we are safe to exit |
| */ |
| if (!old_overflow && new_overflow) |
| vsi->promisc_threshold = (vsi->active_filters * 3) / 4; |
| |
| /* check for changes in promiscuous modes */ |
| if (changed_flags & IFF_ALLMULTI) { |
| bool cur_multipromisc; |
| |
| cur_multipromisc = !!(vsi->current_netdev_flags & IFF_ALLMULTI); |
| aq_ret = i40e_aq_set_vsi_multicast_promiscuous(&vsi->back->hw, |
| vsi->seid, |
| cur_multipromisc, |
| NULL); |
| if (aq_ret) { |
| retval = i40e_aq_rc_to_posix(aq_ret, |
| hw->aq.asq_last_status); |
| dev_info(&pf->pdev->dev, |
| "set multi promisc failed on %s, err %s aq_err %s\n", |
| vsi_name, |
| i40e_stat_str(hw, aq_ret), |
| i40e_aq_str(hw, hw->aq.asq_last_status)); |
| } else { |
| dev_info(&pf->pdev->dev, "%s allmulti mode.\n", |
| cur_multipromisc ? "entering" : "leaving"); |
| } |
| } |
| |
| if ((changed_flags & IFF_PROMISC) || old_overflow != new_overflow) { |
| bool cur_promisc; |
| |
| cur_promisc = (!!(vsi->current_netdev_flags & IFF_PROMISC) || |
| new_overflow); |
| aq_ret = i40e_set_promiscuous(pf, cur_promisc); |
| if (aq_ret) { |
| retval = i40e_aq_rc_to_posix(aq_ret, |
| hw->aq.asq_last_status); |
| dev_info(&pf->pdev->dev, |
| "Setting promiscuous %s failed on %s, err %s aq_err %s\n", |
| cur_promisc ? "on" : "off", |
| vsi_name, |
| i40e_stat_str(hw, aq_ret), |
| i40e_aq_str(hw, hw->aq.asq_last_status)); |
| } |
| } |
| out: |
| /* if something went wrong then set the changed flag so we try again */ |
| if (retval) |
| vsi->flags |= I40E_VSI_FLAG_FILTER_CHANGED; |
| |
| clear_bit(__I40E_VSI_SYNCING_FILTERS, vsi->state); |
| return retval; |
| |
| err_no_memory: |
| /* Restore elements on the temporary add and delete lists */ |
| spin_lock_bh(&vsi->mac_filter_hash_lock); |
| err_no_memory_locked: |
| i40e_undo_del_filter_entries(vsi, &tmp_del_list); |
| i40e_undo_add_filter_entries(vsi, &tmp_add_list); |
| spin_unlock_bh(&vsi->mac_filter_hash_lock); |
| |
| vsi->flags |= I40E_VSI_FLAG_FILTER_CHANGED; |
| clear_bit(__I40E_VSI_SYNCING_FILTERS, vsi->state); |
| return -ENOMEM; |
| } |
| |
| /** |
| * i40e_sync_filters_subtask - Sync the VSI filter list with HW |
| * @pf: board private structure |
| **/ |
| static void i40e_sync_filters_subtask(struct i40e_pf *pf) |
| { |
| int v; |
| |
| if (!pf) |
| return; |
| if (!test_and_clear_bit(__I40E_MACVLAN_SYNC_PENDING, pf->state)) |
| return; |
| if (test_bit(__I40E_VF_DISABLE, pf->state)) { |
| set_bit(__I40E_MACVLAN_SYNC_PENDING, pf->state); |
| return; |
| } |
| |
| for (v = 0; v < pf->num_alloc_vsi; v++) { |
| if (pf->vsi[v] && |
| (pf->vsi[v]->flags & I40E_VSI_FLAG_FILTER_CHANGED) && |
| !test_bit(__I40E_VSI_RELEASING, pf->vsi[v]->state)) { |
| int ret = i40e_sync_vsi_filters(pf->vsi[v]); |
| |
| if (ret) { |
| /* come back and try again later */ |
| set_bit(__I40E_MACVLAN_SYNC_PENDING, |
| pf->state); |
| break; |
| } |
| } |
| } |
| } |
| |
| /** |
| * i40e_max_xdp_frame_size - returns the maximum allowed frame size for XDP |
| * @vsi: the vsi |
| **/ |
| static int i40e_max_xdp_frame_size(struct i40e_vsi *vsi) |
| { |
| if (PAGE_SIZE >= 8192 || (vsi->back->flags & I40E_FLAG_LEGACY_RX)) |
| return I40E_RXBUFFER_2048; |
| else |
| return I40E_RXBUFFER_3072; |
| } |
| |
| /** |
| * i40e_change_mtu - NDO callback to change the Maximum Transfer Unit |
| * @netdev: network interface device structure |
| * @new_mtu: new value for maximum frame size |
| * |
| * Returns 0 on success, negative on failure |
| **/ |
| static int i40e_change_mtu(struct net_device *netdev, int new_mtu) |
| { |
| struct i40e_netdev_priv *np = netdev_priv(netdev); |
| struct i40e_vsi *vsi = np->vsi; |
| struct i40e_pf *pf = vsi->back; |
| |
| if (i40e_enabled_xdp_vsi(vsi)) { |
| int frame_size = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN; |
| |
| if (frame_size > i40e_max_xdp_frame_size(vsi)) |
| return -EINVAL; |
| } |
| |
| netdev_dbg(netdev, "changing MTU from %d to %d\n", |
| netdev->mtu, new_mtu); |
| netdev->mtu = new_mtu; |
| if (netif_running(netdev)) |
| i40e_vsi_reinit_locked(vsi); |
| set_bit(__I40E_CLIENT_SERVICE_REQUESTED, pf->state); |
| set_bit(__I40E_CLIENT_L2_CHANGE, pf->state); |
| return 0; |
| } |
| |
| /** |
| * i40e_ioctl - Access the hwtstamp interface |
| * @netdev: network interface device structure |
| * @ifr: interface request data |
| * @cmd: ioctl command |
| **/ |
| int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) |
| { |
| struct i40e_netdev_priv *np = netdev_priv(netdev); |
| struct i40e_pf *pf = np->vsi->back; |
| |
| switch (cmd) { |
| case SIOCGHWTSTAMP: |
| return i40e_ptp_get_ts_config(pf, ifr); |
| case SIOCSHWTSTAMP: |
| return i40e_ptp_set_ts_config(pf, ifr); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| /** |
| * i40e_vlan_stripping_enable - Turn on vlan stripping for the VSI |
| * @vsi: the vsi being adjusted |
| **/ |
| void i40e_vlan_stripping_enable(struct i40e_vsi *vsi) |
| { |
| struct i40e_vsi_context ctxt; |
| i40e_status ret; |
| |
| /* Don't modify stripping options if a port VLAN is active */ |
| if (vsi->info.pvid) |
| return; |
| |
| if ((vsi->info.valid_sections & |
| cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID)) && |
| ((vsi->info.port_vlan_flags & I40E_AQ_VSI_PVLAN_MODE_MASK) == 0)) |
| return; /* already enabled */ |
| |