diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index a344f3d..330ef2d 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -24,8 +24,8 @@
 config OMAP_USB2
 	tristate "OMAP USB2 PHY Driver"
 	depends on ARCH_OMAP2PLUS
+	depends on USB_PHY
 	select GENERIC_PHY
-	select USB_PHY
 	select OMAP_CONTROL_USB
 	help
 	  Enable this to support the transceiver that is part of SOC. This
@@ -36,8 +36,8 @@
 config TWL4030_USB
 	tristate "TWL4030 USB Transceiver Driver"
 	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
+	depends on USB_PHY
 	select GENERIC_PHY
-	select USB_PHY
 	help
 	  Enable this to support the USB OTG transceiver on TWL4030
 	  family chips (including the TWL5030 and TPS659x0 devices).
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index 03cf8fb..58e0e97 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -437,23 +437,18 @@
 	int id;
 	struct phy *phy;
 
-	if (!dev) {
-		dev_WARN(dev, "no device provided for PHY\n");
-		ret = -EINVAL;
-		goto err0;
-	}
+	if (WARN_ON(!dev))
+		return ERR_PTR(-EINVAL);
 
 	phy = kzalloc(sizeof(*phy), GFP_KERNEL);
-	if (!phy) {
-		ret = -ENOMEM;
-		goto err0;
-	}
+	if (!phy)
+		return ERR_PTR(-ENOMEM);
 
 	id = ida_simple_get(&phy_ida, 0, 0, GFP_KERNEL);
 	if (id < 0) {
 		dev_err(dev, "unable to get id\n");
 		ret = id;
-		goto err0;
+		goto free_phy;
 	}
 
 	device_initialize(&phy->dev);
@@ -468,11 +463,11 @@
 
 	ret = dev_set_name(&phy->dev, "phy-%s.%d", dev_name(dev), id);
 	if (ret)
-		goto err1;
+		goto put_dev;
 
 	ret = device_add(&phy->dev);
 	if (ret)
-		goto err1;
+		goto put_dev;
 
 	if (pm_runtime_enabled(dev)) {
 		pm_runtime_enable(&phy->dev);
@@ -481,12 +476,11 @@
 
 	return phy;
 
-err1:
-	ida_remove(&phy_ida, phy->id);
+put_dev:
 	put_device(&phy->dev);
+	ida_remove(&phy_ida, phy->id);
+free_phy:
 	kfree(phy);
-
-err0:
 	return ERR_PTR(ret);
 }
 EXPORT_SYMBOL_GPL(phy_create);
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 5d8981c..6e73f8c 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -642,6 +642,10 @@
 			: CI_ROLE_GADGET;
 	}
 
+	/* only update vbus status for peripheral */
+	if (ci->role == CI_ROLE_GADGET)
+		ci_handle_vbus_change(ci);
+
 	ret = ci_role_start(ci, ci->role);
 	if (ret) {
 		dev_err(dev, "can't start %s role\n", ci_role(ci)->name);
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 59e6020..526cd77 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -88,7 +88,8 @@
 	return ret;
 
 disable_reg:
-	regulator_disable(ci->platdata->reg_vbus);
+	if (ci->platdata->reg_vbus)
+		regulator_disable(ci->platdata->reg_vbus);
 
 put_hcd:
 	usb_put_hcd(hcd);
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index b34c819..69d20fb 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1795,9 +1795,6 @@
 	pm_runtime_no_callbacks(&ci->gadget.dev);
 	pm_runtime_enable(&ci->gadget.dev);
 
-	/* Update ci->vbus_active */
-	ci_handle_vbus_change(ci);
-
 	return retval;
 
 destroy_eps:
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 4d38759..0b23a86 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -854,13 +854,11 @@
 {
 	/* need autopm_get/put here to ensure the usbcore sees the new value */
 	int rv = usb_autopm_get_interface(intf);
-	if (rv < 0)
-		goto err;
 
 	intf->needs_remote_wakeup = on;
-	usb_autopm_put_interface(intf);
-err:
-	return rv;
+	if (!rv)
+		usb_autopm_put_interface(intf);
+	return 0;
 }
 
 static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 74f9cf0..a49217a 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -455,9 +455,6 @@
 	if (IS_ERR(regs))
 		return PTR_ERR(regs);
 
-	usb_phy_set_suspend(dwc->usb2_phy, 0);
-	usb_phy_set_suspend(dwc->usb3_phy, 0);
-
 	spin_lock_init(&dwc->lock);
 	platform_set_drvdata(pdev, dwc);
 
@@ -488,6 +485,9 @@
 		goto err0;
 	}
 
+	usb_phy_set_suspend(dwc->usb2_phy, 0);
+	usb_phy_set_suspend(dwc->usb3_phy, 0);
+
 	ret = dwc3_event_buffers_setup(dwc);
 	if (ret) {
 		dev_err(dwc->dev, "failed to setup event buffers\n");
@@ -569,6 +569,8 @@
 	dwc3_event_buffers_cleanup(dwc);
 
 err1:
+	usb_phy_set_suspend(dwc->usb2_phy, 1);
+	usb_phy_set_suspend(dwc->usb3_phy, 1);
 	dwc3_core_exit(dwc);
 
 err0:
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 418444e..8c356af7 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -136,23 +136,27 @@
 	struct ohci_hcd *ohci;
 	int retval;
 	struct usb_hcd *hcd = NULL;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	int irq;
 
-	if (pdev->num_resources != 2) {
-		pr_debug("hcd probe: invalid num_resources");
-		return -ENODEV;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_dbg(dev, "hcd probe: missing memory resource\n");
+		return -ENXIO;
 	}
 
-	if ((pdev->resource[0].flags != IORESOURCE_MEM)
-			|| (pdev->resource[1].flags != IORESOURCE_IRQ)) {
-		pr_debug("hcd probe: invalid resource type\n");
-		return -ENODEV;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_dbg(dev, "hcd probe: missing irq resource\n");
+		return irq;
 	}
 
 	hcd = usb_create_hcd(driver, &pdev->dev, "at91");
 	if (!hcd)
 		return -ENOMEM;
-	hcd->rsrc_start = pdev->resource[0].start;
-	hcd->rsrc_len = resource_size(&pdev->resource[0]);
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
 
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 		pr_debug("request_mem_region failed\n");
@@ -199,7 +203,7 @@
 	ohci->num_ports = board->ports;
 	at91_start_hc(pdev);
 
-	retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_SHARED);
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (retval == 0)
 		return retval;
 
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index b8dffd5..73f5208 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -128,7 +128,12 @@
 		 * any other sleep) on Haswell machines with LPT and LPT-LP
 		 * with the new Intel BIOS
 		 */
-		xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
+		/* Limit the quirk to only known vendors, as this triggers
+		 * yet another BIOS bug on some other machines
+		 * https://bugzilla.kernel.org/show_bug.cgi?id=66171
+		 */
+		if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)
+			xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 08e2f39..2b41c63 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -19,8 +19,9 @@
 	  in host mode, low speed.
 
 config FSL_USB2_OTG
-	bool "Freescale USB OTG Transceiver Driver"
+	tristate "Freescale USB OTG Transceiver Driver"
 	depends on USB_EHCI_FSL && USB_FSL_USB2 && PM_RUNTIME
+	depends on USB
 	select USB_OTG
 	select USB_PHY
 	help
@@ -29,6 +30,7 @@
 config ISP1301_OMAP
 	tristate "Philips ISP1301 with OMAP OTG"
 	depends on I2C && ARCH_OMAP_OTG
+	depends on USB
 	select USB_PHY
 	help
 	  If you say yes here you get support for the Philips ISP1301
diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index 82232ac..bbe4f8e 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -876,7 +876,7 @@
 
 	tegra_phy->pad_regs = devm_ioremap(&pdev->dev, res->start,
 		resource_size(res));
-	if (!tegra_phy->regs) {
+	if (!tegra_phy->pad_regs) {
 		dev_err(&pdev->dev, "Failed to remap UTMI Pad regs\n");
 		return -ENOMEM;
 	}
diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
index 30e8a61..bad57ce 100644
--- a/drivers/usb/phy/phy-twl6030-usb.c
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -127,7 +127,8 @@
 
 static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address)
 {
-	u8 data, ret = 0;
+	u8 data;
+	int ret;
 
 	ret = twl_i2c_read_u8(module, &data, address);
 	if (ret >= 0)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 496b7e39..cc7a241 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -251,6 +251,7 @@
 #define ZTE_PRODUCT_MF628			0x0015
 #define ZTE_PRODUCT_MF626			0x0031
 #define ZTE_PRODUCT_MC2718			0xffe8
+#define ZTE_PRODUCT_AC2726			0xfff1
 
 #define BENQ_VENDOR_ID				0x04a5
 #define BENQ_PRODUCT_H10			0x4068
@@ -1453,6 +1454,7 @@
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
 
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
 	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c
index fca4c75..eae2c87 100644
--- a/drivers/usb/serial/zte_ev.c
+++ b/drivers/usb/serial/zte_ev.c
@@ -281,8 +281,7 @@
 	{ USB_DEVICE(0x19d2, 0xfffd) },
 	{ USB_DEVICE(0x19d2, 0xfffc) },
 	{ USB_DEVICE(0x19d2, 0xfffb) },
-	/* AC2726, AC8710_V3 */
-	{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfff1, 0xff, 0xff, 0xff) },
+	/* AC8710_V3 */
 	{ USB_DEVICE(0x19d2, 0xfff6) },
 	{ USB_DEVICE(0x19d2, 0xfff7) },
 	{ USB_DEVICE(0x19d2, 0xfff8) },