| /* |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation. |
| * |
| * Copyright (C) 2010 John Crispin <blogic@openwrt.org> |
| */ |
| |
| #ifndef _LTQ_XWAY_H__ |
| #define _LTQ_XWAY_H__ |
| |
| #ifdef CONFIG_SOC_TYPE_XWAY |
| |
| #include <lantiq.h> |
| |
| /* Chip IDs */ |
| #define SOC_ID_DANUBE1 0x129 |
| #define SOC_ID_DANUBE2 0x12B |
| #define SOC_ID_TWINPASS 0x12D |
| #define SOC_ID_AMAZON_SE 0x152 |
| #define SOC_ID_ARX188 0x16C |
| #define SOC_ID_ARX168 0x16D |
| #define SOC_ID_ARX182 0x16F |
| |
| /* SoC Types */ |
| #define SOC_TYPE_DANUBE 0x01 |
| #define SOC_TYPE_TWINPASS 0x02 |
| #define SOC_TYPE_AR9 0x03 |
| #define SOC_TYPE_VR9 0x04 |
| #define SOC_TYPE_AMAZON_SE 0x05 |
| |
| /* ASC0/1 - serial port */ |
| #define LTQ_ASC0_BASE_ADDR 0x1E100400 |
| #define LTQ_ASC1_BASE_ADDR 0x1E100C00 |
| #define LTQ_ASC_SIZE 0x400 |
| |
| /* RCU - reset control unit */ |
| #define LTQ_RCU_BASE_ADDR 0x1F203000 |
| #define LTQ_RCU_SIZE 0x1000 |
| |
| /* GPTU - general purpose timer unit */ |
| #define LTQ_GPTU_BASE_ADDR 0x18000300 |
| #define LTQ_GPTU_SIZE 0x100 |
| |
| /* EBU - external bus unit */ |
| #define LTQ_EBU_GPIO_START 0x14000000 |
| #define LTQ_EBU_GPIO_SIZE 0x1000 |
| |
| #define LTQ_EBU_BASE_ADDR 0x1E105300 |
| #define LTQ_EBU_SIZE 0x100 |
| |
| #define LTQ_EBU_BUSCON0 0x0060 |
| #define LTQ_EBU_PCC_CON 0x0090 |
| #define LTQ_EBU_PCC_IEN 0x00A4 |
| #define LTQ_EBU_PCC_ISTAT 0x00A0 |
| #define LTQ_EBU_BUSCON1 0x0064 |
| #define LTQ_EBU_ADDRSEL1 0x0024 |
| #define EBU_WRDIS 0x80000000 |
| |
| /* CGU - clock generation unit */ |
| #define LTQ_CGU_BASE_ADDR 0x1F103000 |
| #define LTQ_CGU_SIZE 0x1000 |
| |
| /* ICU - interrupt control unit */ |
| #define LTQ_ICU_BASE_ADDR 0x1F880200 |
| #define LTQ_ICU_SIZE 0x100 |
| |
| /* EIU - external interrupt unit */ |
| #define LTQ_EIU_BASE_ADDR 0x1F101000 |
| #define LTQ_EIU_SIZE 0x1000 |
| |
| /* PMU - power management unit */ |
| #define LTQ_PMU_BASE_ADDR 0x1F102000 |
| #define LTQ_PMU_SIZE 0x1000 |
| |
| #define PMU_DMA 0x0020 |
| #define PMU_USB 0x8041 |
| #define PMU_LED 0x0800 |
| #define PMU_GPT 0x1000 |
| #define PMU_PPE 0x2000 |
| #define PMU_FPI 0x4000 |
| #define PMU_SWITCH 0x10000000 |
| |
| /* ETOP - ethernet */ |
| #define LTQ_ETOP_BASE_ADDR 0x1E180000 |
| #define LTQ_ETOP_SIZE 0x40000 |
| |
| /* DMA */ |
| #define LTQ_DMA_BASE_ADDR 0x1E104100 |
| #define LTQ_DMA_SIZE 0x800 |
| |
| /* PCI */ |
| #define PCI_CR_BASE_ADDR 0x1E105400 |
| #define PCI_CR_SIZE 0x400 |
| |
| /* WDT */ |
| #define LTQ_WDT_BASE_ADDR 0x1F8803F0 |
| #define LTQ_WDT_SIZE 0x10 |
| |
| /* STP - serial to parallel conversion unit */ |
| #define LTQ_STP_BASE_ADDR 0x1E100BB0 |
| #define LTQ_STP_SIZE 0x40 |
| |
| /* GPIO */ |
| #define LTQ_GPIO0_BASE_ADDR 0x1E100B10 |
| #define LTQ_GPIO1_BASE_ADDR 0x1E100B40 |
| #define LTQ_GPIO2_BASE_ADDR 0x1E100B70 |
| #define LTQ_GPIO_SIZE 0x30 |
| |
| /* SSC */ |
| #define LTQ_SSC_BASE_ADDR 0x1e100800 |
| #define LTQ_SSC_SIZE 0x100 |
| |
| /* MEI - dsl core */ |
| #define LTQ_MEI_BASE_ADDR 0x1E116000 |
| |
| /* DEU - data encryption unit */ |
| #define LTQ_DEU_BASE_ADDR 0x1E103100 |
| |
| /* MPS - multi processor unit (voice) */ |
| #define LTQ_MPS_BASE_ADDR (KSEG1 + 0x1F107000) |
| #define LTQ_MPS_CHIPID ((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344)) |
| |
| /* request a non-gpio and set the PIO config */ |
| extern int ltq_gpio_request(unsigned int pin, unsigned int alt0, |
| unsigned int alt1, unsigned int dir, const char *name); |
| extern void ltq_pmu_enable(unsigned int module); |
| extern void ltq_pmu_disable(unsigned int module); |
| |
| static inline int ltq_is_ar9(void) |
| { |
| return (ltq_get_soc_type() == SOC_TYPE_AR9); |
| } |
| |
| static inline int ltq_is_vr9(void) |
| { |
| return (ltq_get_soc_type() == SOC_TYPE_VR9); |
| } |
| |
| #endif /* CONFIG_SOC_TYPE_XWAY */ |
| #endif /* _LTQ_XWAY_H__ */ |
