dma-mapping: fix dma_addressing_limited() if dma_range_map can't cover all system RAM

There is an unusual case that the range map covers right up to the top
of system RAM, but leaves a hole somewhere lower down. Then it prevents
the nvme device dma mapping in the checking path of phys_to_dma() and
causes the hangs at boot.

E.g. On an Armv8 Ampere server, the dsdt ACPI table is:
 Method (_DMA, 0, Serialized)  // _DMA: Direct Memory Access
            {
                Name (RBUF, ResourceTemplate ()
                {
                    QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
                        0x0000000000000000, // Granularity
                        0x0000000000000000, // Range Minimum
                        0x00000000FFFFFFFF, // Range Maximum
                        0x0000000000000000, // Translation Offset
                        0x0000000100000000, // Length
                        ,, , AddressRangeMemory, TypeStatic)
                    QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
                        0x0000000000000000, // Granularity
                        0x0000006010200000, // Range Minimum
                        0x000000602FFFFFFF, // Range Maximum
                        0x0000000000000000, // Translation Offset
                        0x000000001FE00000, // Length
                        ,, , AddressRangeMemory, TypeStatic)
                    QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
                        0x0000000000000000, // Granularity
                        0x00000060F0000000, // Range Minimum
                        0x00000060FFFFFFFF, // Range Maximum
                        0x0000000000000000, // Translation Offset
                        0x0000000010000000, // Length
                        ,, , AddressRangeMemory, TypeStatic)
                    QWordMemory (ResourceConsumer, PosDecode, MinFixed,
MaxFixed, Cacheable, ReadWrite,
                        0x0000000000000000, // Granularity
                        0x0000007000000000, // Range Minimum
                        0x000003FFFFFFFFFF, // Range Maximum
                        0x0000000000000000, // Translation Offset
                        0x0000039000000000, // Length
                        ,, , AddressRangeMemory, TypeStatic)
                })

But the System RAM ranges are:
cat /proc/iomem |grep -i ram
90000000-91ffffff : System RAM
92900000-fffbffff : System RAM
880000000-fffffffff : System RAM
8800000000-bff5990fff : System RAM
bff59d0000-bff5a4ffff : System RAM
bff8000000-bfffffffff : System RAM
So some RAM ranges are out of dma_range_map.

Fix it by checking whether each of the system RAM resources can be
properly encompassed within the dma_range_map.

Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
3 files changed