blob: 2eeb209afc643d27184e3840977029dd2d233416 [file] [log] [blame]
/*
* Copyright 2006 Dave Airlie <airlied@linux.ie>
* Copyright © 2006-2007 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* Eric Anholt <eric@anholt.net>
*/
#include <linux/i2c.h>
#include <linux/slab.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc.h>
#include "i915_drv.h"
#include "intel_connector.h"
#include "intel_de.h"
#include "intel_display_types.h"
#include "intel_dvo.h"
#include "intel_dvo_dev.h"
#include "intel_gmbus.h"
#include "intel_panel.h"
#define INTEL_DVO_CHIP_NONE 0
#define INTEL_DVO_CHIP_LVDS 1
#define INTEL_DVO_CHIP_TMDS 2
#define INTEL_DVO_CHIP_TVOUT 4
#define INTEL_DVO_CHIP_LVDS_NO_FIXED 5
#define SIL164_ADDR 0x38
#define CH7xxx_ADDR 0x76
#define TFP410_ADDR 0x38
#define NS2501_ADDR 0x38
static const struct intel_dvo_device intel_dvo_devices[] = {
{
.type = INTEL_DVO_CHIP_TMDS,
.name = "sil164",
.dvo_reg = DVOC,
.dvo_srcdim_reg = DVOC_SRCDIM,
.slave_addr = SIL164_ADDR,
.dev_ops = &sil164_ops,
},
{
.type = INTEL_DVO_CHIP_TMDS,
.name = "ch7xxx",
.dvo_reg = DVOC,
.dvo_srcdim_reg = DVOC_SRCDIM,
.slave_addr = CH7xxx_ADDR,
.dev_ops = &ch7xxx_ops,
},
{
.type = INTEL_DVO_CHIP_TMDS,
.name = "ch7xxx",
.dvo_reg = DVOC,
.dvo_srcdim_reg = DVOC_SRCDIM,
.slave_addr = 0x75, /* For some ch7010 */
.dev_ops = &ch7xxx_ops,
},
{
.type = INTEL_DVO_CHIP_LVDS,
.name = "ivch",
.dvo_reg = DVOA,
.dvo_srcdim_reg = DVOA_SRCDIM,
.slave_addr = 0x02, /* Might also be 0x44, 0x84, 0xc4 */
.dev_ops = &ivch_ops,
},
{
.type = INTEL_DVO_CHIP_TMDS,
.name = "tfp410",
.dvo_reg = DVOC,
.dvo_srcdim_reg = DVOC_SRCDIM,
.slave_addr = TFP410_ADDR,
.dev_ops = &tfp410_ops,
},
{
.type = INTEL_DVO_CHIP_LVDS,
.name = "ch7017",
.dvo_reg = DVOC,
.dvo_srcdim_reg = DVOC_SRCDIM,
.slave_addr = 0x75,
.gpio = GMBUS_PIN_DPB,
.dev_ops = &ch7017_ops,
},
{
.type = INTEL_DVO_CHIP_LVDS_NO_FIXED,
.name = "ns2501",
.dvo_reg = DVOB,
.dvo_srcdim_reg = DVOB_SRCDIM,
.slave_addr = NS2501_ADDR,
.dev_ops = &ns2501_ops,
},
};
struct intel_dvo {
struct intel_encoder base;
struct intel_dvo_device dev;
struct intel_connector *attached_connector;
bool panel_wants_dither;
};
static struct intel_dvo *enc_to_dvo(struct intel_encoder *encoder)
{
return container_of(encoder, struct intel_dvo, base);
}
static struct intel_dvo *intel_attached_dvo(struct intel_connector *connector)
{
return enc_to_dvo(intel_attached_encoder(connector));
}
static bool intel_dvo_connector_get_hw_state(struct intel_connector *connector)
{
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
u32 tmp;
tmp = intel_de_read(dev_priv, intel_dvo->dev.dvo_reg);
if (!(tmp & DVO_ENABLE))
return false;
return intel_dvo->dev.dev_ops->get_hw_state(&intel_dvo->dev);
}
static bool intel_dvo_get_hw_state(struct intel_encoder *encoder,
enum pipe *pipe)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
u32 tmp;
tmp = intel_de_read(dev_priv, intel_dvo->dev.dvo_reg);
*pipe = (tmp & DVO_PIPE_SEL_MASK) >> DVO_PIPE_SEL_SHIFT;
return tmp & DVO_ENABLE;
}
static void intel_dvo_get_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
u32 tmp, flags = 0;
pipe_config->output_types |= BIT(INTEL_OUTPUT_DVO);
tmp = intel_de_read(dev_priv, intel_dvo->dev.dvo_reg);
if (tmp & DVO_HSYNC_ACTIVE_HIGH)
flags |= DRM_MODE_FLAG_PHSYNC;
else
flags |= DRM_MODE_FLAG_NHSYNC;
if (tmp & DVO_VSYNC_ACTIVE_HIGH)
flags |= DRM_MODE_FLAG_PVSYNC;
else
flags |= DRM_MODE_FLAG_NVSYNC;
pipe_config->hw.adjusted_mode.flags |= flags;
pipe_config->hw.adjusted_mode.crtc_clock = pipe_config->port_clock;
}
static void intel_disable_dvo(struct intel_atomic_state *state,
struct intel_encoder *encoder,
const struct intel_crtc_state *old_crtc_state,
const struct drm_connector_state *old_conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
i915_reg_t dvo_reg = intel_dvo->dev.dvo_reg;
u32 temp = intel_de_read(dev_priv, dvo_reg);
intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false);
intel_de_write(dev_priv, dvo_reg, temp & ~DVO_ENABLE);
intel_de_read(dev_priv, dvo_reg);
}
static void intel_enable_dvo(struct intel_atomic_state *state,
struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config,
const struct drm_connector_state *conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
i915_reg_t dvo_reg = intel_dvo->dev.dvo_reg;
u32 temp = intel_de_read(dev_priv, dvo_reg);
intel_dvo->dev.dev_ops->mode_set(&intel_dvo->dev,
&pipe_config->hw.mode,
&pipe_config->hw.adjusted_mode);
intel_de_write(dev_priv, dvo_reg, temp | DVO_ENABLE);
intel_de_read(dev_priv, dvo_reg);
intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);
}
static enum drm_mode_status
intel_dvo_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
struct intel_dvo *intel_dvo = intel_attached_dvo(intel_connector);
const struct drm_display_mode *fixed_mode =
intel_connector->panel.fixed_mode;
int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
int target_clock = mode->clock;
if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
return MODE_NO_DBLESCAN;
/* XXX: Validate clock range */
if (fixed_mode) {
enum drm_mode_status status;
status = intel_panel_mode_valid(intel_connector, mode);
if (status != MODE_OK)
return status;
target_clock = fixed_mode->clock;
}
if (target_clock > max_dotclk)
return MODE_CLOCK_HIGH;
return intel_dvo->dev.dev_ops->mode_valid(&intel_dvo->dev, mode);
}
static int intel_dvo_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config,
struct drm_connector_state *conn_state)
{
struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
struct intel_connector *connector = to_intel_connector(conn_state->connector);
const struct drm_display_mode *fixed_mode =
intel_dvo->attached_connector->panel.fixed_mode;
struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
/*
* If we have timings from the BIOS for the panel, put them in
* to the adjusted mode. The CRTC will be set up for this mode,
* with the panel scaling set up to source from the H/VDisplay
* of the original mode.
*/
if (fixed_mode) {
int ret;
ret = intel_panel_compute_config(connector, adjusted_mode);
if (ret)
return ret;
}
if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
return -EINVAL;
pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
return 0;
}
static void intel_dvo_pre_enable(struct intel_atomic_state *state,
struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config,
const struct drm_connector_state *conn_state)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
enum pipe pipe = crtc->pipe;
u32 dvo_val;
i915_reg_t dvo_reg = intel_dvo->dev.dvo_reg;
i915_reg_t dvo_srcdim_reg = intel_dvo->dev.dvo_srcdim_reg;
/* Save the data order, since I don't know what it should be set to. */
dvo_val = intel_de_read(dev_priv, dvo_reg) &
(DVO_PRESERVE_MASK | DVO_DATA_ORDER_GBRG);
dvo_val |= DVO_DATA_ORDER_FP | DVO_BORDER_ENABLE |
DVO_BLANK_ACTIVE_HIGH;
dvo_val |= DVO_PIPE_SEL(pipe);
dvo_val |= DVO_PIPE_STALL;
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
dvo_val |= DVO_HSYNC_ACTIVE_HIGH;
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
dvo_val |= DVO_VSYNC_ACTIVE_HIGH;
intel_de_write(dev_priv, dvo_srcdim_reg,
(adjusted_mode->crtc_hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) | (adjusted_mode->crtc_vdisplay << DVO_SRCDIM_VERTICAL_SHIFT));
intel_de_write(dev_priv, dvo_reg, dvo_val);
}
static enum drm_connector_status
intel_dvo_detect(struct drm_connector *connector, bool force)
{
struct drm_i915_private *i915 = to_i915(connector->dev);
struct intel_dvo *intel_dvo = intel_attached_dvo(to_intel_connector(connector));
DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
connector->base.id, connector->name);
if (!INTEL_DISPLAY_ENABLED(i915))
return connector_status_disconnected;
return intel_dvo->dev.dev_ops->detect(&intel_dvo->dev);
}
static int intel_dvo_get_modes(struct drm_connector *connector)
{
struct drm_i915_private *dev_priv = to_i915(connector->dev);
const struct drm_display_mode *fixed_mode =
to_intel_connector(connector)->panel.fixed_mode;
int num_modes;
/*
* We should probably have an i2c driver get_modes function for those
* devices which will have a fixed set of modes determined by the chip
* (TV-out, for example), but for now with just TMDS and LVDS,
* that's not the case.
*/
num_modes = intel_ddc_get_modes(connector,
intel_gmbus_get_adapter(dev_priv, GMBUS_PIN_DPC));
if (num_modes)
return num_modes;
if (fixed_mode) {
struct drm_display_mode *mode;
mode = drm_mode_duplicate(connector->dev, fixed_mode);
if (mode) {
drm_mode_probed_add(connector, mode);
num_modes++;
}
}
return num_modes;
}
static const struct drm_connector_funcs intel_dvo_connector_funcs = {
.detect = intel_dvo_detect,
.late_register = intel_connector_register,
.early_unregister = intel_connector_unregister,
.destroy = intel_connector_destroy,
.fill_modes = drm_helper_probe_single_connector_modes,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
};
static const struct drm_connector_helper_funcs intel_dvo_connector_helper_funcs = {
.mode_valid = intel_dvo_mode_valid,
.get_modes = intel_dvo_get_modes,
};
static void intel_dvo_enc_destroy(struct drm_encoder *encoder)
{
struct intel_dvo *intel_dvo = enc_to_dvo(to_intel_encoder(encoder));
if (intel_dvo->dev.dev_ops->destroy)
intel_dvo->dev.dev_ops->destroy(&intel_dvo->dev);
intel_encoder_destroy(encoder);
}
static const struct drm_encoder_funcs intel_dvo_enc_funcs = {
.destroy = intel_dvo_enc_destroy,
};
/*
* Attempts to get a fixed panel timing for LVDS (currently only the i830).
*
* Other chips with DVO LVDS will need to extend this to deal with the LVDS
* chip being on DVOB/C and having multiple pipes.
*/
static struct drm_display_mode *
intel_dvo_get_current_mode(struct intel_encoder *encoder)
{
struct drm_display_mode *mode;
mode = intel_encoder_current_mode(encoder);
if (mode) {
DRM_DEBUG_KMS("using current (BIOS) mode: ");
drm_mode_debug_printmodeline(mode);
mode->type |= DRM_MODE_TYPE_PREFERRED;
}
return mode;
}
static enum port intel_dvo_port(i915_reg_t dvo_reg)
{
if (i915_mmio_reg_equal(dvo_reg, DVOA))
return PORT_A;
else if (i915_mmio_reg_equal(dvo_reg, DVOB))
return PORT_B;
else
return PORT_C;
}
void intel_dvo_init(struct drm_i915_private *dev_priv)
{
struct intel_encoder *intel_encoder;
struct intel_dvo *intel_dvo;
struct intel_connector *intel_connector;
int i;
int encoder_type = DRM_MODE_ENCODER_NONE;
intel_dvo = kzalloc(sizeof(*intel_dvo), GFP_KERNEL);
if (!intel_dvo)
return;
intel_connector = intel_connector_alloc();
if (!intel_connector) {
kfree(intel_dvo);
return;
}
intel_dvo->attached_connector = intel_connector;
intel_encoder = &intel_dvo->base;
intel_encoder->disable = intel_disable_dvo;
intel_encoder->enable = intel_enable_dvo;
intel_encoder->get_hw_state = intel_dvo_get_hw_state;
intel_encoder->get_config = intel_dvo_get_config;
intel_encoder->compute_config = intel_dvo_compute_config;
intel_encoder->pre_enable = intel_dvo_pre_enable;
intel_connector->get_hw_state = intel_dvo_connector_get_hw_state;
/* Now, try to find a controller */
for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) {
struct drm_connector *connector = &intel_connector->base;
const struct intel_dvo_device *dvo = &intel_dvo_devices[i];
struct i2c_adapter *i2c;
int gpio;
bool dvoinit;
enum pipe pipe;
u32 dpll[I915_MAX_PIPES];
enum port port;
/*
* Allow the I2C driver info to specify the GPIO to be used in
* special cases, but otherwise default to what's defined
* in the spec.
*/
if (intel_gmbus_is_valid_pin(dev_priv, dvo->gpio))
gpio = dvo->gpio;
else if (dvo->type == INTEL_DVO_CHIP_LVDS)
gpio = GMBUS_PIN_SSC;
else
gpio = GMBUS_PIN_DPB;
/*
* Set up the I2C bus necessary for the chip we're probing.
* It appears that everything is on GPIOE except for panels
* on i830 laptops, which are on GPIOB (DVOA).
*/
i2c = intel_gmbus_get_adapter(dev_priv, gpio);
intel_dvo->dev = *dvo;
/*
* GMBUS NAK handling seems to be unstable, hence let the
* transmitter detection run in bit banging mode for now.
*/
intel_gmbus_force_bit(i2c, true);
/*
* ns2501 requires the DVO 2x clock before it will
* respond to i2c accesses, so make sure we have
* have the clock enabled before we attempt to
* initialize the device.
*/
for_each_pipe(dev_priv, pipe) {
dpll[pipe] = intel_de_read(dev_priv, DPLL(pipe));
intel_de_write(dev_priv, DPLL(pipe),
dpll[pipe] | DPLL_DVO_2X_MODE);
}
dvoinit = dvo->dev_ops->init(&intel_dvo->dev, i2c);
/* restore the DVO 2x clock state to original */
for_each_pipe(dev_priv, pipe) {
intel_de_write(dev_priv, DPLL(pipe), dpll[pipe]);
}
intel_gmbus_force_bit(i2c, false);
if (!dvoinit)
continue;
port = intel_dvo_port(dvo->dvo_reg);
drm_encoder_init(&dev_priv->drm, &intel_encoder->base,
&intel_dvo_enc_funcs, encoder_type,
"DVO %c", port_name(port));
intel_encoder->type = INTEL_OUTPUT_DVO;
intel_encoder->power_domain = POWER_DOMAIN_PORT_OTHER;
intel_encoder->port = port;
intel_encoder->pipe_mask = ~0;
if (dvo->type != INTEL_DVO_CHIP_LVDS)
intel_encoder->cloneable = (1 << INTEL_OUTPUT_ANALOG) |
(1 << INTEL_OUTPUT_DVO);
switch (dvo->type) {
case INTEL_DVO_CHIP_TMDS:
intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT |
DRM_CONNECTOR_POLL_DISCONNECT;
drm_connector_init(&dev_priv->drm, connector,
&intel_dvo_connector_funcs,
DRM_MODE_CONNECTOR_DVII);
encoder_type = DRM_MODE_ENCODER_TMDS;
break;
case INTEL_DVO_CHIP_LVDS_NO_FIXED:
case INTEL_DVO_CHIP_LVDS:
drm_connector_init(&dev_priv->drm, connector,
&intel_dvo_connector_funcs,
DRM_MODE_CONNECTOR_LVDS);
encoder_type = DRM_MODE_ENCODER_LVDS;
break;
}
drm_connector_helper_add(connector,
&intel_dvo_connector_helper_funcs);
connector->display_info.subpixel_order = SubPixelHorizontalRGB;
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
intel_connector_attach_encoder(intel_connector, intel_encoder);
if (dvo->type == INTEL_DVO_CHIP_LVDS) {
/*
* For our LVDS chipsets, we should hopefully be able
* to dig the fixed panel mode out of the BIOS data.
* However, it's in a different format from the BIOS
* data on chipsets with integrated LVDS (stored in AIM
* headers, likely), so for now, just get the current
* mode being output through DVO.
*/
intel_panel_init(&intel_connector->panel,
intel_dvo_get_current_mode(intel_encoder),
NULL);
intel_dvo->panel_wants_dither = true;
}
return;
}
kfree(intel_dvo);
kfree(intel_connector);
}