| .. SPDX-License-Identifier: GPL-2.0 |
| |
| Kernel driver xdp710 |
| ==================== |
| |
| Supported chips: |
| |
| * Infineon XDP710 |
| |
| Prefix: 'xdp710' |
| |
| * Datasheet |
| |
| Publicly available at the Infineon website : https://www.infineon.com/dgdl/Infineon-XDP710-001-DataSheet-v01_00-EN.pdf?fileId=8ac78c8c8412f8d301848a5316290b97 |
| |
| Author: |
| |
| Peter Yin <peteryin.openbmc@gmail.com> |
| |
| Description |
| ----------- |
| |
| This driver implements support for Infineon XDP710 Hot-Swap Controller. |
| |
| Device compliant with: |
| |
| - PMBus rev 1.3 interface. |
| |
| Device supports direct and linear format for reading input voltage, |
| output voltage, output current, input power and temperature. |
| |
| The driver exports the following attributes via the 'sysfs' files |
| for input voltage: |
| |
| **in1_input** |
| |
| **in1_label** |
| |
| **in1_max** |
| |
| **in1_max_alarm** |
| |
| **in1_min** |
| |
| **in1_min_alarm** |
| |
| The driver provides the following attributes for output voltage: |
| |
| **in2_input** |
| |
| **in2_label** |
| |
| **in2_alarm** |
| |
| The driver provides the following attributes for output current: |
| |
| **curr1_input** |
| |
| **curr1_label** |
| |
| **curr1_alarm** |
| |
| **curr1_max** |
| |
| The driver provides the following attributes for input power: |
| |
| **power1_input** |
| |
| **power1_label** |
| |
| **power1_alarm** |
| |
| The driver provides the following attributes for temperature: |
| |
| **temp1_input** |
| |
| **temp1_max** |
| |
| **temp1_max_alarm** |
| |
| **temp1_crit** |
| |
| **temp1_crit_alarm** |
