| // SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) |
| // Copyright(c) 2015-2020 Intel Corporation. |
| |
| /* |
| * Bandwidth management algorithm based on 2^n gears |
| * |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/device.h> |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/slab.h> |
| #include <linux/soundwire/sdw.h> |
| #include "bus.h" |
| |
| #define SDW_STRM_RATE_GROUPING 1 |
| |
| struct sdw_group_params { |
| unsigned int rate; |
| int full_bw; |
| int payload_bw; |
| int hwidth; |
| }; |
| |
| struct sdw_group { |
| unsigned int count; |
| unsigned int max_size; |
| unsigned int *rates; |
| }; |
| |
| void sdw_compute_slave_ports(struct sdw_master_runtime *m_rt, |
| struct sdw_transport_data *t_data) |
| { |
| struct sdw_slave_runtime *s_rt = NULL; |
| struct sdw_port_runtime *p_rt; |
| int port_bo, sample_int; |
| unsigned int rate, bps, ch = 0; |
| unsigned int slave_total_ch; |
| struct sdw_bus_params *b_params = &m_rt->bus->params; |
| |
| port_bo = t_data->block_offset; |
| |
| list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) { |
| rate = m_rt->stream->params.rate; |
| bps = m_rt->stream->params.bps; |
| sample_int = (m_rt->bus->params.curr_dr_freq / rate); |
| slave_total_ch = 0; |
| |
| list_for_each_entry(p_rt, &s_rt->port_list, port_node) { |
| ch = hweight32(p_rt->ch_mask); |
| |
| sdw_fill_xport_params(&p_rt->transport_params, |
| p_rt->num, false, |
| SDW_BLK_GRP_CNT_1, |
| sample_int, port_bo, port_bo >> 8, |
| t_data->hstart, |
| t_data->hstop, |
| SDW_BLK_PKG_PER_PORT, 0x0); |
| |
| sdw_fill_port_params(&p_rt->port_params, |
| p_rt->num, bps, |
| SDW_PORT_FLOW_MODE_ISOCH, |
| b_params->s_data_mode); |
| |
| port_bo += bps * ch; |
| slave_total_ch += ch; |
| } |
| |
| if (m_rt->direction == SDW_DATA_DIR_TX && |
| m_rt->ch_count == slave_total_ch) { |
| /* |
| * Slave devices were configured to access all channels |
| * of the stream, which indicates that they operate in |
| * 'mirror mode'. Make sure we reset the port offset for |
| * the next device in the list |
| */ |
| port_bo = t_data->block_offset; |
| } |
| } |
| } |
| EXPORT_SYMBOL(sdw_compute_slave_ports); |
| |
| static void sdw_compute_master_ports(struct sdw_master_runtime *m_rt, |
| struct sdw_group_params *params, |
| int *port_bo, int hstop) |
| { |
| struct sdw_transport_data t_data = {0}; |
| struct sdw_port_runtime *p_rt; |
| struct sdw_bus *bus = m_rt->bus; |
| struct sdw_bus_params *b_params = &bus->params; |
| int sample_int, hstart = 0; |
| unsigned int rate, bps, ch; |
| |
| rate = m_rt->stream->params.rate; |
| bps = m_rt->stream->params.bps; |
| ch = m_rt->ch_count; |
| sample_int = (bus->params.curr_dr_freq / rate); |
| |
| if (rate != params->rate) |
| return; |
| |
| t_data.hstop = hstop; |
| hstart = hstop - params->hwidth + 1; |
| t_data.hstart = hstart; |
| |
| list_for_each_entry(p_rt, &m_rt->port_list, port_node) { |
| |
| sdw_fill_xport_params(&p_rt->transport_params, p_rt->num, |
| false, SDW_BLK_GRP_CNT_1, sample_int, |
| *port_bo, (*port_bo) >> 8, hstart, hstop, |
| SDW_BLK_PKG_PER_PORT, 0x0); |
| |
| sdw_fill_port_params(&p_rt->port_params, |
| p_rt->num, bps, |
| SDW_PORT_FLOW_MODE_ISOCH, |
| b_params->m_data_mode); |
| |
| /* Check for first entry */ |
| if (!(p_rt == list_first_entry(&m_rt->port_list, |
| struct sdw_port_runtime, |
| port_node))) { |
| (*port_bo) += bps * ch; |
| continue; |
| } |
| |
| t_data.hstart = hstart; |
| t_data.hstop = hstop; |
| t_data.block_offset = *port_bo; |
| t_data.sub_block_offset = 0; |
| (*port_bo) += bps * ch; |
| } |
| |
| sdw_compute_slave_ports(m_rt, &t_data); |
| } |
| |
| static void _sdw_compute_port_params(struct sdw_bus *bus, |
| struct sdw_group_params *params, int count) |
| { |
| struct sdw_master_runtime *m_rt; |
| int hstop = bus->params.col - 1; |
| int port_bo, i; |
| |
| /* Run loop for all groups to compute transport parameters */ |
| for (i = 0; i < count; i++) { |
| port_bo = 1; |
| |
| list_for_each_entry(m_rt, &bus->m_rt_list, bus_node) { |
| sdw_compute_master_ports(m_rt, ¶ms[i], &port_bo, hstop); |
| } |
| |
| hstop = hstop - params[i].hwidth; |
| } |
| } |
| |
| static int sdw_compute_group_params(struct sdw_bus *bus, |
| struct sdw_group_params *params, |
| int *rates, int count) |
| { |
| struct sdw_master_runtime *m_rt; |
| int sel_col = bus->params.col; |
| unsigned int rate, bps, ch; |
| int i, column_needed = 0; |
| |
| /* Calculate bandwidth per group */ |
| for (i = 0; i < count; i++) { |
| params[i].rate = rates[i]; |
| params[i].full_bw = bus->params.curr_dr_freq / params[i].rate; |
| } |
| |
| list_for_each_entry(m_rt, &bus->m_rt_list, bus_node) { |
| rate = m_rt->stream->params.rate; |
| bps = m_rt->stream->params.bps; |
| ch = m_rt->ch_count; |
| |
| for (i = 0; i < count; i++) { |
| if (rate == params[i].rate) |
| params[i].payload_bw += bps * ch; |
| } |
| } |
| |
| for (i = 0; i < count; i++) { |
| params[i].hwidth = (sel_col * |
| params[i].payload_bw + params[i].full_bw - 1) / |
| params[i].full_bw; |
| |
| column_needed += params[i].hwidth; |
| } |
| |
| if (column_needed > sel_col - 1) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int sdw_add_element_group_count(struct sdw_group *group, |
| unsigned int rate) |
| { |
| int num = group->count; |
| int i; |
| |
| for (i = 0; i <= num; i++) { |
| if (rate == group->rates[i]) |
| break; |
| |
| if (i != num) |
| continue; |
| |
| if (group->count >= group->max_size) { |
| unsigned int *rates; |
| |
| group->max_size += 1; |
| rates = krealloc(group->rates, |
| (sizeof(int) * group->max_size), |
| GFP_KERNEL); |
| if (!rates) |
| return -ENOMEM; |
| group->rates = rates; |
| } |
| |
| group->rates[group->count++] = rate; |
| } |
| |
| return 0; |
| } |
| |
| static int sdw_get_group_count(struct sdw_bus *bus, |
| struct sdw_group *group) |
| { |
| struct sdw_master_runtime *m_rt; |
| unsigned int rate; |
| int ret = 0; |
| |
| group->count = 0; |
| group->max_size = SDW_STRM_RATE_GROUPING; |
| group->rates = kcalloc(group->max_size, sizeof(int), GFP_KERNEL); |
| if (!group->rates) |
| return -ENOMEM; |
| |
| list_for_each_entry(m_rt, &bus->m_rt_list, bus_node) { |
| rate = m_rt->stream->params.rate; |
| if (m_rt == list_first_entry(&bus->m_rt_list, |
| struct sdw_master_runtime, |
| bus_node)) { |
| group->rates[group->count++] = rate; |
| |
| } else { |
| ret = sdw_add_element_group_count(group, rate); |
| if (ret < 0) { |
| kfree(group->rates); |
| return ret; |
| } |
| } |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * sdw_compute_port_params: Compute transport and port parameters |
| * |
| * @bus: SDW Bus instance |
| */ |
| static int sdw_compute_port_params(struct sdw_bus *bus) |
| { |
| struct sdw_group_params *params = NULL; |
| struct sdw_group group; |
| int ret; |
| |
| ret = sdw_get_group_count(bus, &group); |
| if (ret < 0) |
| return ret; |
| |
| if (group.count == 0) |
| goto out; |
| |
| params = kcalloc(group.count, sizeof(*params), GFP_KERNEL); |
| if (!params) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| /* Compute transport parameters for grouped streams */ |
| ret = sdw_compute_group_params(bus, params, |
| &group.rates[0], group.count); |
| if (ret < 0) |
| goto free_params; |
| |
| _sdw_compute_port_params(bus, params, group.count); |
| |
| free_params: |
| kfree(params); |
| out: |
| kfree(group.rates); |
| |
| return ret; |
| } |
| |
| static int sdw_select_row_col(struct sdw_bus *bus, int clk_freq) |
| { |
| struct sdw_master_prop *prop = &bus->prop; |
| int frame_int, frame_freq; |
| int r, c; |
| |
| for (c = 0; c < SDW_FRAME_COLS; c++) { |
| for (r = 0; r < SDW_FRAME_ROWS; r++) { |
| if (sdw_rows[r] != prop->default_row || |
| sdw_cols[c] != prop->default_col) |
| continue; |
| |
| frame_int = sdw_rows[r] * sdw_cols[c]; |
| frame_freq = clk_freq / frame_int; |
| |
| if ((clk_freq - (frame_freq * SDW_FRAME_CTRL_BITS)) < |
| bus->params.bandwidth) |
| continue; |
| |
| bus->params.row = sdw_rows[r]; |
| bus->params.col = sdw_cols[c]; |
| return 0; |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| /** |
| * sdw_compute_bus_params: Compute bus parameters |
| * |
| * @bus: SDW Bus instance |
| */ |
| static int sdw_compute_bus_params(struct sdw_bus *bus) |
| { |
| unsigned int curr_dr_freq = 0; |
| struct sdw_master_prop *mstr_prop = &bus->prop; |
| int i, clk_values, ret; |
| bool is_gear = false; |
| u32 *clk_buf; |
| |
| if (mstr_prop->num_clk_gears) { |
| clk_values = mstr_prop->num_clk_gears; |
| clk_buf = mstr_prop->clk_gears; |
| is_gear = true; |
| } else if (mstr_prop->num_clk_freq) { |
| clk_values = mstr_prop->num_clk_freq; |
| clk_buf = mstr_prop->clk_freq; |
| } else { |
| clk_values = 1; |
| clk_buf = NULL; |
| } |
| |
| for (i = 0; i < clk_values; i++) { |
| if (!clk_buf) |
| curr_dr_freq = bus->params.max_dr_freq; |
| else |
| curr_dr_freq = (is_gear) ? |
| (bus->params.max_dr_freq >> clk_buf[i]) : |
| clk_buf[i] * SDW_DOUBLE_RATE_FACTOR; |
| |
| if (curr_dr_freq <= bus->params.bandwidth) |
| continue; |
| |
| break; |
| |
| /* |
| * TODO: Check all the Slave(s) port(s) audio modes and find |
| * whether given clock rate is supported with glitchless |
| * transition. |
| */ |
| } |
| |
| if (i == clk_values) { |
| dev_err(bus->dev, "%s: could not find clock value for bandwidth %d\n", |
| __func__, bus->params.bandwidth); |
| return -EINVAL; |
| } |
| |
| ret = sdw_select_row_col(bus, curr_dr_freq); |
| if (ret < 0) { |
| dev_err(bus->dev, "%s: could not find frame configuration for bus dr_freq %d\n", |
| __func__, curr_dr_freq); |
| return -EINVAL; |
| } |
| |
| bus->params.curr_dr_freq = curr_dr_freq; |
| return 0; |
| } |
| |
| /** |
| * sdw_compute_params: Compute bus, transport and port parameters |
| * |
| * @bus: SDW Bus instance |
| */ |
| int sdw_compute_params(struct sdw_bus *bus) |
| { |
| int ret; |
| |
| /* Computes clock frequency, frame shape and frame frequency */ |
| ret = sdw_compute_bus_params(bus); |
| if (ret < 0) |
| return ret; |
| |
| /* Compute transport and port params */ |
| ret = sdw_compute_port_params(bus); |
| if (ret < 0) { |
| dev_err(bus->dev, "Compute transport params failed: %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(sdw_compute_params); |
| |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_DESCRIPTION("SoundWire Generic Bandwidth Allocation"); |