diff --git a/include/media/i2c/adv7343.h b/include/media/i2c/adv7343.h
index e4142b1..b893703 100644
--- a/include/media/i2c/adv7343.h
+++ b/include/media/i2c/adv7343.h
@@ -21,7 +21,7 @@
 #define ADV7343_SVIDEO_ID	(2)
 
 /**
- * adv7343_power_mode - power mode configuration.
+ * struct adv7343_power_mode - power mode configuration.
  * @sleep_mode: on enable the current consumption is reduced to micro ampere
  *		level. All DACs and the internal PLL circuit are disabled.
  *		Registers can be read from and written in sleep mode.
diff --git a/include/media/i2c/mt9t112.h b/include/media/i2c/mt9t112.h
index cc80d5c..e678b6a 100644
--- a/include/media/i2c/mt9t112.h
+++ b/include/media/i2c/mt9t112.h
@@ -14,7 +14,7 @@ struct mt9t112_pll_divider {
 };
 
 /**
- * mt9t112_platform_data -	mt9t112 driver interface
+ * struct mt9t112_platform_data - mt9t112 driver interface
  * @flags:			Sensor media bus configuration.
  * @divider:			Sensor PLL configuration
  */
diff --git a/include/media/i2c/noon010pc30.h b/include/media/i2c/noon010pc30.h
index a035d2d..d1b2e06 100644
--- a/include/media/i2c/noon010pc30.h
+++ b/include/media/i2c/noon010pc30.h
@@ -10,6 +10,7 @@
 #define NOON010PC30_H
 
 /**
+ * struct noon010pc30_platform_data - platform data
  * @clk_rate: the clock frequency in Hz
  * @gpio_nreset: GPIO driving nRESET pin
  * @gpio_nstby: GPIO driving nSTBY pin
diff --git a/include/media/i2c/ov772x.h b/include/media/i2c/ov772x.h
index a1702d4..26f363e 100644
--- a/include/media/i2c/ov772x.h
+++ b/include/media/i2c/ov772x.h
@@ -46,7 +46,7 @@ struct ov772x_edge_ctrl {
 }
 
 /**
- * ov772x_camera_info -	ov772x driver interface structure
+ * struct ov772x_camera_info -	ov772x driver interface structure
  * @flags:		Sensor configuration flags
  * @edgectrl:		Sensor edge control
  */
diff --git a/include/media/i2c/s5c73m3.h b/include/media/i2c/s5c73m3.h
index ccb9e54..a51f102 100644
--- a/include/media/i2c/s5c73m3.h
+++ b/include/media/i2c/s5c73m3.h
@@ -35,6 +35,7 @@ struct s5c73m3_gpio {
  * @mclk_frequency: sensor's master clock frequency in Hz
  * @gpio_reset:  GPIO driving RESET pin
  * @gpio_stby:   GPIO driving STBY pin
+ * @bus_type:    bus type
  * @nlanes:      maximum number of MIPI-CSI lanes used
  * @horiz_flip:  default horizontal image flip value, non zero to enable
  * @vert_flip:   default vertical image flip value, non zero to enable
diff --git a/include/media/i2c/s5k4ecgx.h b/include/media/i2c/s5k4ecgx.h
index fccb7be..92202eb 100644
--- a/include/media/i2c/s5k4ecgx.h
+++ b/include/media/i2c/s5k4ecgx.h
@@ -11,7 +11,7 @@
 
 /**
  * struct s5k4ecgx_gpio - data structure describing a GPIO
- * @gpio : GPIO number
+ * @gpio: GPIO number
  * @level: indicates active state of the @gpio
  */
 struct s5k4ecgx_gpio {
@@ -20,9 +20,9 @@ struct s5k4ecgx_gpio {
 };
 
 /**
- * struct ss5k4ecgx_platform_data- s5k4ecgx driver platform data
+ * struct s5k4ecgx_platform_data - s5k4ecgx driver platform data
  * @gpio_reset:	 GPIO driving RESET pin
- * @gpio_stby :	 GPIO driving STBY pin
+ * @gpio_stby:	 GPIO driving STBY pin
  */
 
 struct s5k4ecgx_platform_data {
diff --git a/include/media/i2c/s5k6aa.h b/include/media/i2c/s5k6aa.h
index fd78e85..eb3444d8 100644
--- a/include/media/i2c/s5k6aa.h
+++ b/include/media/i2c/s5k6aa.h
@@ -28,6 +28,7 @@ struct s5k6aa_gpio {
  * @mclk_frequency: sensor's master clock frequency in Hz
  * @gpio_reset:  GPIO driving RESET pin
  * @gpio_stby:   GPIO driving STBY pin
+ * @bus_type:    bus type
  * @nlanes:      maximum number of MIPI-CSI lanes used
  * @horiz_flip:  default horizontal image flip value, non zero to enable
  * @vert_flip:   default vertical image flip value, non zero to enable
diff --git a/include/media/i2c/tvp514x.h b/include/media/i2c/tvp514x.h
index 0c1bb04..837efff 100644
--- a/include/media/i2c/tvp514x.h
+++ b/include/media/i2c/tvp514x.h
@@ -29,10 +29,7 @@
 #define PAL_NUM_ACTIVE_PIXELS		(720)
 #define PAL_NUM_ACTIVE_LINES		(576)
 
-/**
- * enum tvp514x_input - enum for different decoder input pin
- *		configuration.
- */
+/* enum for different decoder input pin configuration */
 enum tvp514x_input {
 	/*
 	 * CVBS input selection
@@ -69,11 +66,7 @@ enum tvp514x_input {
 	INPUT_INVALID
 };
 
-/**
- * enum tvp514x_output - enum for output format
- *			supported.
- *
- */
+/* enum for output format supported. */
 enum tvp514x_output {
 	OUTPUT_10BIT_422_EMBEDDED_SYNC = 0,
 	OUTPUT_20BIT_422_SEPERATE_SYNC,
diff --git a/include/media/i2c/tw9910.h b/include/media/i2c/tw9910.h
index 92d31bd..77da94f 100644
--- a/include/media/i2c/tw9910.h
+++ b/include/media/i2c/tw9910.h
@@ -13,9 +13,7 @@
 #ifndef __TW9910_H__
 #define __TW9910_H__
 
-/**
- * tw9910_mpout_pin - MPOUT (multi-purpose output) pin functions
- */
+/* MPOUT (multi-purpose output) pin functions */
 enum tw9910_mpout_pin {
 	TW9910_MPO_VLOSS,
 	TW9910_MPO_HLOCK,
@@ -28,10 +26,10 @@ enum tw9910_mpout_pin {
 };
 
 /**
- * tw9910_video_info -	tw9910 driver interface structure
+ * struct tw9910_video_info - tw9910 driver interface structure
  * @buswidth:		Parallel data bus width (8 or 16).
  * @mpout:		Selected function of MPOUT (multi-purpose output) pin.
- *			See &enum tw9910_mpout_pin
+ *			See enum tw9910_mpout_pin
  */
 struct tw9910_video_info {
 	unsigned long		buswidth;