Merge tag 'omap-for-v4.19/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omap variants against v4.19-rc1
These are mostly fixes related to using ti-sysc interconnect target module
driver for accessing right register offsets for sgx and cpsw and for
no_console_suspend regression.
There is also a droid4 emmc fix where emmc may not get detected for some
models, and vibrator dts mismerge fix.
And we have a file permission fix for am335x-osd3358-sm-red.dts that
just got added. And we must tag RTC as system-power-controller for
am437x for PMIC to shut down during poweroff.
* tag 'omap-for-v4.19/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap4-droid4: Fix emmc errors seen on some devices
ARM: dts: Fix file permission for am335x-osd3358-sm-red.dts
arm: dts: am4372: setup rtc as system-power-controller
ARM: dts: omap4-droid4: fix vibrations on Droid 4
bus: ti-sysc: Fix no_console_suspend handling
bus: ti-sysc: Fix module register ioremap for larger offsets
ARM: OMAP2+: Fix module address for modules using mpu_rt_idx
ARM: OMAP2+: Fix null hwmod for ti-sysc debug
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
old mode 100755
new mode 100644
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index f0cbd86..d4b7c59 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -469,6 +469,7 @@
ti,hwmods = "rtc";
clocks = <&clk_32768_ck>;
clock-names = "int-clk";
+ system-power-controller;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index 12d6822..04758a2 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -354,7 +354,7 @@
&mmc2 {
vmmc-supply = <&vsdio>;
bus-width = <8>;
- non-removable;
+ ti,non-removable;
};
&mmc3 {
@@ -621,15 +621,6 @@
OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */
>;
};
-};
-
-&omap4_pmx_wkup {
- usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
- /* gpio_wk0 */
- pinctrl-single,pins = <
- OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
- >;
- };
vibrator_direction_pin: pinmux_vibrator_direction_pin {
pinctrl-single,pins = <
@@ -644,6 +635,15 @@
};
};
+&omap4_pmx_wkup {
+ usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
+ /* gpio_wk0 */
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
+ >;
+ };
+};
+
/*
* As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for
* uart1 wakeirq.
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 2ceffd8..cd65ea4 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2161,6 +2161,37 @@ static int of_dev_hwmod_lookup(struct device_node *np,
}
/**
+ * omap_hwmod_fix_mpu_rt_idx - fix up mpu_rt_idx register offsets
+ *
+ * @oh: struct omap_hwmod *
+ * @np: struct device_node *
+ *
+ * Fix up module register offsets for modules with mpu_rt_idx.
+ * Only needed for cpsw with interconnect target module defined
+ * in device tree while still using legacy hwmod platform data
+ * for rev, sysc and syss registers.
+ *
+ * Can be removed when all cpsw hwmod platform data has been
+ * dropped.
+ */
+static void omap_hwmod_fix_mpu_rt_idx(struct omap_hwmod *oh,
+ struct device_node *np,
+ struct resource *res)
+{
+ struct device_node *child = NULL;
+ int error;
+
+ child = of_get_next_child(np, child);
+ if (!child)
+ return;
+
+ error = of_address_to_resource(child, oh->mpu_rt_idx, res);
+ if (error)
+ pr_err("%s: error mapping mpu_rt_idx: %i\n",
+ __func__, error);
+}
+
+/**
* omap_hwmod_parse_module_range - map module IO range from device tree
* @oh: struct omap_hwmod *
* @np: struct device_node *
@@ -2220,7 +2251,13 @@ int omap_hwmod_parse_module_range(struct omap_hwmod *oh,
size = be32_to_cpup(ranges);
pr_debug("omap_hwmod: %s %s at 0x%llx size 0x%llx\n",
- oh->name, np->name, base, size);
+ oh ? oh->name : "", np->name, base, size);
+
+ if (oh && oh->mpu_rt_idx) {
+ omap_hwmod_fix_mpu_rt_idx(oh, np, res);
+
+ return 0;
+ }
res->start = base;
res->end = base + size - 1;
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index c9bac9d..e4fe954 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -498,32 +498,29 @@ static int sysc_check_registers(struct sysc *ddata)
/**
* syc_ioremap - ioremap register space for the interconnect target module
- * @ddata: deviec driver data
+ * @ddata: device driver data
*
* Note that the interconnect target module registers can be anywhere
- * within the first child device address space. For example, SGX has
- * them at offset 0x1fc00 in the 32MB module address space. We just
- * what we need around the interconnect target module registers.
+ * within the interconnect target module range. For example, SGX has
+ * them at offset 0x1fc00 in the 32MB module address space. And cpsw
+ * has them at offset 0x1200 in the CPSW_WR child. Usually the
+ * the interconnect target module registers are at the beginning of
+ * the module range though.
*/
static int sysc_ioremap(struct sysc *ddata)
{
- u32 size = 0;
+ int size;
- if (ddata->offsets[SYSC_SYSSTATUS] >= 0)
- size = ddata->offsets[SYSC_SYSSTATUS];
- else if (ddata->offsets[SYSC_SYSCONFIG] >= 0)
- size = ddata->offsets[SYSC_SYSCONFIG];
- else if (ddata->offsets[SYSC_REVISION] >= 0)
- size = ddata->offsets[SYSC_REVISION];
- else
+ size = max3(ddata->offsets[SYSC_REVISION],
+ ddata->offsets[SYSC_SYSCONFIG],
+ ddata->offsets[SYSC_SYSSTATUS]);
+
+ if (size < 0 || (size + sizeof(u32)) > ddata->module_size)
return -EINVAL;
- size &= 0xfff00;
- size += SZ_256;
-
ddata->module_va = devm_ioremap(ddata->dev,
ddata->module_pa,
- size);
+ size + sizeof(u32));
if (!ddata->module_va)
return -EIO;
@@ -1224,10 +1221,10 @@ static int sysc_child_suspend_noirq(struct device *dev)
if (!pm_runtime_status_suspended(dev)) {
error = pm_generic_runtime_suspend(dev);
if (error) {
- dev_err(dev, "%s error at %i: %i\n",
- __func__, __LINE__, error);
+ dev_warn(dev, "%s busy at %i: %i\n",
+ __func__, __LINE__, error);
- return error;
+ return 0;
}
error = sysc_runtime_suspend(ddata->dev);
