| .. SPDX-License-Identifier: GPL-2.0 |
| |
| ========================== |
| Fprobe-based Event Tracing |
| ========================== |
| |
| .. Author: Masami Hiramatsu <mhiramat@kernel.org> |
| |
| Overview |
| -------- |
| |
| Fprobe event is similar to the kprobe event, but limited to probe on |
| the function entry and exit only. It is good enough for many use cases |
| which only traces some specific functions. |
| |
| This document also covers tracepoint probe events (tprobe) since this |
| is also works only on the tracepoint entry. User can trace a part of |
| tracepoint argument, or the tracepoint without trace-event, which is |
| not exposed on tracefs. |
| |
| As same as other dynamic events, fprobe events and tracepoint probe |
| events are defined via `dynamic_events` interface file on tracefs. |
| |
| Synopsis of fprobe-events |
| ------------------------- |
| :: |
| |
| f[:[GRP1/][EVENT1]] SYM [FETCHARGS] : Probe on function entry |
| f[MAXACTIVE][:[GRP1/][EVENT1]] SYM%return [FETCHARGS] : Probe on function exit |
| t[:[GRP2/][EVENT2]] TRACEPOINT [FETCHARGS] : Probe on tracepoint |
| |
| GRP1 : Group name for fprobe. If omitted, use "fprobes" for it. |
| GRP2 : Group name for tprobe. If omitted, use "tracepoints" for it. |
| EVENT1 : Event name for fprobe. If omitted, the event name is |
| "SYM__entry" or "SYM__exit". |
| EVENT2 : Event name for tprobe. If omitted, the event name is |
| the same as "TRACEPOINT", but if the "TRACEPOINT" starts |
| with a digit character, "_TRACEPOINT" is used. |
| MAXACTIVE : Maximum number of instances of the specified function that |
| can be probed simultaneously, or 0 for the default value |
| as defined in Documentation/trace/fprobe.rst |
| |
| FETCHARGS : Arguments. Each probe can have up to 128 args. |
| ARG : Fetch "ARG" function argument using BTF (only for function |
| entry or tracepoint.) (\*1) |
| @ADDR : Fetch memory at ADDR (ADDR should be in kernel) |
| @SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol) |
| $stackN : Fetch Nth entry of stack (N >= 0) |
| $stack : Fetch stack address. |
| $argN : Fetch the Nth function argument. (N >= 1) (\*2) |
| $retval : Fetch return value.(\*3) |
| $comm : Fetch current task comm. |
| +|-[u]OFFS(FETCHARG) : Fetch memory at FETCHARG +|- OFFS address.(\*4)(\*5) |
| \IMM : Store an immediate value to the argument. |
| NAME=FETCHARG : Set NAME as the argument name of FETCHARG. |
| FETCHARG:TYPE : Set TYPE as the type of FETCHARG. Currently, basic types |
| (u8/u16/u32/u64/s8/s16/s32/s64), hexadecimal types |
| (x8/x16/x32/x64), "char", "string", "ustring", "symbol", "symstr" |
| and bitfield are supported. |
| |
| (\*1) This is available only when BTF is enabled. |
| (\*2) only for the probe on function entry (offs == 0). |
| (\*3) only for return probe. |
| (\*4) this is useful for fetching a field of data structures. |
| (\*5) "u" means user-space dereference. |
| |
| For the details of TYPE, see :ref:`kprobetrace documentation <kprobetrace_types>`. |
| |
| BTF arguments |
| ------------- |
| BTF (BPF Type Format) argument allows user to trace function and tracepoint |
| parameters by its name instead of ``$argN``. This feature is available if the |
| kernel is configured with CONFIG_BPF_SYSCALL and CONFIG_DEBUG_INFO_BTF. |
| If user only specify the BTF argument, the event's argument name is also |
| automatically set by the given name. :: |
| |
| # echo 'f:myprobe vfs_read count pos' >> dynamic_events |
| # cat dynamic_events |
| f:fprobes/myprobe vfs_read count=count pos=pos |
| |
| It also chooses the fetch type from BTF information. For example, in the above |
| example, the ``count`` is unsigned long, and the ``pos`` is a pointer. Thus, |
| both are converted to 64bit unsigned long, but only ``pos`` has "%Lx" |
| print-format as below :: |
| |
| # cat events/fprobes/myprobe/format |
| name: myprobe |
| ID: 1313 |
| format: |
| field:unsigned short common_type; offset:0; size:2; signed:0; |
| field:unsigned char common_flags; offset:2; size:1; signed:0; |
| field:unsigned char common_preempt_count; offset:3; size:1; signed:0; |
| field:int common_pid; offset:4; size:4; signed:1; |
| |
| field:unsigned long __probe_ip; offset:8; size:8; signed:0; |
| field:u64 count; offset:16; size:8; signed:0; |
| field:u64 pos; offset:24; size:8; signed:0; |
| |
| print fmt: "(%lx) count=%Lu pos=0x%Lx", REC->__probe_ip, REC->count, REC->pos |
| |
| If user unsures the name of arguments, ``$arg*`` will be helpful. The ``$arg*`` |
| is expanded to all function arguments of the function or the tracepoint. :: |
| |
| # echo 'f:myprobe vfs_read $arg*' >> dynamic_events |
| # cat dynamic_events |
| f:fprobes/myprobe vfs_read file=file buf=buf count=count pos=pos |
| |
| BTF also affects the ``$retval``. If user doesn't set any type, the retval |
| type is automatically picked from the BTF. If the function returns ``void``, |
| ``$retval`` is rejected. |
| |
| You can access the data fields of a data structure using allow operator ``->`` |
| (for pointer type) and dot operator ``.`` (for data structure type.):: |
| |
| # echo 't sched_switch preempt prev_pid=prev->pid next_pid=next->pid' >> dynamic_events |
| |
| The field access operators, ``->`` and ``.`` can be combined for accessing deeper |
| members and other structure members pointed by the member. e.g. ``foo->bar.baz->qux`` |
| If there is non-name union member, you can directly access it as the C code does. |
| For example:: |
| |
| struct { |
| union { |
| int a; |
| int b; |
| }; |
| } *foo; |
| |
| To access ``a`` and ``b``, use ``foo->a`` and ``foo->b`` in this case. |
| |
| This data field access is available for the return value via ``$retval``, |
| e.g. ``$retval->name``. |
| |
| For these BTF arguments and fields, ``:string`` and ``:ustring`` change the |
| behavior. If these are used for BTF argument or field, it checks whether |
| the BTF type of the argument or the data field is ``char *`` or ``char []``, |
| or not. If not, it rejects applying the string types. Also, with the BTF |
| support, you don't need a memory dereference operator (``+0(PTR)``) for |
| accessing the string pointed by a ``PTR``. It automatically adds the memory |
| dereference operator according to the BTF type. e.g. :: |
| |
| # echo 't sched_switch prev->comm:string' >> dynamic_events |
| # echo 'f getname_flags%return $retval->name:string' >> dynamic_events |
| |
| The ``prev->comm`` is an embedded char array in the data structure, and |
| ``$retval->name`` is a char pointer in the data structure. But in both |
| cases, you can use ``:string`` type to get the string. |
| |
| |
| Usage examples |
| -------------- |
| Here is an example to add fprobe events on ``vfs_read()`` function entry |
| and exit, with BTF arguments. |
| :: |
| |
| # echo 'f vfs_read $arg*' >> dynamic_events |
| # echo 'f vfs_read%return $retval' >> dynamic_events |
| # cat dynamic_events |
| f:fprobes/vfs_read__entry vfs_read file=file buf=buf count=count pos=pos |
| f:fprobes/vfs_read__exit vfs_read%return arg1=$retval |
| # echo 1 > events/fprobes/enable |
| # head -n 20 trace | tail |
| # TASK-PID CPU# ||||| TIMESTAMP FUNCTION |
| # | | | ||||| | | |
| sh-70 [000] ...1. 335.883195: vfs_read__entry: (vfs_read+0x4/0x340) file=0xffff888005cf9a80 buf=0x7ffef36c6879 count=1 pos=0xffffc900005aff08 |
| sh-70 [000] ..... 335.883208: vfs_read__exit: (ksys_read+0x75/0x100 <- vfs_read) arg1=1 |
| sh-70 [000] ...1. 335.883220: vfs_read__entry: (vfs_read+0x4/0x340) file=0xffff888005cf9a80 buf=0x7ffef36c6879 count=1 pos=0xffffc900005aff08 |
| sh-70 [000] ..... 335.883224: vfs_read__exit: (ksys_read+0x75/0x100 <- vfs_read) arg1=1 |
| sh-70 [000] ...1. 335.883232: vfs_read__entry: (vfs_read+0x4/0x340) file=0xffff888005cf9a80 buf=0x7ffef36c687a count=1 pos=0xffffc900005aff08 |
| sh-70 [000] ..... 335.883237: vfs_read__exit: (ksys_read+0x75/0x100 <- vfs_read) arg1=1 |
| sh-70 [000] ...1. 336.050329: vfs_read__entry: (vfs_read+0x4/0x340) file=0xffff888005cf9a80 buf=0x7ffef36c6879 count=1 pos=0xffffc900005aff08 |
| sh-70 [000] ..... 336.050343: vfs_read__exit: (ksys_read+0x75/0x100 <- vfs_read) arg1=1 |
| |
| You can see all function arguments and return values are recorded as signed int. |
| |
| Also, here is an example of tracepoint events on ``sched_switch`` tracepoint. |
| To compare the result, this also enables the ``sched_switch`` traceevent too. |
| :: |
| |
| # echo 't sched_switch $arg*' >> dynamic_events |
| # echo 1 > events/sched/sched_switch/enable |
| # echo 1 > events/tracepoints/sched_switch/enable |
| # echo > trace |
| # head -n 20 trace | tail |
| # TASK-PID CPU# ||||| TIMESTAMP FUNCTION |
| # | | | ||||| | | |
| sh-70 [000] d..2. 3912.083993: sched_switch: prev_comm=sh prev_pid=70 prev_prio=120 prev_state=S ==> next_comm=swapper/0 next_pid=0 next_prio=120 |
| sh-70 [000] d..3. 3912.083995: sched_switch: (__probestub_sched_switch+0x4/0x10) preempt=0 prev=0xffff88800664e100 next=0xffffffff828229c0 prev_state=1 |
| <idle>-0 [000] d..2. 3912.084183: sched_switch: prev_comm=swapper/0 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=rcu_preempt next_pid=16 next_prio=120 |
| <idle>-0 [000] d..3. 3912.084184: sched_switch: (__probestub_sched_switch+0x4/0x10) preempt=0 prev=0xffffffff828229c0 next=0xffff888004208000 prev_state=0 |
| rcu_preempt-16 [000] d..2. 3912.084196: sched_switch: prev_comm=rcu_preempt prev_pid=16 prev_prio=120 prev_state=I ==> next_comm=swapper/0 next_pid=0 next_prio=120 |
| rcu_preempt-16 [000] d..3. 3912.084196: sched_switch: (__probestub_sched_switch+0x4/0x10) preempt=0 prev=0xffff888004208000 next=0xffffffff828229c0 prev_state=1026 |
| <idle>-0 [000] d..2. 3912.085191: sched_switch: prev_comm=swapper/0 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=rcu_preempt next_pid=16 next_prio=120 |
| <idle>-0 [000] d..3. 3912.085191: sched_switch: (__probestub_sched_switch+0x4/0x10) preempt=0 prev=0xffffffff828229c0 next=0xffff888004208000 prev_state=0 |
| |
| As you can see, the ``sched_switch`` trace-event shows *cooked* parameters, on |
| the other hand, the ``sched_switch`` tracepoint probe event shows *raw* |
| parameters. This means you can access any field values in the task |
| structure pointed by the ``prev`` and ``next`` arguments. |
| |
| For example, usually ``task_struct::start_time`` is not traced, but with this |
| traceprobe event, you can trace that field as below. |
| :: |
| |
| # echo 't sched_switch comm=next->comm:string next->start_time' > dynamic_events |
| # head -n 20 trace | tail |
| # TASK-PID CPU# ||||| TIMESTAMP FUNCTION |
| # | | | ||||| | | |
| sh-70 [000] d..3. 5606.686577: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="rcu_preempt" usage=1 start_time=245000000 |
| rcu_preempt-16 [000] d..3. 5606.686602: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="sh" usage=1 start_time=1596095526 |
| sh-70 [000] d..3. 5606.686637: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="swapper/0" usage=2 start_time=0 |
| <idle>-0 [000] d..3. 5606.687190: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="rcu_preempt" usage=1 start_time=245000000 |
| rcu_preempt-16 [000] d..3. 5606.687202: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="swapper/0" usage=2 start_time=0 |
| <idle>-0 [000] d..3. 5606.690317: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="kworker/0:1" usage=1 start_time=137000000 |
| kworker/0:1-14 [000] d..3. 5606.690339: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="swapper/0" usage=2 start_time=0 |
| <idle>-0 [000] d..3. 5606.692368: sched_switch: (__probestub_sched_switch+0x4/0x10) comm="kworker/0:1" usage=1 start_time=137000000 |
