| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * u_ether.c -- Ethernet-over-USB link layer utilities for Gadget stack |
| * |
| * Copyright (C) 2003-2005,2008 David Brownell |
| * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger |
| * Copyright (C) 2008 Nokia Corporation |
| */ |
| |
| /* #define VERBOSE_DEBUG */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/gfp.h> |
| #include <linux/device.h> |
| #include <linux/ctype.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/if_vlan.h> |
| #include <linux/string_helpers.h> |
| #include <linux/usb/composite.h> |
| |
| #include "u_ether.h" |
| |
| |
| /* |
| * This component encapsulates the Ethernet link glue needed to provide |
| * one (!) network link through the USB gadget stack, normally "usb0". |
| * |
| * The control and data models are handled by the function driver which |
| * connects to this code; such as CDC Ethernet (ECM or EEM), |
| * "CDC Subset", or RNDIS. That includes all descriptor and endpoint |
| * management. |
| * |
| * Link level addressing is handled by this component using module |
| * parameters; if no such parameters are provided, random link level |
| * addresses are used. Each end of the link uses one address. The |
| * host end address is exported in various ways, and is often recorded |
| * in configuration databases. |
| * |
| * The driver which assembles each configuration using such a link is |
| * responsible for ensuring that each configuration includes at most one |
| * instance of is network link. (The network layer provides ways for |
| * this single "physical" link to be used by multiple virtual links.) |
| */ |
| |
| #define UETH__VERSION "29-May-2008" |
| |
| /* Experiments show that both Linux and Windows hosts allow up to 16k |
| * frame sizes. Set the max MTU size to 15k+52 to prevent allocating 32k |
| * blocks and still have efficient handling. */ |
| #define GETHER_MAX_MTU_SIZE 15412 |
| #define GETHER_MAX_ETH_FRAME_LEN (GETHER_MAX_MTU_SIZE + ETH_HLEN) |
| |
| struct eth_dev { |
| /* lock is held while accessing port_usb |
| */ |
| spinlock_t lock; |
| struct gether *port_usb; |
| |
| struct net_device *net; |
| struct usb_gadget *gadget; |
| |
| spinlock_t req_lock; /* guard {rx,tx}_reqs */ |
| struct list_head tx_reqs, rx_reqs; |
| atomic_t tx_qlen; |
| |
| struct sk_buff_head rx_frames; |
| |
| unsigned qmult; |
| |
| unsigned header_len; |
| struct sk_buff *(*wrap)(struct gether *, struct sk_buff *skb); |
| int (*unwrap)(struct gether *, |
| struct sk_buff *skb, |
| struct sk_buff_head *list); |
| |
| struct work_struct work; |
| |
| unsigned long todo; |
| #define WORK_RX_MEMORY 0 |
| |
| bool zlp; |
| bool no_skb_reserve; |
| bool ifname_set; |
| u8 host_mac[ETH_ALEN]; |
| u8 dev_mac[ETH_ALEN]; |
| }; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| #define RX_EXTRA 20 /* bytes guarding against rx overflows */ |
| |
| #define DEFAULT_QLEN 2 /* double buffering by default */ |
| |
| /* use deeper queues at high/super speed */ |
| static inline int qlen(struct usb_gadget *gadget, unsigned qmult) |
| { |
| if (gadget->speed == USB_SPEED_HIGH || gadget->speed >= USB_SPEED_SUPER) |
| return qmult * DEFAULT_QLEN; |
| else |
| return DEFAULT_QLEN; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* NETWORK DRIVER HOOKUP (to the layer above this driver) */ |
| |
| static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p) |
| { |
| struct eth_dev *dev = netdev_priv(net); |
| |
| strscpy(p->driver, "g_ether", sizeof(p->driver)); |
| strscpy(p->version, UETH__VERSION, sizeof(p->version)); |
| strscpy(p->fw_version, dev->gadget->name, sizeof(p->fw_version)); |
| strscpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof(p->bus_info)); |
| } |
| |
| /* REVISIT can also support: |
| * - WOL (by tracking suspends and issuing remote wakeup) |
| * - msglevel (implies updated messaging) |
| * - ... probably more ethtool ops |
| */ |
| |
| static const struct ethtool_ops ops = { |
| .get_drvinfo = eth_get_drvinfo, |
| .get_link = ethtool_op_get_link, |
| }; |
| |
| static void defer_kevent(struct eth_dev *dev, int flag) |
| { |
| if (test_and_set_bit(flag, &dev->todo)) |
| return; |
| if (!schedule_work(&dev->work)) |
| ERROR(dev, "kevent %d may have been dropped\n", flag); |
| else |
| DBG(dev, "kevent %d scheduled\n", flag); |
| } |
| |
| static void rx_complete(struct usb_ep *ep, struct usb_request *req); |
| |
| static int |
| rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags) |
| { |
| struct usb_gadget *g = dev->gadget; |
| struct sk_buff *skb; |
| int retval = -ENOMEM; |
| size_t size = 0; |
| struct usb_ep *out; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| if (dev->port_usb) |
| out = dev->port_usb->out_ep; |
| else |
| out = NULL; |
| |
| if (!out) |
| { |
| spin_unlock_irqrestore(&dev->lock, flags); |
| return -ENOTCONN; |
| } |
| |
| /* Padding up to RX_EXTRA handles minor disagreements with host. |
| * Normally we use the USB "terminate on short read" convention; |
| * so allow up to (N*maxpacket), since that memory is normally |
| * already allocated. Some hardware doesn't deal well with short |
| * reads (e.g. DMA must be N*maxpacket), so for now don't trim a |
| * byte off the end (to force hardware errors on overflow). |
| * |
| * RNDIS uses internal framing, and explicitly allows senders to |
| * pad to end-of-packet. That's potentially nice for speed, but |
| * means receivers can't recover lost synch on their own (because |
| * new packets don't only start after a short RX). |
| */ |
| size += sizeof(struct ethhdr) + dev->net->mtu + RX_EXTRA; |
| size += dev->port_usb->header_len; |
| |
| if (g->quirk_ep_out_aligned_size) { |
| size += out->maxpacket - 1; |
| size -= size % out->maxpacket; |
| } |
| |
| if (dev->port_usb->is_fixed) |
| size = max_t(size_t, size, dev->port_usb->fixed_out_len); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| skb = __netdev_alloc_skb(dev->net, size + NET_IP_ALIGN, gfp_flags); |
| if (skb == NULL) { |
| DBG(dev, "no rx skb\n"); |
| goto enomem; |
| } |
| |
| /* Some platforms perform better when IP packets are aligned, |
| * but on at least one, checksumming fails otherwise. Note: |
| * RNDIS headers involve variable numbers of LE32 values. |
| */ |
| if (likely(!dev->no_skb_reserve)) |
| skb_reserve(skb, NET_IP_ALIGN); |
| |
| req->buf = skb->data; |
| req->length = size; |
| req->complete = rx_complete; |
| req->context = skb; |
| |
| retval = usb_ep_queue(out, req, gfp_flags); |
| if (retval == -ENOMEM) |
| enomem: |
| defer_kevent(dev, WORK_RX_MEMORY); |
| if (retval) { |
| DBG(dev, "rx submit --> %d\n", retval); |
| if (skb) |
| dev_kfree_skb_any(skb); |
| spin_lock_irqsave(&dev->req_lock, flags); |
| list_add(&req->list, &dev->rx_reqs); |
| spin_unlock_irqrestore(&dev->req_lock, flags); |
| } |
| return retval; |
| } |
| |
| static void rx_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct sk_buff *skb = req->context, *skb2; |
| struct eth_dev *dev = ep->driver_data; |
| int status = req->status; |
| |
| switch (status) { |
| |
| /* normal completion */ |
| case 0: |
| skb_put(skb, req->actual); |
| |
| if (dev->unwrap) { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| if (dev->port_usb) { |
| status = dev->unwrap(dev->port_usb, |
| skb, |
| &dev->rx_frames); |
| } else { |
| dev_kfree_skb_any(skb); |
| status = -ENOTCONN; |
| } |
| spin_unlock_irqrestore(&dev->lock, flags); |
| } else { |
| skb_queue_tail(&dev->rx_frames, skb); |
| } |
| skb = NULL; |
| |
| skb2 = skb_dequeue(&dev->rx_frames); |
| while (skb2) { |
| if (status < 0 |
| || ETH_HLEN > skb2->len |
| || skb2->len > GETHER_MAX_ETH_FRAME_LEN) { |
| dev->net->stats.rx_errors++; |
| dev->net->stats.rx_length_errors++; |
| DBG(dev, "rx length %d\n", skb2->len); |
| dev_kfree_skb_any(skb2); |
| goto next_frame; |
| } |
| skb2->protocol = eth_type_trans(skb2, dev->net); |
| dev->net->stats.rx_packets++; |
| dev->net->stats.rx_bytes += skb2->len; |
| |
| /* no buffer copies needed, unless hardware can't |
| * use skb buffers. |
| */ |
| status = netif_rx(skb2); |
| next_frame: |
| skb2 = skb_dequeue(&dev->rx_frames); |
| } |
| break; |
| |
| /* software-driven interface shutdown */ |
| case -ECONNRESET: /* unlink */ |
| case -ESHUTDOWN: /* disconnect etc */ |
| VDBG(dev, "rx shutdown, code %d\n", status); |
| goto quiesce; |
| |
| /* for hardware automagic (such as pxa) */ |
| case -ECONNABORTED: /* endpoint reset */ |
| DBG(dev, "rx %s reset\n", ep->name); |
| defer_kevent(dev, WORK_RX_MEMORY); |
| quiesce: |
| dev_kfree_skb_any(skb); |
| goto clean; |
| |
| /* data overrun */ |
| case -EOVERFLOW: |
| dev->net->stats.rx_over_errors++; |
| fallthrough; |
| |
| default: |
| dev->net->stats.rx_errors++; |
| DBG(dev, "rx status %d\n", status); |
| break; |
| } |
| |
| if (skb) |
| dev_kfree_skb_any(skb); |
| if (!netif_running(dev->net)) { |
| clean: |
| spin_lock(&dev->req_lock); |
| list_add(&req->list, &dev->rx_reqs); |
| spin_unlock(&dev->req_lock); |
| req = NULL; |
| } |
| if (req) |
| rx_submit(dev, req, GFP_ATOMIC); |
| } |
| |
| static int prealloc(struct list_head *list, struct usb_ep *ep, unsigned n) |
| { |
| unsigned i; |
| struct usb_request *req; |
| |
| if (!n) |
| return -ENOMEM; |
| |
| /* queue/recycle up to N requests */ |
| i = n; |
| list_for_each_entry(req, list, list) { |
| if (i-- == 0) |
| goto extra; |
| } |
| while (i--) { |
| req = usb_ep_alloc_request(ep, GFP_ATOMIC); |
| if (!req) |
| return list_empty(list) ? -ENOMEM : 0; |
| list_add(&req->list, list); |
| } |
| return 0; |
| |
| extra: |
| /* free extras */ |
| for (;;) { |
| struct list_head *next; |
| |
| next = req->list.next; |
| list_del(&req->list); |
| usb_ep_free_request(ep, req); |
| |
| if (next == list) |
| break; |
| |
| req = container_of(next, struct usb_request, list); |
| } |
| return 0; |
| } |
| |
| static int alloc_requests(struct eth_dev *dev, struct gether *link, unsigned n) |
| { |
| int status; |
| |
| spin_lock(&dev->req_lock); |
| status = prealloc(&dev->tx_reqs, link->in_ep, n); |
| if (status < 0) |
| goto fail; |
| status = prealloc(&dev->rx_reqs, link->out_ep, n); |
| if (status < 0) |
| goto fail; |
| goto done; |
| fail: |
| DBG(dev, "can't alloc requests\n"); |
| done: |
| spin_unlock(&dev->req_lock); |
| return status; |
| } |
| |
| static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags) |
| { |
| struct usb_request *req; |
| unsigned long flags; |
| |
| /* fill unused rxq slots with some skb */ |
| spin_lock_irqsave(&dev->req_lock, flags); |
| while (!list_empty(&dev->rx_reqs)) { |
| req = list_first_entry(&dev->rx_reqs, struct usb_request, list); |
| list_del_init(&req->list); |
| spin_unlock_irqrestore(&dev->req_lock, flags); |
| |
| if (rx_submit(dev, req, gfp_flags) < 0) { |
| defer_kevent(dev, WORK_RX_MEMORY); |
| return; |
| } |
| |
| spin_lock_irqsave(&dev->req_lock, flags); |
| } |
| spin_unlock_irqrestore(&dev->req_lock, flags); |
| } |
| |
| static void eth_work(struct work_struct *work) |
| { |
| struct eth_dev *dev = container_of(work, struct eth_dev, work); |
| |
| if (test_and_clear_bit(WORK_RX_MEMORY, &dev->todo)) { |
| if (netif_running(dev->net)) |
| rx_fill(dev, GFP_KERNEL); |
| } |
| |
| if (dev->todo) |
| DBG(dev, "work done, flags = 0x%lx\n", dev->todo); |
| } |
| |
| static void tx_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct sk_buff *skb = req->context; |
| struct eth_dev *dev = ep->driver_data; |
| |
| switch (req->status) { |
| default: |
| dev->net->stats.tx_errors++; |
| VDBG(dev, "tx err %d\n", req->status); |
| fallthrough; |
| case -ECONNRESET: /* unlink */ |
| case -ESHUTDOWN: /* disconnect etc */ |
| dev_kfree_skb_any(skb); |
| break; |
| case 0: |
| dev->net->stats.tx_bytes += skb->len; |
| dev_consume_skb_any(skb); |
| } |
| dev->net->stats.tx_packets++; |
| |
| spin_lock(&dev->req_lock); |
| list_add(&req->list, &dev->tx_reqs); |
| spin_unlock(&dev->req_lock); |
| |
| atomic_dec(&dev->tx_qlen); |
| if (netif_carrier_ok(dev->net)) |
| netif_wake_queue(dev->net); |
| } |
| |
| static inline int is_promisc(u16 cdc_filter) |
| { |
| return cdc_filter & USB_CDC_PACKET_TYPE_PROMISCUOUS; |
| } |
| |
| static int ether_wakeup_host(struct gether *port) |
| { |
| int ret; |
| struct usb_function *func = &port->func; |
| struct usb_gadget *gadget = func->config->cdev->gadget; |
| |
| if (func->func_suspended) |
| ret = usb_func_wakeup(func); |
| else |
| ret = usb_gadget_wakeup(gadget); |
| |
| return ret; |
| } |
| |
| static netdev_tx_t eth_start_xmit(struct sk_buff *skb, |
| struct net_device *net) |
| { |
| struct eth_dev *dev = netdev_priv(net); |
| int length = 0; |
| int retval; |
| struct usb_request *req = NULL; |
| unsigned long flags; |
| struct usb_ep *in; |
| u16 cdc_filter; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| if (dev->port_usb) { |
| in = dev->port_usb->in_ep; |
| cdc_filter = dev->port_usb->cdc_filter; |
| } else { |
| in = NULL; |
| cdc_filter = 0; |
| } |
| |
| if (dev->port_usb && dev->port_usb->is_suspend) { |
| DBG(dev, "Port suspended. Triggering wakeup\n"); |
| netif_stop_queue(net); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| ether_wakeup_host(dev->port_usb); |
| return NETDEV_TX_BUSY; |
| } |
| |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| if (!in) { |
| if (skb) |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| /* apply outgoing CDC or RNDIS filters */ |
| if (skb && !is_promisc(cdc_filter)) { |
| u8 *dest = skb->data; |
| |
| if (is_multicast_ether_addr(dest)) { |
| u16 type; |
| |
| /* ignores USB_CDC_PACKET_TYPE_MULTICAST and host |
| * SET_ETHERNET_MULTICAST_FILTERS requests |
| */ |
| if (is_broadcast_ether_addr(dest)) |
| type = USB_CDC_PACKET_TYPE_BROADCAST; |
| else |
| type = USB_CDC_PACKET_TYPE_ALL_MULTICAST; |
| if (!(cdc_filter & type)) { |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| } |
| /* ignores USB_CDC_PACKET_TYPE_DIRECTED */ |
| } |
| |
| spin_lock_irqsave(&dev->req_lock, flags); |
| /* |
| * this freelist can be empty if an interrupt triggered disconnect() |
| * and reconfigured the gadget (shutting down this queue) after the |
| * network stack decided to xmit but before we got the spinlock. |
| */ |
| if (list_empty(&dev->tx_reqs)) { |
| spin_unlock_irqrestore(&dev->req_lock, flags); |
| return NETDEV_TX_BUSY; |
| } |
| |
| req = list_first_entry(&dev->tx_reqs, struct usb_request, list); |
| list_del(&req->list); |
| |
| /* temporarily stop TX queue when the freelist empties */ |
| if (list_empty(&dev->tx_reqs)) |
| netif_stop_queue(net); |
| spin_unlock_irqrestore(&dev->req_lock, flags); |
| |
| /* no buffer copies needed, unless the network stack did it |
| * or the hardware can't use skb buffers. |
| * or there's not enough space for extra headers we need |
| */ |
| if (dev->wrap) { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| if (dev->port_usb) |
| skb = dev->wrap(dev->port_usb, skb); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| if (!skb) { |
| /* Multi frame CDC protocols may store the frame for |
| * later which is not a dropped frame. |
| */ |
| if (dev->port_usb && |
| dev->port_usb->supports_multi_frame) |
| goto multiframe; |
| goto drop; |
| } |
| } |
| |
| length = skb->len; |
| req->buf = skb->data; |
| req->context = skb; |
| req->complete = tx_complete; |
| |
| /* NCM requires no zlp if transfer is dwNtbInMaxSize */ |
| if (dev->port_usb && |
| dev->port_usb->is_fixed && |
| length == dev->port_usb->fixed_in_len && |
| (length % in->maxpacket) == 0) |
| req->zero = 0; |
| else |
| req->zero = 1; |
| |
| /* use zlp framing on tx for strict CDC-Ether conformance, |
| * though any robust network rx path ignores extra padding. |
| * and some hardware doesn't like to write zlps. |
| */ |
| if (req->zero && !dev->zlp && (length % in->maxpacket) == 0) |
| length++; |
| |
| req->length = length; |
| |
| retval = usb_ep_queue(in, req, GFP_ATOMIC); |
| switch (retval) { |
| default: |
| DBG(dev, "tx queue err %d\n", retval); |
| break; |
| case 0: |
| netif_trans_update(net); |
| atomic_inc(&dev->tx_qlen); |
| } |
| |
| if (retval) { |
| dev_kfree_skb_any(skb); |
| drop: |
| dev->net->stats.tx_dropped++; |
| multiframe: |
| spin_lock_irqsave(&dev->req_lock, flags); |
| if (list_empty(&dev->tx_reqs)) |
| netif_start_queue(net); |
| list_add(&req->list, &dev->tx_reqs); |
| spin_unlock_irqrestore(&dev->req_lock, flags); |
| } |
| return NETDEV_TX_OK; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static void eth_start(struct eth_dev *dev, gfp_t gfp_flags) |
| { |
| DBG(dev, "%s\n", __func__); |
| |
| /* fill the rx queue */ |
| rx_fill(dev, gfp_flags); |
| |
| /* and open the tx floodgates */ |
| atomic_set(&dev->tx_qlen, 0); |
| netif_wake_queue(dev->net); |
| } |
| |
| static int eth_open(struct net_device *net) |
| { |
| struct eth_dev *dev = netdev_priv(net); |
| struct gether *link; |
| |
| DBG(dev, "%s\n", __func__); |
| if (netif_carrier_ok(dev->net)) |
| eth_start(dev, GFP_KERNEL); |
| |
| spin_lock_irq(&dev->lock); |
| link = dev->port_usb; |
| if (link && link->open) |
| link->open(link); |
| spin_unlock_irq(&dev->lock); |
| |
| return 0; |
| } |
| |
| static int eth_stop(struct net_device *net) |
| { |
| struct eth_dev *dev = netdev_priv(net); |
| unsigned long flags; |
| |
| VDBG(dev, "%s\n", __func__); |
| netif_stop_queue(net); |
| |
| DBG(dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n", |
| dev->net->stats.rx_packets, dev->net->stats.tx_packets, |
| dev->net->stats.rx_errors, dev->net->stats.tx_errors |
| ); |
| |
| /* ensure there are no more active requests */ |
| spin_lock_irqsave(&dev->lock, flags); |
| if (dev->port_usb) { |
| struct gether *link = dev->port_usb; |
| const struct usb_endpoint_descriptor *in; |
| const struct usb_endpoint_descriptor *out; |
| |
| if (link->close) |
| link->close(link); |
| |
| /* NOTE: we have no abort-queue primitive we could use |
| * to cancel all pending I/O. Instead, we disable then |
| * reenable the endpoints ... this idiom may leave toggle |
| * wrong, but that's a self-correcting error. |
| * |
| * REVISIT: we *COULD* just let the transfers complete at |
| * their own pace; the network stack can handle old packets. |
| * For the moment we leave this here, since it works. |
| */ |
| in = link->in_ep->desc; |
| out = link->out_ep->desc; |
| usb_ep_disable(link->in_ep); |
| usb_ep_disable(link->out_ep); |
| if (netif_carrier_ok(net)) { |
| DBG(dev, "host still using in/out endpoints\n"); |
| link->in_ep->desc = in; |
| link->out_ep->desc = out; |
| usb_ep_enable(link->in_ep); |
| usb_ep_enable(link->out_ep); |
| } |
| } |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| return 0; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int get_ether_addr(const char *str, u8 *dev_addr) |
| { |
| if (str) { |
| unsigned i; |
| |
| for (i = 0; i < 6; i++) { |
| unsigned char num; |
| |
| if ((*str == '.') || (*str == ':')) |
| str++; |
| num = hex_to_bin(*str++) << 4; |
| num |= hex_to_bin(*str++); |
| dev_addr [i] = num; |
| } |
| if (is_valid_ether_addr(dev_addr)) |
| return 0; |
| } |
| eth_random_addr(dev_addr); |
| return 1; |
| } |
| |
| static int get_ether_addr_str(u8 dev_addr[ETH_ALEN], char *str, int len) |
| { |
| if (len < 18) |
| return -EINVAL; |
| |
| snprintf(str, len, "%pM", dev_addr); |
| return 18; |
| } |
| |
| static const struct net_device_ops eth_netdev_ops = { |
| .ndo_open = eth_open, |
| .ndo_stop = eth_stop, |
| .ndo_start_xmit = eth_start_xmit, |
| .ndo_set_mac_address = eth_mac_addr, |
| .ndo_validate_addr = eth_validate_addr, |
| }; |
| |
| static struct device_type gadget_type = { |
| .name = "gadget", |
| }; |
| |
| /* |
| * gether_setup_name - initialize one ethernet-over-usb link |
| * @g: gadget to associated with these links |
| * @ethaddr: NULL, or a buffer in which the ethernet address of the |
| * host side of the link is recorded |
| * @netname: name for network device (for example, "usb") |
| * Context: may sleep |
| * |
| * This sets up the single network link that may be exported by a |
| * gadget driver using this framework. The link layer addresses are |
| * set up using module parameters. |
| * |
| * Returns an eth_dev pointer on success, or an ERR_PTR on failure. |
| */ |
| struct eth_dev *gether_setup_name(struct usb_gadget *g, |
| const char *dev_addr, const char *host_addr, |
| u8 ethaddr[ETH_ALEN], unsigned qmult, const char *netname) |
| { |
| struct eth_dev *dev; |
| struct net_device *net; |
| int status; |
| u8 addr[ETH_ALEN]; |
| |
| net = alloc_etherdev(sizeof *dev); |
| if (!net) |
| return ERR_PTR(-ENOMEM); |
| |
| dev = netdev_priv(net); |
| spin_lock_init(&dev->lock); |
| spin_lock_init(&dev->req_lock); |
| INIT_WORK(&dev->work, eth_work); |
| INIT_LIST_HEAD(&dev->tx_reqs); |
| INIT_LIST_HEAD(&dev->rx_reqs); |
| |
| skb_queue_head_init(&dev->rx_frames); |
| |
| /* network device setup */ |
| dev->net = net; |
| dev->qmult = qmult; |
| snprintf(net->name, sizeof(net->name), "%s%%d", netname); |
| |
| if (get_ether_addr(dev_addr, addr)) { |
| net->addr_assign_type = NET_ADDR_RANDOM; |
| dev_warn(&g->dev, |
| "using random %s ethernet address\n", "self"); |
| } else { |
| net->addr_assign_type = NET_ADDR_SET; |
| } |
| eth_hw_addr_set(net, addr); |
| if (get_ether_addr(host_addr, dev->host_mac)) |
| dev_warn(&g->dev, |
| "using random %s ethernet address\n", "host"); |
| |
| if (ethaddr) |
| memcpy(ethaddr, dev->host_mac, ETH_ALEN); |
| |
| net->netdev_ops = ð_netdev_ops; |
| |
| net->ethtool_ops = &ops; |
| |
| /* MTU range: 14 - 15412 */ |
| net->min_mtu = ETH_HLEN; |
| net->max_mtu = GETHER_MAX_MTU_SIZE; |
| |
| dev->gadget = g; |
| SET_NETDEV_DEV(net, &g->dev); |
| SET_NETDEV_DEVTYPE(net, &gadget_type); |
| |
| status = register_netdev(net); |
| if (status < 0) { |
| dev_dbg(&g->dev, "register_netdev failed, %d\n", status); |
| free_netdev(net); |
| dev = ERR_PTR(status); |
| } else { |
| INFO(dev, "MAC %pM\n", net->dev_addr); |
| INFO(dev, "HOST MAC %pM\n", dev->host_mac); |
| |
| /* |
| * two kinds of host-initiated state changes: |
| * - iff DATA transfer is active, carrier is "on" |
| * - tx queueing enabled if open *and* carrier is "on" |
| */ |
| netif_carrier_off(net); |
| } |
| |
| return dev; |
| } |
| EXPORT_SYMBOL_GPL(gether_setup_name); |
| |
| struct net_device *gether_setup_name_default(const char *netname) |
| { |
| struct net_device *net; |
| struct eth_dev *dev; |
| |
| net = alloc_etherdev(sizeof(*dev)); |
| if (!net) |
| return ERR_PTR(-ENOMEM); |
| |
| dev = netdev_priv(net); |
| spin_lock_init(&dev->lock); |
| spin_lock_init(&dev->req_lock); |
| INIT_WORK(&dev->work, eth_work); |
| INIT_LIST_HEAD(&dev->tx_reqs); |
| INIT_LIST_HEAD(&dev->rx_reqs); |
| |
| skb_queue_head_init(&dev->rx_frames); |
| |
| /* network device setup */ |
| dev->net = net; |
| dev->qmult = QMULT_DEFAULT; |
| snprintf(net->name, sizeof(net->name), "%s%%d", netname); |
| |
| eth_random_addr(dev->dev_mac); |
| |
| /* by default we always have a random MAC address */ |
| net->addr_assign_type = NET_ADDR_RANDOM; |
| |
| eth_random_addr(dev->host_mac); |
| |
| net->netdev_ops = ð_netdev_ops; |
| |
| net->ethtool_ops = &ops; |
| SET_NETDEV_DEVTYPE(net, &gadget_type); |
| |
| /* MTU range: 14 - 15412 */ |
| net->min_mtu = ETH_HLEN; |
| net->max_mtu = GETHER_MAX_MTU_SIZE; |
| |
| return net; |
| } |
| EXPORT_SYMBOL_GPL(gether_setup_name_default); |
| |
| int gether_register_netdev(struct net_device *net) |
| { |
| struct eth_dev *dev; |
| struct usb_gadget *g; |
| int status; |
| |
| if (!net->dev.parent) |
| return -EINVAL; |
| dev = netdev_priv(net); |
| g = dev->gadget; |
| |
| eth_hw_addr_set(net, dev->dev_mac); |
| |
| status = register_netdev(net); |
| if (status < 0) { |
| dev_dbg(&g->dev, "register_netdev failed, %d\n", status); |
| return status; |
| } else { |
| INFO(dev, "HOST MAC %pM\n", dev->host_mac); |
| INFO(dev, "MAC %pM\n", dev->dev_mac); |
| |
| /* two kinds of host-initiated state changes: |
| * - iff DATA transfer is active, carrier is "on" |
| * - tx queueing enabled if open *and* carrier is "on" |
| */ |
| netif_carrier_off(net); |
| } |
| |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(gether_register_netdev); |
| |
| void gether_set_gadget(struct net_device *net, struct usb_gadget *g) |
| { |
| struct eth_dev *dev; |
| |
| dev = netdev_priv(net); |
| dev->gadget = g; |
| SET_NETDEV_DEV(net, &g->dev); |
| } |
| EXPORT_SYMBOL_GPL(gether_set_gadget); |
| |
| int gether_set_dev_addr(struct net_device *net, const char *dev_addr) |
| { |
| struct eth_dev *dev; |
| u8 new_addr[ETH_ALEN]; |
| |
| dev = netdev_priv(net); |
| if (get_ether_addr(dev_addr, new_addr)) |
| return -EINVAL; |
| memcpy(dev->dev_mac, new_addr, ETH_ALEN); |
| net->addr_assign_type = NET_ADDR_SET; |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(gether_set_dev_addr); |
| |
| int gether_get_dev_addr(struct net_device *net, char *dev_addr, int len) |
| { |
| struct eth_dev *dev; |
| int ret; |
| |
| dev = netdev_priv(net); |
| ret = get_ether_addr_str(dev->dev_mac, dev_addr, len); |
| if (ret + 1 < len) { |
| dev_addr[ret++] = '\n'; |
| dev_addr[ret] = '\0'; |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(gether_get_dev_addr); |
| |
| int gether_set_host_addr(struct net_device *net, const char *host_addr) |
| { |
| struct eth_dev *dev; |
| u8 new_addr[ETH_ALEN]; |
| |
| dev = netdev_priv(net); |
| if (get_ether_addr(host_addr, new_addr)) |
| return -EINVAL; |
| memcpy(dev->host_mac, new_addr, ETH_ALEN); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(gether_set_host_addr); |
| |
| int gether_get_host_addr(struct net_device *net, char *host_addr, int len) |
| { |
| struct eth_dev *dev; |
| int ret; |
| |
| dev = netdev_priv(net); |
| ret = get_ether_addr_str(dev->host_mac, host_addr, len); |
| if (ret + 1 < len) { |
| host_addr[ret++] = '\n'; |
| host_addr[ret] = '\0'; |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(gether_get_host_addr); |
| |
| int gether_get_host_addr_cdc(struct net_device *net, char *host_addr, int len) |
| { |
| struct eth_dev *dev; |
| |
| if (len < 13) |
| return -EINVAL; |
| |
| dev = netdev_priv(net); |
| snprintf(host_addr, len, "%pm", dev->host_mac); |
| |
| string_upper(host_addr, host_addr); |
| |
| return strlen(host_addr); |
| } |
| EXPORT_SYMBOL_GPL(gether_get_host_addr_cdc); |
| |
| void gether_get_host_addr_u8(struct net_device *net, u8 host_mac[ETH_ALEN]) |
| { |
| struct eth_dev *dev; |
| |
| dev = netdev_priv(net); |
| memcpy(host_mac, dev->host_mac, ETH_ALEN); |
| } |
| EXPORT_SYMBOL_GPL(gether_get_host_addr_u8); |
| |
| void gether_set_qmult(struct net_device *net, unsigned qmult) |
| { |
| struct eth_dev *dev; |
| |
| dev = netdev_priv(net); |
| dev->qmult = qmult; |
| } |
| EXPORT_SYMBOL_GPL(gether_set_qmult); |
| |
| unsigned gether_get_qmult(struct net_device *net) |
| { |
| struct eth_dev *dev; |
| |
| dev = netdev_priv(net); |
| return dev->qmult; |
| } |
| EXPORT_SYMBOL_GPL(gether_get_qmult); |
| |
| int gether_get_ifname(struct net_device *net, char *name, int len) |
| { |
| struct eth_dev *dev = netdev_priv(net); |
| int ret; |
| |
| rtnl_lock(); |
| ret = scnprintf(name, len, "%s\n", |
| dev->ifname_set ? net->name : netdev_name(net)); |
| rtnl_unlock(); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(gether_get_ifname); |
| |
| int gether_set_ifname(struct net_device *net, const char *name, int len) |
| { |
| struct eth_dev *dev = netdev_priv(net); |
| char tmp[IFNAMSIZ]; |
| const char *p; |
| |
| if (name[len - 1] == '\n') |
| len--; |
| |
| if (len >= sizeof(tmp)) |
| return -E2BIG; |
| |
| strscpy(tmp, name, len + 1); |
| if (!dev_valid_name(tmp)) |
| return -EINVAL; |
| |
| /* Require exactly one %d, so binding will not fail with EEXIST. */ |
| p = strchr(name, '%'); |
| if (!p || p[1] != 'd' || strchr(p + 2, '%')) |
| return -EINVAL; |
| |
| strncpy(net->name, tmp, sizeof(net->name)); |
| dev->ifname_set = true; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(gether_set_ifname); |
| |
| void gether_suspend(struct gether *link) |
| { |
| struct eth_dev *dev = link->ioport; |
| unsigned long flags; |
| |
| if (!dev) |
| return; |
| |
| if (atomic_read(&dev->tx_qlen)) { |
| /* |
| * There is a transfer in progress. So we trigger a remote |
| * wakeup to inform the host. |
| */ |
| ether_wakeup_host(dev->port_usb); |
| return; |
| } |
| spin_lock_irqsave(&dev->lock, flags); |
| link->is_suspend = true; |
| spin_unlock_irqrestore(&dev->lock, flags); |
| } |
| EXPORT_SYMBOL_GPL(gether_suspend); |
| |
| void gether_resume(struct gether *link) |
| { |
| struct eth_dev *dev = link->ioport; |
| unsigned long flags; |
| |
| if (!dev) |
| return; |
| |
| if (netif_queue_stopped(dev->net)) |
| netif_start_queue(dev->net); |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| link->is_suspend = false; |
| spin_unlock_irqrestore(&dev->lock, flags); |
| } |
| EXPORT_SYMBOL_GPL(gether_resume); |
| |
| /* |
| * gether_cleanup - remove Ethernet-over-USB device |
| * Context: may sleep |
| * |
| * This is called to free all resources allocated by @gether_setup(). |
| */ |
| void gether_cleanup(struct eth_dev *dev) |
| { |
| if (!dev) |
| return; |
| |
| unregister_netdev(dev->net); |
| flush_work(&dev->work); |
| free_netdev(dev->net); |
| } |
| EXPORT_SYMBOL_GPL(gether_cleanup); |
| |
| /** |
| * gether_connect - notify network layer that USB link is active |
| * @link: the USB link, set up with endpoints, descriptors matching |
| * current device speed, and any framing wrapper(s) set up. |
| * Context: irqs blocked |
| * |
| * This is called to activate endpoints and let the network layer know |
| * the connection is active ("carrier detect"). It may cause the I/O |
| * queues to open and start letting network packets flow, but will in |
| * any case activate the endpoints so that they respond properly to the |
| * USB host. |
| * |
| * Verify net_device pointer returned using IS_ERR(). If it doesn't |
| * indicate some error code (negative errno), ep->driver_data values |
| * have been overwritten. |
| */ |
| struct net_device *gether_connect(struct gether *link) |
| { |
| struct eth_dev *dev = link->ioport; |
| int result = 0; |
| |
| if (!dev) |
| return ERR_PTR(-EINVAL); |
| |
| link->in_ep->driver_data = dev; |
| result = usb_ep_enable(link->in_ep); |
| if (result != 0) { |
| DBG(dev, "enable %s --> %d\n", |
| link->in_ep->name, result); |
| goto fail0; |
| } |
| |
| link->out_ep->driver_data = dev; |
| result = usb_ep_enable(link->out_ep); |
| if (result != 0) { |
| DBG(dev, "enable %s --> %d\n", |
| link->out_ep->name, result); |
| goto fail1; |
| } |
| |
| if (result == 0) |
| result = alloc_requests(dev, link, qlen(dev->gadget, |
| dev->qmult)); |
| |
| if (result == 0) { |
| dev->zlp = link->is_zlp_ok; |
| dev->no_skb_reserve = gadget_avoids_skb_reserve(dev->gadget); |
| DBG(dev, "qlen %d\n", qlen(dev->gadget, dev->qmult)); |
| |
| dev->header_len = link->header_len; |
| dev->unwrap = link->unwrap; |
| dev->wrap = link->wrap; |
| |
| spin_lock(&dev->lock); |
| dev->port_usb = link; |
| if (netif_running(dev->net)) { |
| if (link->open) |
| link->open(link); |
| } else { |
| if (link->close) |
| link->close(link); |
| } |
| spin_unlock(&dev->lock); |
| |
| netif_carrier_on(dev->net); |
| if (netif_running(dev->net)) |
| eth_start(dev, GFP_ATOMIC); |
| |
| /* on error, disable any endpoints */ |
| } else { |
| (void) usb_ep_disable(link->out_ep); |
| fail1: |
| (void) usb_ep_disable(link->in_ep); |
| } |
| fail0: |
| /* caller is responsible for cleanup on error */ |
| if (result < 0) |
| return ERR_PTR(result); |
| return dev->net; |
| } |
| EXPORT_SYMBOL_GPL(gether_connect); |
| |
| /** |
| * gether_disconnect - notify network layer that USB link is inactive |
| * @link: the USB link, on which gether_connect() was called |
| * Context: irqs blocked |
| * |
| * This is called to deactivate endpoints and let the network layer know |
| * the connection went inactive ("no carrier"). |
| * |
| * On return, the state is as if gether_connect() had never been called. |
| * The endpoints are inactive, and accordingly without active USB I/O. |
| * Pointers to endpoint descriptors and endpoint private data are nulled. |
| */ |
| void gether_disconnect(struct gether *link) |
| { |
| struct eth_dev *dev = link->ioport; |
| struct usb_request *req; |
| |
| WARN_ON(!dev); |
| if (!dev) |
| return; |
| |
| DBG(dev, "%s\n", __func__); |
| |
| netif_stop_queue(dev->net); |
| netif_carrier_off(dev->net); |
| |
| /* disable endpoints, forcing (synchronous) completion |
| * of all pending i/o. then free the request objects |
| * and forget about the endpoints. |
| */ |
| usb_ep_disable(link->in_ep); |
| spin_lock(&dev->req_lock); |
| while (!list_empty(&dev->tx_reqs)) { |
| req = list_first_entry(&dev->tx_reqs, struct usb_request, list); |
| list_del(&req->list); |
| |
| spin_unlock(&dev->req_lock); |
| usb_ep_free_request(link->in_ep, req); |
| spin_lock(&dev->req_lock); |
| } |
| spin_unlock(&dev->req_lock); |
| link->in_ep->desc = NULL; |
| |
| usb_ep_disable(link->out_ep); |
| spin_lock(&dev->req_lock); |
| while (!list_empty(&dev->rx_reqs)) { |
| req = list_first_entry(&dev->rx_reqs, struct usb_request, list); |
| list_del(&req->list); |
| |
| spin_unlock(&dev->req_lock); |
| usb_ep_free_request(link->out_ep, req); |
| spin_lock(&dev->req_lock); |
| } |
| spin_unlock(&dev->req_lock); |
| link->out_ep->desc = NULL; |
| |
| /* finish forgetting about this USB link episode */ |
| dev->header_len = 0; |
| dev->unwrap = NULL; |
| dev->wrap = NULL; |
| |
| spin_lock(&dev->lock); |
| dev->port_usb = NULL; |
| link->is_suspend = false; |
| spin_unlock(&dev->lock); |
| } |
| EXPORT_SYMBOL_GPL(gether_disconnect); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("David Brownell"); |