hwmon: (it87) Use pr_fmt and pr_<level>
Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index a428a92..316b648 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -38,6 +38,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
@@ -1570,26 +1572,25 @@
case 0xffff: /* No device at all */
goto exit;
default:
- pr_debug(DRVNAME ": Unsupported chip (DEVID=0x%x)\n",
- chip_type);
+ pr_debug("Unsupported chip (DEVID=0x%x)\n", chip_type);
goto exit;
}
superio_select(PME);
if (!(superio_inb(IT87_ACT_REG) & 0x01)) {
- pr_info("it87: Device not activated, skipping\n");
+ pr_info("Device not activated, skipping\n");
goto exit;
}
*address = superio_inw(IT87_BASE_REG) & ~(IT87_EXTENT - 1);
if (*address == 0) {
- pr_info("it87: Base address not set, skipping\n");
+ pr_info("Base address not set, skipping\n");
goto exit;
}
err = 0;
sio_data->revision = superio_inb(DEVREV) & 0x0f;
- pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n",
+ pr_info("Found IT%04xF chip at 0x%x, revision %d\n",
chip_type, *address, sio_data->revision);
/* in8 (Vbat) is always internal */
@@ -1615,7 +1616,7 @@
} else {
/* We need at least 4 VID pins */
if (reg & 0x0f) {
- pr_info("it87: VID is disabled (pins used for GPIO)\n");
+ pr_info("VID is disabled (pins used for GPIO)\n");
sio_data->skip_vid = 1;
}
}
@@ -1651,7 +1652,7 @@
if (sio_data->type == it8720 && !(reg & (1 << 1))) {
reg |= (1 << 1);
superio_outb(IT87_SIO_PINX2_REG, reg);
- pr_notice("it87: Routing internal VCCH to in7\n");
+ pr_notice("Routing internal VCCH to in7\n");
}
if (reg & (1 << 0))
sio_data->internal |= (1 << 0);
@@ -1661,7 +1662,7 @@
sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
}
if (sio_data->beep_pin)
- pr_info("it87: Beeping is supported\n");
+ pr_info("Beeping is supported\n");
/* Disable specific features based on DMI strings */
board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
@@ -1675,8 +1676,7 @@
the PWM2 duty cycle, so we disable it.
I use the board name string as the trigger in case
the same board is ever used in other systems. */
- pr_info("it87: Disabling pwm2 due to "
- "hardware constraints\n");
+ pr_info("Disabling pwm2 due to hardware constraints\n");
sio_data->skip_pwm = (1 << 1);
}
}
@@ -2189,28 +2189,26 @@
pdev = platform_device_alloc(DRVNAME, address);
if (!pdev) {
err = -ENOMEM;
- printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+ pr_err("Device allocation failed\n");
goto exit;
}
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
- printk(KERN_ERR DRVNAME ": Device resource addition failed "
- "(%d)\n", err);
+ pr_err("Device resource addition failed (%d)\n", err);
goto exit_device_put;
}
err = platform_device_add_data(pdev, sio_data,
sizeof(struct it87_sio_data));
if (err) {
- printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+ pr_err("Platform data allocation failed\n");
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
- printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
- err);
+ pr_err("Device addition failed (%d)\n", err);
goto exit_device_put;
}
