ata: Convert ata_<foo>_printk(KERN_<LEVEL> to ata_<foo>_<level>
Saves text by removing nearly duplicated text format strings by
creating ata_<foo>_printk functions and printf extension %pV.
ata defconfig size shrinks ~5% (~8KB), allyesconfig ~2.5% (~13KB)
Format string duplication comes from:
#define ata_link_printk(link, lv, fmt, args...) do { \
if (sata_pmp_attached((link)->ap) || (link)->ap->slave_link) \
printk("%sata%u.%02u: "fmt, lv, (link)->ap->print_id, \
(link)->pmp , ##args); \
else \
printk("%sata%u: "fmt, lv, (link)->ap->print_id , ##args); \
} while(0)
Coalesce long formats.
$ size drivers/ata/built-in.*
text data bss dec hex filename
544969 73893 116584 735446 b38d6 drivers/ata/built-in.allyesconfig.ata.o
558429 73893 117864 750186 b726a drivers/ata/built-in.allyesconfig.dev_level.o
141328 14689 4220 160237 271ed drivers/ata/built-in.defconfig.ata.o
149567 14689 4220 168476 2921c drivers/ata/built-in.defconfig.dev_level.o
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index dda8511..85f7b14 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -540,9 +540,8 @@
if (rc == -EIO) {
irq_sts = readl(port_mmio + PORT_IRQ_STAT);
if (irq_sts & PORT_IRQ_BAD_PMP) {
- ata_link_printk(link, KERN_WARNING,
- "applying SB600 PMP SRST workaround "
- "and retrying\n");
+ ata_link_warn(link,
+ "applying SB600 PMP SRST workaround and retrying\n");
rc = ahci_do_softreset(link, class, 0, deadline,
ahci_check_ready);
}
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 721d38b..7df56ec 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -81,14 +81,13 @@
xfer_mask |= ata_xfer_mode2mask(XFER_MW_DMA_0);
}
- ata_dev_printk(dev, KERN_INFO, "configured for %s\n",
- name);
+ ata_dev_info(dev, "configured for %s\n", name);
dev->xfer_mode = ata_xfer_mask2mode(xfer_mask);
dev->xfer_shift = ata_xfer_mode2shift(dev->xfer_mode);
dev->flags &= ~ATA_DFLAG_PIO;
} else {
- ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
+ ata_dev_info(dev, "configured for PIO\n");
dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
dev->flags |= ATA_DFLAG_PIO;
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 39761f5..c102d7d 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -286,10 +286,10 @@
/* the count should not be larger than PAGE_SIZE */
if (count > PAGE_SIZE) {
if (printk_ratelimit())
- ata_port_printk(ap, KERN_WARNING,
- "EM read buffer size too large: "
- "buffer size %u, page size %lu\n",
- hpriv->em_buf_sz, PAGE_SIZE);
+ ata_port_warn(ap,
+ "EM read buffer size too large: "
+ "buffer size %u, page size %lu\n",
+ hpriv->em_buf_sz, PAGE_SIZE);
count = PAGE_SIZE;
}
@@ -1124,8 +1124,8 @@
if (hpriv->flags & AHCI_HFLAG_SECT255) {
dev->max_sectors = 255;
- ata_dev_printk(dev, KERN_INFO,
- "SB600 AHCI: limiting to 255 sectors per cmd\n");
+ ata_dev_info(dev,
+ "SB600 AHCI: limiting to 255 sectors per cmd\n");
}
}
@@ -1249,8 +1249,7 @@
/* prepare for SRST (AHCI-1.1 10.4.1) */
rc = ahci_kick_engine(ap);
if (rc && rc != -EOPNOTSUPP)
- ata_link_printk(link, KERN_WARNING,
- "failed to reset engine (errno=%d)\n", rc);
+ ata_link_warn(link, "failed to reset engine (errno=%d)\n", rc);
ata_tf_init(link->device, &tf);
@@ -1283,8 +1282,7 @@
* be trusted. Treat device readiness timeout as link
* offline.
*/
- ata_link_printk(link, KERN_INFO,
- "device not ready, treating as offline\n");
+ ata_link_info(link, "device not ready, treating as offline\n");
*class = ATA_DEV_NONE;
} else if (rc) {
/* link occupied, -ENODEV too is an error */
@@ -1297,7 +1295,7 @@
return 0;
fail:
- ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason);
+ ata_link_err(link, "softreset failed (%s)\n", reason);
return rc;
}
@@ -1966,7 +1964,7 @@
if (rc == 0)
ahci_power_down(ap);
else {
- ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc);
+ ata_port_err(ap, "%s (%d)\n", emsg, rc);
ahci_start_port(ap);
}
@@ -2061,7 +2059,7 @@
/* de-initialize port */
rc = ahci_deinit_port(ap, &emsg);
if (rc)
- ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc);
+ ata_port_warn(ap, "%s (%d)\n", emsg, rc);
}
void ahci_print_info(struct ata_host *host, const char *scc_s)
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index a791b8ce..e0a5b55 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -332,25 +332,22 @@
rc = -EINVAL;
if (ACPI_FAILURE(status)) {
- ata_port_printk(ap, KERN_ERR,
- "ACPI get timing mode failed (AE 0x%x)\n",
- status);
+ ata_port_err(ap, "ACPI get timing mode failed (AE 0x%x)\n",
+ status);
goto out_free;
}
out_obj = output.pointer;
if (out_obj->type != ACPI_TYPE_BUFFER) {
- ata_port_printk(ap, KERN_WARNING,
- "_GTM returned unexpected object type 0x%x\n",
- out_obj->type);
+ ata_port_warn(ap, "_GTM returned unexpected object type 0x%x\n",
+ out_obj->type);
goto out_free;
}
if (out_obj->buffer.length != sizeof(struct ata_acpi_gtm)) {
- ata_port_printk(ap, KERN_ERR,
- "_GTM returned invalid length %d\n",
- out_obj->buffer.length);
+ ata_port_err(ap, "_GTM returned invalid length %d\n",
+ out_obj->buffer.length);
goto out_free;
}
@@ -402,8 +399,8 @@
if (status == AE_NOT_FOUND)
return -ENOENT;
if (ACPI_FAILURE(status)) {
- ata_port_printk(ap, KERN_ERR,
- "ACPI set timing mode failed (status=0x%x)\n", status);
+ ata_port_err(ap, "ACPI set timing mode failed (status=0x%x)\n",
+ status);
return -EINVAL;
}
return 0;
@@ -450,8 +447,8 @@
output.pointer = NULL; /* ACPI-CA sets this; save/free it later */
if (ata_msg_probe(ap))
- ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
- __func__, ap->port_no);
+ ata_dev_dbg(dev, "%s: ENTER: port#: %d\n",
+ __func__, ap->port_no);
/* _GTF has no input parameters */
status = acpi_evaluate_object(dev->acpi_handle, "_GTF", NULL, &output);
@@ -459,9 +456,8 @@
if (ACPI_FAILURE(status)) {
if (status != AE_NOT_FOUND) {
- ata_dev_printk(dev, KERN_WARNING,
- "_GTF evaluation failed (AE 0x%x)\n",
- status);
+ ata_dev_warn(dev, "_GTF evaluation failed (AE 0x%x)\n",
+ status);
rc = -EINVAL;
}
goto out_free;
@@ -469,27 +465,24 @@
if (!output.length || !output.pointer) {
if (ata_msg_probe(ap))
- ata_dev_printk(dev, KERN_DEBUG, "%s: Run _GTF: "
- "length or ptr is NULL (0x%llx, 0x%p)\n",
- __func__,
- (unsigned long long)output.length,
- output.pointer);
+ ata_dev_dbg(dev, "%s: Run _GTF: length or ptr is NULL (0x%llx, 0x%p)\n",
+ __func__,
+ (unsigned long long)output.length,
+ output.pointer);
rc = -EINVAL;
goto out_free;
}
if (out_obj->type != ACPI_TYPE_BUFFER) {
- ata_dev_printk(dev, KERN_WARNING,
- "_GTF unexpected object type 0x%x\n",
- out_obj->type);
+ ata_dev_warn(dev, "_GTF unexpected object type 0x%x\n",
+ out_obj->type);
rc = -EINVAL;
goto out_free;
}
if (out_obj->buffer.length % REGS_PER_GTF) {
- ata_dev_printk(dev, KERN_WARNING,
- "unexpected _GTF length (%d)\n",
- out_obj->buffer.length);
+ ata_dev_warn(dev, "unexpected _GTF length (%d)\n",
+ out_obj->buffer.length);
rc = -EINVAL;
goto out_free;
}
@@ -499,9 +492,8 @@
if (gtf) {
*gtf = (void *)out_obj->buffer.pointer;
if (ata_msg_probe(ap))
- ata_dev_printk(dev, KERN_DEBUG,
- "%s: returning gtf=%p, gtf_count=%d\n",
- __func__, *gtf, rc);
+ ata_dev_dbg(dev, "%s: returning gtf=%p, gtf_count=%d\n",
+ __func__, *gtf, rc);
}
return rc;
@@ -811,8 +803,8 @@
union acpi_object in_params[1];
if (ata_msg_probe(ap))
- ata_dev_printk(dev, KERN_DEBUG, "%s: ix = %d, port#: %d\n",
- __func__, dev->devno, ap->port_no);
+ ata_dev_dbg(dev, "%s: ix = %d, port#: %d\n",
+ __func__, dev->devno, ap->port_no);
/* Give the drive Identify data to the drive via the _SDD method */
/* _SDD: set up input parameters */
@@ -832,8 +824,7 @@
return -ENOENT;
if (ACPI_FAILURE(status)) {
- ata_dev_printk(dev, KERN_WARNING,
- "ACPI _SDD failed (AE 0x%x)\n", status);
+ ata_dev_warn(dev, "ACPI _SDD failed (AE 0x%x)\n", status);
return -EIO;
}
@@ -983,8 +974,8 @@
if (nr_executed) {
rc = ata_dev_reread_id(dev, 0);
if (rc < 0) {
- ata_dev_printk(dev, KERN_ERR, "failed to IDENTIFY "
- "after ACPI commands\n");
+ ata_dev_err(dev,
+ "failed to IDENTIFY after ACPI commands\n");
return rc;
}
}
@@ -1002,8 +993,7 @@
return rc;
}
- ata_dev_printk(dev, KERN_WARNING,
- "ACPI: failed the second time, disabled\n");
+ ata_dev_warn(dev, "ACPI: failed the second time, disabled\n");
dev->acpi_handle = NULL;
/* We can safely continue if no _GTF command has been executed
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 481089c..ef5612e4 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -335,8 +335,7 @@
continue;
ap->cbl = fe->param.cbl;
- ata_port_printk(ap, KERN_NOTICE,
- "FORCE: cable set to %s\n", fe->param.name);
+ ata_port_notice(ap, "FORCE: cable set to %s\n", fe->param.name);
return;
}
}
@@ -378,8 +377,7 @@
/* only honor the first spd limit */
if (!did_spd && fe->param.spd_limit) {
link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
- ata_link_printk(link, KERN_NOTICE,
- "FORCE: PHY spd limit set to %s\n",
+ ata_link_notice(link, "FORCE: PHY spd limit set to %s\n",
fe->param.name);
did_spd = true;
}
@@ -387,7 +385,7 @@
/* let lflags stack */
if (fe->param.lflags) {
link->flags |= fe->param.lflags;
- ata_link_printk(link, KERN_NOTICE,
+ ata_link_notice(link,
"FORCE: link flag 0x%x forced -> 0x%x\n",
fe->param.lflags, link->flags);
}
@@ -442,8 +440,8 @@
dev->pio_mask = pio_mask;
}
- ata_dev_printk(dev, KERN_NOTICE,
- "FORCE: xfer_mask set to %s\n", fe->param.name);
+ ata_dev_notice(dev, "FORCE: xfer_mask set to %s\n",
+ fe->param.name);
return;
}
}
@@ -486,8 +484,8 @@
dev->horkage |= fe->param.horkage_on;
dev->horkage &= ~fe->param.horkage_off;
- ata_dev_printk(dev, KERN_NOTICE,
- "FORCE: horkage modified (%s)\n", fe->param.name);
+ ata_dev_notice(dev, "FORCE: horkage modified (%s)\n",
+ fe->param.name);
}
}
@@ -711,8 +709,8 @@
sect = tf->lbal;
if (!sect) {
- ata_dev_printk(dev, KERN_WARNING, "device reported "
- "invalid CHS sector 0\n");
+ ata_dev_warn(dev,
+ "device reported invalid CHS sector 0\n");
sect = 1; /* oh well */
}
@@ -1230,8 +1228,9 @@
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
if (err_mask) {
- ata_dev_printk(dev, KERN_WARNING, "failed to read native "
- "max address (err_mask=0x%x)\n", err_mask);
+ ata_dev_warn(dev,
+ "failed to read native max address (err_mask=0x%x)\n",
+ err_mask);
if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED))
return -EACCES;
return -EIO;
@@ -1292,8 +1291,9 @@
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
if (err_mask) {
- ata_dev_printk(dev, KERN_WARNING, "failed to set "
- "max address (err_mask=0x%x)\n", err_mask);
+ ata_dev_warn(dev,
+ "failed to set max address (err_mask=0x%x)\n",
+ err_mask);
if (err_mask == AC_ERR_DEV &&
(tf.feature & (ATA_ABORTED | ATA_IDNF)))
return -EACCES;
@@ -1336,8 +1336,8 @@
* be unlocked, skip HPA resizing.
*/
if (rc == -EACCES || !unlock_hpa) {
- ata_dev_printk(dev, KERN_WARNING, "HPA support seems "
- "broken, skipping HPA handling\n");
+ ata_dev_warn(dev,
+ "HPA support seems broken, skipping HPA handling\n");
dev->horkage |= ATA_HORKAGE_BROKEN_HPA;
/* we can continue if device aborted the command */
@@ -1355,14 +1355,13 @@
return 0;
if (native_sectors > sectors)
- ata_dev_printk(dev, KERN_INFO,
+ ata_dev_info(dev,
"HPA detected: current %llu, native %llu\n",
(unsigned long long)sectors,
(unsigned long long)native_sectors);
else if (native_sectors < sectors)
- ata_dev_printk(dev, KERN_WARNING,
- "native sectors (%llu) is smaller than "
- "sectors (%llu)\n",
+ ata_dev_warn(dev,
+ "native sectors (%llu) is smaller than sectors (%llu)\n",
(unsigned long long)native_sectors,
(unsigned long long)sectors);
return 0;
@@ -1372,10 +1371,10 @@
rc = ata_set_max_sectors(dev, native_sectors);
if (rc == -EACCES) {
/* if device aborted the command, skip HPA resizing */
- ata_dev_printk(dev, KERN_WARNING, "device aborted resize "
- "(%llu -> %llu), skipping HPA handling\n",
- (unsigned long long)sectors,
- (unsigned long long)native_sectors);
+ ata_dev_warn(dev,
+ "device aborted resize (%llu -> %llu), skipping HPA handling\n",
+ (unsigned long long)sectors,
+ (unsigned long long)native_sectors);
dev->horkage |= ATA_HORKAGE_BROKEN_HPA;
return 0;
} else if (rc)
@@ -1384,14 +1383,14 @@
/* re-read IDENTIFY data */
rc = ata_dev_reread_id(dev, 0);
if (rc) {
- ata_dev_printk(dev, KERN_ERR, "failed to re-read IDENTIFY "
- "data after HPA resizing\n");
+ ata_dev_err(dev,
+ "failed to re-read IDENTIFY data after HPA resizing\n");
return rc;
}
if (print_info) {
u64 new_sectors = ata_id_n_sectors(dev->id);
- ata_dev_printk(dev, KERN_INFO,
+ ata_dev_info(dev,
"HPA unlocked: %llu -> %llu, native %llu\n",
(unsigned long long)sectors,
(unsigned long long)new_sectors,
@@ -1655,8 +1654,8 @@
ata_qc_complete(qc);
if (ata_msg_warn(ap))
- ata_dev_printk(dev, KERN_WARNING,
- "qc timeout (cmd 0x%x)\n", command);
+ ata_dev_warn(dev, "qc timeout (cmd 0x%x)\n",
+ command);
}
spin_unlock_irqrestore(ap->lock, flags);
@@ -1870,7 +1869,7 @@
int rc;
if (ata_msg_ctl(ap))
- ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__);
+ ata_dev_dbg(dev, "%s: ENTER\n", __func__);
retry:
ata_tf_init(dev, &tf);
@@ -1909,14 +1908,13 @@
if (err_mask) {
if (err_mask & AC_ERR_NODEV_HINT) {
- ata_dev_printk(dev, KERN_DEBUG,
- "NODEV after polling detection\n");
+ ata_dev_dbg(dev, "NODEV after polling detection\n");
return -ENOENT;
}
if (is_semb) {
- ata_dev_printk(dev, KERN_INFO, "IDENTIFY failed on "
- "device w/ SEMB sig, disabled\n");
+ ata_dev_info(dev,
+ "IDENTIFY failed on device w/ SEMB sig, disabled\n");
/* SEMB is not supported yet */
*p_class = ATA_DEV_SEMB_UNSUP;
return 0;
@@ -1942,8 +1940,8 @@
* both flavors of IDENTIFYs which happens
* sometimes with phantom devices.
*/
- ata_dev_printk(dev, KERN_DEBUG,
- "both IDENTIFYs aborted, assuming NODEV\n");
+ ata_dev_dbg(dev,
+ "both IDENTIFYs aborted, assuming NODEV\n");
return -ENOENT;
}
@@ -1953,9 +1951,9 @@
}
if (dev->horkage & ATA_HORKAGE_DUMP_ID) {
- ata_dev_printk(dev, KERN_DEBUG, "dumping IDENTIFY data, "
- "class=%d may_fallback=%d tried_spinup=%d\n",
- class, may_fallback, tried_spinup);
+ ata_dev_dbg(dev, "dumping IDENTIFY data, "
+ "class=%d may_fallback=%d tried_spinup=%d\n",
+ class, may_fallback, tried_spinup);
print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET,
16, 2, id, ATA_ID_WORDS * sizeof(*id), true);
}
@@ -2034,8 +2032,8 @@
err_out:
if (ata_msg_warn(ap))
- ata_dev_printk(dev, KERN_WARNING, "failed to IDENTIFY "
- "(%s, err_mask=0x%x)\n", reason, err_mask);
+ ata_dev_warn(dev, "failed to IDENTIFY (%s, err_mask=0x%x)\n",
+ reason, err_mask);
return rc;
}
@@ -2065,9 +2063,8 @@
* guaranteed by setting sata_spd_limit to target_limit above.
*/
if (plink->sata_spd > target) {
- ata_dev_printk(dev, KERN_INFO,
- "applying link speed limit horkage to %s\n",
- sata_spd_string(target));
+ ata_dev_info(dev, "applying link speed limit horkage to %s\n",
+ sata_spd_string(target));
return -EAGAIN;
}
return 0;
@@ -2110,8 +2107,9 @@
err_mask = ata_dev_set_feature(dev, SETFEATURES_SATA_ENABLE,
SATA_FPDMA_AA);
if (err_mask) {
- ata_dev_printk(dev, KERN_ERR, "failed to enable AA"
- "(error_mask=0x%x)\n", err_mask);
+ ata_dev_err(dev,
+ "failed to enable AA (error_mask=0x%x)\n",
+ err_mask);
if (err_mask != AC_ERR_DEV) {
dev->horkage |= ATA_HORKAGE_BROKEN_FPDMA_AA;
return -EIO;
@@ -2154,31 +2152,28 @@
int rc;
if (!ata_dev_enabled(dev) && ata_msg_info(ap)) {
- ata_dev_printk(dev, KERN_INFO, "%s: ENTER/EXIT -- nodev\n",
- __func__);
+ ata_dev_info(dev, "%s: ENTER/EXIT -- nodev\n", __func__);
return 0;
}
if (ata_msg_probe(ap))
- ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__);
+ ata_dev_dbg(dev, "%s: ENTER\n", __func__);
/* set horkage */
dev->horkage |= ata_dev_blacklisted(dev);
ata_force_horkage(dev);
if (dev->horkage & ATA_HORKAGE_DISABLE) {
- ata_dev_printk(dev, KERN_INFO,
- "unsupported device, disabling\n");
+ ata_dev_info(dev, "unsupported device, disabling\n");
ata_dev_disable(dev);
return 0;
}
if ((!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) &&
dev->class == ATA_DEV_ATAPI) {
- ata_dev_printk(dev, KERN_WARNING,
- "WARNING: ATAPI is %s, device ignored.\n",
- atapi_enabled ? "not supported with this driver"
- : "disabled");
+ ata_dev_warn(dev, "WARNING: ATAPI is %s, device ignored\n",
+ atapi_enabled ? "not supported with this driver"
+ : "disabled");
ata_dev_disable(dev);
return 0;
}
@@ -2199,12 +2194,12 @@
/* print device capabilities */
if (ata_msg_probe(ap))
- ata_dev_printk(dev, KERN_DEBUG,
- "%s: cfg 49:%04x 82:%04x 83:%04x 84:%04x "
- "85:%04x 86:%04x 87:%04x 88:%04x\n",
- __func__,
- id[49], id[82], id[83], id[84],
- id[85], id[86], id[87], id[88]);
+ ata_dev_dbg(dev,
+ "%s: cfg 49:%04x 82:%04x 83:%04x 84:%04x "
+ "85:%04x 86:%04x 87:%04x 88:%04x\n",
+ __func__,
+ id[49], id[82], id[83], id[84],
+ id[85], id[86], id[87], id[88]);
/* initialize to-be-configured parameters */
dev->flags &= ~ATA_DFLAG_CFG_MASK;
@@ -2238,17 +2233,15 @@
if (ata_id_is_cfa(id)) {
/* CPRM may make this media unusable */
if (id[ATA_ID_CFA_KEY_MGMT] & 1)
- ata_dev_printk(dev, KERN_WARNING,
- "supports DRM functions and may "
- "not be fully accessible.\n");
+ ata_dev_warn(dev,
+ "supports DRM functions and may not be fully accessible\n");
snprintf(revbuf, 7, "CFA");
} else {
snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id));
/* Warn the user if the device has TPM extensions */
if (ata_id_has_tpm(id))
- ata_dev_printk(dev, KERN_WARNING,
- "supports DRM functions and may "
- "not be fully accessible.\n");
+ ata_dev_warn(dev,
+ "supports DRM functions and may not be fully accessible\n");
}
dev->n_sectors = ata_id_n_sectors(id);
@@ -2285,12 +2278,11 @@
/* print device info to dmesg */
if (ata_msg_drv(ap) && print_info) {
- ata_dev_printk(dev, KERN_INFO,
- "%s: %s, %s, max %s\n",
- revbuf, modelbuf, fwrevbuf,
- ata_mode_string(xfer_mask));
- ata_dev_printk(dev, KERN_INFO,
- "%Lu sectors, multi %u: %s %s\n",
+ ata_dev_info(dev, "%s: %s, %s, max %s\n",
+ revbuf, modelbuf, fwrevbuf,
+ ata_mode_string(xfer_mask));
+ ata_dev_info(dev,
+ "%llu sectors, multi %u: %s %s\n",
(unsigned long long)dev->n_sectors,
dev->multi_count, lba_desc, ncq_desc);
}
@@ -2311,15 +2303,14 @@
/* print device info to dmesg */
if (ata_msg_drv(ap) && print_info) {
- ata_dev_printk(dev, KERN_INFO,
- "%s: %s, %s, max %s\n",
- revbuf, modelbuf, fwrevbuf,
- ata_mode_string(xfer_mask));
- ata_dev_printk(dev, KERN_INFO,
- "%Lu sectors, multi %u, CHS %u/%u/%u\n",
- (unsigned long long)dev->n_sectors,
- dev->multi_count, dev->cylinders,
- dev->heads, dev->sectors);
+ ata_dev_info(dev, "%s: %s, %s, max %s\n",
+ revbuf, modelbuf, fwrevbuf,
+ ata_mode_string(xfer_mask));
+ ata_dev_info(dev,
+ "%llu sectors, multi %u, CHS %u/%u/%u\n",
+ (unsigned long long)dev->n_sectors,
+ dev->multi_count, dev->cylinders,
+ dev->heads, dev->sectors);
}
}
@@ -2336,8 +2327,7 @@
rc = atapi_cdb_len(id);
if ((rc < 12) || (rc > ATAPI_CDB_LEN)) {
if (ata_msg_warn(ap))
- ata_dev_printk(dev, KERN_WARNING,
- "unsupported CDB len\n");
+ ata_dev_warn(dev, "unsupported CDB len\n");
rc = -EINVAL;
goto err_out_nosup;
}
@@ -2358,9 +2348,9 @@
err_mask = ata_dev_set_feature(dev,
SETFEATURES_SATA_ENABLE, SATA_AN);
if (err_mask)
- ata_dev_printk(dev, KERN_ERR,
- "failed to enable ATAPI AN "
- "(err_mask=0x%x)\n", err_mask);
+ ata_dev_err(dev,
+ "failed to enable ATAPI AN (err_mask=0x%x)\n",
+ err_mask);
else {
dev->flags |= ATA_DFLAG_AN;
atapi_an_string = ", ATAPI AN";
@@ -2379,12 +2369,12 @@
/* print device info to dmesg */
if (ata_msg_drv(ap) && print_info)
- ata_dev_printk(dev, KERN_INFO,
- "ATAPI: %s, %s, max %s%s%s%s\n",
- modelbuf, fwrevbuf,
- ata_mode_string(xfer_mask),
- cdb_intr_string, atapi_an_string,
- dma_dir_string);
+ ata_dev_info(dev,
+ "ATAPI: %s, %s, max %s%s%s%s\n",
+ modelbuf, fwrevbuf,
+ ata_mode_string(xfer_mask),
+ cdb_intr_string, atapi_an_string,
+ dma_dir_string);
}
/* determine max_sectors */
@@ -2396,8 +2386,7 @@
200 sectors */
if (ata_dev_knobble(dev)) {
if (ata_msg_drv(ap) && print_info)
- ata_dev_printk(dev, KERN_INFO,
- "applying bridge limits\n");
+ ata_dev_info(dev, "applying bridge limits\n");
dev->udma_mask &= ATA_UDMA5;
dev->max_sectors = ATA_MAX_SECTORS;
}
@@ -2423,26 +2412,23 @@
bugs */
if (print_info) {
- ata_dev_printk(dev, KERN_WARNING,
+ ata_dev_warn(dev,
"Drive reports diagnostics failure. This may indicate a drive\n");
- ata_dev_printk(dev, KERN_WARNING,
+ ata_dev_warn(dev,
"fault or invalid emulation. Contact drive vendor for information.\n");
}
}
if ((dev->horkage & ATA_HORKAGE_FIRMWARE_WARN) && print_info) {
- ata_dev_printk(dev, KERN_WARNING, "WARNING: device requires "
- "firmware update to be fully functional.\n");
- ata_dev_printk(dev, KERN_WARNING, " contact the vendor "
- "or visit http://ata.wiki.kernel.org.\n");
+ ata_dev_warn(dev, "WARNING: device requires firmware update to be fully functional\n");
+ ata_dev_warn(dev, " contact the vendor or visit http://ata.wiki.kernel.org\n");
}
return 0;
err_out_nosup:
if (ata_msg_probe(ap))
- ata_dev_printk(dev, KERN_DEBUG,
- "%s: EXIT, err\n", __func__);
+ ata_dev_dbg(dev, "%s: EXIT, err\n", __func__);
return rc;
}
@@ -2663,13 +2649,11 @@
if (ata_phys_link_online(link)) {
tmp = (sstatus >> 4) & 0xf;
- ata_link_printk(link, KERN_INFO,
- "SATA link up %s (SStatus %X SControl %X)\n",
- sata_spd_string(tmp), sstatus, scontrol);
+ ata_link_info(link, "SATA link up %s (SStatus %X SControl %X)\n",
+ sata_spd_string(tmp), sstatus, scontrol);
} else {
- ata_link_printk(link, KERN_INFO,
- "SATA link down (SStatus %X SControl %X)\n",
- sstatus, scontrol);
+ ata_link_info(link, "SATA link down (SStatus %X SControl %X)\n",
+ sstatus, scontrol);
}
}
@@ -2758,8 +2742,8 @@
link->sata_spd_limit = mask;
- ata_link_printk(link, KERN_WARNING, "limiting SATA link speed to %s\n",
- sata_spd_string(fls(mask)));
+ ata_link_warn(link, "limiting SATA link speed to %s\n",
+ sata_spd_string(fls(mask)));
return 0;
}
@@ -3136,8 +3120,7 @@
snprintf(buf, sizeof(buf), "%s",
ata_mode_string(xfer_mask));
- ata_dev_printk(dev, KERN_WARNING,
- "limiting speed to %s\n", buf);
+ ata_dev_warn(dev, "limiting speed to %s\n", buf);
}
ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask,
@@ -3164,9 +3147,9 @@
dev_err_whine = " (SET_XFERMODE skipped)";
else {
if (nosetxfer)
- ata_dev_printk(dev, KERN_WARNING,
- "NOSETXFER but PATA detected - can't "
- "skip SETXFER, might malfunction\n");
+ ata_dev_warn(dev,
+ "NOSETXFER but PATA detected - can't "
+ "skip SETXFER, might malfunction\n");
err_mask = ata_dev_set_xfermode(dev);
}
@@ -3216,15 +3199,14 @@
DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n",
dev->xfer_shift, (int)dev->xfer_mode);
- ata_dev_printk(dev, KERN_INFO, "configured for %s%s\n",
- ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode)),
- dev_err_whine);
+ ata_dev_info(dev, "configured for %s%s\n",
+ ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode)),
+ dev_err_whine);
return 0;
fail:
- ata_dev_printk(dev, KERN_ERR, "failed to set xfermode "
- "(err_mask=0x%x)\n", err_mask);
+ ata_dev_err(dev, "failed to set xfermode (err_mask=0x%x)\n", err_mask);
return -EIO;
}
@@ -3286,7 +3268,7 @@
/* step 2: always set host PIO timings */
ata_for_each_dev(dev, link, ENABLED) {
if (dev->pio_mode == 0xff) {
- ata_dev_printk(dev, KERN_WARNING, "no PIO support\n");
+ ata_dev_warn(dev, "no PIO support\n");
rc = -EINVAL;
goto out;
}
@@ -3404,7 +3386,7 @@
if (!warned && time_after(now, start + 5 * HZ) &&
(deadline - now > 3 * HZ)) {
- ata_link_printk(link, KERN_WARNING,
+ ata_link_warn(link,
"link is slow to respond, please be patient "
"(ready=%d)\n", tmp);
warned = 1;
@@ -3552,16 +3534,14 @@
} while ((scontrol & 0xf0f) != 0x300 && --tries);
if ((scontrol & 0xf0f) != 0x300) {
- ata_link_printk(link, KERN_ERR,
- "failed to resume link (SControl %X)\n",
- scontrol);
+ ata_link_err(link, "failed to resume link (SControl %X)\n",
+ scontrol);
return 0;
}
if (tries < ATA_LINK_RESUME_TRIES)
- ata_link_printk(link, KERN_WARNING,
- "link resume succeeded after %d retries\n",
- ATA_LINK_RESUME_TRIES - tries);
+ ata_link_warn(link, "link resume succeeded after %d retries\n",
+ ATA_LINK_RESUME_TRIES - tries);
if ((rc = sata_link_debounce(link, params, deadline)))
return rc;
@@ -3678,8 +3658,9 @@
rc = sata_link_resume(link, timing, deadline);
/* whine about phy resume failure but proceed */
if (rc && rc != -EOPNOTSUPP)
- ata_link_printk(link, KERN_WARNING, "failed to resume "
- "link for reset (errno=%d)\n", rc);
+ ata_link_warn(link,
+ "failed to resume link for reset (errno=%d)\n",
+ rc);
}
/* no point in trying softreset on offline link */
@@ -3795,8 +3776,7 @@
/* online is set iff link is online && reset succeeded */
if (online)
*online = false;
- ata_link_printk(link, KERN_ERR,
- "COMRESET failed (errno=%d)\n", rc);
+ ata_link_err(link, "COMRESET failed (errno=%d)\n", rc);
}
DPRINTK("EXIT, rc=%d\n", rc);
return rc;
@@ -3880,8 +3860,8 @@
unsigned char serial[2][ATA_ID_SERNO_LEN + 1];
if (dev->class != new_class) {
- ata_dev_printk(dev, KERN_INFO, "class mismatch %d != %d\n",
- dev->class, new_class);
+ ata_dev_info(dev, "class mismatch %d != %d\n",
+ dev->class, new_class);
return 0;
}
@@ -3891,14 +3871,14 @@
ata_id_c_string(new_id, serial[1], ATA_ID_SERNO, sizeof(serial[1]));
if (strcmp(model[0], model[1])) {
- ata_dev_printk(dev, KERN_INFO, "model number mismatch "
- "'%s' != '%s'\n", model[0], model[1]);
+ ata_dev_info(dev, "model number mismatch '%s' != '%s'\n",
+ model[0], model[1]);
return 0;
}
if (strcmp(serial[0], serial[1])) {
- ata_dev_printk(dev, KERN_INFO, "serial number mismatch "
- "'%s' != '%s'\n", serial[0], serial[1]);
+ ata_dev_info(dev, "serial number mismatch '%s' != '%s'\n",
+ serial[0], serial[1]);
return 0;
}
@@ -3968,8 +3948,8 @@
new_class != ATA_DEV_ATA &&
new_class != ATA_DEV_ATAPI &&
new_class != ATA_DEV_SEMB) {
- ata_dev_printk(dev, KERN_INFO, "class mismatch %u != %u\n",
- dev->class, new_class);
+ ata_dev_info(dev, "class mismatch %u != %u\n",
+ dev->class, new_class);
rc = -ENODEV;
goto fail;
}
@@ -3990,9 +3970,9 @@
return 0;
/* n_sectors has changed */
- ata_dev_printk(dev, KERN_WARNING, "n_sectors mismatch %llu != %llu\n",
- (unsigned long long)n_sectors,
- (unsigned long long)dev->n_sectors);
+ ata_dev_warn(dev, "n_sectors mismatch %llu != %llu\n",
+ (unsigned long long)n_sectors,
+ (unsigned long long)dev->n_sectors);
/*
* Something could have caused HPA to be unlocked
@@ -4001,9 +3981,9 @@
*/
if (dev->n_native_sectors == n_native_sectors &&
dev->n_sectors > n_sectors && dev->n_sectors == n_native_sectors) {
- ata_dev_printk(dev, KERN_WARNING,
- "new n_sectors matches native, probably "
- "late HPA unlock, n_sectors updated\n");
+ ata_dev_warn(dev,
+ "new n_sectors matches native, probably "
+ "late HPA unlock, n_sectors updated\n");
/* use the larger n_sectors */
return 0;
}
@@ -4017,9 +3997,9 @@
if (dev->n_native_sectors == n_native_sectors &&
dev->n_sectors < n_sectors && n_sectors == n_native_sectors &&
!(dev->horkage & ATA_HORKAGE_BROKEN_HPA)) {
- ata_dev_printk(dev, KERN_WARNING,
- "old n_sectors matches native, probably "
- "late HPA lock, will try to unlock HPA\n");
+ ata_dev_warn(dev,
+ "old n_sectors matches native, probably "
+ "late HPA lock, will try to unlock HPA\n");
/* try unlocking HPA */
dev->flags |= ATA_DFLAG_UNLOCK_HPA;
rc = -EIO;
@@ -4030,7 +4010,7 @@
dev->n_native_sectors = n_native_sectors;
dev->n_sectors = n_sectors;
fail:
- ata_dev_printk(dev, KERN_ERR, "revalidation failed (errno=%d)\n", rc);
+ ata_dev_err(dev, "revalidation failed (errno=%d)\n", rc);
return rc;
}
@@ -4358,15 +4338,15 @@
if (ata_dma_blacklisted(dev)) {
xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
- ata_dev_printk(dev, KERN_WARNING,
- "device is on DMA blacklist, disabling DMA\n");
+ ata_dev_warn(dev,
+ "device is on DMA blacklist, disabling DMA\n");
}
if ((host->flags & ATA_HOST_SIMPLEX) &&
host->simplex_claimed && host->simplex_claimed != ap) {
xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
- ata_dev_printk(dev, KERN_WARNING, "simplex DMA is claimed by "
- "other device, disabling DMA\n");
+ ata_dev_warn(dev,
+ "simplex DMA is claimed by other device, disabling DMA\n");
}
if (ap->flags & ATA_FLAG_NO_IORDY)
@@ -4386,8 +4366,8 @@
if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA))
/* UDMA/44 or higher would be available */
if (cable_is_40wire(ap)) {
- ata_dev_printk(dev, KERN_WARNING,
- "limited to UDMA/33 due to 40-wire cable\n");
+ ata_dev_warn(dev,
+ "limited to UDMA/33 due to 40-wire cable\n");
xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA);
}
@@ -4954,8 +4934,8 @@
done_mask = ap->qc_active ^ qc_active;
if (unlikely(done_mask & qc_active)) {
- ata_port_printk(ap, KERN_ERR, "illegal qc_active transition "
- "(%08x->%08x)\n", ap->qc_active, qc_active);
+ ata_port_err(ap, "illegal qc_active transition (%08x->%08x)\n",
+ ap->qc_active, qc_active);
return -EINVAL;
}
@@ -6022,14 +6002,13 @@
ap->udma_mask);
if (!ata_port_is_dummy(ap)) {
- ata_port_printk(ap, KERN_INFO,
- "%cATA max %s %s\n",
- (ap->flags & ATA_FLAG_SATA) ? 'S' : 'P',
- ata_mode_string(xfer_mask),
- ap->link.eh_info.desc);
+ ata_port_info(ap, "%cATA max %s %s\n",
+ (ap->flags & ATA_FLAG_SATA) ? 'S' : 'P',
+ ata_mode_string(xfer_mask),
+ ap->link.eh_info.desc);
ata_ehi_clear_desc(&ap->link.eh_info);
} else
- ata_port_printk(ap, KERN_INFO, "DUMMY\n");
+ ata_port_info(ap, "DUMMY\n");
}
/* perform each probe asynchronously */
@@ -6599,6 +6578,76 @@
};
/*
+ * Utility print functions
+ */
+int ata_port_printk(const struct ata_port *ap, const char *level,
+ const char *fmt, ...)
+{
+ struct va_format vaf;
+ va_list args;
+ int r;
+
+ va_start(args, fmt);
+
+ vaf.fmt = fmt;
+ vaf.va = &args;
+
+ r = printk("%sata%u: %pV", level, ap->print_id, &vaf);
+
+ va_end(args);
+
+ return r;
+}
+EXPORT_SYMBOL(ata_port_printk);
+
+int ata_link_printk(const struct ata_link *link, const char *level,
+ const char *fmt, ...)
+{
+ struct va_format vaf;
+ va_list args;
+ int r;
+
+ va_start(args, fmt);
+
+ vaf.fmt = fmt;
+ vaf.va = &args;
+
+ if (sata_pmp_attached(link->ap) || link->ap->slave_link)
+ r = printk("%sata%u.%02u: %pV",
+ level, link->ap->print_id, link->pmp, &vaf);
+ else
+ r = printk("%sata%u: %pV",
+ level, link->ap->print_id, &vaf);
+
+ va_end(args);
+
+ return r;
+}
+EXPORT_SYMBOL(ata_link_printk);
+
+int ata_dev_printk(const struct ata_device *dev, const char *level,
+ const char *fmt, ...)
+{
+ struct va_format vaf;
+ va_list args;
+ int r;
+
+ va_start(args, fmt);
+
+ vaf.fmt = fmt;
+ vaf.va = &args;
+
+ r = printk("%sata%u.%02u: %pV",
+ level, dev->link->ap->print_id, dev->link->pmp + dev->devno,
+ &vaf);
+
+ va_end(args);
+
+ return r;
+}
+EXPORT_SYMBOL(ata_dev_printk);
+
+/*
* libata is essentially a library of internal helper functions for
* low-level ATA host controller drivers. As such, the API/ABI is
* likely to change as new drivers are added and updated.
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 7f099d6..16fa457 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -782,8 +782,9 @@
spin_unlock_irqrestore(ap->lock, flags);
goto repeat;
}
- ata_port_printk(ap, KERN_ERR, "EH pending after %d "
- "tries, giving up\n", ATA_EH_MAX_TRIES);
+ ata_port_err(ap,
+ "EH pending after %d tries, giving up\n",
+ ATA_EH_MAX_TRIES);
ap->pflags &= ~ATA_PFLAG_EH_PENDING;
}
@@ -816,7 +817,7 @@
schedule_delayed_work(&ap->hotplug_task, 0);
if (ap->pflags & ATA_PFLAG_RECOVERED)
- ata_port_printk(ap, KERN_INFO, "EH complete\n");
+ ata_port_info(ap, "EH complete\n");
ap->pflags &= ~(ATA_PFLAG_SCSI_HOTPLUG | ATA_PFLAG_RECOVERED);
@@ -1310,7 +1311,7 @@
return;
if (ata_msg_drv(dev->link->ap))
- ata_dev_printk(dev, KERN_WARNING, "disabled\n");
+ ata_dev_warn(dev, "disabled\n");
ata_acpi_on_disable(dev);
ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 | ATA_DNXFER_QUIET);
dev->class++;
@@ -1515,8 +1516,8 @@
for (i = 0; i < ATA_SECT_SIZE; i++)
csum += buf[i];
if (csum)
- ata_dev_printk(dev, KERN_WARNING,
- "invalid checksum 0x%x on log page 10h\n", csum);
+ ata_dev_warn(dev, "invalid checksum 0x%x on log page 10h\n",
+ csum);
if (buf[0] & 0x80)
return -ENOENT;
@@ -1716,14 +1717,14 @@
memset(&tf, 0, sizeof(tf));
rc = ata_eh_read_log_10h(dev, &tag, &tf);
if (rc) {
- ata_link_printk(link, KERN_ERR, "failed to read log page 10h "
- "(errno=%d)\n", rc);
+ ata_link_err(link, "failed to read log page 10h (errno=%d)\n",
+ rc);
return;
}
if (!(link->sactive & (1 << tag))) {
- ata_link_printk(link, KERN_ERR, "log page 10h reported "
- "inactive tag %d\n", tag);
+ ata_link_err(link, "log page 10h reported inactive tag %d\n",
+ tag);
return;
}
@@ -1988,8 +1989,7 @@
(dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ |
ATA_DFLAG_NCQ_OFF)) == ATA_DFLAG_NCQ) {
dev->flags |= ATA_DFLAG_NCQ_OFF;
- ata_dev_printk(dev, KERN_WARNING,
- "NCQ disabled due to excessive errors\n");
+ ata_dev_warn(dev, "NCQ disabled due to excessive errors\n");
goto done;
}
@@ -2374,24 +2374,24 @@
ap->eh_tries);
if (ehc->i.dev) {
- ata_dev_printk(ehc->i.dev, KERN_ERR, "exception Emask 0x%x "
- "SAct 0x%x SErr 0x%x action 0x%x%s%s\n",
- ehc->i.err_mask, link->sactive, ehc->i.serror,
- ehc->i.action, frozen, tries_buf);
+ ata_dev_err(ehc->i.dev, "exception Emask 0x%x "
+ "SAct 0x%x SErr 0x%x action 0x%x%s%s\n",
+ ehc->i.err_mask, link->sactive, ehc->i.serror,
+ ehc->i.action, frozen, tries_buf);
if (desc)
- ata_dev_printk(ehc->i.dev, KERN_ERR, "%s\n", desc);
+ ata_dev_err(ehc->i.dev, "%s\n", desc);
} else {
- ata_link_printk(link, KERN_ERR, "exception Emask 0x%x "
- "SAct 0x%x SErr 0x%x action 0x%x%s%s\n",
- ehc->i.err_mask, link->sactive, ehc->i.serror,
- ehc->i.action, frozen, tries_buf);
+ ata_link_err(link, "exception Emask 0x%x "
+ "SAct 0x%x SErr 0x%x action 0x%x%s%s\n",
+ ehc->i.err_mask, link->sactive, ehc->i.serror,
+ ehc->i.action, frozen, tries_buf);
if (desc)
- ata_link_printk(link, KERN_ERR, "%s\n", desc);
+ ata_link_err(link, "%s\n", desc);
}
#ifdef CONFIG_ATA_VERBOSE_ERROR
if (ehc->i.serror)
- ata_link_printk(link, KERN_ERR,
+ ata_link_err(link,
"SError: { %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s}\n",
ehc->i.serror & SERR_DATA_RECOVERED ? "RecovData " : "",
ehc->i.serror & SERR_COMM_RECOVERED ? "RecovComm " : "",
@@ -2456,11 +2456,11 @@
} else {
const char *descr = ata_get_cmd_descript(cmd->command);
if (descr)
- ata_dev_printk(qc->dev, KERN_ERR,
- "failed command: %s\n", descr);
+ ata_dev_err(qc->dev, "failed command: %s\n",
+ descr);
}
- ata_dev_printk(qc->dev, KERN_ERR,
+ ata_dev_err(qc->dev,
"cmd %02x/%02x:%02x:%02x:%02x:%02x/%02x:%02x:%02x:%02x:%02x/%02x "
"tag %d%s\n %s"
"res %02x/%02x:%02x:%02x:%02x:%02x/%02x:%02x:%02x:%02x:%02x/%02x "
@@ -2481,11 +2481,9 @@
if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ |
ATA_ERR)) {
if (res->command & ATA_BUSY)
- ata_dev_printk(qc->dev, KERN_ERR,
- "status: { Busy }\n");
+ ata_dev_err(qc->dev, "status: { Busy }\n");
else
- ata_dev_printk(qc->dev, KERN_ERR,
- "status: { %s%s%s%s}\n",
+ ata_dev_err(qc->dev, "status: { %s%s%s%s}\n",
res->command & ATA_DRDY ? "DRDY " : "",
res->command & ATA_DF ? "DF " : "",
res->command & ATA_DRQ ? "DRQ " : "",
@@ -2495,8 +2493,7 @@
if (cmd->command != ATA_CMD_PACKET &&
(res->feature & (ATA_ICRC | ATA_UNC | ATA_IDNF |
ATA_ABORTED)))
- ata_dev_printk(qc->dev, KERN_ERR,
- "error: { %s%s%s%s}\n",
+ ata_dev_err(qc->dev, "error: { %s%s%s%s}\n",
res->feature & ATA_ICRC ? "ICRC " : "",
res->feature & ATA_UNC ? "UNC " : "",
res->feature & ATA_IDNF ? "IDNF " : "",
@@ -2650,8 +2647,7 @@
if (rc) {
if (rc == -ENOENT) {
- ata_link_printk(link, KERN_DEBUG,
- "port disabled. ignoring.\n");
+ ata_link_dbg(link, "port disabled--ignoring\n");
ehc->i.action &= ~ATA_EH_RESET;
ata_for_each_dev(dev, link, ALL)
@@ -2659,8 +2655,9 @@
rc = 0;
} else
- ata_link_printk(link, KERN_ERR,
- "prereset failed (errno=%d)\n", rc);
+ ata_link_err(link,
+ "prereset failed (errno=%d)\n",
+ rc);
goto out;
}
@@ -2689,8 +2686,8 @@
if (reset) {
if (verbose)
- ata_link_printk(link, KERN_INFO, "%s resetting link\n",
- reset == softreset ? "soft" : "hard");
+ ata_link_info(link, "%s resetting link\n",
+ reset == softreset ? "soft" : "hard");
/* mark that this EH session started with reset */
ehc->last_reset = jiffies;
@@ -2710,8 +2707,7 @@
int tmp;
if (verbose)
- ata_link_printk(slave, KERN_INFO,
- "hard resetting link\n");
+ ata_link_info(slave, "hard resetting link\n");
ata_eh_about_to_do(slave, NULL, ATA_EH_RESET);
tmp = ata_do_reset(slave, reset, classes, deadline,
@@ -2734,9 +2730,8 @@
reset = softreset;
if (!reset) {
- ata_link_printk(link, KERN_ERR,
- "follow-up softreset required "
- "but no softreset available\n");
+ ata_link_err(link,
+ "follow-up softreset required but no softreset available\n");
failed_link = link;
rc = -EINVAL;
goto fail;
@@ -2751,8 +2746,8 @@
}
} else {
if (verbose)
- ata_link_printk(link, KERN_INFO, "no reset method "
- "available, skipping reset\n");
+ ata_link_info(link,
+ "no reset method available, skipping reset\n");
if (!(lflags & ATA_LFLAG_ASSUME_CLASS))
lflags |= ATA_LFLAG_ASSUME_ATA;
}
@@ -2830,36 +2825,35 @@
ata_for_each_dev(dev, link, ALL) {
if (ata_phys_link_online(ata_dev_phys_link(dev))) {
if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
- ata_dev_printk(dev, KERN_DEBUG, "link online "
- "but device misclassifed\n");
+ ata_dev_dbg(dev, "link online but device misclassified\n");
classes[dev->devno] = ATA_DEV_NONE;
nr_unknown++;
}
} else if (ata_phys_link_offline(ata_dev_phys_link(dev))) {
if (ata_class_enabled(classes[dev->devno]))
- ata_dev_printk(dev, KERN_DEBUG, "link offline, "
- "clearing class %d to NONE\n",
- classes[dev->devno]);
+ ata_dev_dbg(dev,
+ "link offline, clearing class %d to NONE\n",
+ classes[dev->devno]);
classes[dev->devno] = ATA_DEV_NONE;
} else if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
- ata_dev_printk(dev, KERN_DEBUG, "link status unknown, "
- "clearing UNKNOWN to NONE\n");
+ ata_dev_dbg(dev,
+ "link status unknown, clearing UNKNOWN to NONE\n");
classes[dev->devno] = ATA_DEV_NONE;
}
}
if (classify && nr_unknown) {
if (try < max_tries) {
- ata_link_printk(link, KERN_WARNING, "link online but "
- "%d devices misclassified, retrying\n",
- nr_unknown);
+ ata_link_warn(link,
+ "link online but %d devices misclassified, retrying\n",
+ nr_unknown);
failed_link = link;
rc = -EAGAIN;
goto fail;
}
- ata_link_printk(link, KERN_WARNING,
- "link online but %d devices misclassified, "
- "device detection might fail\n", nr_unknown);
+ ata_link_warn(link,
+ "link online but %d devices misclassified, "
+ "device detection might fail\n", nr_unknown);
}
/* reset successful, schedule revalidation */
@@ -2896,7 +2890,7 @@
if (time_before(now, deadline)) {
unsigned long delta = deadline - now;
- ata_link_printk(failed_link, KERN_WARNING,
+ ata_link_warn(failed_link,
"reset failed (errno=%d), retrying in %u secs\n",
rc, DIV_ROUND_UP(jiffies_to_msecs(delta), 1000));
@@ -2987,7 +2981,7 @@
tf.protocol |= ATA_PROT_NODATA;
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
if (park && (err_mask || tf.lbal != 0xc4)) {
- ata_dev_printk(dev, KERN_ERR, "head unload failed!\n");
+ ata_dev_err(dev, "head unload failed!\n");
ehc->unloaded_mask &= ~(1 << dev->devno);
}
}
@@ -3198,8 +3192,9 @@
err_mask = atapi_eh_tur(dev, &sense_key);
if (err_mask != 0 && err_mask != AC_ERR_DEV) {
- ata_dev_printk(dev, KERN_WARNING, "TEST_UNIT_READY "
- "failed (err_mask=0x%x)\n", err_mask);
+ ata_dev_warn(dev,
+ "TEST_UNIT_READY failed (err_mask=0x%x)\n",
+ err_mask);
return -EIO;
}
@@ -3208,14 +3203,14 @@
err_mask = atapi_eh_request_sense(dev, sense_buffer, sense_key);
if (err_mask) {
- ata_dev_printk(dev, KERN_WARNING, "failed to clear "
+ ata_dev_warn(dev, "failed to clear "
"UNIT ATTENTION (err_mask=0x%x)\n", err_mask);
return -EIO;
}
}
- ata_dev_printk(dev, KERN_WARNING,
- "UNIT ATTENTION persists after %d tries\n", ATA_EH_UA_TRIES);
+ ata_dev_warn(dev, "UNIT ATTENTION persists after %d tries\n",
+ ATA_EH_UA_TRIES);
return 0;
}
@@ -3266,7 +3261,7 @@
tf.flags |= ATA_TFLAG_DEVICE;
tf.protocol = ATA_PROT_NODATA;
- ata_dev_printk(dev, KERN_WARNING, "retrying FLUSH 0x%x Emask 0x%x\n",
+ ata_dev_warn(dev, "retrying FLUSH 0x%x Emask 0x%x\n",
tf.command, qc->err_mask);
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
@@ -3281,7 +3276,7 @@
*/
qc->scsicmd->allowed = max(qc->scsicmd->allowed, 1);
} else {
- ata_dev_printk(dev, KERN_WARNING, "FLUSH failed Emask 0x%x\n",
+ ata_dev_warn(dev, "FLUSH failed Emask 0x%x\n",
err_mask);
rc = -EIO;
@@ -3355,9 +3350,9 @@
err_mask = ata_dev_set_feature(dev,
SETFEATURES_SATA_DISABLE, SATA_DIPM);
if (err_mask && err_mask != AC_ERR_DEV) {
- ata_dev_printk(dev, KERN_WARNING,
- "failed to disable DIPM, Emask 0x%x\n",
- err_mask);
+ ata_dev_warn(dev,
+ "failed to disable DIPM, Emask 0x%x\n",
+ err_mask);
rc = -EIO;
goto fail;
}
@@ -3399,7 +3394,7 @@
err_mask = ata_dev_set_feature(dev,
SETFEATURES_SATA_ENABLE, SATA_DIPM);
if (err_mask && err_mask != AC_ERR_DEV) {
- ata_dev_printk(dev, KERN_WARNING,
+ ata_dev_warn(dev,
"failed to enable DIPM, Emask 0x%x\n",
err_mask);
rc = -EIO;
@@ -3418,8 +3413,7 @@
/* if no device or only one more chance is left, disable LPM */
if (!dev || ehc->tries[dev->devno] <= 2) {
- ata_link_printk(link, KERN_WARNING,
- "disabling LPM on the link\n");
+ ata_link_warn(link, "disabling LPM on the link\n");
link->flags |= ATA_LFLAG_NO_LPM;
}
if (r_failed_dev)
@@ -3690,8 +3684,7 @@
rc = ata_eh_reset(link, ata_link_nr_vacant(link),
prereset, softreset, hardreset, postreset);
if (rc) {
- ata_link_printk(link, KERN_ERR,
- "reset failed, giving up\n");
+ ata_link_err(link, "reset failed, giving up\n");
goto out;
}
}
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index f06b7ea..3eb2b81 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -147,8 +147,8 @@
err_mask = sata_pmp_read(link, reg, r_val);
if (err_mask) {
- ata_link_printk(link, KERN_WARNING, "failed to read SCR %d "
- "(Emask=0x%x)\n", reg, err_mask);
+ ata_link_warn(link, "failed to read SCR %d (Emask=0x%x)\n",
+ reg, err_mask);
return -EIO;
}
return 0;
@@ -178,8 +178,8 @@
err_mask = sata_pmp_write(link, reg, val);
if (err_mask) {
- ata_link_printk(link, KERN_WARNING, "failed to write SCR %d "
- "(Emask=0x%x)\n", reg, err_mask);
+ ata_link_warn(link, "failed to write SCR %d (Emask=0x%x)\n",
+ reg, err_mask);
return -EIO;
}
return 0;
@@ -231,8 +231,8 @@
err_mask = sata_pmp_read(dev->link, reg, &gscr[reg]);
if (err_mask) {
- ata_dev_printk(dev, KERN_ERR, "failed to read PMP "
- "GSCR[%d] (Emask=0x%x)\n", reg, err_mask);
+ ata_dev_err(dev, "failed to read PMP GSCR[%d] (Emask=0x%x)\n",
+ reg, err_mask);
return -EIO;
}
}
@@ -311,26 +311,25 @@
}
if (print_info) {
- ata_dev_printk(dev, KERN_INFO, "Port Multiplier %s, "
- "0x%04x:0x%04x r%d, %d ports, feat 0x%x/0x%x\n",
- sata_pmp_spec_rev_str(gscr), vendor, devid,
- sata_pmp_gscr_rev(gscr),
- nr_ports, gscr[SATA_PMP_GSCR_FEAT_EN],
- gscr[SATA_PMP_GSCR_FEAT]);
+ ata_dev_info(dev, "Port Multiplier %s, "
+ "0x%04x:0x%04x r%d, %d ports, feat 0x%x/0x%x\n",
+ sata_pmp_spec_rev_str(gscr), vendor, devid,
+ sata_pmp_gscr_rev(gscr),
+ nr_ports, gscr[SATA_PMP_GSCR_FEAT_EN],
+ gscr[SATA_PMP_GSCR_FEAT]);
if (!(dev->flags & ATA_DFLAG_AN))
- ata_dev_printk(dev, KERN_INFO,
+ ata_dev_info(dev,
"Asynchronous notification not supported, "
- "hotplug won't\n work on fan-out "
- "ports. Use warm-plug instead.\n");
+ "hotplug won't work on fan-out ports. Use warm-plug instead.\n");
}
return 0;
fail:
- ata_dev_printk(dev, KERN_ERR,
- "failed to configure Port Multiplier (%s, Emask=0x%x)\n",
- reason, err_mask);
+ ata_dev_err(dev,
+ "failed to configure Port Multiplier (%s, Emask=0x%x)\n",
+ reason, err_mask);
return rc;
}
@@ -485,20 +484,17 @@
/* is it hanging off the right place? */
if (!sata_pmp_supported(ap)) {
- ata_dev_printk(dev, KERN_ERR,
- "host does not support Port Multiplier\n");
+ ata_dev_err(dev, "host does not support Port Multiplier\n");
return -EINVAL;
}
if (!ata_is_host_link(link)) {
- ata_dev_printk(dev, KERN_ERR,
- "Port Multipliers cannot be nested\n");
+ ata_dev_err(dev, "Port Multipliers cannot be nested\n");
return -EINVAL;
}
if (dev->devno) {
- ata_dev_printk(dev, KERN_ERR,
- "Port Multiplier must be the first device\n");
+ ata_dev_err(dev, "Port Multiplier must be the first device\n");
return -EINVAL;
}
@@ -517,8 +513,7 @@
rc = sata_pmp_init_links(ap, sata_pmp_gscr_ports(dev->gscr));
if (rc) {
- ata_dev_printk(dev, KERN_INFO,
- "failed to initialize PMP links\n");
+ ata_dev_info(dev, "failed to initialize PMP links\n");
goto fail;
}
@@ -562,7 +557,7 @@
struct ata_link *tlink;
unsigned long flags;
- ata_dev_printk(dev, KERN_INFO, "Port Multiplier detaching\n");
+ ata_dev_info(dev, "Port Multiplier detaching\n");
WARN_ON(!ata_is_host_link(link) || dev->devno ||
link->pmp != SATA_PMP_CTRL_PORT);
@@ -609,23 +604,23 @@
new_nr_ports = sata_pmp_gscr_ports(new_gscr);
if (old_vendor != new_vendor) {
- ata_dev_printk(dev, KERN_INFO, "Port Multiplier "
- "vendor mismatch '0x%x' != '0x%x'\n",
- old_vendor, new_vendor);
+ ata_dev_info(dev,
+ "Port Multiplier vendor mismatch '0x%x' != '0x%x'\n",
+ old_vendor, new_vendor);
return 0;
}
if (old_devid != new_devid) {
- ata_dev_printk(dev, KERN_INFO, "Port Multiplier "
- "device ID mismatch '0x%x' != '0x%x'\n",
- old_devid, new_devid);
+ ata_dev_info(dev,
+ "Port Multiplier device ID mismatch '0x%x' != '0x%x'\n",
+ old_devid, new_devid);
return 0;
}
if (old_nr_ports != new_nr_ports) {
- ata_dev_printk(dev, KERN_INFO, "Port Multiplier "
- "nr_ports mismatch '0x%x' != '0x%x'\n",
- old_nr_ports, new_nr_ports);
+ ata_dev_info(dev,
+ "Port Multiplier nr_ports mismatch '0x%x' != '0x%x'\n",
+ old_nr_ports, new_nr_ports);
return 0;
}
@@ -691,8 +686,7 @@
return 0;
fail:
- ata_dev_printk(dev, KERN_ERR,
- "PMP revalidation failed (errno=%d)\n", rc);
+ ata_dev_err(dev, "PMP revalidation failed (errno=%d)\n", rc);
DPRINTK("EXIT, rc=%d\n", rc);
return rc;
}
@@ -716,13 +710,14 @@
err_mask = sata_pmp_read(dev->link, SATA_PMP_GSCR_PROD_ID, &prod_id);
if (err_mask) {
- ata_dev_printk(dev, KERN_ERR, "failed to read PMP product ID "
- "(Emask=0x%x)\n", err_mask);
+ ata_dev_err(dev,
+ "failed to read PMP product ID (Emask=0x%x)\n",
+ err_mask);
return -EIO;
}
if (prod_id != dev->gscr[SATA_PMP_GSCR_PROD_ID]) {
- ata_dev_printk(dev, KERN_ERR, "PMP product ID mismatch\n");
+ ata_dev_err(dev, "PMP product ID mismatch\n");
/* something weird is going on, request full PMP recovery */
return -EIO;
}
@@ -777,8 +772,7 @@
rc = ata_eh_reset(link, 0, prereset, softreset, hardreset,
postreset);
if (rc) {
- ata_link_printk(link, KERN_ERR,
- "failed to reset PMP, giving up\n");
+ ata_link_err(link, "failed to reset PMP, giving up\n");
goto fail;
}
@@ -819,9 +813,9 @@
ehc->i.action |= ATA_EH_RESET;
goto retry;
} else {
- ata_dev_printk(dev, KERN_ERR, "failed to recover PMP "
- "after %d tries, giving up\n",
- ATA_EH_PMP_TRIES);
+ ata_dev_err(dev,
+ "failed to recover PMP after %d tries, giving up\n",
+ ATA_EH_PMP_TRIES);
goto fail;
}
}
@@ -867,8 +861,9 @@
/* unconditionally clear SError.N */
rc = sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG);
if (rc) {
- ata_link_printk(link, KERN_ERR, "failed to clear "
- "SError.N (errno=%d)\n", rc);
+ ata_link_err(link,
+ "failed to clear SError.N (errno=%d)\n",
+ rc);
return rc;
}
@@ -890,7 +885,7 @@
/* disable this link */
if (!(link->flags & ATA_LFLAG_DISABLED)) {
- ata_link_printk(link, KERN_WARNING,
+ ata_link_warn(link,
"failed to recover link after %d tries, disabling\n",
ATA_EH_PMP_LINK_TRIES);
@@ -974,7 +969,7 @@
err_mask = sata_pmp_write(pmp_link, SATA_PMP_GSCR_FEAT_EN,
gscr[SATA_PMP_GSCR_FEAT_EN]);
if (err_mask) {
- ata_link_printk(pmp_link, KERN_WARNING,
+ ata_link_warn(pmp_link,
"failed to disable NOTIFY (err_mask=0x%x)\n",
err_mask);
goto pmp_fail;
@@ -1018,8 +1013,9 @@
err_mask = sata_pmp_write(pmp_link, SATA_PMP_GSCR_FEAT_EN,
gscr[SATA_PMP_GSCR_FEAT_EN]);
if (err_mask) {
- ata_dev_printk(pmp_dev, KERN_ERR, "failed to write "
- "PMP_FEAT_EN (Emask=0x%x)\n", err_mask);
+ ata_dev_err(pmp_dev,
+ "failed to write PMP_FEAT_EN (Emask=0x%x)\n",
+ err_mask);
rc = -EIO;
goto pmp_fail;
}
@@ -1028,8 +1024,9 @@
/* check GSCR_ERROR */
err_mask = sata_pmp_read(pmp_link, SATA_PMP_GSCR_ERROR, &gscr_error);
if (err_mask) {
- ata_dev_printk(pmp_dev, KERN_ERR, "failed to read "
- "PMP_GSCR_ERROR (Emask=0x%x)\n", err_mask);
+ ata_dev_err(pmp_dev,
+ "failed to read PMP_GSCR_ERROR (Emask=0x%x)\n",
+ err_mask);
rc = -EIO;
goto pmp_fail;
}
@@ -1043,17 +1040,16 @@
ata_ehi_hotplugged(&link->eh_context.i);
cnt++;
} else {
- ata_link_printk(link, KERN_WARNING,
- "PHY status changed but maxed out on retries, "
- "giving up\n");
- ata_link_printk(link, KERN_WARNING,
- "Manully issue scan to resume this link\n");
+ ata_link_warn(link,
+ "PHY status changed but maxed out on retries, giving up\n");
+ ata_link_warn(link,
+ "Manually issue scan to resume this link\n");
}
}
if (cnt) {
- ata_port_printk(ap, KERN_INFO, "PMP SError.N set for some "
- "ports, repeating recovery\n");
+ ata_port_info(ap,
+ "PMP SError.N set for some ports, repeating recovery\n");
goto retry;
}
@@ -1081,9 +1077,8 @@
goto retry;
}
- ata_port_printk(ap, KERN_ERR,
- "failed to recover PMP after %d tries, giving up\n",
- ATA_EH_PMP_TRIES);
+ ata_port_err(ap, "failed to recover PMP after %d tries, giving up\n",
+ ATA_EH_PMP_TRIES);
sata_pmp_detach(pmp_dev);
ata_dev_disable(pmp_dev);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 927f968..46d087f 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1108,8 +1108,7 @@
/* configure draining */
buf = kmalloc(ATAPI_MAX_DRAIN, q->bounce_gfp | GFP_KERNEL);
if (!buf) {
- ata_dev_printk(dev, KERN_ERR,
- "drain buffer allocation failed\n");
+ ata_dev_err(dev, "drain buffer allocation failed\n");
return -ENOMEM;
}
@@ -1127,7 +1126,7 @@
* IDENTIFY_PACKET is executed as ATA_PROT_PIO.
*/
if (sdev->sector_size > PAGE_SIZE)
- ata_dev_printk(dev, KERN_WARNING,
+ ata_dev_warn(dev,
"sector_size=%u > PAGE_SIZE, PIO may malfunction\n",
sdev->sector_size);
@@ -1784,8 +1783,7 @@
if (cmd->sc_data_direction == DMA_FROM_DEVICE ||
cmd->sc_data_direction == DMA_TO_DEVICE) {
if (unlikely(scsi_bufflen(cmd) < 1)) {
- ata_dev_printk(dev, KERN_WARNING,
- "WARNING: zero len r/w req\n");
+ ata_dev_warn(dev, "WARNING: zero len r/w req\n");
goto err_did;
}
@@ -2969,9 +2967,8 @@
* with the cached multi_count of libata
*/
if (multi_count != dev->multi_count)
- ata_dev_printk(dev, KERN_WARNING,
- "invalid multi_count %u ignored\n",
- multi_count);
+ ata_dev_warn(dev, "invalid multi_count %u ignored\n",
+ multi_count);
}
/*
@@ -3466,9 +3463,8 @@
goto repeat;
}
- ata_port_printk(ap, KERN_ERR, "WARNING: synchronous SCSI scan "
- "failed without making any progress,\n"
- " switching to async\n");
+ ata_port_err(ap,
+ "WARNING: synchronous SCSI scan failed without making any progress, switching to async\n");
}
queue_delayed_work(system_long_wq, &ap->hotplug_task,
@@ -3550,8 +3546,8 @@
mutex_unlock(&ap->scsi_host->scan_mutex);
if (sdev) {
- ata_dev_printk(dev, KERN_INFO, "detaching (SCSI %s)\n",
- dev_name(&sdev->sdev_gendev));
+ ata_dev_info(dev, "detaching (SCSI %s)\n",
+ dev_name(&sdev->sdev_gendev));
scsi_remove_device(sdev);
scsi_device_put(sdev);
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index e01d5cf..996a7a5 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -227,9 +227,9 @@
}
if (status != 0xff && (status & ATA_BUSY))
- ata_port_printk(ap, KERN_WARNING,
- "port is slow to respond, please be patient "
- "(Status 0x%x)\n", status);
+ ata_port_warn(ap,
+ "port is slow to respond, please be patient (Status 0x%x)\n",
+ status);
timeout = ata_deadline(timer_start, tmout);
while (status != 0xff && (status & ATA_BUSY) &&
@@ -242,9 +242,9 @@
return -ENODEV;
if (status & ATA_BUSY) {
- ata_port_printk(ap, KERN_ERR, "port failed to respond "
- "(%lu secs, Status 0x%x)\n",
- DIV_ROUND_UP(tmout, 1000), status);
+ ata_port_err(ap,
+ "port failed to respond (%lu secs, Status 0x%x)\n",
+ DIV_ROUND_UP(tmout, 1000), status);
return -EBUSY;
}
@@ -350,8 +350,8 @@
unsigned int wait, unsigned int can_sleep)
{
if (ata_msg_probe(ap))
- ata_port_printk(ap, KERN_INFO, "ata_dev_select: ENTER, "
- "device %u, wait %u\n", device, wait);
+ ata_port_info(ap, "ata_dev_select: ENTER, device %u, wait %u\n",
+ device, wait);
if (wait)
ata_wait_idle(ap);
@@ -1335,7 +1335,7 @@
ap->hsm_task_state = HSM_ST_IDLE;
if (ata_msg_ctl(ap))
- ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __func__);
+ ata_port_dbg(ap, "%s: EXIT\n", __func__);
}
static void ata_sff_pio_task(struct work_struct *work)
@@ -1513,7 +1513,7 @@
ap->ops->sff_check_status(ap);
if (ap->ops->sff_irq_clear)
ap->ops->sff_irq_clear(ap);
- ata_port_printk(ap, KERN_WARNING, "irq trap\n");
+ ata_port_warn(ap, "irq trap\n");
return 1;
}
#endif
@@ -1711,7 +1711,7 @@
/* There was a command running, we are no longer busy and we have
no interrupt. */
- ata_port_printk(ap, KERN_WARNING, "lost interrupt (Status 0x%x)\n",
+ ata_port_warn(ap, "lost interrupt (Status 0x%x)\n",
status);
/* Run the host interrupt logic as if the interrupt had not been
lost */
@@ -1798,8 +1798,9 @@
if (!ata_link_offline(link)) {
rc = ata_sff_wait_ready(link, deadline);
if (rc && rc != -ENODEV) {
- ata_link_printk(link, KERN_WARNING, "device not ready "
- "(errno=%d), forcing hardreset\n", rc);
+ ata_link_warn(link,
+ "device not ready (errno=%d), forcing hardreset\n",
+ rc);
ehc->i.action |= ATA_EH_HARDRESET;
}
}
@@ -2056,7 +2057,7 @@
rc = ata_bus_softreset(ap, devmask, deadline);
/* if link is occupied, -ENODEV too is an error */
if (rc && (rc != -ENODEV || sata_scr_valid(link))) {
- ata_link_printk(link, KERN_ERR, "SRST failed (errno=%d)\n", rc);
+ ata_link_err(link, "SRST failed (errno=%d)\n", rc);
return rc;
}
@@ -2170,8 +2171,7 @@
/* Can become DEBUG later */
if (count)
- ata_port_printk(ap, KERN_DEBUG,
- "drained %d bytes to clear DRQ.\n", count);
+ ata_port_dbg(ap, "drained %d bytes to clear DRQ\n", count);
}
EXPORT_SYMBOL_GPL(ata_sff_drain_fifo);
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 794ec6e..cadd679 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -287,10 +287,10 @@
int print_info = ehc->i.flags & ATA_EHI_PRINTINFO;
if (print_info && adev->class == ATA_DEV_ATAPI && !ali_atapi_dma) {
- ata_dev_printk(adev, KERN_WARNING,
- "WARNING: ATAPI DMA disabled for reliability issues. It can be enabled\n");
- ata_dev_printk(adev, KERN_WARNING,
- "WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.\n");
+ ata_dev_warn(adev,
+ "WARNING: ATAPI DMA disabled for reliability issues. It can be enabled\n");
+ ata_dev_warn(adev,
+ "WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.\n");
}
}
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index b741e0f..801554d 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -311,7 +311,7 @@
cable detection result */
limit |= ata_pack_xfermask(ATA_PIO4, ATA_MWDMA2, ATA_UDMA2);
- ata_port_printk(ap, KERN_DEBUG, "nv_mode_filter: 0x%lx&0x%lx->0x%lx, "
+ ata_port_dbg(ap, "nv_mode_filter: 0x%lx&0x%lx->0x%lx, "
"BIOS=0x%lx (0x%x) ACPI=0x%lx%s\n",
xfer_mask, limit, xfer_mask & limit, bios_limit,
saved_udma, acpi_limit, acpi_str);
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index ea64967..bd987bb 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1129,7 +1129,7 @@
/* issue bus reset */
err_mask = bfin_bus_softreset(ap, devmask);
if (err_mask) {
- ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n",
+ ata_port_err(ap, "SRST failed (err_mask=0x%x)\n",
err_mask);
return -EIO;
}
@@ -1382,7 +1382,7 @@
#ifdef ATA_IRQ_TRAP
if ((ap->stats.idle_irq % 1000) == 0) {
ap->ops->irq_ack(ap, 0); /* debug trap */
- ata_port_printk(ap, KERN_WARNING, "irq trap\n");
+ ata_port_warn(ap, "irq trap\n");
return 1;
}
#endif
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index 9f2889f..52e7e7b 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -210,8 +210,8 @@
else
iomd_type = 'A', cycle = 562;
- ata_dev_printk(adev, KERN_INFO, "timings: act %dns rec %dns cyc %dns (%c)\n",
- t.active, t.recover, t.cycle, iomd_type);
+ ata_dev_info(adev, "timings: act %dns rec %dns cyc %dns (%c)\n",
+ t.active, t.recover, t.cycle, iomd_type);
state->port[ap->port_no].speed[adev->devno] = cycle;
}
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 2d15f25..56a1a77 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -473,12 +473,12 @@
/* We do need the right mode information for DMA or PIO
and this comes from the current configuration flags */
if (ata_id_has_dma(dev->id)) {
- ata_dev_printk(dev, KERN_INFO, "configured for DMA\n");
+ ata_dev_info(dev, "configured for DMA\n");
dev->xfer_mode = XFER_MW_DMA_0;
dev->xfer_shift = ATA_SHIFT_MWDMA;
dev->flags &= ~ATA_DFLAG_PIO;
} else {
- ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
+ ata_dev_info(dev, "configured for PIO\n");
dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
dev->flags |= ATA_DFLAG_PIO;
@@ -508,12 +508,12 @@
if (strstr(model_num, "Integrated Technology Express")) {
/* RAID mode */
- ata_dev_printk(adev, KERN_INFO, "%sRAID%d volume",
- adev->id[147]?"Bootable ":"",
- adev->id[129]);
+ ata_dev_info(adev, "%sRAID%d volume",
+ adev->id[147] ? "Bootable " : "",
+ adev->id[129]);
if (adev->id[129] != 1)
- printk("(%dK stripe)", adev->id[146]);
- printk(".\n");
+ pr_cont("(%dK stripe)", adev->id[146]);
+ pr_cont("\n");
}
/* This is a controller firmware triggered funny, don't
report the drive faulty! */
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index ee26835..fc424924 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -31,7 +31,7 @@
struct ata_device *dev;
ata_for_each_dev(dev, link, ENABLED) {
- ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
+ ata_dev_info(dev, "configured for PIO0\n");
dev->pio_mode = XFER_PIO_0;
dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 6bd9425..d960f8e 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -213,7 +213,7 @@
struct ata_device *dev;
ata_for_each_dev(dev, link, ENABLED) {
- ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
+ ata_dev_info(dev, "configured for PIO\n");
dev->pio_mode = XFER_PIO_0;
dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c
index d39c10b..b057e3f 100644
--- a/drivers/ata/pata_macio.c
+++ b/drivers/ata/pata_macio.c
@@ -813,7 +813,7 @@
blk_queue_update_dma_pad(sdev->request_queue, 31);
/* Tell the world about it */
- ata_dev_printk(dev, KERN_INFO, "OHare alignment limits applied\n");
+ ata_dev_info(dev, "OHare alignment limits applied\n");
return 0;
}
@@ -839,8 +839,7 @@
cmd | PCI_COMMAND_INVALIDATE);
/* Tell the world about it */
- ata_dev_printk(dev, KERN_INFO,
- "K2/Shasta alignment limits applied\n");
+ ata_dev_info(dev, "K2/Shasta alignment limits applied\n");
}
return 0;
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 220ddc9..c8707f0 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -405,7 +405,7 @@
rc = ata_sff_wait_after_reset(link, 1, deadline);
if (rc) {
- ata_link_printk(link, KERN_ERR, "SRST failed (errno=%d)\n", rc);
+ ata_link_err(link, "SRST failed (errno=%d)\n", rc);
return rc;
}
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 021abe6..a808ba0 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -68,7 +68,7 @@
the same vendor - check serial */
if (memcmp(master->id + ATA_ID_SERNO, slave->id + ATA_ID_SERNO,
ATA_ID_SERNO_LEN) == 0 && master->id[ATA_ID_SERNO] >> 8) {
- ata_dev_printk(slave, KERN_WARNING, "is a ghost device, ignoring.\n");
+ ata_dev_warn(slave, "is a ghost device, ignoring\n");
ata_dev_disable(slave);
}
}
@@ -142,8 +142,7 @@
ioread8(ap->ioaddr.data_addr);
if (count)
- ata_port_printk(ap, KERN_WARNING, "drained %d bytes to clear DRQ.\n",
- count);
+ ata_port_warn(ap, "drained %d bytes to clear DRQ\n", count);
}
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 50400fa..2067308f 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -39,7 +39,7 @@
dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
dev->flags |= ATA_DFLAG_PIO;
- ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
+ ata_dev_info(dev, "configured for PIO\n");
}
return 0;
}
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 4d04471..ed8c905 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -44,7 +44,7 @@
dev->xfer_mode = XFER_PIO_0;
dev->xfer_shift = ATA_SHIFT_PIO;
dev->flags |= ATA_DFLAG_PIO;
- ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
+ ata_dev_info(dev, "configured for PIO\n");
}
return 0;
}
diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c
index c446ae6..1b372c2 100644
--- a/drivers/ata/pata_samsung_cf.c
+++ b/drivers/ata/pata_samsung_cf.c
@@ -376,7 +376,7 @@
rc = pata_s3c_bus_softreset(ap, deadline);
/* if link is occupied, -ENODEV too is an error */
if (rc && rc != -ENODEV) {
- ata_link_printk(link, KERN_ERR, "SRST failed (errno=%d)\n", rc);
+ ata_link_err(link, "SRST failed (errno=%d)\n", rc);
return rc;
}
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 88ea9b6..a72e366 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -637,8 +637,7 @@
DPRINTK("about to softreset, devmask=%x\n", devmask);
err_mask = scc_bus_softreset(ap, devmask, deadline);
if (err_mask) {
- ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n",
- err_mask);
+ ata_port_err(ap, "SRST failed (err_mask=0x%x)\n", err_mask);
return -EIO;
}
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index ac8d7d9..74763c3 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -350,8 +350,8 @@
if (config->id == PCI_DEVICE_ID_VIA_82C586_0) {
ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num));
if (strcmp(model_num, "TS64GSSD25-M") == 0) {
- ata_dev_printk(dev, KERN_WARNING,
- "disabling UDMA mode due to reported lockups with this device.\n");
+ ata_dev_warn(dev,
+ "disabling UDMA mode due to reported lockups with this device\n");
mask &= ~ ATA_MASK_UDMA;
}
}
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 1cc70e3..78ae7b67 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -346,12 +346,11 @@
/* warn if each s/g element is not dword aligned */
if (sg_addr & 0x03)
- ata_port_printk(qc->ap, KERN_ERR,
- "s/g addr unaligned : 0x%llx\n",
- (unsigned long long)sg_addr);
+ ata_port_err(qc->ap, "s/g addr unaligned : 0x%llx\n",
+ (unsigned long long)sg_addr);
if (sg_len & 0x03)
- ata_port_printk(qc->ap, KERN_ERR,
- "s/g len unaligned : 0x%x\n", sg_len);
+ ata_port_err(qc->ap, "s/g len unaligned : 0x%x\n",
+ sg_len);
if (num_prde == (SATA_FSL_MAX_PRD_DIRECT - 1) &&
sg_next(sg) != NULL) {
@@ -739,8 +738,7 @@
1, 500);
if (temp & ONLINE) {
- ata_port_printk(ap, KERN_ERR,
- "Hardreset failed, not off-lined %d\n", i);
+ ata_port_err(ap, "Hardreset failed, not off-lined %d\n", i);
/*
* Try to offline controller atleast twice
@@ -776,8 +774,7 @@
temp = ata_wait_register(ap, hcr_base + HSTATUS, ONLINE, 0, 1, 500);
if (!(temp & ONLINE)) {
- ata_port_printk(ap, KERN_ERR,
- "Hardreset failed, not on-lined\n");
+ ata_port_err(ap, "Hardreset failed, not on-lined\n");
goto err;
}
@@ -793,9 +790,8 @@
temp = ata_wait_register(ap, hcr_base + HSTATUS, 0xFF, 0, 1, 500);
if ((!(temp & 0x10)) || ata_link_offline(link)) {
- ata_port_printk(ap, KERN_WARNING,
- "No Device OR PHYRDY change,Hstatus = 0x%x\n",
- ioread32(hcr_base + HSTATUS));
+ ata_port_warn(ap, "No Device OR PHYRDY change,Hstatus = 0x%x\n",
+ ioread32(hcr_base + HSTATUS));
*class = ATA_DEV_NONE;
return 0;
}
@@ -808,13 +804,12 @@
500, jiffies_to_msecs(deadline - start_jiffies));
if ((temp & 0xFF) != 0x18) {
- ata_port_printk(ap, KERN_WARNING, "No Signature Update\n");
+ ata_port_warn(ap, "No Signature Update\n");
*class = ATA_DEV_NONE;
goto do_followup_srst;
} else {
- ata_port_printk(ap, KERN_INFO,
- "Signature Update detected @ %d msecs\n",
- jiffies_to_msecs(jiffies - start_jiffies));
+ ata_port_info(ap, "Signature Update detected @ %d msecs\n",
+ jiffies_to_msecs(jiffies - start_jiffies));
*class = sata_fsl_dev_classify(ap);
return 0;
}
@@ -889,7 +884,7 @@
temp = ata_wait_register(ap, CQ + hcr_base, 0x1, 0x1, 1, 5000);
if (temp & 0x1) {
- ata_port_printk(ap, KERN_WARNING, "ATA_SRST issue failed\n");
+ ata_port_warn(ap, "ATA_SRST issue failed\n");
DPRINTK("Softreset@5000,CQ=0x%x,CA=0x%x,CC=0x%x\n",
ioread32(CQ + hcr_base),
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 83019e6..7a5667d 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -396,9 +396,8 @@
}
spurious:
- ata_port_printk(ap, KERN_WARNING, "unhandled interrupt: "
- "cmd=0x%x irq_stat=0x%x idma_stat=0x%x\n",
- qc ? qc->tf.command : 0xff, irq_stat, idma_stat);
+ ata_port_warn(ap, "unhandled interrupt: cmd=0x%x irq_stat=0x%x idma_stat=0x%x\n",
+ qc ? qc->tf.command : 0xff, irq_stat, idma_stat);
}
static irqreturn_t inic_interrupt(int irq, void *dev_instance)
@@ -619,8 +618,9 @@
rc = sata_link_resume(link, timing, deadline);
if (rc) {
- ata_link_printk(link, KERN_WARNING, "failed to resume "
- "link after reset (errno=%d)\n", rc);
+ ata_link_warn(link,
+ "failed to resume link after reset (errno=%d)\n",
+ rc);
return rc;
}
@@ -632,8 +632,9 @@
rc = ata_wait_after_reset(link, deadline, inic_check_ready);
/* link occupied, -ENODEV too is an error */
if (rc) {
- ata_link_printk(link, KERN_WARNING, "device not ready "
- "after hardreset (errno=%d)\n", rc);
+ ata_link_warn(link,
+ "device not ready after hardreset (errno=%d)\n",
+ rc);
return rc;
}
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index bea717a..b0e45d2 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1190,7 +1190,7 @@
break;
udelay(per_loop);
}
- /* ata_port_printk(ap, KERN_INFO, "%s: %u+ usecs\n", __func__, i); */
+ /* ata_port_info(ap, "%s: %u+ usecs\n", __func__, i); */
}
/**
@@ -1228,7 +1228,7 @@
pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
mv_wait_for_edma_empty_idle(ap);
if (mv_stop_edma_engine(port_mmio)) {
- ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n");
+ ata_port_err(ap, "Unable to stop eDMA\n");
err = -EIO;
}
mv_edma_cfg(ap, 0, 0);
@@ -1382,7 +1382,7 @@
if (adev->flags & ATA_DFLAG_NCQ) {
if (sata_pmp_attached(adev->link->ap)) {
adev->flags &= ~ATA_DFLAG_NCQ;
- ata_dev_printk(adev, KERN_INFO,
+ ata_dev_info(adev,
"NCQ disabled for command-based switching\n");
}
}
@@ -2225,9 +2225,8 @@
/* See if it worked */
if ((ifstat & 0x3000) != 0x1000) {
- ata_port_printk(ap, KERN_WARNING,
- "%s transmission error, ifstat=%08x\n",
- __func__, ifstat);
+ ata_port_warn(ap, "%s transmission error, ifstat=%08x\n",
+ __func__, ifstat);
return AC_ERR_OTHER;
}
return 0;
@@ -2342,9 +2341,9 @@
*/
if (limit_warnings > 0 && (qc->nbytes / qc->sect_size) > 1) {
--limit_warnings;
- ata_link_printk(qc->dev->link, KERN_WARNING, DRV_NAME
- ": attempting PIO w/multiple DRQ: "
- "this may fail due to h/w errata\n");
+ ata_link_warn(qc->dev->link, DRV_NAME
+ ": attempting PIO w/multiple DRQ: "
+ "this may fail due to h/w errata\n");
}
/* drop through */
case ATA_PROT_NODATA:
@@ -2499,20 +2498,20 @@
}
failed_links = hweight16(new_map);
- ata_port_printk(ap, KERN_INFO, "%s: pmp_map=%04x qc_map=%04x "
- "failed_links=%d nr_active_links=%d\n",
- __func__, pp->delayed_eh_pmp_map,
- ap->qc_active, failed_links,
- ap->nr_active_links);
+ ata_port_info(ap,
+ "%s: pmp_map=%04x qc_map=%04x failed_links=%d nr_active_links=%d\n",
+ __func__, pp->delayed_eh_pmp_map,
+ ap->qc_active, failed_links,
+ ap->nr_active_links);
if (ap->nr_active_links <= failed_links && mv_req_q_empty(ap)) {
mv_process_crpb_entries(ap, pp);
mv_stop_edma(ap);
mv_eh_freeze(ap);
- ata_port_printk(ap, KERN_INFO, "%s: done\n", __func__);
+ ata_port_info(ap, "%s: done\n", __func__);
return 1; /* handled */
}
- ata_port_printk(ap, KERN_INFO, "%s: waiting\n", __func__);
+ ata_port_info(ap, "%s: waiting\n", __func__);
return 1; /* handled */
}
@@ -2554,9 +2553,8 @@
* and we cannot handle it here.
*/
if (edma_err_cause & EDMA_ERR_SELF_DIS) {
- ata_port_printk(ap, KERN_WARNING,
- "%s: err_cause=0x%x pp_flags=0x%x\n",
- __func__, edma_err_cause, pp->pp_flags);
+ ata_port_warn(ap, "%s: err_cause=0x%x pp_flags=0x%x\n",
+ __func__, edma_err_cause, pp->pp_flags);
return 0; /* not handled */
}
return mv_handle_fbs_ncq_dev_err(ap);
@@ -2567,9 +2565,8 @@
* and we cannot handle it here.
*/
if (!(edma_err_cause & EDMA_ERR_SELF_DIS)) {
- ata_port_printk(ap, KERN_WARNING,
- "%s: err_cause=0x%x pp_flags=0x%x\n",
- __func__, edma_err_cause, pp->pp_flags);
+ ata_port_warn(ap, "%s: err_cause=0x%x pp_flags=0x%x\n",
+ __func__, edma_err_cause, pp->pp_flags);
return 0; /* not handled */
}
return mv_handle_fbs_non_ncq_dev_err(ap);
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index f215e10..b33f525 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -620,9 +620,8 @@
count++;
}
if (count == 20)
- ata_port_printk(ap, KERN_WARNING,
- "timeout waiting for ADMA IDLE, stat=0x%hx\n",
- status);
+ ata_port_warn(ap, "timeout waiting for ADMA IDLE, stat=0x%hx\n",
+ status);
tmp = readw(mmio + NV_ADMA_CTL);
writew(tmp & ~NV_ADMA_CTL_GO, mmio + NV_ADMA_CTL);
@@ -635,9 +634,9 @@
count++;
}
if (count == 20)
- ata_port_printk(ap, KERN_WARNING,
- "timeout waiting for ADMA LEGACY, stat=0x%hx\n",
- status);
+ ata_port_warn(ap,
+ "timeout waiting for ADMA LEGACY, stat=0x%hx\n",
+ status);
pp->flags |= NV_ADMA_PORT_REGISTER_MODE;
}
@@ -665,7 +664,7 @@
count++;
}
if (count == 20)
- ata_port_printk(ap, KERN_WARNING,
+ ata_port_warn(ap,
"timeout waiting for ADMA LEGACY clear and IDLE, stat=0x%hx\n",
status);
@@ -772,10 +771,10 @@
blk_queue_segment_boundary(sdev->request_queue, segment_boundary);
blk_queue_max_segments(sdev->request_queue, sg_tablesize);
- ata_port_printk(ap, KERN_INFO,
- "DMA mask 0x%llX, segment boundary 0x%lX, hw segs %hu\n",
- (unsigned long long)*ap->host->dev->dma_mask,
- segment_boundary, sg_tablesize);
+ ata_port_info(ap,
+ "DMA mask 0x%llX, segment boundary 0x%lX, hw segs %hu\n",
+ (unsigned long long)*ap->host->dev->dma_mask,
+ segment_boundary, sg_tablesize);
spin_unlock_irqrestore(ap->lock, flags);
@@ -1443,8 +1442,7 @@
existing commands. */
if (unlikely(qc->tf.protocol == ATA_PROT_NCQ &&
(qc->flags & ATA_QCFLAG_RESULT_TF))) {
- ata_dev_printk(qc->dev, KERN_ERR,
- "NCQ w/ RESULT_TF not allowed\n");
+ ata_dev_err(qc->dev, "NCQ w/ RESULT_TF not allowed\n");
return AC_ERR_SYSTEM;
}
@@ -1581,15 +1579,15 @@
int rc;
if (!(ehc->i.flags & ATA_EHI_QUIET))
- ata_link_printk(link, KERN_INFO, "nv: skipping "
- "hardreset on occupied port\n");
+ ata_link_info(link,
+ "nv: skipping hardreset on occupied port\n");
/* make sure the link is online */
rc = sata_link_resume(link, timing, deadline);
/* whine about phy resume failure but proceed */
if (rc && rc != -EOPNOTSUPP)
- ata_link_printk(link, KERN_WARNING, "failed to resume "
- "link (errno=%d)\n", rc);
+ ata_link_warn(link, "failed to resume link (errno=%d)\n",
+ rc);
}
/* device signature acquisition is unreliable */
@@ -1686,7 +1684,7 @@
u8 cpb_count = readb(mmio + NV_ADMA_CPB_COUNT);
u8 next_cpb_idx = readb(mmio + NV_ADMA_NEXT_CPB_IDX);
- ata_port_printk(ap, KERN_ERR,
+ ata_port_err(ap,
"EH in ADMA mode, notifier 0x%X "
"notifier_error 0x%X gen_ctl 0x%X status 0x%X "
"next cpb count 0x%X next cpb idx 0x%x\n",
@@ -1697,7 +1695,7 @@
struct nv_adma_cpb *cpb = &pp->cpb[i];
if ((ata_tag_valid(ap->link.active_tag) && i == ap->link.active_tag) ||
ap->link.sactive & (1 << i))
- ata_port_printk(ap, KERN_ERR,
+ ata_port_err(ap,
"CPB %d: ctl_flags 0x%x, resp_flags 0x%x\n",
i, cpb->ctl_flags, cpb->resp_flags);
}
@@ -1799,23 +1797,22 @@
u32 sactive;
u32 done_mask;
- ata_port_printk(ap, KERN_ERR,
- "EH in SWNCQ mode,QC:qc_active 0x%X sactive 0x%X\n",
- ap->qc_active, ap->link.sactive);
- ata_port_printk(ap, KERN_ERR,
+ ata_port_err(ap, "EH in SWNCQ mode,QC:qc_active 0x%X sactive 0x%X\n",
+ ap->qc_active, ap->link.sactive);
+ ata_port_err(ap,
"SWNCQ:qc_active 0x%X defer_bits 0x%X last_issue_tag 0x%x\n "
"dhfis 0x%X dmafis 0x%X sdbfis 0x%X\n",
pp->qc_active, pp->defer_queue.defer_bits, pp->last_issue_tag,
pp->dhfis_bits, pp->dmafis_bits, pp->sdbfis_bits);
- ata_port_printk(ap, KERN_ERR, "ATA_REG 0x%X ERR_REG 0x%X\n",
- ap->ops->sff_check_status(ap),
- ioread8(ap->ioaddr.error_addr));
+ ata_port_err(ap, "ATA_REG 0x%X ERR_REG 0x%X\n",
+ ap->ops->sff_check_status(ap),
+ ioread8(ap->ioaddr.error_addr));
sactive = readl(pp->sactive_block);
done_mask = pp->qc_active ^ sactive;
- ata_port_printk(ap, KERN_ERR, "tag : dhfis dmafis sdbfis sacitve\n");
+ ata_port_err(ap, "tag : dhfis dmafis sdbfis sactive\n");
for (i = 0; i < ATA_MAX_QUEUE; i++) {
u8 err = 0;
if (pp->qc_active & (1 << i))
@@ -1825,13 +1822,13 @@
else
continue;
- ata_port_printk(ap, KERN_ERR,
- "tag 0x%x: %01x %01x %01x %01x %s\n", i,
- (pp->dhfis_bits >> i) & 0x1,
- (pp->dmafis_bits >> i) & 0x1,
- (pp->sdbfis_bits >> i) & 0x1,
- (sactive >> i) & 0x1,
- (err ? "error! tag doesn't exit" : " "));
+ ata_port_err(ap,
+ "tag 0x%x: %01x %01x %01x %01x %s\n", i,
+ (pp->dhfis_bits >> i) & 0x1,
+ (pp->dmafis_bits >> i) & 0x1,
+ (pp->sdbfis_bits >> i) & 0x1,
+ (sactive >> i) & 0x1,
+ (err ? "error! tag doesn't exit" : " "));
}
nv_swncq_pp_reinit(ap);
@@ -1956,8 +1953,8 @@
if (strncmp(model_num, "Maxtor", 6) == 0) {
ata_scsi_change_queue_depth(sdev, 1, SCSI_QDEPTH_DEFAULT);
- ata_dev_printk(dev, KERN_NOTICE,
- "Disabling SWNCQ mode (depth %x)\n", sdev->queue_depth);
+ ata_dev_notice(dev, "Disabling SWNCQ mode (depth %x)\n",
+ sdev->queue_depth);
}
return rc;
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index fe16ee8..280ba8a 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -643,8 +643,8 @@
((ap->flags & SIL_FLAG_MOD15WRITE) &&
(quirks & SIL_QUIRK_MOD15WRITE))) {
if (print_info)
- ata_dev_printk(dev, KERN_INFO, "applying Seagate "
- "errata fix (mod15write workaround)\n");
+ ata_dev_info(dev,
+ "applying Seagate errata fix (mod15write workaround)\n");
dev->max_sectors = 15;
return;
}
@@ -652,8 +652,8 @@
/* limit to udma5 */
if (quirks & SIL_QUIRK_UDMA5MAX) {
if (print_info)
- ata_dev_printk(dev, KERN_INFO, "applying Maxtor "
- "errata fix %s\n", model_num);
+ ata_dev_info(dev, "applying Maxtor errata fix %s\n",
+ model_num);
dev->udma_mask &= ATA_UDMA5;
return;
}
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 164d52e..792e936 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -694,7 +694,7 @@
return 0;
err:
- ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason);
+ ata_link_err(link, "softreset failed (%s)\n", reason);
return -EIO;
}
@@ -714,8 +714,8 @@
* This happens often after PM DMA CS errata.
*/
if (pp->do_port_rst) {
- ata_port_printk(ap, KERN_WARNING, "controller in dubious "
- "state, performing PORT_RST\n");
+ ata_port_warn(ap,
+ "controller in dubious state, performing PORT_RST\n");
writel(PORT_CS_PORT_RST, port + PORT_CTRL_STAT);
ata_msleep(ap, 10);
@@ -773,7 +773,7 @@
goto retry;
}
- ata_link_printk(link, KERN_ERR, "hardreset failed (%s)\n", reason);
+ ata_link_err(link, "hardreset failed (%s)\n", reason);
return -EIO;
}
@@ -925,7 +925,7 @@
if (sata_pmp_gscr_vendor(gscr) == 0x11ab &&
sata_pmp_gscr_devid(gscr) == 0x4140) {
- ata_port_printk(ap, KERN_INFO,
+ ata_port_info(ap,
"disabling NCQ support due to sil24-mv4140 quirk\n");
ap->flags &= ~ATA_FLAG_NCQ;
}
@@ -946,8 +946,7 @@
rc = sil24_init_port(link->ap);
if (rc) {
- ata_link_printk(link, KERN_ERR,
- "hardreset failed (port not ready)\n");
+ ata_link_err(link, "hardreset failed (port not ready)\n");
return rc;
}
@@ -1141,8 +1140,8 @@
/* spurious interrupts are expected if PCIX_IRQ_WOC */
if (!(ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) && ata_ratelimit())
- ata_port_printk(ap, KERN_INFO, "spurious interrupt "
- "(slot_stat 0x%x active_tag %d sactive 0x%x)\n",
+ ata_port_info(ap,
+ "spurious interrupt (slot_stat 0x%x active_tag %d sactive 0x%x)\n",
slot_stat, ap->link.active_tag, ap->link.sactive);
}
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 9b43ccb..0fc1582 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -360,9 +360,9 @@
online = (sstatus & 0xf) == 0x3;
- ata_port_printk(ap, KERN_INFO,
- "SATA link %s 1.5 Gbps (SStatus %X SControl %X)\n",
- online ? "up" : "down", sstatus, scontrol);
+ ata_port_info(ap,
+ "SATA link %s 1.5 Gbps (SStatus %X SControl %X)\n",
+ online ? "up" : "down", sstatus, scontrol);
/* SStatus is read one more time */
svia_scr_read(link, SCR_STATUS, &sstatus);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 5a9926b..4e72a6a 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1244,20 +1244,48 @@
/*
* printk helpers
*/
-#define ata_port_printk(ap, lv, fmt, args...) \
- printk("%sata%u: "fmt, lv, (ap)->print_id , ##args)
+__attribute__((format (printf, 3, 4)))
+int ata_port_printk(const struct ata_port *ap, const char *level,
+ const char *fmt, ...);
+__attribute__((format (printf, 3, 4)))
+int ata_link_printk(const struct ata_link *link, const char *level,
+ const char *fmt, ...);
+__attribute__((format (printf, 3, 4)))
+int ata_dev_printk(const struct ata_device *dev, const char *level,
+ const char *fmt, ...);
-#define ata_link_printk(link, lv, fmt, args...) do { \
- if (sata_pmp_attached((link)->ap) || (link)->ap->slave_link) \
- printk("%sata%u.%02u: "fmt, lv, (link)->ap->print_id, \
- (link)->pmp , ##args); \
- else \
- printk("%sata%u: "fmt, lv, (link)->ap->print_id , ##args); \
- } while(0)
+#define ata_port_err(ap, fmt, ...) \
+ ata_port_printk(ap, KERN_ERR, fmt, ##__VA_ARGS__)
+#define ata_port_warn(ap, fmt, ...) \
+ ata_port_printk(ap, KERN_WARNING, fmt, ##__VA_ARGS__)
+#define ata_port_notice(ap, fmt, ...) \
+ ata_port_printk(ap, KERN_NOTICE, fmt, ##__VA_ARGS__)
+#define ata_port_info(ap, fmt, ...) \
+ ata_port_printk(ap, KERN_INFO, fmt, ##__VA_ARGS__)
+#define ata_port_dbg(ap, fmt, ...) \
+ ata_port_printk(ap, KERN_DEBUG, fmt, ##__VA_ARGS__)
-#define ata_dev_printk(dev, lv, fmt, args...) \
- printk("%sata%u.%02u: "fmt, lv, (dev)->link->ap->print_id, \
- (dev)->link->pmp + (dev)->devno , ##args)
+#define ata_link_err(link, fmt, ...) \
+ ata_link_printk(link, KERN_ERR, fmt, ##__VA_ARGS__)
+#define ata_link_warn(link, fmt, ...) \
+ ata_link_printk(link, KERN_WARNING, fmt, ##__VA_ARGS__)
+#define ata_link_notice(link, fmt, ...) \
+ ata_link_printk(link, KERN_NOTICE, fmt, ##__VA_ARGS__)
+#define ata_link_info(link, fmt, ...) \
+ ata_link_printk(link, KERN_INFO, fmt, ##__VA_ARGS__)
+#define ata_link_dbg(link, fmt, ...) \
+ ata_link_printk(link, KERN_DEBUG, fmt, ##__VA_ARGS__)
+
+#define ata_dev_err(dev, fmt, ...) \
+ ata_dev_printk(dev, KERN_ERR, fmt, ##__VA_ARGS__)
+#define ata_dev_warn(dev, fmt, ...) \
+ ata_dev_printk(dev, KERN_WARNING, fmt, ##__VA_ARGS__)
+#define ata_dev_notice(dev, fmt, ...) \
+ ata_dev_printk(dev, KERN_NOTICE, fmt, ##__VA_ARGS__)
+#define ata_dev_info(dev, fmt, ...) \
+ ata_dev_printk(dev, KERN_INFO, fmt, ##__VA_ARGS__)
+#define ata_dev_dbg(dev, fmt, ...) \
+ ata_dev_printk(dev, KERN_DEBUG, fmt, ##__VA_ARGS__)
/*
* ata_eh_info helpers
