Merge tag 'soc-fsl-next-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers
NXP/FSL SoC driver updates for v5.6
QUICC Engine drivers
- Improve the QE drivers to be compatible with ARM/ARM64/PPC64
architectures
- Various cleanups to the QE drivers
* tag 'soc-fsl-next-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: (49 commits)
soc: fsl: qe: remove set but not used variable 'mm_gc'
soc: fsl: qe: remove PPC32 dependency from CONFIG_QUICC_ENGINE
soc: fsl: qe: remove unused #include of asm/irq.h from ucc.c
net: ethernet: freescale: make UCC_GETH explicitly depend on PPC32
net/wan/fsl_ucc_hdlc: reject muram offsets above 64K
net/wan/fsl_ucc_hdlc: fix reading of __be16 registers
net/wan/fsl_ucc_hdlc: avoid use of IS_ERR_VALUE()
soc: fsl: qe: avoid IS_ERR_VALUE in ucc_fast.c
soc: fsl: qe: drop pointless check in qe_sdma_init()
soc: fsl: qe: drop use of IS_ERR_VALUE in qe_sdma_init()
soc: fsl: qe: avoid IS_ERR_VALUE in ucc_slow.c
soc: fsl: qe: refactor cpm_muram_alloc_common to prevent BUG on error path
soc: fsl: qe: drop broken lazy call of cpm_muram_init()
soc: fsl: qe: make cpm_muram_free() ignore a negative offset
soc: fsl: qe: make cpm_muram_free() return void
soc: fsl: qe: change return type of cpm_muram_alloc() to s32
serial: ucc_uart: access __be32 field using be32_to_cpu
serial: ucc_uart: limit brg-frequency workaround to PPC32
serial: ucc_uart: use of_property_read_u32() in ucc_uart_probe()
serial: ucc_uart: stub out soft_uart_init for !CONFIG_PPC32
...
Link: https://lore.kernel.org/r/1578608351-23289-1-git-send-email-leoyang.li@nxp.com
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h
index 4c24ea8..ce483b0f 100644
--- a/arch/powerpc/include/asm/cpm.h
+++ b/arch/powerpc/include/asm/cpm.h
@@ -1,171 +1 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __CPM_H
-#define __CPM_H
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/of.h>
-#include <soc/fsl/qe/qe.h>
-
-/*
- * SPI Parameter RAM common to QE and CPM.
- */
-struct spi_pram {
- __be16 rbase; /* Rx Buffer descriptor base address */
- __be16 tbase; /* Tx Buffer descriptor base address */
- u8 rfcr; /* Rx function code */
- u8 tfcr; /* Tx function code */
- __be16 mrblr; /* Max receive buffer length */
- __be32 rstate; /* Internal */
- __be32 rdp; /* Internal */
- __be16 rbptr; /* Internal */
- __be16 rbc; /* Internal */
- __be32 rxtmp; /* Internal */
- __be32 tstate; /* Internal */
- __be32 tdp; /* Internal */
- __be16 tbptr; /* Internal */
- __be16 tbc; /* Internal */
- __be32 txtmp; /* Internal */
- __be32 res; /* Tx temp. */
- __be16 rpbase; /* Relocation pointer (CPM1 only) */
- __be16 res1; /* Reserved */
-};
-
-/*
- * USB Controller pram common to QE and CPM.
- */
-struct usb_ctlr {
- u8 usb_usmod;
- u8 usb_usadr;
- u8 usb_uscom;
- u8 res1[1];
- __be16 usb_usep[4];
- u8 res2[4];
- __be16 usb_usber;
- u8 res3[2];
- __be16 usb_usbmr;
- u8 res4[1];
- u8 usb_usbs;
- /* Fields down below are QE-only */
- __be16 usb_ussft;
- u8 res5[2];
- __be16 usb_usfrn;
- u8 res6[0x22];
-} __attribute__ ((packed));
-
-/*
- * Function code bits, usually generic to devices.
- */
-#ifdef CONFIG_CPM1
-#define CPMFCR_GBL ((u_char)0x00) /* Flag doesn't exist in CPM1 */
-#define CPMFCR_TC2 ((u_char)0x00) /* Flag doesn't exist in CPM1 */
-#define CPMFCR_DTB ((u_char)0x00) /* Flag doesn't exist in CPM1 */
-#define CPMFCR_BDB ((u_char)0x00) /* Flag doesn't exist in CPM1 */
-#else
-#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */
-#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */
-#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */
-#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */
-#endif
-#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */
-
-/* Opcodes common to CPM1 and CPM2
-*/
-#define CPM_CR_INIT_TRX ((ushort)0x0000)
-#define CPM_CR_INIT_RX ((ushort)0x0001)
-#define CPM_CR_INIT_TX ((ushort)0x0002)
-#define CPM_CR_HUNT_MODE ((ushort)0x0003)
-#define CPM_CR_STOP_TX ((ushort)0x0004)
-#define CPM_CR_GRA_STOP_TX ((ushort)0x0005)
-#define CPM_CR_RESTART_TX ((ushort)0x0006)
-#define CPM_CR_CLOSE_RX_BD ((ushort)0x0007)
-#define CPM_CR_SET_GADDR ((ushort)0x0008)
-#define CPM_CR_SET_TIMER ((ushort)0x0008)
-#define CPM_CR_STOP_IDMA ((ushort)0x000b)
-
-/* Buffer descriptors used by many of the CPM protocols. */
-typedef struct cpm_buf_desc {
- ushort cbd_sc; /* Status and Control */
- ushort cbd_datlen; /* Data length in buffer */
- uint cbd_bufaddr; /* Buffer address in host memory */
-} cbd_t;
-
-/* Buffer descriptor control/status used by serial
- */
-
-#define BD_SC_EMPTY (0x8000) /* Receive is empty */
-#define BD_SC_READY (0x8000) /* Transmit is ready */
-#define BD_SC_WRAP (0x2000) /* Last buffer descriptor */
-#define BD_SC_INTRPT (0x1000) /* Interrupt on change */
-#define BD_SC_LAST (0x0800) /* Last buffer in frame */
-#define BD_SC_TC (0x0400) /* Transmit CRC */
-#define BD_SC_CM (0x0200) /* Continuous mode */
-#define BD_SC_ID (0x0100) /* Rec'd too many idles */
-#define BD_SC_P (0x0100) /* xmt preamble */
-#define BD_SC_BR (0x0020) /* Break received */
-#define BD_SC_FR (0x0010) /* Framing error */
-#define BD_SC_PR (0x0008) /* Parity error */
-#define BD_SC_NAK (0x0004) /* NAK - did not respond */
-#define BD_SC_OV (0x0002) /* Overrun */
-#define BD_SC_UN (0x0002) /* Underrun */
-#define BD_SC_CD (0x0001) /* */
-#define BD_SC_CL (0x0001) /* Collision */
-
-/* Buffer descriptor control/status used by Ethernet receive.
- * Common to SCC and FCC.
- */
-#define BD_ENET_RX_EMPTY (0x8000)
-#define BD_ENET_RX_WRAP (0x2000)
-#define BD_ENET_RX_INTR (0x1000)
-#define BD_ENET_RX_LAST (0x0800)
-#define BD_ENET_RX_FIRST (0x0400)
-#define BD_ENET_RX_MISS (0x0100)
-#define BD_ENET_RX_BC (0x0080) /* FCC Only */
-#define BD_ENET_RX_MC (0x0040) /* FCC Only */
-#define BD_ENET_RX_LG (0x0020)
-#define BD_ENET_RX_NO (0x0010)
-#define BD_ENET_RX_SH (0x0008)
-#define BD_ENET_RX_CR (0x0004)
-#define BD_ENET_RX_OV (0x0002)
-#define BD_ENET_RX_CL (0x0001)
-#define BD_ENET_RX_STATS (0x01ff) /* All status bits */
-
-/* Buffer descriptor control/status used by Ethernet transmit.
- * Common to SCC and FCC.
- */
-#define BD_ENET_TX_READY (0x8000)
-#define BD_ENET_TX_PAD (0x4000)
-#define BD_ENET_TX_WRAP (0x2000)
-#define BD_ENET_TX_INTR (0x1000)
-#define BD_ENET_TX_LAST (0x0800)
-#define BD_ENET_TX_TC (0x0400)
-#define BD_ENET_TX_DEF (0x0200)
-#define BD_ENET_TX_HB (0x0100)
-#define BD_ENET_TX_LC (0x0080)
-#define BD_ENET_TX_RL (0x0040)
-#define BD_ENET_TX_RCMASK (0x003c)
-#define BD_ENET_TX_UN (0x0002)
-#define BD_ENET_TX_CSL (0x0001)
-#define BD_ENET_TX_STATS (0x03ff) /* All status bits */
-
-/* Buffer descriptor control/status used by Transparent mode SCC.
- */
-#define BD_SCC_TX_LAST (0x0800)
-
-/* Buffer descriptor control/status used by I2C.
- */
-#define BD_I2C_START (0x0400)
-
-#ifdef CONFIG_CPM
-int cpm_command(u32 command, u8 opcode);
-#else
-static inline int cpm_command(u32 command, u8 opcode)
-{
- return -ENOSYS;
-}
-#endif /* CONFIG_CPM */
-
-int cpm2_gpiochip_add32(struct device *dev);
-
-#endif
+#include <soc/fsl/cpm.h>
diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c
index 273145a..3d89569 100644
--- a/arch/powerpc/platforms/83xx/km83xx.c
+++ b/arch/powerpc/platforms/83xx/km83xx.c
@@ -34,7 +34,6 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include <soc/fsl/qe/qe.h>
-#include <soc/fsl/qe/qe_ic.h>
#include "mpc83xx.h"
@@ -178,7 +177,7 @@ define_machine(mpc83xx_km) {
.name = "mpc83xx-km-platform",
.probe = mpc83xx_km_probe,
.setup_arch = mpc83xx_km_setup_arch,
- .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c
index 6399865..a952e91 100644
--- a/arch/powerpc/platforms/83xx/misc.c
+++ b/arch/powerpc/platforms/83xx/misc.c
@@ -14,7 +14,6 @@
#include <asm/io.h>
#include <asm/hw_irq.h>
#include <asm/ipic.h>
-#include <soc/fsl/qe/qe_ic.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
@@ -91,28 +90,6 @@ void __init mpc83xx_ipic_init_IRQ(void)
ipic_set_default_priority();
}
-#ifdef CONFIG_QUICC_ENGINE
-void __init mpc83xx_qe_init_IRQ(void)
-{
- struct device_node *np;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
- if (!np) {
- np = of_find_node_by_type(NULL, "qeic");
- if (!np)
- return;
- }
- qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
- of_node_put(np);
-}
-
-void __init mpc83xx_ipic_and_qe_init_IRQ(void)
-{
- mpc83xx_ipic_init_IRQ();
- mpc83xx_qe_init_IRQ();
-}
-#endif /* CONFIG_QUICC_ENGINE */
-
static const struct of_device_id of_bus_ids[] __initconst = {
{ .type = "soc", },
{ .compatible = "soc", },
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index b428835..6fa5402e 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -33,7 +33,6 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include <soc/fsl/qe/qe.h>
-#include <soc/fsl/qe/qe_ic.h>
#include "mpc83xx.h"
@@ -102,7 +101,7 @@ define_machine(mpc832x_mds) {
.name = "MPC832x MDS",
.probe = mpc832x_sys_probe,
.setup_arch = mpc832x_sys_setup_arch,
- .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index 4588ce6..622c625 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -22,7 +22,6 @@
#include <asm/ipic.h>
#include <asm/udbg.h>
#include <soc/fsl/qe/qe.h>
-#include <soc/fsl/qe/qe_ic.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
@@ -220,7 +219,7 @@ define_machine(mpc832x_rdb) {
.name = "MPC832x RDB",
.probe = mpc832x_rdb_probe,
.setup_arch = mpc832x_rdb_setup_arch,
- .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index 240a26d..90d9cbf 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -40,7 +40,6 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include <soc/fsl/qe/qe.h>
-#include <soc/fsl/qe/qe_ic.h>
#include "mpc83xx.h"
@@ -202,7 +201,7 @@ define_machine(mpc836x_mds) {
.name = "MPC836x MDS",
.probe = mpc836x_mds_probe,
.setup_arch = mpc836x_mds_setup_arch,
- .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
index 9923059..b4aac2c 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_rdk.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -17,7 +17,6 @@
#include <asm/ipic.h>
#include <asm/udbg.h>
#include <soc/fsl/qe/qe.h>
-#include <soc/fsl/qe/qe_ic.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
@@ -42,7 +41,7 @@ define_machine(mpc836x_rdk) {
.name = "MPC836x RDK",
.probe = mpc836x_rdk_probe,
.setup_arch = mpc836x_rdk_setup_arch,
- .init_IRQ = mpc83xx_ipic_and_qe_init_IRQ,
+ .init_IRQ = mpc83xx_ipic_init_IRQ,
.get_irq = ipic_get_irq,
.restart = mpc83xx_restart,
.time_init = mpc83xx_time_init,
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 4591456..f37d043 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -72,13 +72,6 @@ extern int mpc837x_usb_cfg(void);
extern int mpc834x_usb_cfg(void);
extern int mpc831x_usb_cfg(void);
extern void mpc83xx_ipic_init_IRQ(void);
-#ifdef CONFIG_QUICC_ENGINE
-extern void mpc83xx_qe_init_IRQ(void);
-extern void mpc83xx_ipic_and_qe_init_IRQ(void);
-#else
-static inline void __init mpc83xx_qe_init_IRQ(void) {}
-#define mpc83xx_ipic_and_qe_init_IRQ mpc83xx_ipic_init_IRQ
-#endif /* CONFIG_QUICC_ENGINE */
#ifdef CONFIG_PCI
extern void mpc83xx_setup_pci(void);
diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
index a328a74..27ac38f 100644
--- a/arch/powerpc/platforms/85xx/corenet_generic.c
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -24,7 +24,6 @@
#include <asm/mpic.h>
#include <asm/ehv_pic.h>
#include <asm/swiotlb.h>
-#include <soc/fsl/qe/qe_ic.h>
#include <linux/of_platform.h>
#include <sysdev/fsl_soc.h>
@@ -38,8 +37,6 @@ void __init corenet_gen_pic_init(void)
unsigned int flags = MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU |
MPIC_NO_RESET;
- struct device_node *np;
-
if (ppc_md.get_irq == mpic_get_coreint_irq)
flags |= MPIC_ENABLE_COREINT;
@@ -47,13 +44,6 @@ void __init corenet_gen_pic_init(void)
BUG_ON(mpic == NULL);
mpic_init(mpic);
-
- np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
- if (np) {
- qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
- qe_ic_cascade_high_mpic);
- of_node_put(np);
- }
}
/*
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 381a6ac..7759eca 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -44,7 +44,6 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include <soc/fsl/qe/qe.h>
-#include <soc/fsl/qe/qe_ic.h>
#include <asm/mpic.h>
#include <asm/swiotlb.h>
#include "smp.h"
@@ -268,33 +267,8 @@ static void __init mpc85xx_mds_qe_init(void)
}
}
-static void __init mpc85xx_mds_qeic_init(void)
-{
- struct device_node *np;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,qe");
- if (!of_device_is_available(np)) {
- of_node_put(np);
- return;
- }
-
- np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
- if (!np) {
- np = of_find_node_by_type(NULL, "qeic");
- if (!np)
- return;
- }
-
- if (machine_is(p1021_mds))
- qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
- qe_ic_cascade_high_mpic);
- else
- qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
- of_node_put(np);
-}
#else
static void __init mpc85xx_mds_qe_init(void) { }
-static void __init mpc85xx_mds_qeic_init(void) { }
#endif /* CONFIG_QUICC_ENGINE */
static void __init mpc85xx_mds_setup_arch(void)
@@ -364,7 +338,6 @@ static void __init mpc85xx_mds_pic_init(void)
BUG_ON(mpic == NULL);
mpic_init(mpic);
- mpc85xx_mds_qeic_init();
}
static int __init mpc85xx_mds_probe(void)
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index 7f9a84f..80a8017 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -23,7 +23,6 @@
#include <asm/udbg.h>
#include <asm/mpic.h>
#include <soc/fsl/qe/qe.h>
-#include <soc/fsl/qe/qe_ic.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
@@ -44,10 +43,6 @@ void __init mpc85xx_rdb_pic_init(void)
{
struct mpic *mpic;
-#ifdef CONFIG_QUICC_ENGINE
- struct device_node *np;
-#endif
-
if (of_machine_is_compatible("fsl,MPC85XXRDB-CAMP")) {
mpic = mpic_alloc(NULL, 0, MPIC_NO_RESET |
MPIC_BIG_ENDIAN |
@@ -62,18 +57,6 @@ void __init mpc85xx_rdb_pic_init(void)
BUG_ON(mpic == NULL);
mpic_init(mpic);
-
-#ifdef CONFIG_QUICC_ENGINE
- np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
- if (np) {
- qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
- qe_ic_cascade_high_mpic);
- of_node_put(np);
-
- } else
- pr_err("%s: Could not find qe-ic node\n", __func__);
-#endif
-
}
/*
diff --git a/arch/powerpc/platforms/85xx/twr_p102x.c b/arch/powerpc/platforms/85xx/twr_p102x.c
index 6c3c0cd..9abb1e9 100644
--- a/arch/powerpc/platforms/85xx/twr_p102x.c
+++ b/arch/powerpc/platforms/85xx/twr_p102x.c
@@ -19,7 +19,6 @@
#include <asm/udbg.h>
#include <asm/mpic.h>
#include <soc/fsl/qe/qe.h>
-#include <soc/fsl/qe/qe_ic.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
@@ -31,26 +30,12 @@ static void __init twr_p1025_pic_init(void)
{
struct mpic *mpic;
-#ifdef CONFIG_QUICC_ENGINE
- struct device_node *np;
-#endif
-
mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
mpic_init(mpic);
-
-#ifdef CONFIG_QUICC_ENGINE
- np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
- if (np) {
- qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
- qe_ic_cascade_high_mpic);
- of_node_put(np);
- } else
- pr_err("Could not find qe-ic node\n");
-#endif
}
/* ************************************************************************
diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig
index 6a7e899..2bd7ace 100644
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -74,7 +74,7 @@
config UCC_GETH
tristate "Freescale QE Gigabit Ethernet"
- depends on QUICC_ENGINE
+ depends on QUICC_ENGINE && PPC32
select FSL_PQ_MDIO
select PHYLIB
---help---
diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c
index ca0f3be..f029eaa7 100644
--- a/drivers/net/wan/fsl_ucc_hdlc.c
+++ b/drivers/net/wan/fsl_ucc_hdlc.c
@@ -84,8 +84,8 @@ static int uhdlc_init(struct ucc_hdlc_private *priv)
int ret, i;
void *bd_buffer;
dma_addr_t bd_dma_addr;
- u32 riptr;
- u32 tiptr;
+ s32 riptr;
+ s32 tiptr;
u32 gumr;
ut_info = priv->ut_info;
@@ -195,7 +195,7 @@ static int uhdlc_init(struct ucc_hdlc_private *priv)
priv->ucc_pram_offset = qe_muram_alloc(sizeof(struct ucc_hdlc_param),
ALIGNMENT_OF_UCC_HDLC_PRAM);
- if (IS_ERR_VALUE(priv->ucc_pram_offset)) {
+ if (priv->ucc_pram_offset < 0) {
dev_err(priv->dev, "Can not allocate MURAM for hdlc parameter.\n");
ret = -ENOMEM;
goto free_tx_bd;
@@ -233,18 +233,23 @@ static int uhdlc_init(struct ucc_hdlc_private *priv)
/* Alloc riptr, tiptr */
riptr = qe_muram_alloc(32, 32);
- if (IS_ERR_VALUE(riptr)) {
+ if (riptr < 0) {
dev_err(priv->dev, "Cannot allocate MURAM mem for Receive internal temp data pointer\n");
ret = -ENOMEM;
goto free_tx_skbuff;
}
tiptr = qe_muram_alloc(32, 32);
- if (IS_ERR_VALUE(tiptr)) {
+ if (tiptr < 0) {
dev_err(priv->dev, "Cannot allocate MURAM mem for Transmit internal temp data pointer\n");
ret = -ENOMEM;
goto free_riptr;
}
+ if (riptr != (u16)riptr || tiptr != (u16)tiptr) {
+ dev_err(priv->dev, "MURAM allocation out of addressable range\n");
+ ret = -ENOMEM;
+ goto free_tiptr;
+ }
/* Set RIPTR, TIPTR */
iowrite16be(riptr, &priv->ucc_pram->riptr);
@@ -623,8 +628,8 @@ static int ucc_hdlc_poll(struct napi_struct *napi, int budget)
if (howmany < budget) {
napi_complete_done(napi, howmany);
- qe_setbits32(priv->uccf->p_uccm,
- (UCCE_HDLC_RX_EVENTS | UCCE_HDLC_TX_EVENTS) << 16);
+ qe_setbits_be32(priv->uccf->p_uccm,
+ (UCCE_HDLC_RX_EVENTS | UCCE_HDLC_TX_EVENTS) << 16);
}
return howmany;
@@ -732,8 +737,8 @@ static int uhdlc_open(struct net_device *dev)
static void uhdlc_memclean(struct ucc_hdlc_private *priv)
{
- qe_muram_free(priv->ucc_pram->riptr);
- qe_muram_free(priv->ucc_pram->tiptr);
+ qe_muram_free(ioread16be(&priv->ucc_pram->riptr));
+ qe_muram_free(ioread16be(&priv->ucc_pram->tiptr));
if (priv->rx_bd_base) {
dma_free_coherent(priv->dev,
diff --git a/drivers/net/wan/fsl_ucc_hdlc.h b/drivers/net/wan/fsl_ucc_hdlc.h
index 8b3507a..71d5ad0 100644
--- a/drivers/net/wan/fsl_ucc_hdlc.h
+++ b/drivers/net/wan/fsl_ucc_hdlc.h
@@ -98,7 +98,7 @@ struct ucc_hdlc_private {
unsigned short tx_ring_size;
unsigned short rx_ring_size;
- u32 ucc_pram_offset;
+ s32 ucc_pram_offset;
unsigned short encoding;
unsigned short parity;
diff --git a/drivers/soc/fsl/qe/Kconfig b/drivers/soc/fsl/qe/Kconfig
index cfa4b29..357c580 100644
--- a/drivers/soc/fsl/qe/Kconfig
+++ b/drivers/soc/fsl/qe/Kconfig
@@ -5,7 +5,8 @@
config QUICC_ENGINE
bool "QUICC Engine (QE) framework support"
- depends on FSL_SOC && PPC32
+ depends on OF && HAS_IOMEM
+ depends on PPC || ARM || ARM64 || COMPILE_TEST
select GENERIC_ALLOCATOR
select CRC32
help
diff --git a/drivers/soc/fsl/qe/gpio.c b/drivers/soc/fsl/qe/gpio.c
index f0c29ed8..ed75198 100644
--- a/drivers/soc/fsl/qe/gpio.c
+++ b/drivers/soc/fsl/qe/gpio.c
@@ -41,13 +41,13 @@ static void qe_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
container_of(mm_gc, struct qe_gpio_chip, mm_gc);
struct qe_pio_regs __iomem *regs = mm_gc->regs;
- qe_gc->cpdata = in_be32(®s->cpdata);
+ qe_gc->cpdata = qe_ioread32be(®s->cpdata);
qe_gc->saved_regs.cpdata = qe_gc->cpdata;
- qe_gc->saved_regs.cpdir1 = in_be32(®s->cpdir1);
- qe_gc->saved_regs.cpdir2 = in_be32(®s->cpdir2);
- qe_gc->saved_regs.cppar1 = in_be32(®s->cppar1);
- qe_gc->saved_regs.cppar2 = in_be32(®s->cppar2);
- qe_gc->saved_regs.cpodr = in_be32(®s->cpodr);
+ qe_gc->saved_regs.cpdir1 = qe_ioread32be(®s->cpdir1);
+ qe_gc->saved_regs.cpdir2 = qe_ioread32be(®s->cpdir2);
+ qe_gc->saved_regs.cppar1 = qe_ioread32be(®s->cppar1);
+ qe_gc->saved_regs.cppar2 = qe_ioread32be(®s->cppar2);
+ qe_gc->saved_regs.cpodr = qe_ioread32be(®s->cpodr);
}
static int qe_gpio_get(struct gpio_chip *gc, unsigned int gpio)
@@ -56,7 +56,7 @@ static int qe_gpio_get(struct gpio_chip *gc, unsigned int gpio)
struct qe_pio_regs __iomem *regs = mm_gc->regs;
u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
- return !!(in_be32(®s->cpdata) & pin_mask);
+ return !!(qe_ioread32be(®s->cpdata) & pin_mask);
}
static void qe_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
@@ -74,7 +74,7 @@ static void qe_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
else
qe_gc->cpdata &= ~pin_mask;
- out_be32(®s->cpdata, qe_gc->cpdata);
+ qe_iowrite32be(qe_gc->cpdata, ®s->cpdata);
spin_unlock_irqrestore(&qe_gc->lock, flags);
}
@@ -101,7 +101,7 @@ static void qe_gpio_set_multiple(struct gpio_chip *gc,
}
}
- out_be32(®s->cpdata, qe_gc->cpdata);
+ qe_iowrite32be(qe_gc->cpdata, ®s->cpdata);
spin_unlock_irqrestore(&qe_gc->lock, flags);
}
@@ -160,7 +160,6 @@ struct qe_pin *qe_pin_request(struct device_node *np, int index)
{
struct qe_pin *qe_pin;
struct gpio_chip *gc;
- struct of_mm_gpio_chip *mm_gc;
struct qe_gpio_chip *qe_gc;
int err;
unsigned long flags;
@@ -186,7 +185,6 @@ struct qe_pin *qe_pin_request(struct device_node *np, int index)
goto err0;
}
- mm_gc = to_of_mm_gpio_chip(gc);
qe_gc = gpiochip_get_data(gc);
spin_lock_irqsave(&qe_gc->lock, flags);
@@ -255,11 +253,15 @@ void qe_pin_set_dedicated(struct qe_pin *qe_pin)
spin_lock_irqsave(&qe_gc->lock, flags);
if (second_reg) {
- clrsetbits_be32(®s->cpdir2, mask2, sregs->cpdir2 & mask2);
- clrsetbits_be32(®s->cppar2, mask2, sregs->cppar2 & mask2);
+ qe_clrsetbits_be32(®s->cpdir2, mask2,
+ sregs->cpdir2 & mask2);
+ qe_clrsetbits_be32(®s->cppar2, mask2,
+ sregs->cppar2 & mask2);
} else {
- clrsetbits_be32(®s->cpdir1, mask2, sregs->cpdir1 & mask2);
- clrsetbits_be32(®s->cppar1, mask2, sregs->cppar1 & mask2);
+ qe_clrsetbits_be32(®s->cpdir1, mask2,
+ sregs->cpdir1 & mask2);
+ qe_clrsetbits_be32(®s->cppar1, mask2,
+ sregs->cppar1 & mask2);
}
if (sregs->cpdata & mask1)
@@ -267,8 +269,8 @@ void qe_pin_set_dedicated(struct qe_pin *qe_pin)
else
qe_gc->cpdata &= ~mask1;
- out_be32(®s->cpdata, qe_gc->cpdata);
- clrsetbits_be32(®s->cpodr, mask1, sregs->cpodr & mask1);
+ qe_iowrite32be(qe_gc->cpdata, ®s->cpdata);
+ qe_clrsetbits_be32(®s->cpodr, mask1, sregs->cpodr & mask1);
spin_unlock_irqrestore(&qe_gc->lock, flags);
}
diff --git a/drivers/soc/fsl/qe/qe.c b/drivers/soc/fsl/qe/qe.c
index 417df7e..96c2057 100644
--- a/drivers/soc/fsl/qe/qe.c
+++ b/drivers/soc/fsl/qe/qe.c
@@ -22,16 +22,12 @@
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/ioport.h>
+#include <linux/iopoll.h>
#include <linux/crc32.h>
#include <linux/mod_devicetable.h>
#include <linux/of_platform.h>
-#include <asm/irq.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
#include <soc/fsl/qe/immap_qe.h>
#include <soc/fsl/qe/qe.h>
-#include <asm/prom.h>
-#include <asm/rheap.h>
static void qe_snums_init(void);
static int qe_sdma_init(void);
@@ -108,11 +104,12 @@ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
{
unsigned long flags;
u8 mcn_shift = 0, dev_shift = 0;
- u32 ret;
+ u32 val;
+ int ret;
spin_lock_irqsave(&qe_lock, flags);
if (cmd == QE_RESET) {
- out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG));
+ qe_iowrite32be((u32)(cmd | QE_CR_FLG), &qe_immr->cp.cecr);
} else {
if (cmd == QE_ASSIGN_PAGE) {
/* Here device is the SNUM, not sub-block */
@@ -129,20 +126,18 @@ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input)
mcn_shift = QE_CR_MCN_NORMAL_SHIFT;
}
- out_be32(&qe_immr->cp.cecdr, cmd_input);
- out_be32(&qe_immr->cp.cecr,
- (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32)
- mcn_protocol << mcn_shift));
+ qe_iowrite32be(cmd_input, &qe_immr->cp.cecdr);
+ qe_iowrite32be((cmd | QE_CR_FLG | ((u32)device << dev_shift) | (u32)mcn_protocol << mcn_shift),
+ &qe_immr->cp.cecr);
}
/* wait for the QE_CR_FLG to clear */
- ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0,
- 100, 0);
- /* On timeout (e.g. failure), the expression will be false (ret == 0),
- otherwise it will be true (ret == 1). */
+ ret = readx_poll_timeout_atomic(qe_ioread32be, &qe_immr->cp.cecr, val,
+ (val & QE_CR_FLG) == 0, 0, 100);
+ /* On timeout, ret is -ETIMEDOUT, otherwise it will be 0. */
spin_unlock_irqrestore(&qe_lock, flags);
- return ret == 1;
+ return ret == 0;
}
EXPORT_SYMBOL(qe_issue_cmd);
@@ -164,8 +159,7 @@ static unsigned int brg_clk = 0;
unsigned int qe_get_brg_clk(void)
{
struct device_node *qe;
- int size;
- const u32 *prop;
+ u32 brg;
unsigned int mod;
if (brg_clk)
@@ -175,9 +169,8 @@ unsigned int qe_get_brg_clk(void)
if (!qe)
return brg_clk;
- prop = of_get_property(qe, "brg-frequency", &size);
- if (prop && size == sizeof(*prop))
- brg_clk = *prop;
+ if (!of_property_read_u32(qe, "brg-frequency", &brg))
+ brg_clk = brg;
of_node_put(qe);
@@ -197,6 +190,14 @@ EXPORT_SYMBOL(qe_get_brg_clk);
#define PVR_VER_836x 0x8083
#define PVR_VER_832x 0x8084
+static bool qe_general4_errata(void)
+{
+#ifdef CONFIG_PPC32
+ return pvr_version_is(PVR_VER_836x) || pvr_version_is(PVR_VER_832x);
+#endif
+ return false;
+}
+
/* Program the BRG to the given sampling rate and multiplier
*
* @brg: the BRG, QE_BRG1 - QE_BRG16
@@ -223,14 +224,14 @@ int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier)
/* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says
that the BRG divisor must be even if you're not using divide-by-16
mode. */
- if (pvr_version_is(PVR_VER_836x) || pvr_version_is(PVR_VER_832x))
+ if (qe_general4_errata())
if (!div16 && (divisor & 1) && (divisor > 3))
divisor++;
tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) |
QE_BRGC_ENABLE | div16;
- out_be32(&qe_immr->brg.brgc[brg - QE_BRG1], tempval);
+ qe_iowrite32be(tempval, &qe_immr->brg.brgc[brg - QE_BRG1]);
return 0;
}
@@ -364,22 +365,20 @@ EXPORT_SYMBOL(qe_put_snum);
static int qe_sdma_init(void)
{
struct sdma __iomem *sdma = &qe_immr->sdma;
- static unsigned long sdma_buf_offset = (unsigned long)-ENOMEM;
-
- if (!sdma)
- return -ENODEV;
+ static s32 sdma_buf_offset = -ENOMEM;
/* allocate 2 internal temporary buffers (512 bytes size each) for
* the SDMA */
- if (IS_ERR_VALUE(sdma_buf_offset)) {
+ if (sdma_buf_offset < 0) {
sdma_buf_offset = qe_muram_alloc(512 * 2, 4096);
- if (IS_ERR_VALUE(sdma_buf_offset))
+ if (sdma_buf_offset < 0)
return -ENOMEM;
}
- out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK);
- out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK |
- (0x1 << QE_SDMR_CEN_SHIFT)));
+ qe_iowrite32be((u32)sdma_buf_offset & QE_SDEBCR_BA_MASK,
+ &sdma->sdebcr);
+ qe_iowrite32be((QE_SDMR_GLB_1_MSK | (0x1 << QE_SDMR_CEN_SHIFT)),
+ &sdma->sdmr);
return 0;
}
@@ -417,14 +416,14 @@ static void qe_upload_microcode(const void *base,
"uploading microcode '%s'\n", ucode->id);
/* Use auto-increment */
- out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) |
- QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR);
+ qe_iowrite32be(be32_to_cpu(ucode->iram_offset) | QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR,
+ &qe_immr->iram.iadd);
for (i = 0; i < be32_to_cpu(ucode->count); i++)
- out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i]));
+ qe_iowrite32be(be32_to_cpu(code[i]), &qe_immr->iram.idata);
/* Set I-RAM Ready Register */
- out_be32(&qe_immr->iram.iready, be32_to_cpu(QE_IRAM_READY));
+ qe_iowrite32be(be32_to_cpu(QE_IRAM_READY), &qe_immr->iram.iready);
}
/*
@@ -509,7 +508,7 @@ int qe_upload_firmware(const struct qe_firmware *firmware)
* If the microcode calls for it, split the I-RAM.
*/
if (!firmware->split)
- setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR);
+ qe_setbits_be16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR);
if (firmware->soc.model)
printk(KERN_INFO
@@ -543,11 +542,13 @@ int qe_upload_firmware(const struct qe_firmware *firmware)
u32 trap = be32_to_cpu(ucode->traps[j]);
if (trap)
- out_be32(&qe_immr->rsp[i].tibcr[j], trap);
+ qe_iowrite32be(trap,
+ &qe_immr->rsp[i].tibcr[j]);
}
/* Enable traps */
- out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr));
+ qe_iowrite32be(be32_to_cpu(ucode->eccr),
+ &qe_immr->rsp[i].eccr);
}
qe_firmware_uploaded = 1;
@@ -565,11 +566,9 @@ EXPORT_SYMBOL(qe_upload_firmware);
struct qe_firmware_info *qe_get_firmware_info(void)
{
static int initialized;
- struct property *prop;
struct device_node *qe;
struct device_node *fw = NULL;
const char *sprop;
- unsigned int i;
/*
* If we haven't checked yet, and a driver hasn't uploaded a firmware
@@ -603,20 +602,11 @@ struct qe_firmware_info *qe_get_firmware_info(void)
strlcpy(qe_firmware_info.id, sprop,
sizeof(qe_firmware_info.id));
- prop = of_find_property(fw, "extended-modes", NULL);
- if (prop && (prop->length == sizeof(u64))) {
- const u64 *iprop = prop->value;
+ of_property_read_u64(fw, "extended-modes",
+ &qe_firmware_info.extended_modes);
- qe_firmware_info.extended_modes = *iprop;
- }
-
- prop = of_find_property(fw, "virtual-traps", NULL);
- if (prop && (prop->length == 32)) {
- const u32 *iprop = prop->value;
-
- for (i = 0; i < ARRAY_SIZE(qe_firmware_info.vtraps); i++)
- qe_firmware_info.vtraps[i] = iprop[i];
- }
+ of_property_read_u32_array(fw, "virtual-traps", qe_firmware_info.vtraps,
+ ARRAY_SIZE(qe_firmware_info.vtraps));
of_node_put(fw);
@@ -627,17 +617,13 @@ EXPORT_SYMBOL(qe_get_firmware_info);
unsigned int qe_get_num_of_risc(void)
{
struct device_node *qe;
- int size;
unsigned int num_of_risc = 0;
- const u32 *prop;
qe = qe_get_device_node();
if (!qe)
return num_of_risc;
- prop = of_get_property(qe, "fsl,qe-num-riscs", &size);
- if (prop && size == sizeof(*prop))
- num_of_risc = *prop;
+ of_property_read_u32(qe, "fsl,qe-num-riscs", &num_of_risc);
of_node_put(qe);
diff --git a/drivers/soc/fsl/qe/qe_common.c b/drivers/soc/fsl/qe/qe_common.c
index 83e85e6..a81a1a7 100644
--- a/drivers/soc/fsl/qe/qe_common.c
+++ b/drivers/soc/fsl/qe/qe_common.c
@@ -32,7 +32,7 @@ static phys_addr_t muram_pbase;
struct muram_block {
struct list_head head;
- unsigned long start;
+ s32 start;
int size;
};
@@ -110,34 +110,30 @@ int cpm_muram_init(void)
* @algo: algorithm for alloc.
* @data: data for genalloc's algorithm.
*
- * This function returns an offset into the muram area.
+ * This function returns a non-negative offset into the muram area, or
+ * a negative errno on failure.
*/
-static unsigned long cpm_muram_alloc_common(unsigned long size,
- genpool_algo_t algo, void *data)
+static s32 cpm_muram_alloc_common(unsigned long size,
+ genpool_algo_t algo, void *data)
{
struct muram_block *entry;
- unsigned long start;
+ s32 start;
- if (!muram_pool && cpm_muram_init())
- goto out2;
-
- start = gen_pool_alloc_algo(muram_pool, size, algo, data);
- if (!start)
- goto out2;
- start = start - GENPOOL_OFFSET;
- memset_io(cpm_muram_addr(start), 0, size);
entry = kmalloc(sizeof(*entry), GFP_ATOMIC);
if (!entry)
- goto out1;
+ return -ENOMEM;
+ start = gen_pool_alloc_algo(muram_pool, size, algo, data);
+ if (!start) {
+ kfree(entry);
+ return -ENOMEM;
+ }
+ start = start - GENPOOL_OFFSET;
+ memset_io(cpm_muram_addr(start), 0, size);
entry->start = start;
entry->size = size;
list_add(&entry->head, &muram_block_list);
return start;
-out1:
- gen_pool_free(muram_pool, start, size);
-out2:
- return (unsigned long)-ENOMEM;
}
/*
@@ -145,13 +141,14 @@ static unsigned long cpm_muram_alloc_common(unsigned long size,
* @size: number of bytes to allocate
* @align: requested alignment, in bytes
*
- * This function returns an offset into the muram area.
+ * This function returns a non-negative offset into the muram area, or
+ * a negative errno on failure.
* Use cpm_dpram_addr() to get the virtual address of the area.
* Use cpm_muram_free() to free the allocation.
*/
-unsigned long cpm_muram_alloc(unsigned long size, unsigned long align)
+s32 cpm_muram_alloc(unsigned long size, unsigned long align)
{
- unsigned long start;
+ s32 start;
unsigned long flags;
struct genpool_data_align muram_pool_data;
@@ -168,12 +165,15 @@ EXPORT_SYMBOL(cpm_muram_alloc);
* cpm_muram_free - free a chunk of multi-user ram
* @offset: The beginning of the chunk as returned by cpm_muram_alloc().
*/
-int cpm_muram_free(unsigned long offset)
+void cpm_muram_free(s32 offset)
{
unsigned long flags;
int size;
struct muram_block *tmp;
+ if (offset < 0)
+ return;
+
size = 0;
spin_lock_irqsave(&cpm_muram_lock, flags);
list_for_each_entry(tmp, &muram_block_list, head) {
@@ -186,7 +186,6 @@ int cpm_muram_free(unsigned long offset)
}
gen_pool_free(muram_pool, offset + GENPOOL_OFFSET, size);
spin_unlock_irqrestore(&cpm_muram_lock, flags);
- return size;
}
EXPORT_SYMBOL(cpm_muram_free);
@@ -194,13 +193,14 @@ EXPORT_SYMBOL(cpm_muram_free);
* cpm_muram_alloc_fixed - reserve a specific region of multi-user ram
* @offset: offset of allocation start address
* @size: number of bytes to allocate
- * This function returns an offset into the muram area
+ * This function returns @offset if the area was available, a negative
+ * errno otherwise.
* Use cpm_dpram_addr() to get the virtual address of the area.
* Use cpm_muram_free() to free the allocation.
*/
-unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size)
+s32 cpm_muram_alloc_fixed(unsigned long offset, unsigned long size)
{
- unsigned long start;
+ s32 start;
unsigned long flags;
struct genpool_data_fixed muram_pool_data_fixed;
diff --git a/drivers/soc/fsl/qe/qe_ic.c b/drivers/soc/fsl/qe/qe_ic.c
index 9bac546..0dd5bdb 100644
--- a/drivers/soc/fsl/qe/qe_ic.c
+++ b/drivers/soc/fsl/qe/qe_ic.c
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
+#include <linux/irq.h>
#include <linux/reboot.h>
#include <linux/slab.h>
#include <linux/stddef.h>
@@ -24,9 +25,57 @@
#include <linux/spinlock.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <soc/fsl/qe/qe_ic.h>
+#include <soc/fsl/qe/qe.h>
-#include "qe_ic.h"
+#define NR_QE_IC_INTS 64
+
+/* QE IC registers offset */
+#define QEIC_CICR 0x00
+#define QEIC_CIVEC 0x04
+#define QEIC_CIPXCC 0x10
+#define QEIC_CIPYCC 0x14
+#define QEIC_CIPWCC 0x18
+#define QEIC_CIPZCC 0x1c
+#define QEIC_CIMR 0x20
+#define QEIC_CRIMR 0x24
+#define QEIC_CIPRTA 0x30
+#define QEIC_CIPRTB 0x34
+#define QEIC_CHIVEC 0x60
+
+struct qe_ic {
+ /* Control registers offset */
+ u32 __iomem *regs;
+
+ /* The remapper for this QEIC */
+ struct irq_domain *irqhost;
+
+ /* The "linux" controller struct */
+ struct irq_chip hc_irq;
+
+ /* VIRQ numbers of QE high/low irqs */
+ unsigned int virq_high;
+ unsigned int virq_low;
+};
+
+/*
+ * QE interrupt controller internal structure
+ */
+struct qe_ic_info {
+ /* Location of this source at the QIMR register */
+ u32 mask;
+
+ /* Mask register offset */
+ u32 mask_reg;
+
+ /*
+ * For grouped interrupts sources - the interrupt code as
+ * appears at the group priority register
+ */
+ u8 pri_code;
+
+ /* Group priority register offset */
+ u32 pri_reg;
+};
static DEFINE_RAW_SPINLOCK(qe_ic_lock);
@@ -171,15 +220,15 @@ static struct qe_ic_info qe_ic_info[] = {
},
};
-static inline u32 qe_ic_read(volatile __be32 __iomem * base, unsigned int reg)
+static inline u32 qe_ic_read(__be32 __iomem *base, unsigned int reg)
{
- return in_be32(base + (reg >> 2));
+ return qe_ioread32be(base + (reg >> 2));
}
-static inline void qe_ic_write(volatile __be32 __iomem * base, unsigned int reg,
+static inline void qe_ic_write(__be32 __iomem *base, unsigned int reg,
u32 value)
{
- out_be32(base + (reg >> 2), value);
+ qe_iowrite32be(value, base + (reg >> 2));
}
static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
@@ -281,8 +330,8 @@ static const struct irq_domain_ops qe_ic_host_ops = {
.xlate = irq_domain_xlate_onetwocell,
};
-/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
-unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
+/* Return an interrupt vector or 0 if no interrupt is pending. */
+static unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
{
int irq;
@@ -292,13 +341,13 @@ unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26;
if (irq == 0)
- return NO_IRQ;
+ return 0;
return irq_linear_revmap(qe_ic->irqhost, irq);
}
-/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
-unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
+/* Return an interrupt vector or 0 if no interrupt is pending. */
+static unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
{
int irq;
@@ -308,18 +357,60 @@ unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26;
if (irq == 0)
- return NO_IRQ;
+ return 0;
return irq_linear_revmap(qe_ic->irqhost, irq);
}
-void __init qe_ic_init(struct device_node *node, unsigned int flags,
- void (*low_handler)(struct irq_desc *desc),
- void (*high_handler)(struct irq_desc *desc))
+static void qe_ic_cascade_low(struct irq_desc *desc)
{
+ struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
+ unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+
+ if (cascade_irq != 0)
+ generic_handle_irq(cascade_irq);
+
+ if (chip->irq_eoi)
+ chip->irq_eoi(&desc->irq_data);
+}
+
+static void qe_ic_cascade_high(struct irq_desc *desc)
+{
+ struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
+ unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+
+ if (cascade_irq != 0)
+ generic_handle_irq(cascade_irq);
+
+ if (chip->irq_eoi)
+ chip->irq_eoi(&desc->irq_data);
+}
+
+static void qe_ic_cascade_muxed_mpic(struct irq_desc *desc)
+{
+ struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
+ unsigned int cascade_irq;
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+
+ cascade_irq = qe_ic_get_high_irq(qe_ic);
+ if (cascade_irq == 0)
+ cascade_irq = qe_ic_get_low_irq(qe_ic);
+
+ if (cascade_irq != 0)
+ generic_handle_irq(cascade_irq);
+
+ chip->irq_eoi(&desc->irq_data);
+}
+
+static void __init qe_ic_init(struct device_node *node)
+{
+ void (*low_handler)(struct irq_desc *desc);
+ void (*high_handler)(struct irq_desc *desc);
struct qe_ic *qe_ic;
struct resource res;
- u32 temp = 0, ret, high_active = 0;
+ u32 ret;
ret = of_address_to_resource(node, 0, &res);
if (ret)
@@ -343,166 +434,42 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags,
qe_ic->virq_high = irq_of_parse_and_map(node, 0);
qe_ic->virq_low = irq_of_parse_and_map(node, 1);
- if (qe_ic->virq_low == NO_IRQ) {
+ if (!qe_ic->virq_low) {
printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
kfree(qe_ic);
return;
}
-
- /* default priority scheme is grouped. If spread mode is */
- /* required, configure cicr accordingly. */
- if (flags & QE_IC_SPREADMODE_GRP_W)
- temp |= CICR_GWCC;
- if (flags & QE_IC_SPREADMODE_GRP_X)
- temp |= CICR_GXCC;
- if (flags & QE_IC_SPREADMODE_GRP_Y)
- temp |= CICR_GYCC;
- if (flags & QE_IC_SPREADMODE_GRP_Z)
- temp |= CICR_GZCC;
- if (flags & QE_IC_SPREADMODE_GRP_RISCA)
- temp |= CICR_GRTA;
- if (flags & QE_IC_SPREADMODE_GRP_RISCB)
- temp |= CICR_GRTB;
-
- /* choose destination signal for highest priority interrupt */
- if (flags & QE_IC_HIGH_SIGNAL) {
- temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT);
- high_active = 1;
+ if (qe_ic->virq_high != qe_ic->virq_low) {
+ low_handler = qe_ic_cascade_low;
+ high_handler = qe_ic_cascade_high;
+ } else {
+ low_handler = qe_ic_cascade_muxed_mpic;
+ high_handler = NULL;
}
- qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
+ qe_ic_write(qe_ic->regs, QEIC_CICR, 0);
irq_set_handler_data(qe_ic->virq_low, qe_ic);
irq_set_chained_handler(qe_ic->virq_low, low_handler);
- if (qe_ic->virq_high != NO_IRQ &&
- qe_ic->virq_high != qe_ic->virq_low) {
+ if (qe_ic->virq_high && qe_ic->virq_high != qe_ic->virq_low) {
irq_set_handler_data(qe_ic->virq_high, qe_ic);
irq_set_chained_handler(qe_ic->virq_high, high_handler);
}
}
-void qe_ic_set_highest_priority(unsigned int virq, int high)
+static int __init qe_ic_of_init(void)
{
- struct qe_ic *qe_ic = qe_ic_from_irq(virq);
- unsigned int src = virq_to_hw(virq);
- u32 temp = 0;
+ struct device_node *np;
- temp = qe_ic_read(qe_ic->regs, QEIC_CICR);
-
- temp &= ~CICR_HP_MASK;
- temp |= src << CICR_HP_SHIFT;
-
- temp &= ~CICR_HPIT_MASK;
- temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT;
-
- qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
-}
-
-/* Set Priority level within its group, from 1 to 8 */
-int qe_ic_set_priority(unsigned int virq, unsigned int priority)
-{
- struct qe_ic *qe_ic = qe_ic_from_irq(virq);
- unsigned int src = virq_to_hw(virq);
- u32 temp;
-
- if (priority > 8 || priority == 0)
- return -EINVAL;
- if (WARN_ONCE(src >= ARRAY_SIZE(qe_ic_info),
- "%s: Invalid hw irq number for QEIC\n", __func__))
- return -EINVAL;
- if (qe_ic_info[src].pri_reg == 0)
- return -EINVAL;
-
- temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg);
-
- if (priority < 4) {
- temp &= ~(0x7 << (32 - priority * 3));
- temp |= qe_ic_info[src].pri_code << (32 - priority * 3);
- } else {
- temp &= ~(0x7 << (24 - priority * 3));
- temp |= qe_ic_info[src].pri_code << (24 - priority * 3);
+ np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+ if (!np) {
+ np = of_find_node_by_type(NULL, "qeic");
+ if (!np)
+ return -ENODEV;
}
-
- qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp);
-
+ qe_ic_init(np);
+ of_node_put(np);
return 0;
}
-
-/* Set a QE priority to use high irq, only priority 1~2 can use high irq */
-int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high)
-{
- struct qe_ic *qe_ic = qe_ic_from_irq(virq);
- unsigned int src = virq_to_hw(virq);
- u32 temp, control_reg = QEIC_CICNR, shift = 0;
-
- if (priority > 2 || priority == 0)
- return -EINVAL;
- if (WARN_ONCE(src >= ARRAY_SIZE(qe_ic_info),
- "%s: Invalid hw irq number for QEIC\n", __func__))
- return -EINVAL;
-
- switch (qe_ic_info[src].pri_reg) {
- case QEIC_CIPZCC:
- shift = CICNR_ZCC1T_SHIFT;
- break;
- case QEIC_CIPWCC:
- shift = CICNR_WCC1T_SHIFT;
- break;
- case QEIC_CIPYCC:
- shift = CICNR_YCC1T_SHIFT;
- break;
- case QEIC_CIPXCC:
- shift = CICNR_XCC1T_SHIFT;
- break;
- case QEIC_CIPRTA:
- shift = CRICR_RTA1T_SHIFT;
- control_reg = QEIC_CRICR;
- break;
- case QEIC_CIPRTB:
- shift = CRICR_RTB1T_SHIFT;
- control_reg = QEIC_CRICR;
- break;
- default:
- return -EINVAL;
- }
-
- shift += (2 - priority) * 2;
- temp = qe_ic_read(qe_ic->regs, control_reg);
- temp &= ~(SIGNAL_MASK << shift);
- temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift;
- qe_ic_write(qe_ic->regs, control_reg, temp);
-
- return 0;
-}
-
-static struct bus_type qe_ic_subsys = {
- .name = "qe_ic",
- .dev_name = "qe_ic",
-};
-
-static struct device device_qe_ic = {
- .id = 0,
- .bus = &qe_ic_subsys,
-};
-
-static int __init init_qe_ic_sysfs(void)
-{
- int rc;
-
- printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
-
- rc = subsys_system_register(&qe_ic_subsys, NULL);
- if (rc) {
- printk(KERN_ERR "Failed registering qe_ic sys class\n");
- return -ENODEV;
- }
- rc = device_register(&device_qe_ic);
- if (rc) {
- printk(KERN_ERR "Failed registering qe_ic sys device\n");
- return -ENODEV;
- }
- return 0;
-}
-
-subsys_initcall(init_qe_ic_sysfs);
+subsys_initcall(qe_ic_of_init);
diff --git a/drivers/soc/fsl/qe/qe_ic.h b/drivers/soc/fsl/qe/qe_ic.h
deleted file mode 100644
index 08c6956..0000000
--- a/drivers/soc/fsl/qe/qe_ic.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * drivers/soc/fsl/qe/qe_ic.h
- *
- * QUICC ENGINE Interrupt Controller Header
- *
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Author: Li Yang <leoli@freescale.com>
- * Based on code from Shlomi Gridish <gridish@freescale.com>
- */
-#ifndef _POWERPC_SYSDEV_QE_IC_H
-#define _POWERPC_SYSDEV_QE_IC_H
-
-#include <soc/fsl/qe/qe_ic.h>
-
-#define NR_QE_IC_INTS 64
-
-/* QE IC registers offset */
-#define QEIC_CICR 0x00
-#define QEIC_CIVEC 0x04
-#define QEIC_CRIPNR 0x08
-#define QEIC_CIPNR 0x0c
-#define QEIC_CIPXCC 0x10
-#define QEIC_CIPYCC 0x14
-#define QEIC_CIPWCC 0x18
-#define QEIC_CIPZCC 0x1c
-#define QEIC_CIMR 0x20
-#define QEIC_CRIMR 0x24
-#define QEIC_CICNR 0x28
-#define QEIC_CIPRTA 0x30
-#define QEIC_CIPRTB 0x34
-#define QEIC_CRICR 0x3c
-#define QEIC_CHIVEC 0x60
-
-/* Interrupt priority registers */
-#define CIPCC_SHIFT_PRI0 29
-#define CIPCC_SHIFT_PRI1 26
-#define CIPCC_SHIFT_PRI2 23
-#define CIPCC_SHIFT_PRI3 20
-#define CIPCC_SHIFT_PRI4 13
-#define CIPCC_SHIFT_PRI5 10
-#define CIPCC_SHIFT_PRI6 7
-#define CIPCC_SHIFT_PRI7 4
-
-/* CICR priority modes */
-#define CICR_GWCC 0x00040000
-#define CICR_GXCC 0x00020000
-#define CICR_GYCC 0x00010000
-#define CICR_GZCC 0x00080000
-#define CICR_GRTA 0x00200000
-#define CICR_GRTB 0x00400000
-#define CICR_HPIT_SHIFT 8
-#define CICR_HPIT_MASK 0x00000300
-#define CICR_HP_SHIFT 24
-#define CICR_HP_MASK 0x3f000000
-
-/* CICNR */
-#define CICNR_WCC1T_SHIFT 20
-#define CICNR_ZCC1T_SHIFT 28
-#define CICNR_YCC1T_SHIFT 12
-#define CICNR_XCC1T_SHIFT 4
-
-/* CRICR */
-#define CRICR_RTA1T_SHIFT 20
-#define CRICR_RTB1T_SHIFT 28
-
-/* Signal indicator */
-#define SIGNAL_MASK 3
-#define SIGNAL_HIGH 2
-#define SIGNAL_LOW 0
-
-struct qe_ic {
- /* Control registers offset */
- volatile u32 __iomem *regs;
-
- /* The remapper for this QEIC */
- struct irq_domain *irqhost;
-
- /* The "linux" controller struct */
- struct irq_chip hc_irq;
-
- /* VIRQ numbers of QE high/low irqs */
- unsigned int virq_high;
- unsigned int virq_low;
-};
-
-/*
- * QE interrupt controller internal structure
- */
-struct qe_ic_info {
- u32 mask; /* location of this source at the QIMR register. */
- u32 mask_reg; /* Mask register offset */
- u8 pri_code; /* for grouped interrupts sources - the interrupt
- code as appears at the group priority register */
- u32 pri_reg; /* Group priority register offset */
-};
-
-#endif /* _POWERPC_SYSDEV_QE_IC_H */
diff --git a/drivers/soc/fsl/qe/qe_io.c b/drivers/soc/fsl/qe/qe_io.c
index 3657e29..11ea08e 100644
--- a/drivers/soc/fsl/qe/qe_io.c
+++ b/drivers/soc/fsl/qe/qe_io.c
@@ -18,8 +18,6 @@
#include <asm/io.h>
#include <soc/fsl/qe/qe.h>
-#include <asm/prom.h>
-#include <sysdev/fsl_soc.h>
#undef DEBUG
@@ -30,7 +28,7 @@ int par_io_init(struct device_node *np)
{
struct resource res;
int ret;
- const u32 *num_ports;
+ u32 num_ports;
/* Map Parallel I/O ports registers */
ret = of_address_to_resource(np, 0, &res);
@@ -38,9 +36,8 @@ int par_io_init(struct device_node *np)
return ret;
par_io = ioremap(res.start, resource_size(&res));
- num_ports = of_get_property(np, "num-ports", NULL);
- if (num_ports)
- num_par_io_ports = *num_ports;
+ if (!of_property_read_u32(np, "num-ports", &num_ports))
+ num_par_io_ports = num_ports;
return 0;
}
@@ -57,16 +54,16 @@ void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, int dir,
pin_mask1bit = (u32) (1 << (QE_PIO_PINS - (pin + 1)));
/* Set open drain, if required */
- tmp_val = in_be32(&par_io->cpodr);
+ tmp_val = qe_ioread32be(&par_io->cpodr);
if (open_drain)
- out_be32(&par_io->cpodr, pin_mask1bit | tmp_val);
+ qe_iowrite32be(pin_mask1bit | tmp_val, &par_io->cpodr);
else
- out_be32(&par_io->cpodr, ~pin_mask1bit & tmp_val);
+ qe_iowrite32be(~pin_mask1bit & tmp_val, &par_io->cpodr);
/* define direction */
tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
- in_be32(&par_io->cpdir2) :
- in_be32(&par_io->cpdir1);
+ qe_ioread32be(&par_io->cpdir2) :
+ qe_ioread32be(&par_io->cpdir1);
/* get all bits mask for 2 bit per port */
pin_mask2bits = (u32) (0x3 << (QE_PIO_PINS -
@@ -78,34 +75,30 @@ void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, int dir,
/* clear and set 2 bits mask */
if (pin > (QE_PIO_PINS / 2) - 1) {
- out_be32(&par_io->cpdir2,
- ~pin_mask2bits & tmp_val);
+ qe_iowrite32be(~pin_mask2bits & tmp_val, &par_io->cpdir2);
tmp_val &= ~pin_mask2bits;
- out_be32(&par_io->cpdir2, new_mask2bits | tmp_val);
+ qe_iowrite32be(new_mask2bits | tmp_val, &par_io->cpdir2);
} else {
- out_be32(&par_io->cpdir1,
- ~pin_mask2bits & tmp_val);
+ qe_iowrite32be(~pin_mask2bits & tmp_val, &par_io->cpdir1);
tmp_val &= ~pin_mask2bits;
- out_be32(&par_io->cpdir1, new_mask2bits | tmp_val);
+ qe_iowrite32be(new_mask2bits | tmp_val, &par_io->cpdir1);
}
/* define pin assignment */
tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
- in_be32(&par_io->cppar2) :
- in_be32(&par_io->cppar1);
+ qe_ioread32be(&par_io->cppar2) :
+ qe_ioread32be(&par_io->cppar1);
new_mask2bits = (u32) (assignment << (QE_PIO_PINS -
(pin % (QE_PIO_PINS / 2) + 1) * 2));
/* clear and set 2 bits mask */
if (pin > (QE_PIO_PINS / 2) - 1) {
- out_be32(&par_io->cppar2,
- ~pin_mask2bits & tmp_val);
+ qe_iowrite32be(~pin_mask2bits & tmp_val, &par_io->cppar2);
tmp_val &= ~pin_mask2bits;
- out_be32(&par_io->cppar2, new_mask2bits | tmp_val);
+ qe_iowrite32be(new_mask2bits | tmp_val, &par_io->cppar2);
} else {
- out_be32(&par_io->cppar1,
- ~pin_mask2bits & tmp_val);
+ qe_iowrite32be(~pin_mask2bits & tmp_val, &par_io->cppar1);
tmp_val &= ~pin_mask2bits;
- out_be32(&par_io->cppar1, new_mask2bits | tmp_val);
+ qe_iowrite32be(new_mask2bits | tmp_val, &par_io->cppar1);
}
}
EXPORT_SYMBOL(__par_io_config_pin);
@@ -133,12 +126,12 @@ int par_io_data_set(u8 port, u8 pin, u8 val)
/* calculate pin location */
pin_mask = (u32) (1 << (QE_PIO_PINS - 1 - pin));
- tmp_val = in_be32(&par_io[port].cpdata);
+ tmp_val = qe_ioread32be(&par_io[port].cpdata);
if (val == 0) /* clear */
- out_be32(&par_io[port].cpdata, ~pin_mask & tmp_val);
+ qe_iowrite32be(~pin_mask & tmp_val, &par_io[port].cpdata);
else /* set */
- out_be32(&par_io[port].cpdata, pin_mask | tmp_val);
+ qe_iowrite32be(pin_mask | tmp_val, &par_io[port].cpdata);
return 0;
}
@@ -147,23 +140,20 @@ EXPORT_SYMBOL(par_io_data_set);
int par_io_of_config(struct device_node *np)
{
struct device_node *pio;
- const phandle *ph;
int pio_map_len;
- const unsigned int *pio_map;
+ const __be32 *pio_map;
if (par_io == NULL) {
printk(KERN_ERR "par_io not initialized\n");
return -1;
}
- ph = of_get_property(np, "pio-handle", NULL);
- if (ph == NULL) {
+ pio = of_parse_phandle(np, "pio-handle", 0);
+ if (pio == NULL) {
printk(KERN_ERR "pio-handle not available\n");
return -1;
}
- pio = of_find_node_by_phandle(*ph);
-
pio_map = of_get_property(pio, "pio-map", &pio_map_len);
if (pio_map == NULL) {
printk(KERN_ERR "pio-map is not set!\n");
@@ -176,9 +166,15 @@ int par_io_of_config(struct device_node *np)
}
while (pio_map_len > 0) {
- par_io_config_pin((u8) pio_map[0], (u8) pio_map[1],
- (int) pio_map[2], (int) pio_map[3],
- (int) pio_map[4], (int) pio_map[5]);
+ u8 port = be32_to_cpu(pio_map[0]);
+ u8 pin = be32_to_cpu(pio_map[1]);
+ int dir = be32_to_cpu(pio_map[2]);
+ int open_drain = be32_to_cpu(pio_map[3]);
+ int assignment = be32_to_cpu(pio_map[4]);
+ int has_irq = be32_to_cpu(pio_map[5]);
+
+ par_io_config_pin(port, pin, dir, open_drain,
+ assignment, has_irq);
pio_map += 6;
pio_map_len -= 6;
}
diff --git a/drivers/soc/fsl/qe/qe_tdm.c b/drivers/soc/fsl/qe/qe_tdm.c
index e37ebc3..7d7d78d 100644
--- a/drivers/soc/fsl/qe/qe_tdm.c
+++ b/drivers/soc/fsl/qe/qe_tdm.c
@@ -169,10 +169,10 @@ void ucc_tdm_init(struct ucc_tdm *utdm, struct ucc_tdm_info *ut_info)
&siram[siram_entry_id * 32 + 0x200 + i]);
}
- setbits16(&siram[(siram_entry_id * 32) + (utdm->num_of_ts - 1)],
- SIR_LAST);
- setbits16(&siram[(siram_entry_id * 32) + 0x200 + (utdm->num_of_ts - 1)],
- SIR_LAST);
+ qe_setbits_be16(&siram[(siram_entry_id * 32) + (utdm->num_of_ts - 1)],
+ SIR_LAST);
+ qe_setbits_be16(&siram[(siram_entry_id * 32) + 0x200 + (utdm->num_of_ts - 1)],
+ SIR_LAST);
/* Set SIxMR register */
sixmr = SIMR_SAD(siram_entry_id);
diff --git a/drivers/soc/fsl/qe/ucc.c b/drivers/soc/fsl/qe/ucc.c
index 024d239..90157ac 100644
--- a/drivers/soc/fsl/qe/ucc.c
+++ b/drivers/soc/fsl/qe/ucc.c
@@ -15,7 +15,6 @@
#include <linux/spinlock.h>
#include <linux/export.h>
-#include <asm/irq.h>
#include <asm/io.h>
#include <soc/fsl/qe/immap_qe.h>
#include <soc/fsl/qe/qe.h>
@@ -35,8 +34,8 @@ int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
return -EINVAL;
spin_lock_irqsave(&cmxgcr_lock, flags);
- clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
- ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT);
+ qe_clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
+ ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT);
spin_unlock_irqrestore(&cmxgcr_lock, flags);
return 0;
@@ -80,8 +79,8 @@ int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed)
return -EINVAL;
}
- clrsetbits_8(guemr, UCC_GUEMR_MODE_MASK,
- UCC_GUEMR_SET_RESERVED3 | speed);
+ qe_clrsetbits_8(guemr, UCC_GUEMR_MODE_MASK,
+ UCC_GUEMR_SET_RESERVED3 | speed);
return 0;
}
@@ -109,9 +108,9 @@ int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
get_cmxucr_reg(ucc_num, &cmxucr, ®_num, &shift);
if (set)
- setbits32(cmxucr, mask << shift);
+ qe_setbits_be32(cmxucr, mask << shift);
else
- clrbits32(cmxucr, mask << shift);
+ qe_clrbits_be32(cmxucr, mask << shift);
return 0;
}
@@ -207,8 +206,8 @@ int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
if (mode == COMM_DIR_RX)
shift += 4;
- clrsetbits_be32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
- clock_bits << shift);
+ qe_clrsetbits_be32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
+ clock_bits << shift);
return 0;
}
@@ -540,8 +539,8 @@ int ucc_set_tdm_rxtx_clk(u32 tdm_num, enum qe_clock clock,
cmxs1cr = (tdm_num < 4) ? &qe_mux_reg->cmxsi1cr_l :
&qe_mux_reg->cmxsi1cr_h;
- qe_clrsetbits32(cmxs1cr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
- clock_bits << shift);
+ qe_clrsetbits_be32(cmxs1cr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
+ clock_bits << shift);
return 0;
}
@@ -650,9 +649,9 @@ int ucc_set_tdm_rxtx_sync(u32 tdm_num, enum qe_clock clock,
shift = ucc_get_tdm_sync_shift(mode, tdm_num);
- qe_clrsetbits32(&qe_mux_reg->cmxsi1syr,
- QE_CMXUCR_TX_CLK_SRC_MASK << shift,
- source << shift);
+ qe_clrsetbits_be32(&qe_mux_reg->cmxsi1syr,
+ QE_CMXUCR_TX_CLK_SRC_MASK << shift,
+ source << shift);
return 0;
}
diff --git a/drivers/soc/fsl/qe/ucc_fast.c b/drivers/soc/fsl/qe/ucc_fast.c
index af4d80e..ad6193e 100644
--- a/drivers/soc/fsl/qe/ucc_fast.c
+++ b/drivers/soc/fsl/qe/ucc_fast.c
@@ -29,41 +29,42 @@ void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs);
printk(KERN_INFO "gumr : addr=0x%p, val=0x%08x\n",
- &uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
+ &uccf->uf_regs->gumr, qe_ioread32be(&uccf->uf_regs->gumr));
printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n",
- &uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
+ &uccf->uf_regs->upsmr, qe_ioread32be(&uccf->uf_regs->upsmr));
printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
+ &uccf->uf_regs->utodr, qe_ioread16be(&uccf->uf_regs->utodr));
printk(KERN_INFO "udsr : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
+ &uccf->uf_regs->udsr, qe_ioread16be(&uccf->uf_regs->udsr));
printk(KERN_INFO "ucce : addr=0x%p, val=0x%08x\n",
- &uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
+ &uccf->uf_regs->ucce, qe_ioread32be(&uccf->uf_regs->ucce));
printk(KERN_INFO "uccm : addr=0x%p, val=0x%08x\n",
- &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
+ &uccf->uf_regs->uccm, qe_ioread32be(&uccf->uf_regs->uccm));
printk(KERN_INFO "uccs : addr=0x%p, val=0x%02x\n",
- &uccf->uf_regs->uccs, in_8(&uccf->uf_regs->uccs));
+ &uccf->uf_regs->uccs, qe_ioread8(&uccf->uf_regs->uccs));
printk(KERN_INFO "urfb : addr=0x%p, val=0x%08x\n",
- &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
+ &uccf->uf_regs->urfb, qe_ioread32be(&uccf->uf_regs->urfb));
printk(KERN_INFO "urfs : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
+ &uccf->uf_regs->urfs, qe_ioread16be(&uccf->uf_regs->urfs));
printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
+ &uccf->uf_regs->urfet, qe_ioread16be(&uccf->uf_regs->urfet));
printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset));
+ &uccf->uf_regs->urfset,
+ qe_ioread16be(&uccf->uf_regs->urfset));
printk(KERN_INFO "utfb : addr=0x%p, val=0x%08x\n",
- &uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
+ &uccf->uf_regs->utfb, qe_ioread32be(&uccf->uf_regs->utfb));
printk(KERN_INFO "utfs : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
+ &uccf->uf_regs->utfs, qe_ioread16be(&uccf->uf_regs->utfs));
printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
+ &uccf->uf_regs->utfet, qe_ioread16be(&uccf->uf_regs->utfet));
printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
+ &uccf->uf_regs->utftt, qe_ioread16be(&uccf->uf_regs->utftt));
printk(KERN_INFO "utpt : addr=0x%p, val=0x%04x\n",
- &uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
+ &uccf->uf_regs->utpt, qe_ioread16be(&uccf->uf_regs->utpt));
printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
- &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
+ &uccf->uf_regs->urtry, qe_ioread32be(&uccf->uf_regs->urtry));
printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
- &uccf->uf_regs->guemr, in_8(&uccf->uf_regs->guemr));
+ &uccf->uf_regs->guemr, qe_ioread8(&uccf->uf_regs->guemr));
}
EXPORT_SYMBOL(ucc_fast_dump_regs);
@@ -85,7 +86,7 @@ EXPORT_SYMBOL(ucc_fast_get_qe_cr_subblock);
void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf)
{
- out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
+ qe_iowrite16be(UCC_FAST_TOD, &uccf->uf_regs->utodr);
}
EXPORT_SYMBOL(ucc_fast_transmit_on_demand);
@@ -97,7 +98,7 @@ void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
uf_regs = uccf->uf_regs;
/* Enable reception and/or transmission on this UCC. */
- gumr = in_be32(&uf_regs->gumr);
+ gumr = qe_ioread32be(&uf_regs->gumr);
if (mode & COMM_DIR_TX) {
gumr |= UCC_FAST_GUMR_ENT;
uccf->enabled_tx = 1;
@@ -106,7 +107,7 @@ void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
gumr |= UCC_FAST_GUMR_ENR;
uccf->enabled_rx = 1;
}
- out_be32(&uf_regs->gumr, gumr);
+ qe_iowrite32be(gumr, &uf_regs->gumr);
}
EXPORT_SYMBOL(ucc_fast_enable);
@@ -118,7 +119,7 @@ void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
uf_regs = uccf->uf_regs;
/* Disable reception and/or transmission on this UCC. */
- gumr = in_be32(&uf_regs->gumr);
+ gumr = qe_ioread32be(&uf_regs->gumr);
if (mode & COMM_DIR_TX) {
gumr &= ~UCC_FAST_GUMR_ENT;
uccf->enabled_tx = 0;
@@ -127,7 +128,7 @@ void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
gumr &= ~UCC_FAST_GUMR_ENR;
uccf->enabled_rx = 0;
}
- out_be32(&uf_regs->gumr, gumr);
+ qe_iowrite32be(gumr, &uf_regs->gumr);
}
EXPORT_SYMBOL(ucc_fast_disable);
@@ -196,6 +197,8 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
__func__);
return -ENOMEM;
}
+ uccf->ucc_fast_tx_virtual_fifo_base_offset = -1;
+ uccf->ucc_fast_rx_virtual_fifo_base_offset = -1;
/* Fill fast UCC structure */
uccf->uf_info = uf_info;
@@ -259,15 +262,14 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
gumr |= uf_info->tenc;
gumr |= uf_info->tcrc;
gumr |= uf_info->mode;
- out_be32(&uf_regs->gumr, gumr);
+ qe_iowrite32be(gumr, &uf_regs->gumr);
/* Allocate memory for Tx Virtual Fifo */
uccf->ucc_fast_tx_virtual_fifo_base_offset =
qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
- if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
+ if (uccf->ucc_fast_tx_virtual_fifo_base_offset < 0) {
printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
__func__);
- uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
ucc_fast_free(uccf);
return -ENOMEM;
}
@@ -277,24 +279,25 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
qe_muram_alloc(uf_info->urfs +
UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
- if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
+ if (uccf->ucc_fast_rx_virtual_fifo_base_offset < 0) {
printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
__func__);
- uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
ucc_fast_free(uccf);
return -ENOMEM;
}
/* Set Virtual Fifo registers */
- out_be16(&uf_regs->urfs, uf_info->urfs);
- out_be16(&uf_regs->urfet, uf_info->urfet);
- out_be16(&uf_regs->urfset, uf_info->urfset);
- out_be16(&uf_regs->utfs, uf_info->utfs);
- out_be16(&uf_regs->utfet, uf_info->utfet);
- out_be16(&uf_regs->utftt, uf_info->utftt);
+ qe_iowrite16be(uf_info->urfs, &uf_regs->urfs);
+ qe_iowrite16be(uf_info->urfet, &uf_regs->urfet);
+ qe_iowrite16be(uf_info->urfset, &uf_regs->urfset);
+ qe_iowrite16be(uf_info->utfs, &uf_regs->utfs);
+ qe_iowrite16be(uf_info->utfet, &uf_regs->utfet);
+ qe_iowrite16be(uf_info->utftt, &uf_regs->utftt);
/* utfb, urfb are offsets from MURAM base */
- out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset);
- out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset);
+ qe_iowrite32be(uccf->ucc_fast_tx_virtual_fifo_base_offset,
+ &uf_regs->utfb);
+ qe_iowrite32be(uccf->ucc_fast_rx_virtual_fifo_base_offset,
+ &uf_regs->urfb);
/* Mux clocking */
/* Grant Support */
@@ -362,14 +365,14 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
}
/* Set interrupt mask register at UCC level. */
- out_be32(&uf_regs->uccm, uf_info->uccm_mask);
+ qe_iowrite32be(uf_info->uccm_mask, &uf_regs->uccm);
/* First, clear anything pending at UCC level,
* otherwise, old garbage may come through
* as soon as the dam is opened. */
/* Writing '1' clears */
- out_be32(&uf_regs->ucce, 0xffffffff);
+ qe_iowrite32be(0xffffffff, &uf_regs->ucce);
*uccf_ret = uccf;
return 0;
@@ -381,11 +384,8 @@ void ucc_fast_free(struct ucc_fast_private * uccf)
if (!uccf)
return;
- if (uccf->ucc_fast_tx_virtual_fifo_base_offset)
- qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset);
-
- if (uccf->ucc_fast_rx_virtual_fifo_base_offset)
- qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset);
+ qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset);
+ qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset);
if (uccf->uf_regs)
iounmap(uccf->uf_regs);
diff --git a/drivers/soc/fsl/qe/ucc_slow.c b/drivers/soc/fsl/qe/ucc_slow.c
index 34f0ec3..274d344 100644
--- a/drivers/soc/fsl/qe/ucc_slow.c
+++ b/drivers/soc/fsl/qe/ucc_slow.c
@@ -78,7 +78,7 @@ void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
us_regs = uccs->us_regs;
/* Enable reception and/or transmission on this UCC. */
- gumr_l = in_be32(&us_regs->gumr_l);
+ gumr_l = qe_ioread32be(&us_regs->gumr_l);
if (mode & COMM_DIR_TX) {
gumr_l |= UCC_SLOW_GUMR_L_ENT;
uccs->enabled_tx = 1;
@@ -87,7 +87,7 @@ void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
gumr_l |= UCC_SLOW_GUMR_L_ENR;
uccs->enabled_rx = 1;
}
- out_be32(&us_regs->gumr_l, gumr_l);
+ qe_iowrite32be(gumr_l, &us_regs->gumr_l);
}
EXPORT_SYMBOL(ucc_slow_enable);
@@ -99,7 +99,7 @@ void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
us_regs = uccs->us_regs;
/* Disable reception and/or transmission on this UCC. */
- gumr_l = in_be32(&us_regs->gumr_l);
+ gumr_l = qe_ioread32be(&us_regs->gumr_l);
if (mode & COMM_DIR_TX) {
gumr_l &= ~UCC_SLOW_GUMR_L_ENT;
uccs->enabled_tx = 0;
@@ -108,7 +108,7 @@ void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
gumr_l &= ~UCC_SLOW_GUMR_L_ENR;
uccs->enabled_rx = 0;
}
- out_be32(&us_regs->gumr_l, gumr_l);
+ qe_iowrite32be(gumr_l, &us_regs->gumr_l);
}
EXPORT_SYMBOL(ucc_slow_disable);
@@ -154,6 +154,9 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
__func__);
return -ENOMEM;
}
+ uccs->rx_base_offset = -1;
+ uccs->tx_base_offset = -1;
+ uccs->us_pram_offset = -1;
/* Fill slow UCC structure */
uccs->us_info = us_info;
@@ -179,7 +182,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
/* Get PRAM base */
uccs->us_pram_offset =
qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
- if (IS_ERR_VALUE(uccs->us_pram_offset)) {
+ if (uccs->us_pram_offset < 0) {
printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __func__);
ucc_slow_free(uccs);
return -ENOMEM;
@@ -198,7 +201,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
return ret;
}
- out_be16(&uccs->us_pram->mrblr, us_info->max_rx_buf_length);
+ qe_iowrite16be(us_info->max_rx_buf_length, &uccs->us_pram->mrblr);
INIT_LIST_HEAD(&uccs->confQ);
@@ -206,10 +209,9 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
uccs->rx_base_offset =
qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
QE_ALIGNMENT_OF_BD);
- if (IS_ERR_VALUE(uccs->rx_base_offset)) {
+ if (uccs->rx_base_offset < 0) {
printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __func__,
us_info->rx_bd_ring_len);
- uccs->rx_base_offset = 0;
ucc_slow_free(uccs);
return -ENOMEM;
}
@@ -217,9 +219,8 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
uccs->tx_base_offset =
qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
QE_ALIGNMENT_OF_BD);
- if (IS_ERR_VALUE(uccs->tx_base_offset)) {
+ if (uccs->tx_base_offset < 0) {
printk(KERN_ERR "%s: cannot allocate TX BDs", __func__);
- uccs->tx_base_offset = 0;
ucc_slow_free(uccs);
return -ENOMEM;
}
@@ -228,27 +229,27 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset);
for (i = 0; i < us_info->tx_bd_ring_len - 1; i++) {
/* clear bd buffer */
- out_be32(&bd->buf, 0);
+ qe_iowrite32be(0, &bd->buf);
/* set bd status and length */
- out_be32((u32 *) bd, 0);
+ qe_iowrite32be(0, (u32 *)bd);
bd++;
}
/* for last BD set Wrap bit */
- out_be32(&bd->buf, 0);
- out_be32((u32 *) bd, cpu_to_be32(T_W));
+ qe_iowrite32be(0, &bd->buf);
+ qe_iowrite32be(cpu_to_be32(T_W), (u32 *)bd);
/* Init Rx bds */
bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset);
for (i = 0; i < us_info->rx_bd_ring_len - 1; i++) {
/* set bd status and length */
- out_be32((u32*)bd, 0);
+ qe_iowrite32be(0, (u32 *)bd);
/* clear bd buffer */
- out_be32(&bd->buf, 0);
+ qe_iowrite32be(0, &bd->buf);
bd++;
}
/* for last BD set Wrap bit */
- out_be32((u32*)bd, cpu_to_be32(R_W));
- out_be32(&bd->buf, 0);
+ qe_iowrite32be(cpu_to_be32(R_W), (u32 *)bd);
+ qe_iowrite32be(0, &bd->buf);
/* Set GUMR (For more details see the hardware spec.). */
/* gumr_h */
@@ -269,7 +270,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
gumr |= UCC_SLOW_GUMR_H_TXSY;
if (us_info->rtsm)
gumr |= UCC_SLOW_GUMR_H_RTSM;
- out_be32(&us_regs->gumr_h, gumr);
+ qe_iowrite32be(gumr, &us_regs->gumr_h);
/* gumr_l */
gumr = us_info->tdcr | us_info->rdcr | us_info->tenc | us_info->renc |
@@ -282,7 +283,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
gumr |= UCC_SLOW_GUMR_L_TINV;
if (us_info->tend)
gumr |= UCC_SLOW_GUMR_L_TEND;
- out_be32(&us_regs->gumr_l, gumr);
+ qe_iowrite32be(gumr, &us_regs->gumr_l);
/* Function code registers */
@@ -292,8 +293,8 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
uccs->us_pram->rbmr = UCC_BMR_BO_BE;
/* rbase, tbase are offsets from MURAM base */
- out_be16(&uccs->us_pram->rbase, uccs->rx_base_offset);
- out_be16(&uccs->us_pram->tbase, uccs->tx_base_offset);
+ qe_iowrite16be(uccs->rx_base_offset, &uccs->us_pram->rbase);
+ qe_iowrite16be(uccs->tx_base_offset, &uccs->us_pram->tbase);
/* Mux clocking */
/* Grant Support */
@@ -323,14 +324,14 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
}
/* Set interrupt mask register at UCC level. */
- out_be16(&us_regs->uccm, us_info->uccm_mask);
+ qe_iowrite16be(us_info->uccm_mask, &us_regs->uccm);
/* First, clear anything pending at UCC level,
* otherwise, old garbage may come through
* as soon as the dam is opened. */
/* Writing '1' clears */
- out_be16(&us_regs->ucce, 0xffff);
+ qe_iowrite16be(0xffff, &us_regs->ucce);
/* Issue QE Init command */
if (us_info->init_tx && us_info->init_rx)
@@ -352,14 +353,9 @@ void ucc_slow_free(struct ucc_slow_private * uccs)
if (!uccs)
return;
- if (uccs->rx_base_offset)
- qe_muram_free(uccs->rx_base_offset);
-
- if (uccs->tx_base_offset)
- qe_muram_free(uccs->tx_base_offset);
-
- if (uccs->us_pram)
- qe_muram_free(uccs->us_pram_offset);
+ qe_muram_free(uccs->rx_base_offset);
+ qe_muram_free(uccs->tx_base_offset);
+ qe_muram_free(uccs->us_pram_offset);
if (uccs->us_regs)
iounmap(uccs->us_regs);
diff --git a/drivers/soc/fsl/qe/usb.c b/drivers/soc/fsl/qe/usb.c
index 32d8269..890f236 100644
--- a/drivers/soc/fsl/qe/usb.c
+++ b/drivers/soc/fsl/qe/usb.c
@@ -43,7 +43,7 @@ int qe_usb_clock_set(enum qe_clock clk, int rate)
spin_lock_irqsave(&cmxgcr_lock, flags);
- clrsetbits_be32(&mux->cmxgcr, QE_CMXGCR_USBCS, val);
+ qe_clrsetbits_be32(&mux->cmxgcr, QE_CMXGCR_USBCS, val);
spin_unlock_irqrestore(&cmxgcr_lock, flags);
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index a0555ae..afc2a5d 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -32,7 +32,11 @@
#include <soc/fsl/qe/ucc_slow.h>
#include <linux/firmware.h>
-#include <asm/reg.h>
+#include <soc/fsl/cpm.h>
+
+#ifdef CONFIG_PPC32
+#include <asm/reg.h> /* mfspr, SPRN_SVR */
+#endif
/*
* The GUMR flag for Soft UART. This would normally be defined in qe.h,
@@ -257,11 +261,11 @@ static unsigned int qe_uart_tx_empty(struct uart_port *port)
struct qe_bd *bdp = qe_port->tx_bd_base;
while (1) {
- if (in_be16(&bdp->status) & BD_SC_READY)
+ if (qe_ioread16be(&bdp->status) & BD_SC_READY)
/* This BD is not done, so return "not done" */
return 0;
- if (in_be16(&bdp->status) & BD_SC_WRAP)
+ if (qe_ioread16be(&bdp->status) & BD_SC_WRAP)
/*
* This BD is done and it's the last one, so return
* "done"
@@ -307,7 +311,7 @@ static void qe_uart_stop_tx(struct uart_port *port)
struct uart_qe_port *qe_port =
container_of(port, struct uart_qe_port, port);
- clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX);
+ qe_clrbits_be16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX);
}
/*
@@ -339,13 +343,13 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
/* Pick next descriptor and fill from buffer */
bdp = qe_port->tx_cur;
- p = qe2cpu_addr(bdp->buf, qe_port);
+ p = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port);
*p++ = port->x_char;
- out_be16(&bdp->length, 1);
- setbits16(&bdp->status, BD_SC_READY);
+ qe_iowrite16be(1, &bdp->length);
+ qe_setbits_be16(&bdp->status, BD_SC_READY);
/* Get next BD. */
- if (in_be16(&bdp->status) & BD_SC_WRAP)
+ if (qe_ioread16be(&bdp->status) & BD_SC_WRAP)
bdp = qe_port->tx_bd_base;
else
bdp++;
@@ -364,10 +368,10 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
/* Pick next descriptor and fill from buffer */
bdp = qe_port->tx_cur;
- while (!(in_be16(&bdp->status) & BD_SC_READY) &&
+ while (!(qe_ioread16be(&bdp->status) & BD_SC_READY) &&
(xmit->tail != xmit->head)) {
count = 0;
- p = qe2cpu_addr(bdp->buf, qe_port);
+ p = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port);
while (count < qe_port->tx_fifosize) {
*p++ = xmit->buf[xmit->tail];
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@@ -377,11 +381,11 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
break;
}
- out_be16(&bdp->length, count);
- setbits16(&bdp->status, BD_SC_READY);
+ qe_iowrite16be(count, &bdp->length);
+ qe_setbits_be16(&bdp->status, BD_SC_READY);
/* Get next BD. */
- if (in_be16(&bdp->status) & BD_SC_WRAP)
+ if (qe_ioread16be(&bdp->status) & BD_SC_WRAP)
bdp = qe_port->tx_bd_base;
else
bdp++;
@@ -414,12 +418,12 @@ static void qe_uart_start_tx(struct uart_port *port)
container_of(port, struct uart_qe_port, port);
/* If we currently are transmitting, then just return */
- if (in_be16(&qe_port->uccp->uccm) & UCC_UART_UCCE_TX)
+ if (qe_ioread16be(&qe_port->uccp->uccm) & UCC_UART_UCCE_TX)
return;
/* Otherwise, pump the port and start transmission */
if (qe_uart_tx_pump(qe_port))
- setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX);
+ qe_setbits_be16(&qe_port->uccp->uccm, UCC_UART_UCCE_TX);
}
/*
@@ -430,7 +434,7 @@ static void qe_uart_stop_rx(struct uart_port *port)
struct uart_qe_port *qe_port =
container_of(port, struct uart_qe_port, port);
- clrbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX);
+ qe_clrbits_be16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX);
}
/* Start or stop sending break signal
@@ -469,14 +473,14 @@ static void qe_uart_int_rx(struct uart_qe_port *qe_port)
*/
bdp = qe_port->rx_cur;
while (1) {
- status = in_be16(&bdp->status);
+ status = qe_ioread16be(&bdp->status);
/* If this one is empty, then we assume we've read them all */
if (status & BD_SC_EMPTY)
break;
/* get number of characters, and check space in RX buffer */
- i = in_be16(&bdp->length);
+ i = qe_ioread16be(&bdp->length);
/* If we don't have enough room in RX buffer for the entire BD,
* then we try later, which will be the next RX interrupt.
@@ -487,7 +491,7 @@ static void qe_uart_int_rx(struct uart_qe_port *qe_port)
}
/* get pointer */
- cp = qe2cpu_addr(bdp->buf, qe_port);
+ cp = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port);
/* loop through the buffer */
while (i-- > 0) {
@@ -507,9 +511,10 @@ static void qe_uart_int_rx(struct uart_qe_port *qe_port)
}
/* This BD is ready to be used again. Clear status. get next */
- clrsetbits_be16(&bdp->status, BD_SC_BR | BD_SC_FR | BD_SC_PR |
- BD_SC_OV | BD_SC_ID, BD_SC_EMPTY);
- if (in_be16(&bdp->status) & BD_SC_WRAP)
+ qe_clrsetbits_be16(&bdp->status,
+ BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID,
+ BD_SC_EMPTY);
+ if (qe_ioread16be(&bdp->status) & BD_SC_WRAP)
bdp = qe_port->rx_bd_base;
else
bdp++;
@@ -568,8 +573,8 @@ static irqreturn_t qe_uart_int(int irq, void *data)
u16 events;
/* Clear the interrupts */
- events = in_be16(&uccp->ucce);
- out_be16(&uccp->ucce, events);
+ events = qe_ioread16be(&uccp->ucce);
+ qe_iowrite16be(events, &uccp->ucce);
if (events & UCC_UART_UCCE_BRKE)
uart_handle_break(&qe_port->port);
@@ -600,17 +605,17 @@ static void qe_uart_initbd(struct uart_qe_port *qe_port)
bdp = qe_port->rx_bd_base;
qe_port->rx_cur = qe_port->rx_bd_base;
for (i = 0; i < (qe_port->rx_nrfifos - 1); i++) {
- out_be16(&bdp->status, BD_SC_EMPTY | BD_SC_INTRPT);
- out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
- out_be16(&bdp->length, 0);
+ qe_iowrite16be(BD_SC_EMPTY | BD_SC_INTRPT, &bdp->status);
+ qe_iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf);
+ qe_iowrite16be(0, &bdp->length);
bd_virt += qe_port->rx_fifosize;
bdp++;
}
/* */
- out_be16(&bdp->status, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT);
- out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
- out_be16(&bdp->length, 0);
+ qe_iowrite16be(BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT, &bdp->status);
+ qe_iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf);
+ qe_iowrite16be(0, &bdp->length);
/* Set the physical address of the host memory
* buffers in the buffer descriptors, and the
@@ -621,21 +626,21 @@ static void qe_uart_initbd(struct uart_qe_port *qe_port)
qe_port->tx_cur = qe_port->tx_bd_base;
bdp = qe_port->tx_bd_base;
for (i = 0; i < (qe_port->tx_nrfifos - 1); i++) {
- out_be16(&bdp->status, BD_SC_INTRPT);
- out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
- out_be16(&bdp->length, 0);
+ qe_iowrite16be(BD_SC_INTRPT, &bdp->status);
+ qe_iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf);
+ qe_iowrite16be(0, &bdp->length);
bd_virt += qe_port->tx_fifosize;
bdp++;
}
/* Loopback requires the preamble bit to be set on the first TX BD */
#ifdef LOOPBACK
- setbits16(&qe_port->tx_cur->status, BD_SC_P);
+ qe_setbits_be16(&qe_port->tx_cur->status, BD_SC_P);
#endif
- out_be16(&bdp->status, BD_SC_WRAP | BD_SC_INTRPT);
- out_be32(&bdp->buf, cpu2qe_addr(bd_virt, qe_port));
- out_be16(&bdp->length, 0);
+ qe_iowrite16be(BD_SC_WRAP | BD_SC_INTRPT, &bdp->status);
+ qe_iowrite32be(cpu2qe_addr(bd_virt, qe_port), &bdp->buf);
+ qe_iowrite16be(0, &bdp->length);
}
/*
@@ -657,78 +662,74 @@ static void qe_uart_init_ucc(struct uart_qe_port *qe_port)
ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX);
/* Program the UCC UART parameter RAM */
- out_8(&uccup->common.rbmr, UCC_BMR_GBL | UCC_BMR_BO_BE);
- out_8(&uccup->common.tbmr, UCC_BMR_GBL | UCC_BMR_BO_BE);
- out_be16(&uccup->common.mrblr, qe_port->rx_fifosize);
- out_be16(&uccup->maxidl, 0x10);
- out_be16(&uccup->brkcr, 1);
- out_be16(&uccup->parec, 0);
- out_be16(&uccup->frmec, 0);
- out_be16(&uccup->nosec, 0);
- out_be16(&uccup->brkec, 0);
- out_be16(&uccup->uaddr[0], 0);
- out_be16(&uccup->uaddr[1], 0);
- out_be16(&uccup->toseq, 0);
+ qe_iowrite8(UCC_BMR_GBL | UCC_BMR_BO_BE, &uccup->common.rbmr);
+ qe_iowrite8(UCC_BMR_GBL | UCC_BMR_BO_BE, &uccup->common.tbmr);
+ qe_iowrite16be(qe_port->rx_fifosize, &uccup->common.mrblr);
+ qe_iowrite16be(0x10, &uccup->maxidl);
+ qe_iowrite16be(1, &uccup->brkcr);
+ qe_iowrite16be(0, &uccup->parec);
+ qe_iowrite16be(0, &uccup->frmec);
+ qe_iowrite16be(0, &uccup->nosec);
+ qe_iowrite16be(0, &uccup->brkec);
+ qe_iowrite16be(0, &uccup->uaddr[0]);
+ qe_iowrite16be(0, &uccup->uaddr[1]);
+ qe_iowrite16be(0, &uccup->toseq);
for (i = 0; i < 8; i++)
- out_be16(&uccup->cchars[i], 0xC000);
- out_be16(&uccup->rccm, 0xc0ff);
+ qe_iowrite16be(0xC000, &uccup->cchars[i]);
+ qe_iowrite16be(0xc0ff, &uccup->rccm);
/* Configure the GUMR registers for UART */
if (soft_uart) {
/* Soft-UART requires a 1X multiplier for TX */
- clrsetbits_be32(&uccp->gumr_l,
- UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
- UCC_SLOW_GUMR_L_RDCR_MASK,
- UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_1 |
- UCC_SLOW_GUMR_L_RDCR_16);
+ qe_clrsetbits_be32(&uccp->gumr_l,
+ UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | UCC_SLOW_GUMR_L_RDCR_MASK,
+ UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_1 | UCC_SLOW_GUMR_L_RDCR_16);
- clrsetbits_be32(&uccp->gumr_h, UCC_SLOW_GUMR_H_RFW,
- UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX);
+ qe_clrsetbits_be32(&uccp->gumr_h, UCC_SLOW_GUMR_H_RFW,
+ UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX);
} else {
- clrsetbits_be32(&uccp->gumr_l,
- UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
- UCC_SLOW_GUMR_L_RDCR_MASK,
- UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_16 |
- UCC_SLOW_GUMR_L_RDCR_16);
+ qe_clrsetbits_be32(&uccp->gumr_l,
+ UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | UCC_SLOW_GUMR_L_RDCR_MASK,
+ UCC_SLOW_GUMR_L_MODE_UART | UCC_SLOW_GUMR_L_TDCR_16 | UCC_SLOW_GUMR_L_RDCR_16);
- clrsetbits_be32(&uccp->gumr_h,
- UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX,
- UCC_SLOW_GUMR_H_RFW);
+ qe_clrsetbits_be32(&uccp->gumr_h,
+ UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX,
+ UCC_SLOW_GUMR_H_RFW);
}
#ifdef LOOPBACK
- clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK,
- UCC_SLOW_GUMR_L_DIAG_LOOP);
- clrsetbits_be32(&uccp->gumr_h,
- UCC_SLOW_GUMR_H_CTSP | UCC_SLOW_GUMR_H_RSYN,
- UCC_SLOW_GUMR_H_CDS);
+ qe_clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK,
+ UCC_SLOW_GUMR_L_DIAG_LOOP);
+ qe_clrsetbits_be32(&uccp->gumr_h,
+ UCC_SLOW_GUMR_H_CTSP | UCC_SLOW_GUMR_H_RSYN,
+ UCC_SLOW_GUMR_H_CDS);
#endif
/* Disable rx interrupts and clear all pending events. */
- out_be16(&uccp->uccm, 0);
- out_be16(&uccp->ucce, 0xffff);
- out_be16(&uccp->udsr, 0x7e7e);
+ qe_iowrite16be(0, &uccp->uccm);
+ qe_iowrite16be(0xffff, &uccp->ucce);
+ qe_iowrite16be(0x7e7e, &uccp->udsr);
/* Initialize UPSMR */
- out_be16(&uccp->upsmr, 0);
+ qe_iowrite16be(0, &uccp->upsmr);
if (soft_uart) {
- out_be16(&uccup->supsmr, 0x30);
- out_be16(&uccup->res92, 0);
- out_be32(&uccup->rx_state, 0);
- out_be32(&uccup->rx_cnt, 0);
- out_8(&uccup->rx_bitmark, 0);
- out_8(&uccup->rx_length, 10);
- out_be32(&uccup->dump_ptr, 0x4000);
- out_8(&uccup->rx_temp_dlst_qe, 0);
- out_be32(&uccup->rx_frame_rem, 0);
- out_8(&uccup->rx_frame_rem_size, 0);
+ qe_iowrite16be(0x30, &uccup->supsmr);
+ qe_iowrite16be(0, &uccup->res92);
+ qe_iowrite32be(0, &uccup->rx_state);
+ qe_iowrite32be(0, &uccup->rx_cnt);
+ qe_iowrite8(0, &uccup->rx_bitmark);
+ qe_iowrite8(10, &uccup->rx_length);
+ qe_iowrite32be(0x4000, &uccup->dump_ptr);
+ qe_iowrite8(0, &uccup->rx_temp_dlst_qe);
+ qe_iowrite32be(0, &uccup->rx_frame_rem);
+ qe_iowrite8(0, &uccup->rx_frame_rem_size);
/* Soft-UART requires TX to be 1X */
- out_8(&uccup->tx_mode,
- UCC_UART_TX_STATE_UART | UCC_UART_TX_STATE_X1);
- out_be16(&uccup->tx_state, 0);
- out_8(&uccup->resD4, 0);
- out_be16(&uccup->resD5, 0);
+ qe_iowrite8(UCC_UART_TX_STATE_UART | UCC_UART_TX_STATE_X1,
+ &uccup->tx_mode);
+ qe_iowrite16be(0, &uccup->tx_state);
+ qe_iowrite8(0, &uccup->resD4);
+ qe_iowrite16be(0, &uccup->resD5);
/* Set UART mode.
* Enable receive and transmit.
@@ -742,22 +743,19 @@ static void qe_uart_init_ucc(struct uart_qe_port *qe_port)
* ...
* 6.Receiver must use 16x over sampling
*/
- clrsetbits_be32(&uccp->gumr_l,
- UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK |
- UCC_SLOW_GUMR_L_RDCR_MASK,
- UCC_SLOW_GUMR_L_MODE_QMC | UCC_SLOW_GUMR_L_TDCR_16 |
- UCC_SLOW_GUMR_L_RDCR_16);
+ qe_clrsetbits_be32(&uccp->gumr_l,
+ UCC_SLOW_GUMR_L_MODE_MASK | UCC_SLOW_GUMR_L_TDCR_MASK | UCC_SLOW_GUMR_L_RDCR_MASK,
+ UCC_SLOW_GUMR_L_MODE_QMC | UCC_SLOW_GUMR_L_TDCR_16 | UCC_SLOW_GUMR_L_RDCR_16);
- clrsetbits_be32(&uccp->gumr_h,
- UCC_SLOW_GUMR_H_RFW | UCC_SLOW_GUMR_H_RSYN,
- UCC_SLOW_GUMR_H_SUART | UCC_SLOW_GUMR_H_TRX |
- UCC_SLOW_GUMR_H_TTX | UCC_SLOW_GUMR_H_TFL);
+ qe_clrsetbits_be32(&uccp->gumr_h,
+ UCC_SLOW_GUMR_H_RFW | UCC_SLOW_GUMR_H_RSYN,
+ UCC_SLOW_GUMR_H_SUART | UCC_SLOW_GUMR_H_TRX | UCC_SLOW_GUMR_H_TTX | UCC_SLOW_GUMR_H_TFL);
#ifdef LOOPBACK
- clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK,
- UCC_SLOW_GUMR_L_DIAG_LOOP);
- clrbits32(&uccp->gumr_h, UCC_SLOW_GUMR_H_CTSP |
- UCC_SLOW_GUMR_H_CDS);
+ qe_clrsetbits_be32(&uccp->gumr_l, UCC_SLOW_GUMR_L_DIAG_MASK,
+ UCC_SLOW_GUMR_L_DIAG_LOOP);
+ qe_clrbits_be32(&uccp->gumr_h,
+ UCC_SLOW_GUMR_H_CTSP | UCC_SLOW_GUMR_H_CDS);
#endif
cecr_subblock = ucc_slow_get_qe_cr_subblock(qe_port->ucc_num);
@@ -800,7 +798,7 @@ static int qe_uart_startup(struct uart_port *port)
}
/* Startup rx-int */
- setbits16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX);
+ qe_setbits_be16(&qe_port->uccp->uccm, UCC_UART_UCCE_RX);
ucc_slow_enable(qe_port->us_private, COMM_DIR_RX_AND_TX);
return 0;
@@ -836,7 +834,7 @@ static void qe_uart_shutdown(struct uart_port *port)
/* Stop uarts */
ucc_slow_disable(qe_port->us_private, COMM_DIR_RX_AND_TX);
- clrbits16(&uccp->uccm, UCC_UART_UCCE_TX | UCC_UART_UCCE_RX);
+ qe_clrbits_be16(&uccp->uccm, UCC_UART_UCCE_TX | UCC_UART_UCCE_RX);
/* Shut them really down and reinit buffer descriptors */
ucc_slow_graceful_stop_tx(qe_port->us_private);
@@ -856,9 +854,9 @@ static void qe_uart_set_termios(struct uart_port *port,
struct ucc_slow __iomem *uccp = qe_port->uccp;
unsigned int baud;
unsigned long flags;
- u16 upsmr = in_be16(&uccp->upsmr);
+ u16 upsmr = qe_ioread16be(&uccp->upsmr);
struct ucc_uart_pram __iomem *uccup = qe_port->uccup;
- u16 supsmr = in_be16(&uccup->supsmr);
+ u16 supsmr = qe_ioread16be(&uccup->supsmr);
u8 char_length = 2; /* 1 + CL + PEN + 1 + SL */
/* Character length programmed into the mode register is the
@@ -956,10 +954,10 @@ static void qe_uart_set_termios(struct uart_port *port,
/* Update the per-port timeout. */
uart_update_timeout(port, termios->c_cflag, baud);
- out_be16(&uccp->upsmr, upsmr);
+ qe_iowrite16be(upsmr, &uccp->upsmr);
if (soft_uart) {
- out_be16(&uccup->supsmr, supsmr);
- out_8(&uccup->rx_length, char_length);
+ qe_iowrite16be(supsmr, &uccup->supsmr);
+ qe_iowrite8(char_length, &uccup->rx_length);
/* Soft-UART requires a 1X multiplier for TX */
qe_setbrg(qe_port->us_info.rx_clock, baud, 16);
@@ -1101,6 +1099,8 @@ static const struct uart_ops qe_uart_pops = {
.verify_port = qe_uart_verify_port,
};
+
+#ifdef CONFIG_PPC32
/*
* Obtain the SOC model number and revision level
*
@@ -1188,70 +1188,86 @@ static void uart_firmware_cont(const struct firmware *fw, void *context)
release_firmware(fw);
}
+static int soft_uart_init(struct platform_device *ofdev)
+{
+ struct device_node *np = ofdev->dev.of_node;
+ struct qe_firmware_info *qe_fw_info;
+ int ret;
+
+ if (of_find_property(np, "soft-uart", NULL)) {
+ dev_dbg(&ofdev->dev, "using Soft-UART mode\n");
+ soft_uart = 1;
+ } else {
+ return 0;
+ }
+
+ qe_fw_info = qe_get_firmware_info();
+
+ /* Check if the firmware has been uploaded. */
+ if (qe_fw_info && strstr(qe_fw_info->id, "Soft-UART")) {
+ firmware_loaded = 1;
+ } else {
+ char filename[32];
+ unsigned int soc;
+ unsigned int rev_h;
+ unsigned int rev_l;
+
+ soc = soc_info(&rev_h, &rev_l);
+ if (!soc) {
+ dev_err(&ofdev->dev, "unknown CPU model\n");
+ return -ENXIO;
+ }
+ sprintf(filename, "fsl_qe_ucode_uart_%u_%u%u.bin",
+ soc, rev_h, rev_l);
+
+ dev_info(&ofdev->dev, "waiting for firmware %s\n",
+ filename);
+
+ /*
+ * We call request_firmware_nowait instead of
+ * request_firmware so that the driver can load and
+ * initialize the ports without holding up the rest of
+ * the kernel. If hotplug support is enabled in the
+ * kernel, then we use it.
+ */
+ ret = request_firmware_nowait(THIS_MODULE,
+ FW_ACTION_HOTPLUG, filename, &ofdev->dev,
+ GFP_KERNEL, &ofdev->dev, uart_firmware_cont);
+ if (ret) {
+ dev_err(&ofdev->dev,
+ "could not load firmware %s\n",
+ filename);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+#else /* !CONFIG_PPC32 */
+
+static int soft_uart_init(struct platform_device *ofdev)
+{
+ return 0;
+}
+
+#endif
+
+
static int ucc_uart_probe(struct platform_device *ofdev)
{
struct device_node *np = ofdev->dev.of_node;
- const unsigned int *iprop; /* Integer OF properties */
const char *sprop; /* String OF properties */
struct uart_qe_port *qe_port = NULL;
struct resource res;
+ u32 val;
int ret;
/*
* Determine if we need Soft-UART mode
*/
- if (of_find_property(np, "soft-uart", NULL)) {
- dev_dbg(&ofdev->dev, "using Soft-UART mode\n");
- soft_uart = 1;
- }
-
- /*
- * If we are using Soft-UART, determine if we need to upload the
- * firmware, too.
- */
- if (soft_uart) {
- struct qe_firmware_info *qe_fw_info;
-
- qe_fw_info = qe_get_firmware_info();
-
- /* Check if the firmware has been uploaded. */
- if (qe_fw_info && strstr(qe_fw_info->id, "Soft-UART")) {
- firmware_loaded = 1;
- } else {
- char filename[32];
- unsigned int soc;
- unsigned int rev_h;
- unsigned int rev_l;
-
- soc = soc_info(&rev_h, &rev_l);
- if (!soc) {
- dev_err(&ofdev->dev, "unknown CPU model\n");
- return -ENXIO;
- }
- sprintf(filename, "fsl_qe_ucode_uart_%u_%u%u.bin",
- soc, rev_h, rev_l);
-
- dev_info(&ofdev->dev, "waiting for firmware %s\n",
- filename);
-
- /*
- * We call request_firmware_nowait instead of
- * request_firmware so that the driver can load and
- * initialize the ports without holding up the rest of
- * the kernel. If hotplug support is enabled in the
- * kernel, then we use it.
- */
- ret = request_firmware_nowait(THIS_MODULE,
- FW_ACTION_HOTPLUG, filename, &ofdev->dev,
- GFP_KERNEL, &ofdev->dev, uart_firmware_cont);
- if (ret) {
- dev_err(&ofdev->dev,
- "could not load firmware %s\n",
- filename);
- return ret;
- }
- }
- }
+ ret = soft_uart_init(ofdev);
+ if (ret)
+ return ret;
qe_port = kzalloc(sizeof(struct uart_qe_port), GFP_KERNEL);
if (!qe_port) {
@@ -1274,23 +1290,20 @@ static int ucc_uart_probe(struct platform_device *ofdev)
/* Get the UCC number (device ID) */
/* UCCs are numbered 1-7 */
- iprop = of_get_property(np, "cell-index", NULL);
- if (!iprop) {
- iprop = of_get_property(np, "device-id", NULL);
- if (!iprop) {
- dev_err(&ofdev->dev, "UCC is unspecified in "
- "device tree\n");
+ if (of_property_read_u32(np, "cell-index", &val)) {
+ if (of_property_read_u32(np, "device-id", &val)) {
+ dev_err(&ofdev->dev, "UCC is unspecified in device tree\n");
ret = -EINVAL;
goto out_free;
}
}
- if ((*iprop < 1) || (*iprop > UCC_MAX_NUM)) {
- dev_err(&ofdev->dev, "no support for UCC%u\n", *iprop);
+ if (val < 1 || val > UCC_MAX_NUM) {
+ dev_err(&ofdev->dev, "no support for UCC%u\n", val);
ret = -ENODEV;
goto out_free;
}
- qe_port->ucc_num = *iprop - 1;
+ qe_port->ucc_num = val - 1;
/*
* In the future, we should not require the BRG to be specified in the
@@ -1334,13 +1347,12 @@ static int ucc_uart_probe(struct platform_device *ofdev)
}
/* Get the port number, numbered 0-3 */
- iprop = of_get_property(np, "port-number", NULL);
- if (!iprop) {
+ if (of_property_read_u32(np, "port-number", &val)) {
dev_err(&ofdev->dev, "missing port-number in device tree\n");
ret = -EINVAL;
goto out_free;
}
- qe_port->port.line = *iprop;
+ qe_port->port.line = val;
if (qe_port->port.line >= UCC_MAX_UART) {
dev_err(&ofdev->dev, "port-number must be 0-%u\n",
UCC_MAX_UART - 1);
@@ -1370,31 +1382,36 @@ static int ucc_uart_probe(struct platform_device *ofdev)
}
}
- iprop = of_get_property(np, "brg-frequency", NULL);
- if (!iprop) {
+ if (of_property_read_u32(np, "brg-frequency", &val)) {
dev_err(&ofdev->dev,
"missing brg-frequency in device tree\n");
ret = -EINVAL;
goto out_np;
}
- if (*iprop)
- qe_port->port.uartclk = *iprop;
+ if (val)
+ qe_port->port.uartclk = val;
else {
+ if (!IS_ENABLED(CONFIG_PPC32)) {
+ dev_err(&ofdev->dev,
+ "invalid brg-frequency in device tree\n");
+ ret = -EINVAL;
+ goto out_np;
+ }
+
/*
* Older versions of U-Boot do not initialize the brg-frequency
* property, so in this case we assume the BRG frequency is
* half the QE bus frequency.
*/
- iprop = of_get_property(np, "bus-frequency", NULL);
- if (!iprop) {
+ if (of_property_read_u32(np, "bus-frequency", &val)) {
dev_err(&ofdev->dev,
"missing QE bus-frequency in device tree\n");
ret = -EINVAL;
goto out_np;
}
- if (*iprop)
- qe_port->port.uartclk = *iprop / 2;
+ if (val)
+ qe_port->port.uartclk = val / 2;
else {
dev_err(&ofdev->dev,
"invalid QE bus-frequency in device tree\n");
diff --git a/include/soc/fsl/cpm.h b/include/soc/fsl/cpm.h
new file mode 100644
index 0000000..4c24ea8
--- /dev/null
+++ b/include/soc/fsl/cpm.h
@@ -0,0 +1,171 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __CPM_H
+#define __CPM_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/of.h>
+#include <soc/fsl/qe/qe.h>
+
+/*
+ * SPI Parameter RAM common to QE and CPM.
+ */
+struct spi_pram {
+ __be16 rbase; /* Rx Buffer descriptor base address */
+ __be16 tbase; /* Tx Buffer descriptor base address */
+ u8 rfcr; /* Rx function code */
+ u8 tfcr; /* Tx function code */
+ __be16 mrblr; /* Max receive buffer length */
+ __be32 rstate; /* Internal */
+ __be32 rdp; /* Internal */
+ __be16 rbptr; /* Internal */
+ __be16 rbc; /* Internal */
+ __be32 rxtmp; /* Internal */
+ __be32 tstate; /* Internal */
+ __be32 tdp; /* Internal */
+ __be16 tbptr; /* Internal */
+ __be16 tbc; /* Internal */
+ __be32 txtmp; /* Internal */
+ __be32 res; /* Tx temp. */
+ __be16 rpbase; /* Relocation pointer (CPM1 only) */
+ __be16 res1; /* Reserved */
+};
+
+/*
+ * USB Controller pram common to QE and CPM.
+ */
+struct usb_ctlr {
+ u8 usb_usmod;
+ u8 usb_usadr;
+ u8 usb_uscom;
+ u8 res1[1];
+ __be16 usb_usep[4];
+ u8 res2[4];
+ __be16 usb_usber;
+ u8 res3[2];
+ __be16 usb_usbmr;
+ u8 res4[1];
+ u8 usb_usbs;
+ /* Fields down below are QE-only */
+ __be16 usb_ussft;
+ u8 res5[2];
+ __be16 usb_usfrn;
+ u8 res6[0x22];
+} __attribute__ ((packed));
+
+/*
+ * Function code bits, usually generic to devices.
+ */
+#ifdef CONFIG_CPM1
+#define CPMFCR_GBL ((u_char)0x00) /* Flag doesn't exist in CPM1 */
+#define CPMFCR_TC2 ((u_char)0x00) /* Flag doesn't exist in CPM1 */
+#define CPMFCR_DTB ((u_char)0x00) /* Flag doesn't exist in CPM1 */
+#define CPMFCR_BDB ((u_char)0x00) /* Flag doesn't exist in CPM1 */
+#else
+#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */
+#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */
+#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */
+#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */
+#endif
+#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */
+
+/* Opcodes common to CPM1 and CPM2
+*/
+#define CPM_CR_INIT_TRX ((ushort)0x0000)
+#define CPM_CR_INIT_RX ((ushort)0x0001)
+#define CPM_CR_INIT_TX ((ushort)0x0002)
+#define CPM_CR_HUNT_MODE ((ushort)0x0003)
+#define CPM_CR_STOP_TX ((ushort)0x0004)
+#define CPM_CR_GRA_STOP_TX ((ushort)0x0005)
+#define CPM_CR_RESTART_TX ((ushort)0x0006)
+#define CPM_CR_CLOSE_RX_BD ((ushort)0x0007)
+#define CPM_CR_SET_GADDR ((ushort)0x0008)
+#define CPM_CR_SET_TIMER ((ushort)0x0008)
+#define CPM_CR_STOP_IDMA ((ushort)0x000b)
+
+/* Buffer descriptors used by many of the CPM protocols. */
+typedef struct cpm_buf_desc {
+ ushort cbd_sc; /* Status and Control */
+ ushort cbd_datlen; /* Data length in buffer */
+ uint cbd_bufaddr; /* Buffer address in host memory */
+} cbd_t;
+
+/* Buffer descriptor control/status used by serial
+ */
+
+#define BD_SC_EMPTY (0x8000) /* Receive is empty */
+#define BD_SC_READY (0x8000) /* Transmit is ready */
+#define BD_SC_WRAP (0x2000) /* Last buffer descriptor */
+#define BD_SC_INTRPT (0x1000) /* Interrupt on change */
+#define BD_SC_LAST (0x0800) /* Last buffer in frame */
+#define BD_SC_TC (0x0400) /* Transmit CRC */
+#define BD_SC_CM (0x0200) /* Continuous mode */
+#define BD_SC_ID (0x0100) /* Rec'd too many idles */
+#define BD_SC_P (0x0100) /* xmt preamble */
+#define BD_SC_BR (0x0020) /* Break received */
+#define BD_SC_FR (0x0010) /* Framing error */
+#define BD_SC_PR (0x0008) /* Parity error */
+#define BD_SC_NAK (0x0004) /* NAK - did not respond */
+#define BD_SC_OV (0x0002) /* Overrun */
+#define BD_SC_UN (0x0002) /* Underrun */
+#define BD_SC_CD (0x0001) /* */
+#define BD_SC_CL (0x0001) /* Collision */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_RX_EMPTY (0x8000)
+#define BD_ENET_RX_WRAP (0x2000)
+#define BD_ENET_RX_INTR (0x1000)
+#define BD_ENET_RX_LAST (0x0800)
+#define BD_ENET_RX_FIRST (0x0400)
+#define BD_ENET_RX_MISS (0x0100)
+#define BD_ENET_RX_BC (0x0080) /* FCC Only */
+#define BD_ENET_RX_MC (0x0040) /* FCC Only */
+#define BD_ENET_RX_LG (0x0020)
+#define BD_ENET_RX_NO (0x0010)
+#define BD_ENET_RX_SH (0x0008)
+#define BD_ENET_RX_CR (0x0004)
+#define BD_ENET_RX_OV (0x0002)
+#define BD_ENET_RX_CL (0x0001)
+#define BD_ENET_RX_STATS (0x01ff) /* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_TX_READY (0x8000)
+#define BD_ENET_TX_PAD (0x4000)
+#define BD_ENET_TX_WRAP (0x2000)
+#define BD_ENET_TX_INTR (0x1000)
+#define BD_ENET_TX_LAST (0x0800)
+#define BD_ENET_TX_TC (0x0400)
+#define BD_ENET_TX_DEF (0x0200)
+#define BD_ENET_TX_HB (0x0100)
+#define BD_ENET_TX_LC (0x0080)
+#define BD_ENET_TX_RL (0x0040)
+#define BD_ENET_TX_RCMASK (0x003c)
+#define BD_ENET_TX_UN (0x0002)
+#define BD_ENET_TX_CSL (0x0001)
+#define BD_ENET_TX_STATS (0x03ff) /* All status bits */
+
+/* Buffer descriptor control/status used by Transparent mode SCC.
+ */
+#define BD_SCC_TX_LAST (0x0800)
+
+/* Buffer descriptor control/status used by I2C.
+ */
+#define BD_I2C_START (0x0400)
+
+#ifdef CONFIG_CPM
+int cpm_command(u32 command, u8 opcode);
+#else
+static inline int cpm_command(u32 command, u8 opcode)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_CPM */
+
+int cpm2_gpiochip_add32(struct device *dev);
+
+#endif
diff --git a/include/soc/fsl/qe/qe.h b/include/soc/fsl/qe/qe.h
index c1036d1..e282ac0 100644
--- a/include/soc/fsl/qe/qe.h
+++ b/include/soc/fsl/qe/qe.h
@@ -17,7 +17,7 @@
#include <linux/spinlock.h>
#include <linux/errno.h>
#include <linux/err.h>
-#include <asm/cpm.h>
+#include <soc/fsl/cpm.h>
#include <soc/fsl/qe/immap_qe.h>
#include <linux/of.h>
#include <linux/of_address.h>
@@ -98,26 +98,25 @@ static inline void qe_reset(void) {}
int cpm_muram_init(void);
#if defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE)
-unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
-int cpm_muram_free(unsigned long offset);
-unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
+s32 cpm_muram_alloc(unsigned long size, unsigned long align);
+void cpm_muram_free(s32 offset);
+s32 cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
void __iomem *cpm_muram_addr(unsigned long offset);
unsigned long cpm_muram_offset(void __iomem *addr);
dma_addr_t cpm_muram_dma(void __iomem *addr);
#else
-static inline unsigned long cpm_muram_alloc(unsigned long size,
- unsigned long align)
+static inline s32 cpm_muram_alloc(unsigned long size,
+ unsigned long align)
{
return -ENOSYS;
}
-static inline int cpm_muram_free(unsigned long offset)
+static inline void cpm_muram_free(s32 offset)
{
- return -ENOSYS;
}
-static inline unsigned long cpm_muram_alloc_fixed(unsigned long offset,
- unsigned long size)
+static inline s32 cpm_muram_alloc_fixed(unsigned long offset,
+ unsigned long size)
{
return -ENOSYS;
}
@@ -241,21 +240,37 @@ static inline int qe_alive_during_sleep(void)
#define qe_muram_offset cpm_muram_offset
#define qe_muram_dma cpm_muram_dma
-#define qe_setbits32(_addr, _v) iowrite32be(ioread32be(_addr) | (_v), (_addr))
-#define qe_clrbits32(_addr, _v) iowrite32be(ioread32be(_addr) & ~(_v), (_addr))
+#ifdef CONFIG_PPC32
+#define qe_iowrite8(val, addr) out_8(addr, val)
+#define qe_iowrite16be(val, addr) out_be16(addr, val)
+#define qe_iowrite32be(val, addr) out_be32(addr, val)
+#define qe_ioread8(addr) in_8(addr)
+#define qe_ioread16be(addr) in_be16(addr)
+#define qe_ioread32be(addr) in_be32(addr)
+#else
+#define qe_iowrite8(val, addr) iowrite8(val, addr)
+#define qe_iowrite16be(val, addr) iowrite16be(val, addr)
+#define qe_iowrite32be(val, addr) iowrite32be(val, addr)
+#define qe_ioread8(addr) ioread8(addr)
+#define qe_ioread16be(addr) ioread16be(addr)
+#define qe_ioread32be(addr) ioread32be(addr)
+#endif
-#define qe_setbits16(_addr, _v) iowrite16be(ioread16be(_addr) | (_v), (_addr))
-#define qe_clrbits16(_addr, _v) iowrite16be(ioread16be(_addr) & ~(_v), (_addr))
+#define qe_setbits_be32(_addr, _v) qe_iowrite32be(qe_ioread32be(_addr) | (_v), (_addr))
+#define qe_clrbits_be32(_addr, _v) qe_iowrite32be(qe_ioread32be(_addr) & ~(_v), (_addr))
-#define qe_setbits8(_addr, _v) iowrite8(ioread8(_addr) | (_v), (_addr))
-#define qe_clrbits8(_addr, _v) iowrite8(ioread8(_addr) & ~(_v), (_addr))
+#define qe_setbits_be16(_addr, _v) qe_iowrite16be(qe_ioread16be(_addr) | (_v), (_addr))
+#define qe_clrbits_be16(_addr, _v) qe_iowrite16be(qe_ioread16be(_addr) & ~(_v), (_addr))
-#define qe_clrsetbits32(addr, clear, set) \
- iowrite32be((ioread32be(addr) & ~(clear)) | (set), (addr))
-#define qe_clrsetbits16(addr, clear, set) \
- iowrite16be((ioread16be(addr) & ~(clear)) | (set), (addr))
-#define qe_clrsetbits8(addr, clear, set) \
- iowrite8((ioread8(addr) & ~(clear)) | (set), (addr))
+#define qe_setbits_8(_addr, _v) qe_iowrite8(qe_ioread8(_addr) | (_v), (_addr))
+#define qe_clrbits_8(_addr, _v) qe_iowrite8(qe_ioread8(_addr) & ~(_v), (_addr))
+
+#define qe_clrsetbits_be32(addr, clear, set) \
+ qe_iowrite32be((qe_ioread32be(addr) & ~(clear)) | (set), (addr))
+#define qe_clrsetbits_be16(addr, clear, set) \
+ qe_iowrite16be((qe_ioread16be(addr) & ~(clear)) | (set), (addr))
+#define qe_clrsetbits_8(addr, clear, set) \
+ qe_iowrite8((qe_ioread8(addr) & ~(clear)) | (set), (addr))
/* Structure that defines QE firmware binary files.
*
diff --git a/include/soc/fsl/qe/qe_ic.h b/include/soc/fsl/qe/qe_ic.h
deleted file mode 100644
index 714a9b8..0000000
--- a/include/soc/fsl/qe/qe_ic.h
+++ /dev/null
@@ -1,135 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Authors: Shlomi Gridish <gridish@freescale.com>
- * Li Yang <leoli@freescale.com>
- *
- * Description:
- * QE IC external definitions and structure.
- */
-#ifndef _ASM_POWERPC_QE_IC_H
-#define _ASM_POWERPC_QE_IC_H
-
-#include <linux/irq.h>
-
-struct device_node;
-struct qe_ic;
-
-#define NUM_OF_QE_IC_GROUPS 6
-
-/* Flags when we init the QE IC */
-#define QE_IC_SPREADMODE_GRP_W 0x00000001
-#define QE_IC_SPREADMODE_GRP_X 0x00000002
-#define QE_IC_SPREADMODE_GRP_Y 0x00000004
-#define QE_IC_SPREADMODE_GRP_Z 0x00000008
-#define QE_IC_SPREADMODE_GRP_RISCA 0x00000010
-#define QE_IC_SPREADMODE_GRP_RISCB 0x00000020
-
-#define QE_IC_LOW_SIGNAL 0x00000100
-#define QE_IC_HIGH_SIGNAL 0x00000200
-
-#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH 0x00001000
-#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH 0x00002000
-#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH 0x00004000
-#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH 0x00008000
-#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH 0x00010000
-#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH 0x00020000
-#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH 0x00040000
-#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH 0x00080000
-#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH 0x00100000
-#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH 0x00200000
-#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH 0x00400000
-#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH 0x00800000
-#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT (12)
-
-/* QE interrupt sources groups */
-enum qe_ic_grp_id {
- QE_IC_GRP_W = 0, /* QE interrupt controller group W */
- QE_IC_GRP_X, /* QE interrupt controller group X */
- QE_IC_GRP_Y, /* QE interrupt controller group Y */
- QE_IC_GRP_Z, /* QE interrupt controller group Z */
- QE_IC_GRP_RISCA, /* QE interrupt controller RISC group A */
- QE_IC_GRP_RISCB /* QE interrupt controller RISC group B */
-};
-
-#ifdef CONFIG_QUICC_ENGINE
-void qe_ic_init(struct device_node *node, unsigned int flags,
- void (*low_handler)(struct irq_desc *desc),
- void (*high_handler)(struct irq_desc *desc));
-unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic);
-unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic);
-#else
-static inline void qe_ic_init(struct device_node *node, unsigned int flags,
- void (*low_handler)(struct irq_desc *desc),
- void (*high_handler)(struct irq_desc *desc))
-{}
-static inline unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
-{ return 0; }
-static inline unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
-{ return 0; }
-#endif /* CONFIG_QUICC_ENGINE */
-
-void qe_ic_set_highest_priority(unsigned int virq, int high);
-int qe_ic_set_priority(unsigned int virq, unsigned int priority);
-int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high);
-
-static inline void qe_ic_cascade_low_ipic(struct irq_desc *desc)
-{
- struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
- unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
-
- if (cascade_irq != NO_IRQ)
- generic_handle_irq(cascade_irq);
-}
-
-static inline void qe_ic_cascade_high_ipic(struct irq_desc *desc)
-{
- struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
- unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
-
- if (cascade_irq != NO_IRQ)
- generic_handle_irq(cascade_irq);
-}
-
-static inline void qe_ic_cascade_low_mpic(struct irq_desc *desc)
-{
- struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
- unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
- struct irq_chip *chip = irq_desc_get_chip(desc);
-
- if (cascade_irq != NO_IRQ)
- generic_handle_irq(cascade_irq);
-
- chip->irq_eoi(&desc->irq_data);
-}
-
-static inline void qe_ic_cascade_high_mpic(struct irq_desc *desc)
-{
- struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
- unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
- struct irq_chip *chip = irq_desc_get_chip(desc);
-
- if (cascade_irq != NO_IRQ)
- generic_handle_irq(cascade_irq);
-
- chip->irq_eoi(&desc->irq_data);
-}
-
-static inline void qe_ic_cascade_muxed_mpic(struct irq_desc *desc)
-{
- struct qe_ic *qe_ic = irq_desc_get_handler_data(desc);
- unsigned int cascade_irq;
- struct irq_chip *chip = irq_desc_get_chip(desc);
-
- cascade_irq = qe_ic_get_high_irq(qe_ic);
- if (cascade_irq == NO_IRQ)
- cascade_irq = qe_ic_get_low_irq(qe_ic);
-
- if (cascade_irq != NO_IRQ)
- generic_handle_irq(cascade_irq);
-
- chip->irq_eoi(&desc->irq_data);
-}
-
-#endif /* _ASM_POWERPC_QE_IC_H */
diff --git a/include/soc/fsl/qe/ucc_fast.h b/include/soc/fsl/qe/ucc_fast.h
index e9cc460..ba0e838 100644
--- a/include/soc/fsl/qe/ucc_fast.h
+++ b/include/soc/fsl/qe/ucc_fast.h
@@ -188,9 +188,9 @@ struct ucc_fast_private {
int stopped_tx; /* Whether channel has been stopped for Tx
(STOP_TX, etc.) */
int stopped_rx; /* Whether channel has been stopped for Rx */
- u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
+ s32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
virtual fifo */
- u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
+ s32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
virtual fifo */
#ifdef STATISTICS
u32 tx_frames; /* Transmitted frames counter. */
diff --git a/include/soc/fsl/qe/ucc_slow.h b/include/soc/fsl/qe/ucc_slow.h
index 8696fde..d187a6b 100644
--- a/include/soc/fsl/qe/ucc_slow.h
+++ b/include/soc/fsl/qe/ucc_slow.h
@@ -185,7 +185,7 @@ struct ucc_slow_private {
struct ucc_slow_info *us_info;
struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */
struct ucc_slow_pram *us_pram; /* a pointer to the parameter RAM */
- u32 us_pram_offset;
+ s32 us_pram_offset;
int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
int enabled_rx; /* Whether channel is enabled for Rx (ENR) */
int stopped_tx; /* Whether channel has been stopped for Tx
@@ -194,8 +194,8 @@ struct ucc_slow_private {
struct list_head confQ; /* frames passed to chip waiting for tx */
u32 first_tx_bd_mask; /* mask is used in Tx routine to save status
and length for first BD in a frame */
- u32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */
- u32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */
+ s32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */
+ s32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */
struct qe_bd *confBd; /* next BD for confirm after Tx */
struct qe_bd *tx_bd; /* next BD for new Tx request */
struct qe_bd *rx_bd; /* next BD to collect after Rx */
