Merge branch 'stmmac-ptp-fix'
Mohammad Athari Bin Ismail says:
====================
Fix PTP issue in stmmac
This patch series to fix PTP issue in stmmac related to:
1/ PTP clock source configuration during initialization.
2/ PTP initialization during resume from suspend.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 54071ae..639a753 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -890,6 +890,9 @@ static int stmmac_init_ptp(struct stmmac_priv *priv)
bool xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
int ret;
+ if (priv->plat->ptp_clk_freq_config)
+ priv->plat->ptp_clk_freq_config(priv);
+
ret = stmmac_init_tstamp_counter(priv, STMMAC_HWTS_ACTIVE);
if (ret)
return ret;
@@ -912,8 +915,6 @@ static int stmmac_init_ptp(struct stmmac_priv *priv)
priv->hwts_tx_en = 0;
priv->hwts_rx_en = 0;
- stmmac_ptp_register(priv);
-
return 0;
}
@@ -3239,7 +3240,7 @@ static int stmmac_fpe_start_wq(struct stmmac_priv *priv)
/**
* stmmac_hw_setup - setup mac in a usable state.
* @dev : pointer to the device structure.
- * @init_ptp: initialize PTP if set
+ * @ptp_register: register PTP if set
* Description:
* this is the main function to setup the HW in a usable state because the
* dma engine is reset, the core registers are configured (e.g. AXI,
@@ -3249,7 +3250,7 @@ static int stmmac_fpe_start_wq(struct stmmac_priv *priv)
* 0 on success and an appropriate (-)ve integer as defined in errno.h
* file on failure.
*/
-static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
+static int stmmac_hw_setup(struct net_device *dev, bool ptp_register)
{
struct stmmac_priv *priv = netdev_priv(dev);
u32 rx_cnt = priv->plat->rx_queues_to_use;
@@ -3306,13 +3307,13 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp)
stmmac_mmc_setup(priv);
- if (init_ptp) {
- ret = stmmac_init_ptp(priv);
- if (ret == -EOPNOTSUPP)
- netdev_warn(priv->dev, "PTP not supported by HW\n");
- else if (ret)
- netdev_warn(priv->dev, "PTP init failed\n");
- }
+ ret = stmmac_init_ptp(priv);
+ if (ret == -EOPNOTSUPP)
+ netdev_warn(priv->dev, "PTP not supported by HW\n");
+ else if (ret)
+ netdev_warn(priv->dev, "PTP init failed\n");
+ else if (ptp_register)
+ stmmac_ptp_register(priv);
priv->eee_tw_timer = STMMAC_DEFAULT_TWT_LS;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
index 0d24ebd..1c9f02f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c
@@ -297,9 +297,6 @@ void stmmac_ptp_register(struct stmmac_priv *priv)
{
int i;
- if (priv->plat->ptp_clk_freq_config)
- priv->plat->ptp_clk_freq_config(priv);
-
for (i = 0; i < priv->dma_cap.pps_out_num; i++) {
if (i >= STMMAC_PPS_MAX)
break;
