sparc32,sun4m: irq, smp files cleanup
- drop filename in file header
- drop unused includes
- add description of sun4m interrupts (from davem)
- add KERN_* to printk
- fix spaces => tabs
- add spaces after reserved words
- drop all externs, they are now in header files
This is partly based on a patch from: David Miller <davem@davemloft.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c
index 7f3b97f..3c6657a 100644
--- a/arch/sparc/kernel/sun4m_irq.c
+++ b/arch/sparc/kernel/sun4m_irq.c
@@ -1,5 +1,5 @@
-/* sun4m_irq.c
- * arch/sparc/kernel/sun4m_irq.c:
+/*
+ * sun4m irq support
*
* djhr: Hacked out of irq.c into a CPU dependent version.
*
@@ -9,101 +9,44 @@
* Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk)
*/
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <linux/kernel_stat.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/psr.h>
-#include <asm/vaddrs.h>
#include <asm/timer.h>
-#include <asm/openprom.h>
-#include <asm/oplib.h>
#include <asm/traps.h>
#include <asm/pgalloc.h>
#include <asm/pgtable.h>
-#include <asm/smp.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/cacheflush.h>
#include "irq.h"
+#include "kernel.h"
-struct sun4m_irq_percpu {
- u32 pending;
- u32 clear;
- u32 set;
-};
-
-struct sun4m_irq_global {
- u32 pending;
- u32 mask;
- u32 mask_clear;
- u32 mask_set;
- u32 interrupt_target;
-};
-
-/* Code in entry.S needs to get at these register mappings. */
-struct sun4m_irq_percpu __iomem *sun4m_irq_percpu[SUN4M_NCPUS];
-struct sun4m_irq_global __iomem *sun4m_irq_global;
-
-/* Dave Redman (djhr@tadpole.co.uk)
- * The sun4m interrupt registers.
- */
-#define SUN4M_INT_ENABLE 0x80000000
-#define SUN4M_INT_E14 0x00000080
-#define SUN4M_INT_E10 0x00080000
-
-#define SUN4M_HARD_INT(x) (0x000000001 << (x))
-#define SUN4M_SOFT_INT(x) (0x000010000 << (x))
-
-#define SUN4M_INT_MASKALL 0x80000000 /* mask all interrupts */
-#define SUN4M_INT_MODULE_ERR 0x40000000 /* module error */
-#define SUN4M_INT_M2S_WRITE_ERR 0x20000000 /* write buffer error */
-#define SUN4M_INT_ECC_ERR 0x10000000 /* ecc memory error */
-#define SUN4M_INT_VME_ERR 0x08000000 /* vme async error */
-#define SUN4M_INT_FLOPPY 0x00400000 /* floppy disk */
-#define SUN4M_INT_MODULE 0x00200000 /* module interrupt */
-#define SUN4M_INT_VIDEO 0x00100000 /* onboard video */
-#define SUN4M_INT_REALTIME 0x00080000 /* system timer */
-#define SUN4M_INT_SCSI 0x00040000 /* onboard scsi */
-#define SUN4M_INT_AUDIO 0x00020000 /* audio/isdn */
-#define SUN4M_INT_ETHERNET 0x00010000 /* onboard ethernet */
-#define SUN4M_INT_SERIAL 0x00008000 /* serial ports */
-#define SUN4M_INT_KBDMS 0x00004000 /* keyboard/mouse */
-#define SUN4M_INT_SBUSBITS 0x00003F80 /* sbus int bits */
-#define SUN4M_INT_VMEBITS 0x0000007F /* vme int bits */
-
-#define SUN4M_INT_ERROR (SUN4M_INT_MODULE_ERR | \
- SUN4M_INT_M2S_WRITE_ERR | \
- SUN4M_INT_ECC_ERR | \
- SUN4M_INT_VME_ERR)
-
-#define SUN4M_INT_SBUS(x) (1 << (x+7))
-#define SUN4M_INT_VME(x) (1 << (x))
-
-/* Interrupt levels used by OBP */
-#define OBP_INT_LEVEL_SOFT 0x10
-#define OBP_INT_LEVEL_ONBOARD 0x20
-#define OBP_INT_LEVEL_SBUS 0x30
-#define OBP_INT_LEVEL_VME 0x40
-
-/* Interrupt level assignment on sun4m:
+/* Sample sun4m IRQ layout:
+ *
+ * 0x22 - Power
+ * 0x24 - ESP SCSI
+ * 0x26 - Lance ethernet
+ * 0x2b - Floppy
+ * 0x2c - Zilog uart
+ * 0x32 - SBUS level 0
+ * 0x33 - Parallel port, SBUS level 1
+ * 0x35 - SBUS level 2
+ * 0x37 - SBUS level 3
+ * 0x39 - Audio, Graphics card, SBUS level 4
+ * 0x3b - SBUS level 5
+ * 0x3d - SBUS level 6
+ *
+ * Each interrupt source has a mask bit in the interrupt registers.
+ * When the mask bit is set, this blocks interrupt deliver. So you
+ * clear the bit to enable the interrupt.
+ *
+ * Interrupts numbered less than 0x10 are software triggered interrupts
+ * and unused by Linux.
+ *
+ * Interrupt level assignment on sun4m:
*
* level source
* ------------------------------------------------------------
- * 1 softint-1
+ * 1 softint-1
* 2 softint-2, VME/SBUS level 1
* 3 softint-3, VME/SBUS level 2
* 4 softint-4, onboard SCSI
@@ -138,10 +81,10 @@
* 'intr' property IRQ priority values from ss4, ss5, ss10, ss20, and
* Tadpole S3 GX systems.
*
- * esp: 0x24 onboard ESP SCSI
- * le: 0x26 onboard Lance ETHERNET
+ * esp: 0x24 onboard ESP SCSI
+ * le: 0x26 onboard Lance ETHERNET
* p9100: 0x32 SBUS level 1 P9100 video
- * bpp: 0x33 SBUS level 2 BPP parallel port device
+ * bpp: 0x33 SBUS level 2 BPP parallel port device
* DBRI: 0x39 SBUS level 5 DBRI ISDN audio
* SUNW,leo: 0x39 SBUS level 5 LEO video
* pcmcia: 0x3b SBUS level 6 PCMCIA controller
@@ -152,6 +95,66 @@
* power: 0x22 onboard power device (XXX unknown mask bit XXX)
*/
+
+struct sun4m_irq_percpu {
+ u32 pending;
+ u32 clear;
+ u32 set;
+};
+
+struct sun4m_irq_global {
+ u32 pending;
+ u32 mask;
+ u32 mask_clear;
+ u32 mask_set;
+ u32 interrupt_target;
+};
+
+/* Code in entry.S needs to get at these register mappings. */
+struct sun4m_irq_percpu __iomem *sun4m_irq_percpu[SUN4M_NCPUS];
+struct sun4m_irq_global __iomem *sun4m_irq_global;
+
+/* Dave Redman (djhr@tadpole.co.uk)
+ * The sun4m interrupt registers.
+ */
+#define SUN4M_INT_ENABLE 0x80000000
+#define SUN4M_INT_E14 0x00000080
+#define SUN4M_INT_E10 0x00080000
+
+#define SUN4M_HARD_INT(x) (0x000000001 << (x))
+#define SUN4M_SOFT_INT(x) (0x000010000 << (x))
+
+#define SUN4M_INT_MASKALL 0x80000000 /* mask all interrupts */
+#define SUN4M_INT_MODULE_ERR 0x40000000 /* module error */
+#define SUN4M_INT_M2S_WRITE_ERR 0x20000000 /* write buffer error */
+#define SUN4M_INT_ECC_ERR 0x10000000 /* ecc memory error */
+#define SUN4M_INT_VME_ERR 0x08000000 /* vme async error */
+#define SUN4M_INT_FLOPPY 0x00400000 /* floppy disk */
+#define SUN4M_INT_MODULE 0x00200000 /* module interrupt */
+#define SUN4M_INT_VIDEO 0x00100000 /* onboard video */
+#define SUN4M_INT_REALTIME 0x00080000 /* system timer */
+#define SUN4M_INT_SCSI 0x00040000 /* onboard scsi */
+#define SUN4M_INT_AUDIO 0x00020000 /* audio/isdn */
+#define SUN4M_INT_ETHERNET 0x00010000 /* onboard ethernet */
+#define SUN4M_INT_SERIAL 0x00008000 /* serial ports */
+#define SUN4M_INT_KBDMS 0x00004000 /* keyboard/mouse */
+#define SUN4M_INT_SBUSBITS 0x00003F80 /* sbus int bits */
+#define SUN4M_INT_VMEBITS 0x0000007F /* vme int bits */
+
+#define SUN4M_INT_ERROR (SUN4M_INT_MODULE_ERR | \
+ SUN4M_INT_M2S_WRITE_ERR | \
+ SUN4M_INT_ECC_ERR | \
+ SUN4M_INT_VME_ERR)
+
+#define SUN4M_INT_SBUS(x) (1 << (x+7))
+#define SUN4M_INT_VME(x) (1 << (x))
+
+/* Interrupt levels used by OBP */
+#define OBP_INT_LEVEL_SOFT 0x10
+#define OBP_INT_LEVEL_ONBOARD 0x20
+#define OBP_INT_LEVEL_SBUS 0x30
+#define OBP_INT_LEVEL_VME 0x40
+
static unsigned long irq_mask[0x50] = {
/* SMP */
0, SUN4M_SOFT_INT(1),
@@ -193,7 +196,7 @@
static unsigned long sun4m_get_irqmask(unsigned int irq)
{
unsigned long mask;
-
+
if (irq < 0x50)
mask = irq_mask[irq];
else
@@ -217,7 +220,7 @@
sbus_writel(mask, &sun4m_irq_global->mask_set);
else
sbus_writel(mask, &sun4m_irq_percpu[cpu]->set);
- local_irq_restore(flags);
+ local_irq_restore(flags);
}
static void sun4m_enable_irq(unsigned int irq_nr)
@@ -226,17 +229,17 @@
int cpu = smp_processor_id();
/* Dreadful floppy hack. When we use 0x2b instead of
- * 0x0b the system blows (it starts to whistle!).
- * So we continue to use 0x0b. Fixme ASAP. --P3
- */
- if (irq_nr != 0x0b) {
+ * 0x0b the system blows (it starts to whistle!).
+ * So we continue to use 0x0b. Fixme ASAP. --P3
+ */
+ if (irq_nr != 0x0b) {
mask = sun4m_get_irqmask(irq_nr);
local_irq_save(flags);
if (irq_nr > 15)
sbus_writel(mask, &sun4m_irq_global->mask_clear);
else
sbus_writel(mask, &sun4m_irq_percpu[cpu]->clear);
- local_irq_restore(flags);
+ local_irq_restore(flags);
} else {
local_irq_save(flags);
sbus_writel(SUN4M_INT_FLOPPY, &sun4m_irq_global->mask_clear);
@@ -260,7 +263,7 @@
/*12*/ SUN4M_INT_SERIAL | SUN4M_INT_KBDMS,
/*13*/ SUN4M_INT_SBUS(6) | SUN4M_INT_VME(6) | SUN4M_INT_AUDIO,
/*14*/ SUN4M_INT_E14,
-/*15*/ SUN4M_INT_ERROR
+/*15*/ SUN4M_INT_ERROR,
};
/* We assume the caller has disabled local interrupts when these are called,
@@ -280,12 +283,14 @@
static void sun4m_send_ipi(int cpu, int level)
{
unsigned long mask = sun4m_get_irqmask(level);
+
sbus_writel(mask, &sun4m_irq_percpu[cpu]->set);
}
static void sun4m_clear_ipi(int cpu, int level)
{
unsigned long mask = sun4m_get_irqmask(level);
+
sbus_writel(mask, &sun4m_irq_percpu[cpu]->clear);
}
@@ -314,7 +319,7 @@
static struct sun4m_timer_global __iomem *timers_global;
-#define TIMER_IRQ (OBP_INT_LEVEL_ONBOARD | 10)
+#define TIMER_IRQ (OBP_INT_LEVEL_ONBOARD | 10)
unsigned int lvl14_resolution = (((1000000/HZ) + 1) << 10);
@@ -407,7 +412,6 @@
#ifdef CONFIG_SMP
{
unsigned long flags;
- extern unsigned long lvl14_save[4];
struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)];
/* For SMP we use the level 14 ticker, however the bootup code
