ARM: OMAP2+: cleaned-up DT support of various ECC schemes
OMAP NAND driver support multiple ECC scheme, which can used in different
flavours, depending on in-build Hardware engines present on SoC.
This patch updates following in DT bindings related to sectionion of ecc-schemes
- ti,elm-id: replaces elm_id (maintains backward compatibility)
- ti,nand-ecc-opts: selection of h/w or s/w implementation of an ecc-scheme
depends on ti,elm-id. (supported values ham1, bch4, and bch8)
- maintain backward compatibility to deprecated DT bindings (sw, hw, hw-romcode)
Below table shows different flavours of ecc-schemes supported by OMAP devices
+---------------------------------------+---------------+---------------+
| ECC scheme |ECC calculation|Error detection|
+---------------------------------------+---------------+---------------+
|OMAP_ECC_HAM1_CODE_HW |H/W (GPMC) |S/W |
+---------------------------------------+---------------+---------------+
|OMAP_ECC_BCH8_CODE_HW_DETECTION_SW |H/W (GPMC) |S/W |
|(requires CONFIG_MTD_NAND_ECC_BCH) | | |
+---------------------------------------+---------------+---------------+
|OMAP_ECC_BCH8_CODE_HW |H/W (GPMC) |H/W (ELM) |
|(requires CONFIG_MTD_NAND_OMAP_BCH && | | |
| ti,elm-id in DT) | | |
+---------------------------------------+---------------+---------------+
To optimize footprint of omap2-nand driver, selection of some ECC schemes
also require enabling following Kconfigs, in addition to setting appropriate
DT bindings
- Kconfig:CONFIG_MTD_NAND_ECC_BCH error detection done in software
- Kconfig:CONFIG_MTD_NAND_OMAP_BCH error detection done by h/w engine
Signed-off-by: Pekon Gupta <pekon@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 579697a..c877129 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1341,14 +1341,6 @@
#ifdef CONFIG_MTD_NAND
-static const char * const nand_ecc_opts[] = {
- [OMAP_ECC_HAMMING_CODE_DEFAULT] = "sw",
- [OMAP_ECC_HAMMING_CODE_HW] = "hw",
- [OMAP_ECC_HAMMING_CODE_HW_ROMCODE] = "hw-romcode",
- [OMAP_ECC_BCH4_CODE_HW] = "bch4",
- [OMAP_ECC_BCH8_CODE_HW] = "bch8",
-};
-
static const char * const nand_xfer_types[] = {
[NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled",
[NAND_OMAP_POLLED] = "polled",
@@ -1378,13 +1370,41 @@
gpmc_nand_data->cs = val;
gpmc_nand_data->of_node = child;
- if (!of_property_read_string(child, "ti,nand-ecc-opt", &s))
- for (val = 0; val < ARRAY_SIZE(nand_ecc_opts); val++)
- if (!strcasecmp(s, nand_ecc_opts[val])) {
- gpmc_nand_data->ecc_opt = val;
- break;
- }
+ /* Detect availability of ELM module */
+ gpmc_nand_data->elm_of_node = of_parse_phandle(child, "ti,elm-id", 0);
+ if (gpmc_nand_data->elm_of_node == NULL)
+ gpmc_nand_data->elm_of_node =
+ of_parse_phandle(child, "elm_id", 0);
+ if (gpmc_nand_data->elm_of_node == NULL)
+ pr_warn("%s: ti,elm-id property not found\n", __func__);
+ /* select ecc-scheme for NAND */
+ if (of_property_read_string(child, "ti,nand-ecc-opt", &s)) {
+ pr_err("%s: ti,nand-ecc-opt not found\n", __func__);
+ return -ENODEV;
+ }
+ if (!strcmp(s, "ham1") || !strcmp(s, "sw") ||
+ !strcmp(s, "hw") || !strcmp(s, "hw-romcode"))
+ gpmc_nand_data->ecc_opt =
+ OMAP_ECC_HAM1_CODE_HW;
+ else if (!strcmp(s, "bch4"))
+ if (gpmc_nand_data->elm_of_node)
+ gpmc_nand_data->ecc_opt =
+ OMAP_ECC_BCH4_CODE_HW;
+ else
+ gpmc_nand_data->ecc_opt =
+ OMAP_ECC_BCH4_CODE_HW_DETECTION_SW;
+ else if (!strcmp(s, "bch8"))
+ if (gpmc_nand_data->elm_of_node)
+ gpmc_nand_data->ecc_opt =
+ OMAP_ECC_BCH8_CODE_HW;
+ else
+ gpmc_nand_data->ecc_opt =
+ OMAP_ECC_BCH8_CODE_HW_DETECTION_SW;
+ else
+ pr_err("%s: ti,nand-ecc-opt invalid value\n", __func__);
+
+ /* select data transfer mode for NAND controller */
if (!of_property_read_string(child, "ti,nand-xfer-type", &s))
for (val = 0; val < ARRAY_SIZE(nand_xfer_types); val++)
if (!strcasecmp(s, nand_xfer_types[val])) {
