Merge branch 'suspend' into test
diff --git a/drivers/acpi/hardware/hwsleep.c b/drivers/acpi/hardware/hwsleep.c
index dba3cfb..25dccdf 100644
--- a/drivers/acpi/hardware/hwsleep.c
+++ b/drivers/acpi/hardware/hwsleep.c
@@ -78,19 +78,17 @@
return_ACPI_STATUS(status);
}
- /* Set the vector */
+ /*
+ * According to the ACPI specification 2.0c and later, the 64-bit
+ * waking vector should be cleared and the 32-bit waking vector should
+ * be used, unless we want the wake-up code to be called by the BIOS in
+ * Protected Mode. Some systems (for example HP dv5-1004nr) are known
+ * to fail to resume if the 64-bit vector is used.
+ */
+ if (facs->version >= 1)
+ facs->xfirmware_waking_vector = 0;
- if ((facs->length < 32) || (!(facs->xfirmware_waking_vector))) {
- /*
- * ACPI 1.0 FACS or short table or optional X_ field is zero
- */
- facs->firmware_waking_vector = (u32) physical_address;
- } else {
- /*
- * ACPI 2.0 FACS with valid X_ field
- */
- facs->xfirmware_waking_vector = physical_address;
- }
+ facs->firmware_waking_vector = (u32)physical_address;
return_ACPI_STATUS(AE_OK);
}
@@ -134,20 +132,7 @@
}
/* Get the vector */
-
- if ((facs->length < 32) || (!(facs->xfirmware_waking_vector))) {
- /*
- * ACPI 1.0 FACS or short table or optional X_ field is zero
- */
- *physical_address =
- (acpi_physical_address) facs->firmware_waking_vector;
- } else {
- /*
- * ACPI 2.0 FACS with valid X_ field
- */
- *physical_address =
- (acpi_physical_address) facs->xfirmware_waking_vector;
- }
+ *physical_address = (acpi_physical_address)facs->firmware_waking_vector;
return_ACPI_STATUS(AE_OK);
}
@@ -627,6 +612,13 @@
}
/* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */
+ /*
+ * Some BIOSes assume that WAK_STS will be cleared on resume and use
+ * it to determine whether the system is rebooting or resuming. Clear
+ * it for compatibility.
+ */
+ acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1);
+
acpi_gbl_system_awake_and_running = TRUE;
/* Enable power button */
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index 4c21480..cc344d4 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -15,6 +15,7 @@
#include <linux/dmi.h>
#include <linux/device.h>
#include <linux/suspend.h>
+#include <linux/reboot.h>
#include <asm/io.h>
@@ -25,6 +26,36 @@
u8 sleep_states[ACPI_S_STATE_COUNT];
static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+static void acpi_sleep_tts_switch(u32 acpi_state)
+{
+ union acpi_object in_arg = { ACPI_TYPE_INTEGER };
+ struct acpi_object_list arg_list = { 1, &in_arg };
+ acpi_status status = AE_OK;
+
+ in_arg.integer.value = acpi_state;
+ status = acpi_evaluate_object(NULL, "\\_TTS", &arg_list, NULL);
+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+ /*
+ * OS can't evaluate the _TTS object correctly. Some warning
+ * message will be printed. But it won't break anything.
+ */
+ printk(KERN_NOTICE "Failure in evaluating _TTS object\n");
+ }
+}
+
+static int tts_notify_reboot(struct notifier_block *this,
+ unsigned long code, void *x)
+{
+ acpi_sleep_tts_switch(ACPI_STATE_S5);
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block tts_notifier = {
+ .notifier_call = tts_notify_reboot,
+ .next = NULL,
+ .priority = 0,
+};
+
static int acpi_sleep_prepare(u32 acpi_state)
{
#ifdef CONFIG_ACPI_SLEEP
@@ -130,6 +161,7 @@
* failing transition to a sleep state.
*/
acpi_target_sleep_state = ACPI_STATE_S0;
+ acpi_sleep_tts_switch(acpi_target_sleep_state);
}
#endif /* CONFIG_ACPI_SLEEP */
@@ -154,6 +186,7 @@
if (sleep_states[acpi_state]) {
acpi_target_sleep_state = acpi_state;
+ acpi_sleep_tts_switch(acpi_target_sleep_state);
} else {
printk(KERN_ERR "ACPI does not support this state: %d\n",
pm_state);
@@ -199,6 +232,8 @@
break;
}
+ /* If ACPI is not enabled by the BIOS, we need to enable it here. */
+ acpi_enable();
/* Reprogram control registers and execute _BFS */
acpi_leave_sleep_state_prep(acpi_state);
@@ -295,6 +330,14 @@
DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
},
},
+ {
+ .callback = init_old_suspend_ordering,
+ .ident = "HP xw4600 Workstation",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
+ },
+ },
{},
};
#endif /* CONFIG_SUSPEND */
@@ -312,6 +355,7 @@
static int acpi_hibernation_begin(void)
{
acpi_target_sleep_state = ACPI_STATE_S4;
+ acpi_sleep_tts_switch(acpi_target_sleep_state);
return 0;
}
@@ -375,7 +419,15 @@
*/
static int acpi_hibernation_begin_old(void)
{
- int error = acpi_sleep_prepare(ACPI_STATE_S4);
+ int error;
+ /*
+ * The _TTS object should always be evaluated before the _PTS object.
+ * When the old_suspended_ordering is true, the _PTS object is
+ * evaluated in the acpi_sleep_prepare.
+ */
+ acpi_sleep_tts_switch(ACPI_STATE_S4);
+
+ error = acpi_sleep_prepare(ACPI_STATE_S4);
if (!error)
acpi_target_sleep_state = ACPI_STATE_S4;
@@ -595,5 +647,10 @@
pm_power_off = acpi_power_off;
}
printk(")\n");
+ /*
+ * Register the tts_notifier to reboot notifier list so that the _TTS
+ * object can also be evaluated when the system enters S5.
+ */
+ register_reboot_notifier(&tts_notifier);
return 0;
}
